黄土高原南部3种农田土壤剖面坚实度的变化规律

为了揭示黄土高原南部地区不同质地类型土壤剖面坚实度的变化及其与土壤含水率的定量关系,以黄墡土、土娄土、裸露在地表的粘化层耕作剖面为研究对象,定位观测其0~45 cm土壤坚实度与含水率的变化。结果表明,黄墡土、土娄土、裸露在地表粘化层耕作剖面的犁底层平均坚实度均大于耕层,犁底层平均坚实度较耕层分别高194.8%,87.3%,10.4%;剖面土壤质地越粘其平均坚实度越大;土壤坚实度与含水率呈负相关关系;土壤坚实度变化速率为0时,以上3种土壤剖面临界含水率分别为0.1712,0.1757,0.1835;质地不同的土壤剖面坚实度时空变化特征有差异,其中黄墡土剖面0~20 cm土层土壤坚实度为350~500 kPa,受土壤含水率变化的影响较小;20~30 cm土层土壤的坚实度为500~1400 kPa,不易受外界环境影响;30 cm以下土层土壤坚实度为700~1600 kPa,受土壤含水率变化影响较大。土娄土剖面0~40 cm土层土壤坚实度为600~1200 kPa,受含水率变化影响较大;40 cm以下土层土壤坚实度稳定在1 800 kPa左右。粘化层剖面0~15 cm土层土壤坚实度在2000 kPa左右,受环境影响较...

谁为我们预报生态安全

面对肆虐两湖平原的滔天之水,面对紧逼京门的滚滚黄沙,面对严重缺水期即将来临的警告,人们不禁要问：我们所栖息的生态系统还能够为我们提供必要的生存资源和庇护吗？

长杆弹垂直侵彻半无限厚靶板的简化模型

本文对长杆弹垂直侵彻半无限厚靶板的主要现象和过程作了分析。考虑了弹杆在侵彻过程中的破碎以及弹、板的材料性质对侵彻过程的影响,建立了一个垂直侵彻的简化计算模型,定量地描述了在侵彻半无限厚板的过程中弹杆的速度、长度和穿深的变化规律。研究的速度范围是900～1600米/秒。计算和实验结果符合较好。

过去2000年中国东部地区的极端旱涝事件变化

利用据历史文献中汉代以来的旱涝灾害记载重建的逐年旱涝等级,结合已重建的东部地区干湿指数序列,通过定义判别历史时期极端旱涝事件的标准,分华北、江淮和江南3个区域辨识了过去2000年的重大旱涝事件。结果表明,各个区域的重大旱、涝多发时段分别是:华北地区出现在100～150年、550～650年、1050～1100年与1850～1900年;江淮地区出现在250～450年与1600～1850年;江南出现在350～400年、1100～1200年与1900～1950年。整个东部地区则出现在100～150年、250～35

北方粳稻光合速率、气孔导度对光强和CO_2浓度的响应

以东北地区主栽的粳稻(Oryzasativavar.japonica)品种为对象,用美国LI-cor公司生产的Li-6400光合作用测定仪控制光强、CO2浓度和温度等环境条件,阐述了光合作用和气孔导度对光和CO2浓度的响应特征及其耦合关系。结果表明,光合速率随光强或CO2浓度的提高而增大,均遵循米氏响应;在不同CO2浓度下,表观量子效率随CO2浓度的提高而增大,但CO2浓度达到800μmol·mol-1以上时,表观量子效率有所减小;在不同光强下,表观羧化效率也随光的增强而增大,但光强达到1600μmol·

Spatio-temporal changes in annual accumulated temperature in China and the effects on cropping systems, 1980s to 2000

Change in thermal conditions can substantially affect crop growth, cropping systems, agricultural production and land use. In the present study, we used annual accumulated temperatures > 10 degrees C (AAT10) as an indicator to investigate the spatio-temporal changes in thermal conditions across China from the late 1980s to 2000, with a spatial resolution of 1 x 1 km. We also investigated the effects of the spatio-temporal changes on cultivated land use and cropping systems. We found that AAT10 has increased on a national scale since the late 1980s, Particularly, 3.16 x 10(5) km(2) of land moved from the spring wheat zone (AAT10: 1600 to 3400 degrees C) to the winter wheat zone (AAT10: 3400 to 4500 degrees C). Changes in thermal conditions had large influences on cultivated land area and cropping systems. The areas of cultivated land have increased in regions with increasing AAT10, and the cropping rotation index has increased since the late 1980s. Single cropping was replaced by 3 crops in 2 years in many regions, and areas of winter wheat cultivation were shifted northward in some areas, such as in the eastern Inner Mongolia Autonomous Region and in western Liaoning and Jilin Provinces.

Band Gap Tunable, Donor-Acceptor-Donor Charge-Transfer Heteroquinoid-Based Chromophores: Near Infrared Photoluminescence and Electroluminescence

A series of D-pi-A-pi-D type of near-infrared (NIR) fluorescent compounds based on benzobis(thia diazole) and its selenium analogues were synthesized and fully characterized by H-1 and C-13 NMR, high-resolution mass spectrometry, and elemental analysis. The absorption fluorescence, and electrochemical properties were also studied. Photoluminescence of these chromophores ranges from 900 to 1600 nm and their band gaps are between 1.19 and 0.56 eV.

Synthesis and high-pressure sintering of lanthanum magnesium hexaaluminate

Lanthanum magnesium hexaaluminate is a very important ceramic material for high temperature applications. In this paper lanthanum magnesium hexaaluminate has been synthesized directly by solid-state reaction. The forming mechanism was investigated by XRD. The SEM photographs show that the prepared powders are made of hexagonal plates. These powders can be well sintered at the high temperature (1600 degrees C) under the high pressure (4.5 GPa), and the relative density reaches 94.8%.

Laser glazing of lanthanum magnesium hexaaluminate

Lanthanum magnesium hexaalumminate (LMA) is an important candidate for thermal barrier coatings due to its thermal stability and low thermal conductivity. On the other hand, laser glazing method can potentially make thermal barrier coatings impermeable, resistant to corrosion on the surface and porous at bulk. LMA powder was synthesized at 1600 degrees C by solid-state reaction, pressed into tablet and laser glazed with a 5-kW continuous wave CO2 laser.

Self-Assembled Growth of Agln(MoO4)(2) Submicroplates into Hierarchical Structures and Their Near-Infrared Luminescent Properties

Layer-controlled hierarchical flowerlike AgIn(MoO4)(2) microstructures with "clean" surfaces using submicroplates as building blocks without introducing any template have been fabricated through a low-cost hydrothermal method. The near-infrared luminescence of lanthanide ion (Nd, Er, and Yb) doped AgIn(MoO4)(2) microstructures, in the 1300-1600 nm region, was discussed and is of particular interest for telecommunication applications. X-ray diffraction, scanning electron microscopy, transmission electron microscopy, electron diffraction, and photoluminescence spectra were used to characterize these materials.

CuIn(WO4)(2) nanospindles and nanorods: controlled synthesis and host for lanthanide near-infrared luminescence properties

CuIn(WO4)(2) porous nanospindles and nanorods were synthesized through a low-cost hydrothermal method without introducing any template or surfactants. An interesting formation mechanism, namely "oriented attachment", was observed for the growth of nanorods based on the experimental process and the anisotropic intrinsic crystalline structure of CuIn(WO4)(2), which is uncommon in such a system. The near-infrared luminescence of lanthanide ions (Er, Nd, Yb and Ho) doped CuIn(WO4)(2) nanostructures, especially in the 1300-1600 nm region, was discussed and of particular interest for telecommunications applications. X-Ray diffraction, scanning electron microscopy, transmission electron microscopy, electron diffraction and photoluminescence spectra were used to characterize these materials.

High-pressure sintering study of a novel hard material (W0.5Al0.5)C-0.5 without binder metal

A novel hard material of (W0.5Al0.5)C-0.5 has been successfully sintered under high-pressure (4.5 GPa). The influence of sintering time and temperature on the microstructure, Vickers microhardness and density of the as-prepared specimens are well described. Interestingly, sintering temperature has an amazing influence on the hardness, density and microstructure of the specimen while the sintering time does not. It is found that the most suitable sintering condition from our work is 1600 degrees C and 10 min under pressure of 4.5 GPa. The hardness and relative density of the as-prepared sample can reach 2340 kg mm(-2) and 98.62%, respectively. The cell parameters of the sintered specimen is found to be little smaller than that of the powder, which we propose is related to the high pressure.

Thermal analysis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) irradiated under vacuum

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was irradiated by Co-60 gamma-rays (doses of 50, 100 and 200kGy) under vacuum. The thermal analysis of control and irradiated PHBV, under vacuum was carried out by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The tensile properties of control and irradiated PHBV were examined by using an Instron tensile testing machine. In the thermal degradation of control and irradiated PHBV, a one-step weight loss was observed. The derivative thermogravimetric curves of control and irradiated PHBV confirmed only one weight-loss step change. The onset degradation temperature (T-o) and the temperature of maximum weight-loss rate (T-p) of control and irradiated PHBV were in line with the heating rate (degreesC min(-1)). T-o and T-p of PHBV decreased with increasing radiation dose at the same heating rate. The DSC results showed that Co-60 gamma-radiation significantly affected the thermal properties of PHBV. With increasing radiation dose, the melting temperature (T-m) of PHBV shifted to a lower value, due to the decrease in crystal size. The tensile strength and fracture strain of the irradiated PHBV decreased, hence indicating an increased brittleness.

一种小晶粒FeZSM5沸石分子筛的制备方法

一种小晶粒FeZSM5沸石分子筛的制备方法，以含硅物质、无机铁盐、无机钠盐、有机胺类、无机酸和无离子水为原料，各组分的组成(摩尔比)为Fe3+:SiO2:Na2O:Na+:R:H2O＝1:(90-1600):(8.3－13):(13－25):(25－40):(2500－4000)采用水热合成法，在搅拌速度400－500转/分钟、以2℃/分钟的速率由室温升至100－140℃，恒温130小时，完成结晶，然后降温、过滤、洗涤、烘干、焙烧得到晶粒小于1μm分子筛，不需要重复交换一次完成，制备简单。