Preparation and luminescence properties of hybrid materials containing europium(III) complexes covalently bonded to a silica matrix

A new kind of luminescent organic-inorganic hybrid material (denoted Hybrid I) consisting of europium 1,10-phenanthroline complexes covalently attached to a silica-based network was prepared by a sol-gel process. 1,10-Phenanthroline grafted to 3-(triethoxysilyl)propyl isocyanate was used as one of the precursors for the preparation of an organic-inorganic hybrid materials. For comparison purposes, the hybrid material (denoted Hybrid II) in which phenanthroline was not grafted onto the silica backbone of the frameworks was also prepared. Elemental analysis; NMR, FT-IR, UV/vis absorption, and luminescence spectroscopies, and luminescence decay analysis were used to characterize the obtained hybrid materials. It is shown that the homogeneity of Hybrid I is superior to that of Hybrid II, and a higher concentration europium can be incorporated into Hybrid I than Hybrid II. Excitation at the ligand absorption wavelength (283 nm) resulted in the strong emission of the Eu3+ D-5(0)-F-7(J) (J = 0-4) transition lines as a result of the efficient energy transfer from the ligands to the EU3+ in Hybrid I. The number of water molecules coordinated to the europium ion was estimated, and the structure of the as-synthesized Hybrid I was predicted on the basis of the experimental results.

Electroluminescence based on a beta-diketonate ternary samarium complex

The triplet energy state of the HTH [HTH: 4,4,5,5,6,6,6-heptafluoro-1-(2-thienyl) hexane-1,3-dione] ligand was measured to be 20 400 cm(-1), which indicated that Sm(HTH)(3) phen (phen: 1,10-phenanthroline) is a good complex to produce strong PL intensity and high fluorescence yield. Electroluminescent (EL) devices using the Sm( HTH) 3 phen complex as the emissive center were fabricated by vapor deposition and spin-coating methods. The relative intensity of the EL spectra changed compared to the photoluminescence (PL) spectrum, which suggested that the luminescence mechanisms of PL and EL have differences. A luminance of 9 cd m(-2) and a higher brightness of 21 cd m(-2) were obtained from the devices ITO/TPD (40 nm)/ Sm( HTH)(3) phen (50 nm)/ PBD (30 nm)/ Al (200 nm) and ITO/PVK (40 nm)/ PVK : Sm( HTH)(3) phen (2.5 wt%, 50 nm)/ PBD (30 nm)/ Al (200 nm), respectively.

Synthesis and characterization of two novel [Ru(bpy)(2)(phen)](2+)-based electrochemiluminescent labels

Two novel electrochemiluminescent labels, bis(2,2'-bipyridine)[5-(3-carboxylic acid-propionamido)1,10-phenanthroline]ruthenium(II) hexafluorophosphate dihydrate and bis(2,2'-bipyridine)[5-(4-carboxylic acid-butanamido)-1,10-phenanthroline]ruthenium(II) hexafluorophosphate dihydrate, were synthesized and confirmed by IRelemental analysis, and H-1-NMR spectra were completely assigned using the (HH)-H-1-H-1 COSY technique. Cyclic voltammograms with different scan rates showed quasireversible electrochemical behaviour of the two Ru (II) complex labels in MeCN solution. Electronic absorption, photoluminescence and electrochemiluminescence of Ru(II) complexes were also characterized. Copyright (C) 2000 John Wiley & Sons, Ltd.

Investigation of proton transfer across the water/1,2-dichloroethane interface by o-phenanthroline using glass micro/nano-pipets and cyclic voltammetry

Facilitated proton transfer across the water/1,2-dichloroethane (DCE) interface supported on the tips of micro- and nano-pipets by o-phenanthroline (Phen) was studied by using cyclic voltammetry. The formed micro- and nano-liquid/liquid interfaces functioned as micro- and nano-electrodes under certain experimental conditions. The dependence of the half-wave potentials on the aqueous solutions acidities was studied and the ratio of association constants between Phen and proton in the aqueous and DCE phases was calculated by the method proposed by Matsuda et al.. The standard rate constant (k(0)) and the transfer coefficient (alpha) evaluated by using nano-pipets were equal to 0.183 +/- 0.054 cm/s and 0.70 +/- 0.09, respectively.

A comparative study on the electroluminescence properties of some terbium beta-diketonate complexes

By comparing the phosphorescence spectra of Gd(acac)(3) (acac=acetylacetone), Gd(TFacac)3 (TFacac=1,1,1-trifluoroacetylacetone), the effects of fluorine replacement of hydrogen on the triplet state energy of the ligands were revealed. Fluorine can lower the triplet state energy of Hacac and make it more suitable for energy transfer towards the D-5(4) state of terbium. Organic electroluminescent devices (OELDs) with the corresponding trivalent terbium complexes as emissive layers were fabricated. Triple-layer-type devices with a structure of glass substrate/ITO (indium tin oxide)/PVK [poly(N-vinylcarbazole)]/PVK : Tb complex: PBD [2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole]/PBD/Al exhibit bright green luminescence upon applying a dc voltage. The luminance of a device with Tb(TFacac)(3)phen (1,10-phenanthroline) and Tb( TFacac) 3 as emissive layer is higher than that of the corresponding devices with Tb(acac)(3)(phen) and Tb(acac)(3) as emissive layers. The EL device with Tb(TFacac)(3)(phen) as emitter exhibits characteristic emission of Tb3+ ions with a maximum luminance of 58 cd m(-2) at 25 V.

Synthesis and chemical properties of [Z]-1-[2-(triaryl stannyl)vinyl]cyclooctanol

The compounds of [Z]-1-[2-(triphenyl stannyl) vinyl] cyclooctanol (1) and [Z]-1-[2-(tri-p-tolyl stannyl) vinyl] cyclooctanol (2) were synthesized by the reactions of triphenyltin hydride and tri-p-tolyltin hydride with 1-ethynyl cyclooctanol. The crystal structure of compound 1 was determined. The reactions of compound 1 and 2 with IC1, Br-2, I-2 formed nine organotin halides. The organotin oxide or hydroxide were prepared by the reactions of [Z]-1-[2-(phenyl dibromo stannyl) vinyl] cyclooctanol (6) and [Z]-1-[2-(diphenyl monobromo stannyl) vinyl] cyclooctanol (5) with KOH. Three complexes were obtained by the reactions of [Z]-1-[2-(phenyl diiodide stannyl) vinyl] cyclooctanol (8) with three ligands (2,2'-bipyridyl,5-nitro-1,10-phenanthroline,8-Hydroxyquinoline). The sixteen new compounds synthesized in this paper were characterized by means of elemental analysis, IR, H-1 NMR. The reaction mechanism of triphenyltin hydride and tri-p-tolyltin hydride with 1-ethynyl cyclooctanol were also proposed.

Phenol hydroxylation by iron(II) phenanthroline: The reaction mechanism

Phenol hydroxylation catalyzed by iron(II)-1,10-phenanthroline is investigated through kinetics, ESR, W-Vis as well as cyclic voltammogram studies. The optimum reaction conditions are obtained for diphenols production. Radical substitution mechanism is first proposed to explain the effects of pH, reaction medium and other factors on the phenol hydroxylation with H2O2 as oxidant, and found that the coexisting of iron(II)-1,10-phenanthroline and iron(III)-1,10-phenanthroline is the key for phenol hydroxylation to occur with H2O2 as oxygen donor.

A BINUCLEAR NICKEL(II) COMPLEX CONTAINING AN OXAMIDO-BRIDGE - SYNTHESIS, PROPERTIES AND X-RAY CRYSTAL-STRUCTURE OF [NI(OXAE)NI(PHEN)(2)](CLO4)(2)CENTER-DOT-3H2O

The binuclear complex [Ni(oxae)Ni(phen)2](ClO4)(2) . H2O (oxae=N,N'bis(2-aminoethyl) oxamido dianion, phen = 1, 10-phenanthroline) was prepared from the planar monomeric complex Ni(oxae) and characterized through analytical and spectroscopic measurements. The structure of [Ni(oxae)Ni(phen)(2)] (ClO4)2 . 3H(2)O was investigated by single-crystal X-ray analysis. The complex has an extended oxamido-bridged structure and consists of two nickel(II) ions, one of them in a square planar environment and another in a distorted octahedral environment. The Ni-Ni distance is 5.267 Angstrom.

促进剂对高碳数碳氢燃料点火特性的影响

在JP-10和煤油点火特性激波管实验基础上,进行了促进剂CH_3NO_2、CH_2Cl_2对JP-10和煤油点火特性影响的实验.在预加热激波管上采用缝合运行技术,获得了近7ms的实验时间.采用单色仪和光电倍增管记录点火过程中OH自由基在306.5nm发射谱强度变化作为点火发生的判据.当促进剂加入量约为JP-10的10%～20%(摩尔比),质量比为5%～12%时,实验观测到明显的点火促进作用.在1100K时,添加10%(摩尔比)CH_3NO_2使JP-10的点火延时时间缩短了70%.当CH_3NO_2的加入量占煤油的10%～15%(摩尔比),质量比约为5%～6%时,对煤油点火有明显的促进作用,在1000K时使煤油点火延时时间缩短了50%.

理性力学基础

《理性力学基础》为《中国科学院研究生教学丛书》之一。
    《理性力学基础》系统地介绍了理性力学的主要科学体系和基本理论。《理性力学基础》由四部分，共十五章组成。第一部分综合介绍了理性力学的科学意义、方法和特点，从理性力学角度概括论述变形几何学与运动学、力学基本定律与场方程以及本构方程的一般原理。着重阐明张量和场方程的时空无差异原理，以及本构方程所应遵循的客观性原理。第二部分着重介绍简单物质的理论体系。作为典型范例进一步阐明弹性物质和简单流体的本构方程以及弹性体有限变形边值问题的分析方法。第三部分详细介绍黏弹性物质、弹塑性物质及晶体塑性的基本理论。第四部分主要介绍含缺陷物质的本构理论。
    《理性力学基础》可作为力学、应用数学、理论物理等专业的研究生教材，也可供力学工作者及高等院校力学专业教师参考。

目录 

第一章 绪论
1·1 理性力学目的和意义
1·2 理性力学的特点与体系
1·3 理性力学的方法
1·4 符号
第二章 变形几何学和运动学
2·1 直角坐标系的张量
2·2 物体的构形与运动
2·3 变形梯度
2·4 应变度量和面元、体元变形
2·5 应变率
第三章 基本定律与场方程
3·1 质量守恒定律
3·2 应力原理与动量守恒定律
3·3 能量守恒定律和熵定律
3·4 功共轭与应力度量
3·5 场方程
3·6 随体坐标系
第四章 本构方程的一般原理
4·1 时空系的变换
4·2 基本定律的客观性
4·3 本构方程的一般原理
第五章 简单物质
5·1 张量函数
5·2 张量函数表示定理
5·3 简单物质的本构方程
5·4 本构方程的简化形式
5·5 各向同性物质
5·6 简单固体
5·7 简单流体和流晶
5·8 内部约束
5·9 特殊类型物质
5·10 衰退记忆
第六章 弹性物质
6·1 弹性物质的本构方程
6·2 物质对称性
6·3 各向同性弹性固体
6·4 超弹性物质
6·5 各向同性超弹性物质
6·6 主轴表示
6·7 储能函数表示式
6·8 二次弹性
6·9 均匀变形场
6·10 储能函数的实验确定
第七章 弹性体有限变形边值问题
7·1 边值问题的提法
7·2 若干典型问题
7·3 平面应变问题
7·4 不可压缩各向同性弹性体
第八章 简单流体
8·1 直线流动
8·2 曲线流动
8·3 伸长历史恒定运动
8·4 定常测黏流动
8·5 Poiseuille流动
8·6 Couette流动
8·7 圆锥-平板流动
8·8 端部正应力效应
8·9 Stokes流体测黏流动
8·10 定常拉伸流动
第九章 黏弹性物质
9·1 线性黏弹性理论
9·2 非线性黏弹性固体
9·3 本构泛函展开
9·4 非线性黏弹性流体
第十章 弹塑性物质
10·1 微小变形塑性理论
10·2 张量的时间导数
10·3 有限塑性变形的本构方程
10·4 塑性大变形基本方程
10·5 Drucker公设与有限塑性变形
第十一章 晶体塑性理论
11·1 晶体塑性变形运动学
11·2 硬化规律
11·3 硬化系数表示式
11·4 晶体塑性本构关系
11·5 滑移剪切率γ(α)的存在性与惟一性
11·6 率相关流动规律
第十二章 缺陷连续统的线性理论
12·1 张量场的微分运算
12·2 协调条件
12·3 缺陷的几何意义
12·4 位错弹性理论
12·5 位错塑性理论
12·6 一般缺陷塑性理论
12·7 晶体塑性位错理论
12·8 Nye张量及缺陷塑性理论小结
12·9 位错塑性理论二维公式及算例
第十三章 非黎曼几何及流形简介
13·1 Euler空间张量场的绝对微分
13·2 曲率张量
13·3 线性空间
13·4 仿射联络空间
13·5 非完整变换
13·6 拓扑空间
13·7 微分流形
第十四章 缺陷连续统的非线性理论
14·1 非Niemann物质流形的构造
14·2 缺陷的几何意义
14·3 缺陷连续统的弹性理论
14·4 缺陷连续统的塑性理论
14·5 晶体塑性位错理论
第十五章 理性力学若干应用
15·1 有限变形的精确描述
15·2 曲线坐标的相应公式
15·3 本构方程的客观性原理
15·4 物质对称性
15·5 主轴法
15·6 客观应力率
附录 曲线坐标
1 基向量与度量张量
2 逆变导数
3 应力张
4 运动方程

 

Boiling heat transfer enhancement by using micro-pin-finned surface for electronics cooling

For efficiently cooling electronic components with high heat flux, experiments were conducted to study the flow boiling heat transfer performance of FC-72 over square silicon chips with the dimensions of 10 × 10 × 0.5 mm3. Four kinds of micro-pin-fins with the dimensions of 30 × 60, 30 × 120, 50 × 60, 50 × 120 μm2 (thickness, t × height, h) were fabricated on the chip surfaces by the dry etching technique for enhancing boiling heat transfer. A smooth surface was also tested for comparison. The experiments were made at three different fluid velocities (0.5, 1 and 2 m/s) and three different liquid subcoolings (15, 25 and 35 K). The results were compared with the previous published data of pool boiling. All micro-pin-fined surfaces show a considerable heat transfer enhancement compared with a smooth surface. Flow boiling can remarkably decrease wall superheat compared with pool boiling. At the velocities lower than 1 m/s, the micro-pin-finned surfaces show a sharp increase in heat flux with increasing wall superheat. For all surfaces, the maximum allowable heat flux, qmax, for the normal operation of LSI chips increases with fluid velocity and subcooling. For all micro-pin-finned surfaces, the wall temperature at the critical heat flux (CHF) is less than the upper limit for the reliable operation of LSI chips, 85◦C. The largest value of qmax can reach nearly 148 W/cm2 for micro-pin-finned chips with the fin height of 120 μm at the fluid velocity of 2 m/s and the liquid subcooling of 35 K. The perspectives for the boiling heat transfer experiment of the prospective micro-pin-finned sur- faces, which has been planned to be made in the Drop Tower Beijing/NMLC in the future, are also presented.

基于U形塑料光纤的氧气传感器

报道了一种基于荧光猝灭原理的光纤氧气传感器.采用塑料光纤作为传感和传光元件进行氧气传感,传感头制成U形.以邻菲咯啉钌作为荧光标记物,用溶胶-凝胶法制备敏感材料.采用相移法来实现对荧光寿命的测定.测量了不同弯曲半径传感头对氧气传感的灵敏度,发现当U形光纤的弯曲半径较小时系统的灵敏度较高.对荧光寿命和氧气浓度的关系进行了测量,发现二者呈亚线性关系,提出双荧光体模型解释这一实验现象.

基于U型塑料光纤和邻啡咯啉钌的溶解氧传感器

本文提出了一种基于U型塑料光纤和邻啡咯啉钌的溶解氧传感器。光纤传感头放在样品池中，测量了不同氮氧体积比情况下荧光强度和寿命。研究了邻啡咯啉钌的浓度、传感头的退火时间和U型光纤的弯曲半径对系统灵敏度的影响。我们提出了双层模型来解释实验结果不符合S-V方程的实验现象，并用双层模型分析了弯曲半径对系统灵敏度的影响。通过对溶解氧浓度和荧光寿命亚线性曲线的拟合，我们得出敏感层的厚度和S-V系数分别为0.59和0.61。

Characterization of a dissolved oxygen sensor made of plastic optical fiber coated with ruthenium-incorporated solgel

A dissolved oxygen sensor made of plastic optical fiber as the substrate and dichlorotris (1, 10-phenanthroline) ruthenium as a fluorescence indicator is studied. Oxygen quenching characteristics of both intensity and phase were measured; the obtained characteristics showed deviation from the linear relation described by the Stern-Volmer equation. A two-layer model is proposed to explain the deviation, and main parameters can be deduced with the model. (C) 2009 Optical Society of America

Ag~+-Li~+离子交换制作Er~(3+)/Yb~(3+)共掺磷酸盐玻璃平面光波导(英文)

制备了化学稳定的Er^3＋／Yb^3＋共掺的磷酸盐玻璃，并在其中制作了用于光放大器和激光器的平面光波导．这种磷酸盐玻璃的失重速率为4．7×10^-5g·cm^-2·hr^-1，小于Kigre公司商业化的磷酸盐玻璃QX／Er的失重速率．采用Ag^＋-Li^＋交换技术制作了平面光波导并用m-线光谱在632．8nm测量了平面光波导的有效折射率．根据反WKB法得到折射率形貌，计算了离子交换参数如：离子交换深度、表面折射率，折射率改变和扩散系数等．