青藏高原东部长周期大地电磁测深研究

As a complement to conventional MT, Long-period Magnetotellurics (LMT) has been developed at low frequency for soundings of deep electric structures. Eastern Himalayan Syntaxis (EHS) and surrounding area is a key place for the study of dynamics of the uplift of Tibetan plateau. Experiments in the pioneer studies for EHS3D project showed that the study area shares an unusual low resistive crust and upper mantle. Conventional MT could not provide sufficient information about the deep structures of the study area that requested long period MT measurement to be complemented. This thesis presents the LMT studies in eastern Tibet along the EHS3D-3 Profile from Xiachayu to Yushu including data acquisition, processing, inversion and interpretation. The effective period of the measured LMT signals extend from 10s up to 30000s for the duration more than one week measurement. The resulting model shows that the LMT sounding coincides with the MT data in overlapped periods. Especially the induction arrows and tippers derived from LMT data provide more information about the base of the conductors beneath the plateau with higher resolution. Anomalous induction coefficients and 2-D model suggest extensive conductive bodies beneath Lhasa block and Qiangtang terrain which would be a possible evidence for partial melt and fluids at depth.

中国大中型气田天然气成藏物理化学模拟研究

Natural gas pays more important role in the society as clean fuel. Natural gas exploration has been enhanced in recent years in many countries. It also has prospective future in our country through "85" and "95" national research. Many big size gas fields have been discovered in different formations in different basins such as lower and upper Paleozoic in Erdos basin, Tertiary system in Kuche depression in Tarim basin, Triassic system in east of Sichuan basin. Because gas bearing basins had been experienced multiple tectogenesis. The characteristics of natural gases usually in one gas field are that they have multiple source rocks and are multiple maturities and formed in different ages. There has most difficult to research on the gas-rock correlation and mechanism of gas formation. Develop advanced techniques and methods and apply them to solve above problems is necessary. The research is focused on the critical techniques of geochemistry and physical simulation of gas-rock correlation and gas formation. The lists in the following are conclusions through research and lots of experiments. I 8 advanced techniques have been developed or improved about gas-rock correlation and gas migration, accumulation and formation. A series of geochemistry techniques has been developed about analyzing inclusion enclave. They are analyzing gas and liquid composition and biomarker and on-line individual carbon isotope composition in inclusion enclave. These techniques combing the inclusion homogeneous temperature can be applied to study on gas-rock correlation directly and gas migration, filling and formation ages. Technique of on-line determination individual gas carbon isotope composition in kerogen and bitumen thermal pyrolysis is developed. It is applied to determine the source of natural is kerogen thermal degradation or oil pyrolysis. Method of on-line determination individual gas carbon isotope composition in rock thermal simulation has being improved. Based on the "95"former research, on-line determination individual gas carbon isotope composition in different type of maceral and rocks thermal pyrolys is has been determined. The conclusion is that carbon isotope composition of benzene and toluene in homogenous texture kerogen thermal degradation is almost same at different maturity. By comparison, that in mixture type kerogen thermal pyrolysis jumps from step to step with the changes of maturity. This conclusion is a good proof of gas-rock dynamic correlation. 3. Biomarker of rock can be determined directly through research. It solves the problems such as long period preparing sample, light composition losing and sample contamination etc. It can be applied to research the character of source rock and mechanism of source rock expulsion and the path of hydrocarbon migration etc. 4. The process of hydrocarbon dynamic generation in source rock can be seen at every stage applying locating observation and thermal simulation of ESEM. The mechanism of hydrocarbon generation and expulsion in source rock is discussed according to the experiments. This technique is advanced in the world. 5. A sample injection system whose character is higher vacuum, lower leaks and lower blank has been built up to analyze inert gas. He,Ar,Kr and Xe can be determined continuously on one instrument and one injection. This is advanced in domestic. 7. Quality and quantity analysis of benzene ring compounds and phenolic compounds and determination of organic acid and aqueous gas analysis are applied to research the relationship between compounds in formation water and gas formation. This is another new idea to study the gas-rock correlation and gas formation. 8. Inclusion analysis data can be used to calculate the Paleo-fluid density, Paleo-geothermal gradient and Paleo-geopressure gradient and then to calculate the Paleo-fluid potential. It's also a new method to research the direction of hydrocarbon migration and accumulation. 9. Equipment of natural gas formation simulation is produced during the research to probe how the physical properties of rock affect the gas migration and accumulation and what efficiency of gas migrate and factors of gas formation and the models of different type of migration are. II study is focused on that if the source rocks of lower Paleozoic generated hydrocarbon and what the source rocks of weathered formation gas pool and the mechanism of gas formation are though many advanced techniques application. There are four conclusions. 1.The maturity of Majiagou formation source rocks is higher in south than that in north. There also have parts of the higher maturity in middle and east. Anomalous thermal pays important role in big size field formation in middle of basin. 2. The amount of gas generation in high-over maturity source rocks in lower Paleozoic is lager than that of most absorption of source rocks. Lower Paleozoic source rocks are effective source rocks. Universal bitumen exists in Ordovician source rocks to prove that Ordovician source rocks had generated hydrocarbon. Bitumen has some attribution to the middle gas pool formation. 3. Comprehensive gas-rock correlation says that natural gases of north, west, south of middle gas field of basin mainly come from lower Paleozoic source rocks. The attribution ratio of lower Paleozoic source rocks is 60%-70%. Natural gases of other areas mainly come from upper Paleozoic. The attribution ratio of upper Paleozoic source rocks is 70%. 4. Paleozoic gases migration phase of Erdos basin are also interesting. The relative abundance of gasoline aromatic is quite low especially toluene that of which is divided by that of methyl-cyclohexane is less than 0.2 in upper Paleozoic gas pool. The migration phase of upper Paleozoic gas may be aqueous phase. By comparison, the relative abundance of gasoline aromatic is higher in lower Paleozoic gas. The distribution character of gasoline gas is similar with that in source rock thermal simulation. The migration phase of it may be free phase. IH Comprehensive gas-rock correlation is also processed in Kuche depression Tarim basin. The mechanism of gas formation is probed and the gas formation model has been built up. Four conclusions list below. 1. Gases in Kuche depression come from Triassic-Jurassic coal-measure source rocks. They are high-over maturity. Comparatively, the highest maturity area is Kelasu, next is Dabei area, Yinan area. 2. Kerogen thermal degradation is main reason of the dry gas in Kuche depression. Small part of dry gas comes from oil pyrolysis. VI 3.The K12 natural gas lays out some of hydro-gas character. Oil dissolved in the gas. Hydro-gas is also a factor making the gas drier and carbon isotope composition heavier. 4. The mechanism and genesis of KL2 gas pool list as below. Overpressure has being existed in Triassic-Jurassic source rocks since Keche period. Natural gases were expulsed by episode style from overpressure source rocks. Hetero-face was main migration style of gas, oil and water at that time. The fluids transferred the pressure of source rocks when they migrated and then separated when they got in reservoir. After that, natural gas migrated up and accumulated and formed with the techno-genesis. Tectonic extrusion made the natural gas overpressure continuously. When the pressure was up to the critical pressure, the C6-C7 composition in natural gas changed. The results were that relative abundance of alkane and aromatic decreased while cycloalkane and isoparaffin increased. There was lots of natural gas filling during every tectonic. The main factors of overpressure of natural gas were tectonic extrusion and fluid transferring pressure of source rocks. Well preservation was also important in the KL2 gas pool formation. The reserves of gas can satisfy the need of pipeline where is from west to east. IV A good idea of natural gas migration and accumulation modeling whose apparent character is real core and formation condition is suggested to model the physical process of gas formation. Following is the modeling results. 1. Modeling results prove that the gas accumulation rule under cap layer and gas fraction on migration path. 2. Natural gas migration as free phase is difficult in dense rock. 3. Natural gases accumulated easily in good physical properties reservoirs where are under the plugging layer. Under the condition of that permeability of rock is more than 1 * 10~(-3)μm~(-1), the more better the physical properties and the more bigger pore of rock, the more easier the gas accumulation in there. On the contrary, natural gas canonly migrate further to accumulate in good physical properties of rock. 4. Natural gas migrate up is different from that down. Under the same situation, the amount of gas migration up is lager than that of gas migration down and the distance of migration up is 3 times as that of migration down. 5. After gas leaks from dense confining layer, the ability of its dynamic plug-back decreased apparently. Gas lost from these arils easily. These confining layer can confine again only after geology condition changes. 6. Water-wetted and capillary-blocking rocks can't block water but gases generally. The result is that water can migrate continuously through blocking rocks but the gases stay under the blocking rocks then form in there. The experiments have proved the formation model of deep basin gas.

黄土高原22万年来的黑碳记录和古火灾害历史重建

The term black carbon is used to describe a relatively inert and ubiquitous form of carbon, comprising a range of materials from char and charcoal to element or graphite carbon produced by the incomplete combustion of fossil fuels and biomass. Due to its inertness, the BC in soils, lacustrine and marine sediments and ice can persist over a long period of time. So BC signatures in geological deposits can be used as evidence of natural fires happened in their surroundings. To study the temporal and spatial changes in paleofires over the Chinese Loess Plateau, black carbon concentrations were analyzed on the loess-paleosol samples from three sections including Lijiayuan, Lingtai and Weinan along a north-south transect. Using the orbitally-tuned time-scales of the sections, the black carbon sedimentation rates (BCSR) were calculated. Meanwhile, with objective to document fine resolution fire history during late Pleistocene and Holocene periods, we measured BC concentrations of loess-paleosol samples at dense sampling intervals since 28 ka BP. in Lijiayuan section. The BCSR of the samples were also calculated. In addition, we also conducted observation on black carbon morphologies to examine their sources. Based on the results, the following remarks can be concluded: 1. In the last two glacial cycles, the BCSR values in glacial periods are 2-3 times higher than in interglacial periods, and the BCSR variability has a relatively strong precession-associated 23 kyr period, suggesting that the glacial cold-dry climate conditions were apt to induce natural fires over the Loess Plateau, 2. Comparison of the BCSR records among the three loess sections demonstrates that natural fire occurrence was much more intensive and frequent in the northern and interglacial periods. 3. Pollen records and carbon isotope analyses of organic matter have shown that the Loess Plateau was covered by an Artemisia-dominated grassland vegetation both during glacial and interglacial periods, So grassland fires were the dominant fire types in the Plateau, which is also corroborated by the observation of black carbon morphology. In addition, statistics and comparison of BC particle sizes among the sections demonstrated that BC records probably reflected local fires. 4. According to previous studies about the effect of fires on vegetation changes, we considered that the fires might play an important role in the expansion of grassland during glacial periods, besides the control of climate changes. 5. The high resolution black carbon record in Lijiayuan section has shown that the BCSR series well documented Younger dryas (YD) and Heinrich (HI和H2) events, suggesting that natural fires in the northwestern part of Chinese Loess Plateau could regularly respond to the millennial scale climate oscillation.

运动距离效应的认知编码机制

Among the cognitive studies of action, an important behavioral method is used to observe Reaction Time (RT) and Movement Time (MT) as the functions of motor parameters. RT is measured from the beginning of target presentation to the initiation of a movement, which is regarded as the programming of the ongoing movement. MT is measured from the initiation to the end of the movement, which is regarded as the execution of the movement. However, the relationship between RT and motor parameters remains uncertain till now. Under the uncertainty many related issues cannot be settled for long period, especially the issues as whether the amplitude effect appears during RT, or what should the amplitude effect be during RT. The present study aimed to find out the amplitude effect and the related cognitive process under different experimental conditions. First, we discussed the potential composition of RT and suggested that RT that normally measured in previous experiments might not reflect motor programming very well. Then we designed a series experiments to observe the relationship between RT and motor programming by using different Index of Difficulty (ID), different instructions in which speed and accuracy were emphasized respectively, different vision condition during movement execution and Go/NoGo paradigm. Meanwhile, we compared the amplitude effect under the respective RT to make the specific conclusion about the amplitude effect, and the relationship between RT and MT as well. The main findings are showed as following. 1) Because of the existing of “preview”, “visual feedback control” and “speed-accuracy tradeoff”, RT reflects motor programming differently under different experimental conditions. 2) Under different experimental conditions, the amplitude effect on RT varies. RT could be too short to exhibit the amplitude effect. Or the amplitude effect could be that more RT is needed for shorter movement when RT is prolonged. Or the amplitude effect could be that more RT is needed for longer movement when RT is further prolonged. 3) Under the present experimental conditions, the amplitude effect on MT showed consistently that longer movement needs longer MT. 4) Under the present experimental conditions, the relationship between RT and MT is a kind of compensation. The present study has important theoretic significance. The cognitive process of action is an important part of human cognitive behavior. The related studies could be very helpful for human people to know about themselves and the relation between themselves and the surroundings as well. Keywords motor programming; amplitude effect; Reaction Time (RT); Movement Time (MT)