Application of rough set-based analysis to extract spatial relationship indicator rules: An example of land use in Pearl River Delta

Spatial relations, reflecting the complex association between geographical phenomena and environments, are very important in the solution of geographical issues. Different spatial relations can be expressed by indicators which are useful for the analysis of geographical issues. Urbanization, an important geographical issue, is considered in this paper. The spatial relationship indicators concerning urbanization are expressed with a decision table. Thereafter, the spatial relationship indicator rules are extracted based on the application of rough set theory. The extraction process of spatial relationship indicator rules is illustrated with data from the urban and rural areas of Shenzhen and Hong Kong, located in the Pearl River Delta. Land use vector data of 1995 and 2000 are used. The extracted spatial relationship indicator rules of 1995 are used to identify the urban and rural areas in Zhongshan, Zhuhai and Macao. The identification accuracy is approximately 96.3%. Similar procedures are used to extract the spatial relationship indicator rules of 2000 for the urban and rural areas in Zhongshan, Zhuhai and Macao. An identification accuracy of about 83.6% is obtained.

A Unified Tensor Level Set for Image Segmentation

This paper presents a new region-based unified tensor level set model for image segmentation. This model introduces a three-order tensor to comprehensively depict features of pixels, e.g., gray value and the local geometrical features, such as orientation and gradient, and then, by defining a weighted distance, we generalized the representative region-based level set method from scalar to tensor. The proposed model has four main advantages compared with the traditional representative method as follows. First, involving the Gaussian filter bank, the model is robust against noise, particularly the salt-and pepper-type noise. Second, considering the local geometrical features, e. g., orientation and gradient, the model pays more attention to boundaries and makes the evolving curve stop more easily at the boundary location. Third, due to the unified tensor pixel representation representing the pixels, the model segments images more accurately and naturally. Fourth, based on a weighted distance definition, the model possesses the capacity to cope with data varying from scalar to vector, then to high-order tensor. We apply the proposed method to synthetic, medical, and natural images, and the result suggests that the proposed method is superior to the available representative region-based level set method.

A Relay Level Set Method for Automatic Image Segmentation

This paper presents a new image segmentation method that applies an edge-based level set method in a relay fashion. The proposed method segments an image in a series of nested subregions that are automatically created by shrinking the stabilized curves in their previous subregions. The final result is obtained by combining all boundaries detected in these subregions. The proposed method has the following three advantages: 1) It can be automatically executed without human-computer interactions; 2) it applies the edge-based level set method with relay fashion to detect all boundaries; and 3) it automatically obtains a full segmentation without specifying the number of relays in advance. The comparison experiments illustrate that the proposed method performs better than the representative level set methods, and it can obtain similar or better results compared with other popular segmentation algorithms.

QTL Mapping for Frond Length and Width in Laminaria japonica Aresch (Laminarales, Phaeophyta) Using AFLP and SSR Markers

In Laminaria japonica Aresch breeding practice, two quantitative traits, frond length (FL) and frond width (FW), are the most important phenotypic selection index. In order to increase the breeding efficiency by integrating phenotypic selection and marker-assisted selection, the first set of QTL controlling the two traits were determined in F-2 family using amplified fragment length polymorphism (AFLP) and simple sequence repeat (SSR) markers. Two prominent L. japonicas inbred lines, one with "broad and thin blade" characteristics and another with "long and narrow blade" characteristics, were applied in the hybridization to yield the F-2 mapping population with 92 individuals. A total of 287 AFLP markers and 11 SSR markers were used to construct a L. japonica genetic map. The yielded map was consisted of 28 linkage groups (LG) named LG1 to LG28, spanning 1,811.1 cM with an average interval of 6.7 cM and covering the 82.8% of the estimated genome 2,186.7 cM. While three genome-wide significant QTL were detected on LG1 (two QTL) and LG4 for "FL," explaining in total 42.36% of the phenotypic variance, two QTL were identified on LG3 and LG5 for the trait "FW," accounting for the total of 36.39% of the phenotypic variance. The gene action of these QTL was additive and partially dominant. The yielded linkage map and the detected QTL can provide a tool for further genetic analysis of two traits and be potential for maker-assisted selection in L. japonica breeding.

A set of polymorphic microsatellite loci for the bay scallop, Argopecten irradians

The method of creating enriched microsatellite libraries can supply an abundant source of microsatellite sequences at a considerably reduced cost. Here we report the development of 15 polymorphic microsatellite loci from the bay scallop, Argopecten irradians, using enrichment protocol. Polymorphism was assessed in a sample of hatchery population (n = 38) revealing three to seven alleles per locus. The expected and observed heterozygosities ranged from 0.198 to 0.813 and from 0.083 to 0.833, respectively. These markers will be useful for genetic variation monitoring and parentage analysis.

Prediction of marine sediment corrosion by fuzzy clustering analysis

Along with the development of marine industries, especially marine petroleum exploitation, more and more pipelines are buried in the marine sediment. It is necessary and useful to know the corrosion environment and corrosiveness of marine sediment. In this paper, field corrosion environmental factors were investigated in Liaodong Bay marine sediment containing sulfate-reducing bacteria (SRB) and corrosion rate of steel in the partly sediment specimens were determined by the transplanting burying method. Based on the data, the fuzzy clustering analysis (FCA) was applied to evaluate and predict the corrosiveness of marine sediment. On that basis, the influence factors of corrosion damage were discussed.

An application of the analytic hierarchy process and fuzzy logic inference in a decision support system for forage selection

Forage selection plays a prominent role in the process of returning cultivated lands back into grasslands. The conventional method of selecting forage species can only provide attempts for problem-solving without considering the relationships among the decision factors globally. Therefore, this study is dedicated to developing a decision support system to help farmers correctly select suitable forage species for the target sites. After collecting data through a field study, we developed this decision support system. It consists of three steps: (1) the analytic hierarchy process (AHP), (2) weights determination, and (3) decision making. In the first step, six factors influencing forage growth were selected by reviewing the related references and by interviewing experts. Then a fuzzy matrix was devised to determine the weight of each factor in the second step. Finally, a gradual alternative decision support system was created to help farmers choose suitable forage species for their lands in the third step. The results showed that the AHP and fuzzy logic are useful for forage selection decision making, and the proposed system can provide accurate results in a certain area (Gansu Province) of China.

基于模糊神经网络的人脸识别方法研究

人脸识别是模式识别研究领域的重要课题,具有广阔的应用前景。本文提出了基于模糊神 经网络的人脸识别方法。首先用最优鉴别分析方法提取人脸的最优鉴别矢量集,构成特征空间,然后在 特征空间中设计模糊神经网络分类器。在ORL人脸图象库上的实验结果表明了该方法的有效性。

具有不完全微分的Fuzzy-GA PID控制器及其在智能仿生人工腿中的应用

以模糊推理和遗传算法为基础，提出了一种新的具有不完全微分的最优PID控制器的设计方法，该控制器由离线和在线两部分组成，在离线部分，以系统响应的超调量、上升时间以及调整时间为性能指标，利用遗传算法搜索出一组最优的PID参数Kp^*、Ti^*和Td^*，作为在线部分调整的初始值，在在线部分，一个专用的PID参数优化程序以离线部分获得Kp^*、Ti^*和Td^*为基础，根据系统当前的误差e和误差变化率e^.，通过一个模糊推理系统在线调整系统瞬态响应的PID参数，以确保系统的响应具有最优的动态和稳态性能．该控制器已被用来控制由作者设计的智能仿生人工腿中的执行电机．计算机仿真结果表明，该控制器具有良好的控制性能和鲁棒性能。

Optimal Fuzzy PID Controller with Incomplete Derivation and Its Simulation Research on Application of Intelligent Artificial Legs

提出了一种新的最优模糊PID控制器，它由两部分组成，即在线模糊推理机构和带有不完全微分的常规PID控制器，在模糊推理机构中，引入了三个可调节因子xp,xi和xd，其作用是进一步修改和优化模糊推理的结果，以使控制器对一个给定对象具有最优的控制效果，可调节因子的最优值采用ITAE准则及Nelder和Mead提出的柔性多面体最优搜索算法加以确定，这种PID控制器被用来控制由作者设计的智能人工腿中的一个直流电机，仿真结果表明该控制器的设计是非常有效的，它可被用于控制各种不同的对象和过程。

Fuzzy层次神经网络

本文提出和归纳了Ｆｕｚｚｙ前馈神经网络模型，并提出了Ｆｕｚｚｙ前馈神经网络的反向传播学习算法，模拟结果表明利用ＦｕｚｚｙＢＰ学习算法训练的Ｆｕｚｚｙ前馈神经网络具有较好的非逻辑归纳能力和Ｆｕｚｚｙ规则表达能力。