结晶聚合物的辐照效应——Ⅰ.尼龙-1010的聚集态结构对其辐射化学反应的影响

本文用DSC,WAXD,ESR和介电谱以及凝胶分数测定等技术,研究Nylon-1010的聚集态对γ-辐射化学反应以及辐照后热处理结果的影响。结果表明,辐照Nylon-1010的交联与裂解反应主要发生在非晶区或结晶表面,进一步证明了非晶区也是辐射后交联和后裂解主要反应区。

Effect of Cl- on the corrosive wear of AISI 321 stainless steel in H2SO4 solution

The effect of Cl- on the corrosive wear behaviour of AISI 321 stainless steel in H2SO4 solution was studied via the corrosive wear rate, the load bearing capacity of passive film and the relationship between pitting and corrosive wear. There is a critical load at natural potential, below which the corrosive wear rate is slightly lowered by Cl-, while above which is increased. At natural potential there are more pits at low load than that at a higher one in the wear tracks and the pits are also deeper. The load bearing capacity is lowered by Cl- at passive region and then the corrosive wear rate increased.

Stress corrosion cracking of AISI 321 stainless steel in acidic chloride solution

The stress corrosion cracking (SCC) of LambdaISI 321 stainless steel in acidic chloride solution was studied by slow strain rate (SSR) technique and fracture mechanics method. The fractured surface was characterized by cleavage fracture. In order to clarify the SCC mechanism, the effects of inhibitor KI on SCC behaviour were also included in this paper. A study showed that the inhibition effects of KI on SCC were mainly attributed to the anodic reaction of the corrosion process. The results of strain distribution in front of the crack tip of the fatigue pre-cracked plate specimens in air, in the blank solution (acidic chloride solution without inhibitor KI) and in the solution added with KI measured by speckle interferometry (SPI) support the unified mechanism of SCC and corrosion fatigue cracking (CFC).

人工神经网络技术在板料激光弯曲中的应用

基于人工神经网络基本理论,建立在板料激光弯曲中预测材料表面最高温度、弯曲角度的BP网络模型.借助于MATLAB仿真软件中的神经网络工具箱作为开发平台,将试验样本数据和经过试验验证的数值计算结果作为补充的样本数据用于BP网络的训练,利用训练好的BP网络对非线性的样本数据规律进行拟合,实现激光加工工艺参数的优化,为实际生产和加工提供有效的依据.

Application of Optical Protein-chip in Detecting Phage M13KO7

Abstract: Avidin layer was bound on the substrate surface of Silicon wafer modified with aldehyde. The interaction between avidin and biotin was adopted for the immobilization of mouse monoclonal biotin-anti-M13 (antibody GP3)-labeled biotin. The surface was incubated in a solution containing phage M13KO7, which was trapped by the antibody GP3 with the interaction between phage M13KO7 and antibody GP3, resulting in a variation of layer thickness that was detected by imaging ellipsometry. The results showed a saturated layer of antibody GP3 with a thickness about 6.9 nm on the surface of the silicon wafer. The specific interaction between phage M13KO7 and antibody GP3 resulted in a variation of layer thickness. The layer of phage M13KO7 bound with antibody GP3 was 17.5 nm in the concentration of 1.1×1010 pfu/mL. Each variation of the layer thickness corresponded to a concentration of phage M13KO7 in the range of 0.1×1010–2.5×1010 pfu/mL, with the sensitivity of 109 pfu/mL. Compared with other methods, the optical protein-chip, requiring only short measurement time, label free, is a quantitative test, and can be visualized. This study could be significant on the interactions between the antibody and the virus, showing potential in the early diagnosis of virosis.

Electron Beam Surface Treatment. Part II: Microstructure Evolution of Stainless Steel and Aluminum Alloy During Electron Beam Rapid Solidification

Surface rapid solidification microstructures of AISI 321 austenitic stainless steel and 2024 aluminum alloy have been investigated by electron beam remelting process and optical microscopy observation. It is indicated that the morphologies of the melted layer of both stainless steel and aluminum alloy change dramatically compared to the original materials. Also, the microstructures were greatly refined after the electron beam irradiation.

A Pressure-Correction Method And Its Applications On An Unstructured Chimera Grid

In this paper, an unstructured Chimera mesh method is used to compute incompressible flow around a rotating body. To implement the pressure correction algorithm on unstructured overlapping sub-grids, a novel interpolation scheme for pressure correction is proposed. This indirect interpolation scheme can ensure a tight coupling of pressure between sub-domains. A moving-mesh finite volume approach is used to treat the rotating sub-domain and the governing equations are formulated in an inertial reference frame. Since the mesh that surrounds the rotating body undergoes only solid body rotation and the background mesh remains stationary, no mesh deformation is encountered in the computation. As a benefit from the utilization of an inertial frame, tensorial transformation for velocity is not needed. Three numerical simulations are successfully performed. They include flow over a fixed circular cylinder, flow over a rotating circular cylinder and flow over a rotating elliptic cylinder. These numerical examples demonstrate the capability of the current scheme in handling moving boundaries. The numerical results are in good agreement with experimental and computational data in literature. (C) 2007 Elsevier Ltd. All rights reserved.

A new model for the floating potential of fine particles in plasma

In the plasma processing of ultrafine particles of material, the heat transfer and force are considerably affected by particle charging. In this communication a new model, including thermal electron emission and incorporating the effect of electric field near the particle surface, is developed for metallic spherical particles under the condition of a thin plasma sheath. Based on this model, the particle floating potential, and thus the heat transfer and force, can be detemined more accurately and more realistically than previously.

具有梯度结构表层301不锈钢的压缩性能

利用表面机械研磨处理技术,在301奥氏体不锈钢中得到晶粒尺度呈梯度分布的变形表层,进行了压缩试验和微观组织观察。结果表明,变形表层中晶粒可细化至100nm。相比原始态的屈服强度236MPa,具有变形梯度表层后屈服强度增加到436MPa,变形后的加工硬化指数为0.31,经400和700℃的退火后分别增加到0.32和0.35。另外,随着应变速率的增加,流变应力增大而加工硬化能力降低.

Multistaged acceleration of ions by circularly polarized laser pulse: Monoenergetic ion beam generation

A multiple-staged ion acceleration mechanism in the interaction of a circularly polarized laser pulse with a solid target is studied by one-dimensional particle-in-cell simulation. The ions are accelerated from rest to several MeV monoenergetically at the front surface of the target. After all the plasma ions are accelerated, the acceleration process is repeated on the resulting monoenergetic ions. Under suitable conditions multiple repetitions can be realized and a high-energy quasi-monoenergetic ion beam can be obtained.

Defect analysis in Czochralski-grown Yb : FAP crystal

Growth-induced defects in Yb:FAP crystals grown by the Czochralski method have been investigated by optical microscopy, chemical etching, scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). Anisotropic etching features have been observed on two FAP crystal planes: (0001) and (1010). The shape of etch pits on the (0001) plane is hexagonal, while the etch pits on the (1010) plane have a variety of irregular shapes. It is also found that the density of etch pit varies along the boule. Based on the experimental observations, the formation mechanisnis of growth defects are discussed, and methods for reducing the growth-induced defect concentration is proposed. (c) 2005 Elsevier B.V. All rights reserved.

Stress, absorptance and laser-induced damage threshold properties of 355-nm HR coatings

A number of 355-nm Al2O3/MgF2 high-reflectance (HR) coatings were prepared by electron-beam evaporation. The influences of the number of coating layers and deposition temperature on the 355-nm Al2O3/MgF2 HR coatings were investigated. The stress was measured by viewing the substrate deformation before and after coating deposition using an optical interferometer. The laser-induced damage threshold (LIDT) of the samples was measured by a 355-nm Nd:YAG laser with a pulse width of 8 ns. Transmittance and reflectance of the samples were measured by a Lambda 900 spectrometer. It was found that absorptance was the main reason to result in a low LIDT of 355-nm Al2O3/MgF2 HR coatings. The stress in Al2O3/MgF2 HR coatings played an unimportant role in the LIDT, although MgF2 is known to have high tensile stress.

光系统II反应中心D1/D2/Cyt b559复合物的光谱特性及其光破坏作用的研究

采用柱层析法从菠菜叶绿体中分离纯化得到高等植物光系统Ⅱ(PSⅡ)反应中心色素蛋白复合体Dl/D2/Cyt b559，并对其性质，特别是光破坏作用的分子机理进行了研究。主要结果如下： 1、PSⅡ反应中心复合物所含的色素比大约为Chla／2 Pheo a=6.0。其四阶导数光谱在红区有两个峰，表明该反应中心至少存在两种结合状态的Chla。 2、Dl/D2/Cyt b559复合物的荧光相对产率及发射光谱的谱带位置与样品的浓度直接相关。只有当样品的浓度达到足够稀的程度(Chla和Pheo a总浓度小于1μg／ml)，才能得到较真实的荧光光谱，其峰位在681nm处。 3、Dl/D2/Cyt b559复合物的CD光谱在红区（Qy带）有一对反向谱带，正蜂为680nm,负峰为660nm，而在β-胡萝卜素的吸收区没有明显的CD信号。当该反应中心复合物受光破坏后，CD信号明显下降，而且当正峰完全消失后，负峰仍然存在，说明负峰不仅包含P680 的信号，也包含其它色素分子的信号，很可能有部分来源于Pheo a。 4、Dl/D2/Cyt b559复合物在488nm处激发的共振拉曼光谱显示四个主要谱带，其峰位分别在1532(ν1)、1165(ν2)、1010(ν3)和970cm-1（ν4）处，表明PSⅡ反应中心结合的B-胡萝卜素分子是全反式构型。Dl/D2/Cyt b559复合物的色素抽提液的拉曼光谱也显示四个主要的拉曼峰，其中ν4谱带的强度急剧下降，说明PSⅡ反应中心内部结合的β-胡萝卜素分子与抽提液中自由的β-胡萝卜素分子的构象不同，而与光合细菌反应中心内部的类胡萝卜素分子的构象相似，其共轭多烯链的平面也处于扭曲状态。 5、光照使PSⅡ反应中心的原初电子供体P680受到破坏，在光照后的暗放置过程中P680分子继续受到破坏，表明在光照过程中很可能有一个相对稳定的反应中间体产生，以至于光照后暗放置过程中Dl/D2/Cyt b559复合物的光谱特性继续发生变化。也就是说，PSⅡ反应中心Dl/D2/Cyt b559复合物的光破坏不是一步反应，而是一个多步反应或多条途径。 6、光照使Dl/D2/Cyt b559复合物中的组氨酸(His)残基受到很大程度的破坏，甲硫氨酸(Met）残基的含量也略有下降，而其它氨基酸的含量基本保持不变。His残基的破坏很可能与光照后暗放置过程中Dl/D2/Cyt b559复合物的光谱特性变化相关。我们认为His残基的光照破坏很可能是Dl/D2/Cyt b559复合物受光照破坏的另一分子机理。 7、人工电子受体癸基质体醌(DPQ)可以与Dl/D2/Cyt b559复合物进行重组。Dl/D2/Cyt b559复合物的荧光衰减分析表明，在DPQ重组之后，两个长寿命荧光组分（24ns和73ns）的寿命减小，而且占整个荧光的分数也下降，表明这两个长寿命荧光衰减组分均来源于电荷重组过程。同时，β-胡萝卜素分子在DPQ重组之后更易于被光照破坏，这个过程可能与β-胡萝卜素分子的生理功能相关。 8、在没有外加人工电子受体的情况下，光照使DDl/D2/Cyt b559 复合物的多肽组成发生一定变化。SDS-PAGE图谱中出现一个约40KDa的新谱带，同时Dl与D2多肽的表观分子量增加，谱带染色强度下降。 9、本文根据以上实验结果，着重对Dl/D2/Cyt b559复合物光破坏的分子机理进行了分析和讨论，并在D1蛋白裂解的两种可能途经中又增加了一个新的可能导致Dl蛋白裂解的途径，即：His残基的光照破坏可以作为Dl/D2/Cyt b559复合物光破坏及Dl蛋白裂解的又一分子机理，这为深入研究PSⅡ反应中心的光破坏提供了新的线索，也为今后研究活体内光抑制现象的分子机制打下了良好的基础

云南大山包越冬黑颈鹤迁徙路线的卫星跟踪

2005年2月26日和3月1日在云南省昭通大山包黑颈鹤国家级自然保护区,分别为4只越冬黑颈鹤佩戴卫星信号发射器(PTTs),跟踪研究其迁徙路线和迁徙停歇地.2005年春季迁徙中,有2只跟踪黑颈鹤到达繁殖地,其中1只黑颈鹤在2005年11月和2006年3月分别完成从繁殖地返回越冬地和从越冬地再次到达繁殖地的迁徙过程.2只春季迁徙黑颈鹤的迁徙路线大致相同--沿着长江上游金沙江、大渡河一直向北到达黄河上游白河及黑河沿岸若尔盖湿地内.春季迁徙过程中,途中停歇3-4次,总迁徙距离是674-713 km,迁徙全程所用时间3-4天.秋季迁徙全程所用时间8天.在4个PTTs工作期间,共确定有13个黑颈鹤迁徙停歇地,其中11个停歇地在河流滩地;其他2个停歇地在高山湖泊附近.总体上,黑颈鹤一般选择海拔在1 900 m以上湖泊、河流等湿地内,距离耕地较近且人、畜干扰较少的栖息地停歇.