Nd-Al双金属活性体对异戊二烯的溶液聚合

近年来,对于稀土Ziegler-Natta催化剂活性体的研究比较活跃。使用催化剂活性体可以消除剩余烷基铝等因素对聚合反应的影响,比以前所用的多组分混合物的催化体系更客观地反映出聚合过程。我们在以前工作的基础上,从体系中分离出Nd-Al双金属活性体,并用于引发异戊二烯溶液聚合,探讨不同聚合条件下异戊二烯溶液聚合的规律,以利于对稀土催化聚合反应的深入了解。

STRUCTURE AND PROPERTIES OF SEQUENTIALLY POLYMERIZED PROPYLENE-B-[ETHYLENE-CO-PROPYLENE]-B-PROPYLENE COPOLYMERS

The structure and properties of presumed block copolymers of polypropylene (PP) with ethylene-propylene random copolymers (EPR), i.e., PP-EPR and PP-EPR-PP, have been investigated by viscometry, transmission electron microscopy, dynamic mechanical analysis, differential scanning calorimetry, gel permeation chromatography, wide-angle x-ray diffraction, and other techniques testing various mechanical properties. PP-EPR and PP-EPR-PP were synthesized using delta-TiCl3-Et2AlCl as a catalyst system. The results indicate that the intrinsic viscosity of these polymers increases with each block-building step, whereas the intrinsic viscosity of those prepared by chain transfer reaction (strong chain-transfer reagent hydrogen was introduced between block-building steps during polymerization) hardly changes with the reaction time. Compared with PP / EPR blends, PP-EPR-PP block copolymers have lower PP and polyethylene crystallinity, and lower melting and crystallization temperatures of crystalline EPR. Two relaxation peaks of PP and EPR appear in the dynamic spectra of blends. They merge into a very broad relaxation peak with block sequence products of the same composition, indicating good compatibility between PP and EPR in the presence of block copolymers. Varying the PP and EPR content affects the crystallinity, density, and morphological structure of the products, which in turn affects the tensile strength and elongation at break. Because of their superior mechanical properties, sequential polymerization products containing PP-EPR and PP-EPR-PP block copolymers may have potential as compatibilizing agents for isotactic polypropylene and polyethylene blends or as potential heat-resistant thermoplastic elastomers.

Nd-Al双金属活性体的组成及其对共轭双烯烃的聚合

稀土Ziegler-Natta催化剂活性体对双烯烃配位聚合的研究已有很多报道。作者曾从NdCl_3·3P_(350)~(**)-Al(i-Bu)_3体系分离出Nd-Al双金属活性体。本文从NdCl_3·3P_(350)-HAl(i-Bu)_2和Al(C_2H_5)_3反应体系中分离出一系列Nd-Al双金属活性体,用元素分析方法研究了这些活性体的组成,并综合考察了在无助催化剂AlR_3存在下从不同烷基铝获得的活性体本身对共轭双烯烃的定向聚合能力。 单体、溶剂、HAl(i-Bu)_2、Al(C_2H_5)_5及活性体的合成,聚合方法,聚合物表征均按文献[4]。

NdCl_3·3P350-AlR_3二元催化体系对双烯烃的定向聚合

由氯化稀土的不同种类磷酸酯配合物与三烷基铝组成的Ziegler-Natta催化剂对双烯烃聚合的研究已有报道,其中聚合活性最高的NdCl_3·3P350—AlR_3二元催化体系对丁二烯溶液聚合及异戊二烯本体聚合的详细研究尚未见报道,本文考察了该体系对双烯烃的定向聚合能力,通过二元体系与相应的催化剂活性体聚合规律的对比,提高对稀土催化聚合反应过程的认识。

一种均相稀土催化剂反应过程的初步研究

稀土元素组成的Ziegler-Natta型催化剂,其相态常受体系中Cl/Nd克原子比所制约,仅在Cl/Nd≤2克原子比时呈均相态。最近发现一类新型催化体系,可在较宽Cl/Nd下保持均相态,如以Me_2SiCl_2(二甲基二氯硅烷),烯丙基氯等为第三组份所组成的体系。

SYNTHESIS AND CHARACTERIZATION OF HIGH-PERFORMANCE PA FILM

I. INTRODUCTIONIn last decade, considerable attention was focused on polyacetylene. However, its practical application was affected considerably because of its poor strength and stability. Recently, Narrmann et al. reported that they could synthesize PA film with improved properties using modified Ziegler-Natta catalyst. However, no detailed

多核Nd-Al双金属配合物对丁二烯的聚合——Ⅱ.聚合的一般规律

在从均相稀土Ziegler-Natta催化剂中分离出有双烯聚合活性的Nd-Al双金属配合物的基础上,利用该配合物可在无助催化剂烷基铝存在下单独引发丁二烯聚合的特性,详细研究了活性体、外加烷基铝、单体浓度,温度及时间等变量对聚合的影响;对比了活性体引发聚合与一般Ziegler-Natta催化聚合在一般规律上的异同。以更客观的实验事实论证了烷基铝在聚合过程中的作用,通过聚合产物的GPC测定讨论了活性体聚合中存在的键转移反应,确认外加烷基铝的键转移能力最强。所得结果有助于对稀土催化定向聚合过程的深入了解。

稀土-其它过渡金属混合催化剂用于共轭双烯烃的聚合——Ⅱ烷基铝对丁二烯聚合及产物微观结构的影响

某些过渡金属组成的Ziegler-Natta催化剂聚合共轭双烯烃,所得聚合物的微观结构易随聚合条件和主催化剂配体的改变而异.具有d电子的钴、钛催化体系聚合丁二烯,既可得cis-1,4结构聚丁二烯,又可得1,2结构的聚丁二烯;而具有f电子的稀土催化剂聚合共轭双烯烃,无论怎样改变其聚合条件和配体,一般皆得高顺式聚合物.一般认为:这种定向性的特征是由单体向活性中心上配位、插入时的环境及活性中心的本质所决定的.在第一报中作者利用同一种配位体,使具有d电子的过渡金属Fe和具有f电子的稀土