Magnetic properties of sintered sm2fe17ny magnets

Sintered magnets of Sm2Fe17Ny nitrides, with a density of 6.0-7.4 g/cm3, have been prepared by using an explosion technique. Both crystalline structure and the magnetic properties of Sm2Fe17Ny nitrides were retained in the process. The sintered magnet had a remanence B(r)=0.83 T, an intrinsic coercivity mu(0i)H(c)=0.57 T and an energy product (BH)max=88 kJ/m3. The temperature dependence of coercivity and remanence were also measured. The temperature coefficients alpha of remanence and beta of coercivity are -0.076%/degrees-C and -0.51%/degrees-C, respectively.

高能、含铝和温压炸药爆炸抛撒实验研究

采用高速运动分析系统观察了高能炸药、含铝炸药和温压炸药爆炸产物抛撒的过程;分析比较了三种炸药的爆炸产物抛撒运动及后燃特点,得到了温压炸药具有爆炸和后燃二个过程,爆炸场范围大,温度高,后燃持续时间长;高能炸药与温压炸药相比爆炸场范围小,温度低,几乎没有后燃过程;含铝炸药介于温压炸药和高能炸药之间。

室内泄漏燃气浓度分布的一个量级估算方法

在对室内液化石油气泄漏流动过程进行量级估算分析的基础上,提出了一种预测室内泄漏液化石油气浓度分布的简化方法.并结合一次居民室内液化气爆炸事故,讨论了此方法在实际应用中的简易可行性.

温压炸药爆炸抛撒的运动规律

采用高速运动分析系统观察了高能炸药、含铝炸药和温压炸药爆炸产物抛撒的过程;比较了这3种炸药的爆炸产物抛撒运动及后燃特点,通过比较直观地观察到温压炸药爆炸和后燃2个过程,以及后燃火球的成长历程,根据实验结果确定了温压炸药爆炸产物抛撒半径随时同变化的数学表达式.

柱形容器开口泄爆过程中的火焰传播特性

泄爆过程中流动与燃烧的相互作用机制是研究开口泄爆问题的关键.对柱形容器泄爆过程中压力与火焰发展传播过程的观测与分析表明,不同泄爆条件下压力与火焰的发展传播具有明显特点.泄爆诱导流动通过加速火焰传播、加剧火焰变形、增大火焰面积对容器内燃烧产生增强作用,泄爆流动大小主要由泄爆面积决定.小口中低压泄爆过程压力与火焰的发展过程与封闭燃烧中类似;小口高压以及大口泄爆过程中,火焰变形剧烈,传播速度明显上升,并导致压力的回升.

爆炸容器内冲击波系演化及壳体响应的数值研究

对中心装药爆炸后冲击波的产生、传播和壳体动态响应全过程进行了数值研究。认为RDX瞬时爆炸，爆炸近场采用自相似解；冲击波传播和波系演化采用PPM(the Piecewise Parabolic Method)格式求解Euler方程；壳体响应采用有限元方法求解拉氏坐标系下由虚功原理得到的动力学方程。壳体内壁面边界条件分别采用强耦合和弱耦合方法处理。结果表明：（1）当装药量相同时，薄壁壳体振型比厚壁宙体复杂得多，振幅也大；（2）当装药量不同，壳体厚度相同时，爆炸场冲击波的演化过程不同；（3）对少量装药，产生的冲击波强度低，壳体变形小，是否考虑内边界运动，对计算结果的影响不大；（4）在本文条件下，爆炸容器封头顶点所受的载荷最大，是取易发生破坏的地方，侧壁与爆点所在横截面的交线，也易破坏。

隧道开挖方式对建筑物桩基影响的数值模拟分析

运用岩石破裂与失稳过程分析RFPA~(2D)系统以及FLAC~(2D)程序对广州地铁二号线隧道通过电化教育学院录音楼引起建筑物桩基的变形与力学特性进行研究。RFPA~(2D)系统视材料为非均匀损伤材料,考虑修正后的Mohr-Coulomb准则(包含拉伸截断)作为单元破坏的强度判据,研究不同隧道开挖方式对建筑物桩基和地面移动的影响。分析表明,RFPA~(2D)系统是研究地表移动和破坏机理的适用工具。

Slope Stability Analysis Using Anisotropic and Nonlinear Failure Criteria

The shear strength of soils or rocks developed in a landslide usually exhibits anisotropic and nonlinear behavior. The process of sedimentation and subsequent consolidation can cause anisotropy of sedimentary soils or rocks, for instance. Nonlinearity of failure envelope could be attributed to "interlocking" or "dilatancy" of the material, which is generally dependent upon the stress level. An analytical method considering both anisotropy and nonlinearity of the failure envelops of soil and rocks is presented in the paper. The nonlinearfailure envelopes can be determined from routine triaxial tests. A spreadsheet program, which uses the Janbu's Generalized Procedure of Slice and incorporates anisotropic, illustrates the implementation of the approach and nonlinearfailure envelops. In the analysis, an equivalent Mohr-Coulomb linear failure criterion is obtained by drawing a tangent to the nonlinear envelope of an anisotropic soil at an appropriate stress level. An illustrative example is presented to show the feasibility and numerical efficiency of the method.

A New Model for Sediment Transport

The problem of predicting sediment transportation by water waves is treated analytically with the rate of wave energy dissipation or wave damping. With resorting to the theory of shallow water waves and the basis of Yamamoto’s Coulomb-damped poroelastic model, the Boussinesq-type equation has been derived over a variation depth bed. For convenience Cnoidal wave is just discussed, The Cnoidal wave with complex wave length and wave velocity, which are as a function of wave frequency, water depth, permeability, Poisson’s ratio and complex elastic moduli of bed soil, is applied to analyse the rate of sediment transportation. Considering the sediment transportation depended on the shear stress near-bed or the horizontal velocity, the conclusion of Yamamoto’s experiment in clay bed has been extended to general situation. It could be figured out that the model should provide a method to avoid the undistinguishable factors during sediment transport processes and relate mass transport with the sediment peculiarities.

Catastrophic Rupture Induced Damage Coalescence in Heterogeneous Brittle Media

In heterogeneous brittle media, the evolution of damage is strongly influenced by the multiscale coupling effect. To better understand this effect, we perform a detailed investigation of the damage evolution, with particular attention focused on the catastrophe transition. We use an adaptive multiscale finite-element model (MFEM) to simulate the damage evolution and the catastrophic failure of heterogeneous brittle media. Both plane stress and plane strain cases are investigated for a heterogeneous medium whose initial shear strength follows the Weibull distribution. Damage is induced through the application of the Coulomb failure criterion to each element, and the element mesh is refined where the failure criterion is met. We found that as damage accumulates, there is a stronger and stronger nonlinear increase in stress and the stress redistribution distance. The coupling of the dynamic stress redistribution and the heterogeneity at different scales result in an inverse cascade of damage cluster size, which represents rapid coalescence of damage at the catastrophe transition.

The Droplet Group Micro-Explosions, Viscosity and Atomization Characteristics of W/O Emulsions

The spray of emulsified fuel, composed of diesel fuel, water and methanol can make micro-explosion under high temperature conditions, and the viscosity and the atomization characteristics of emulsion have significant effects on the micro- explosion of emulsions. To clarify the combustion mechanism of water-in-oil emulsion sprays, combustion bomb experiments were carried out, and the droplet group micro- explosions in W/O fuel emulsion sprays in a high-pressure, high-temperature bomb were observed clearly by a multi-pulsed, off-axis, image-plane ruby laser holocamera and continuously by a high-speed CCD camera.The viscosity and atomization characteristics of emulsions were also studied experimentally. The experimental results show that the higher concentration of the aqueous phase (water-methanol) (<50%) increases the viscosity of the emulsions, especially for higher agent concentration, and higher aqueous phase concentration and higher viscosity results in lager Sauter Mean Diameter (SMD). The experiment results also show that the different kinds of emulsifying agents, with different Hydrophile-Lipophile Balance (HLB) values, have significant influence on the viscosity of the emulsions.

低渗油田“层内爆炸”增产技术的小尺度模拟实验研究

本文是关于低渗油田增产技术的室内模拟实验研究的论文。我们对井内爆炸采油、核爆采油和高能气体压裂进行全面调研以后，吸取了井内爆炸采油的教训，借鉴了高能气体压裂的成功经验，提出了低渗油田“层内爆炸”增产技术。该技术是利用水力压裂技术的现有设备，将适当的炸药压入岩石裂缝，再用适当的方法起爆，从而在岩石裂缝周围产生大量裂缝，在不会对储层产生不利影响也不会毁坏井筒的前提下，达到提高采取收率并增产油气的目的。首先，建立了圆管点火实验装置、小尺度模拟实验装置和平板点火实验装置；然后利用实验装置进行了“层内爆炸”用特种火药和特种炸药配方的探索。通过实验我们至少找到了一种“层内爆炸”用药品的配方，并且在小尺度模拟实验装置中实现了“层内爆炸”基本过程的模拟实验，从而证实“层内爆炸”思路正确，原理上可行。接着，建立了爆燃推进的模型，并在恒稳推进和不可压缩简化条件下得到几组算例，这些解在物理上是合理的。通过计算我们得知爆燃恒温推进的条件是苛刻的，需要多个参数的匹配。通过本人硕士论文的工作，证实了低渗油田“层内爆炸”增产技术在原理上的可行性。但因为“层内爆炸”过程中牵涉到多个特征尺度，因此并不能从小尺度向大尺度简单地推广，下一步工作是建立中大尺度模拟实验装置，考察在中大尺度条件下“层内爆炸”的可行性，为现场实际应用作充分的实验准备。

Mechanisms underlying two kinds of surface effects on elastic constants

ABSTRACT Recently, people are confused with two opposite variations of elastic modulus with decreasing size of nano scale sample: elastic modulus either decreases or increases with decreas- ing sample size. In this paper, based on intermolecular potentials and a one dimensional model, we provide a unified understanding of the two opposite size effects. Firstly, we analyzed the mi- crostructural variation near the surface of an fcc nanofilm based on the Lennard-Jones potential. It is found that the atomic lattice near the surface becomes looser in comparison with the bulk, indicating that atoms in the bulk are located at the balance of repulsive forces, resulting in the decrease of the elastic moduli with the decreasing thickness of the film accordingly. In addition, the decrease in moduli should be attributed to both the looser surface layer and smaller coor- dination number of surface atoms. Furthermore, it is found that both looser and tighter lattice near the surface can appear for a general pair potential and the governing mechanism should be attributed to the surplus of the nearest force to all other long range interactions in the pair po- tential. Surprisingly, the surplus can be simply expressed by a sum of the long range interactions and the sum being positive or negative determines the looser or tighter lattice near surface re- spectively. To justify this concept, we examined ZnO in terms of Buckingham potential with long range Coulomb interactions. It is found that compared to its bulk lattice, the ZnO lattice near the surface becomes tighter, indicating the atoms in the bulk located at the balance of attractive forces, owing to the long range Coulomb interaction. Correspondingly, the elastic modulus of one- dimensional ZnO chain increases with decreasing size. Finally, a kind of many-body potential for Cu was examined. In this case, the surface layer becomes tighter than the bulk and the modulus increases with deceasing size, owing to the long range repulsive pair interaction, as well as the cohesive many-body interaction caused by the electron redistribution.

Numerical investigation of crack growth in concrete subjected to compression by the generalized beam lattice model

The beam lattice-type models, such as the Euler-Bernoulli (or Timoshenko) beam lattice and the generalized beam (GB) lattice, have been proved very effective in simulating failure processes in concrete and rock due to its simplicity and easy implementation. However, these existing lattice models only take into account tensile failures, so it may be not applicable to simulation of failure behaviors under compressive states. The main aim in this paper is to incorporate Mohr-Coulomb failure criterion, which is widely used in many kinds of materials, into the GB lattice procedure. The improved GB lattice procedure has the capability of modeling both element failures and contact/separation of cracked elements. The numerical examples show its effectiveness in simulating compressive failures. Furthermore, the influences of lateral confinement, friction angle, stiffness of loading platen, inclusion of aggregates on failure processes are respectively analyzed in detail.

激光聚焦爆炸耦合场的理论建模与跨尺度计算

针对激光聚焦爆炸的电磁-热力耦合效应,在宏观尺度上,把描述激光电磁波散射和传播的Maxwell方程和高温高压气动流场的Euler方程结合起米,利用热力学状态方程(EOS)和电离平衡方程(Saha方程)并通过理论建模和数值仿真,研究和揭示激光聚焦爆炸效应及激光支持吸收波(LSC/LSD)的产生和演化、以及相关的反冲压力和动量耦合等相互作用机制.