Harmonic mode-locked ytterbium-doped fibre ring laser

We demonstrate a harmonic mode-locked ytterbium-doped fibre ring laser, which consists of a polarization-sensitive isolator, two polarization controllers, two 976 nm laser diodes as the pump source and a two-segment ytterbium-doped fibre. Utilizing an additive pulse mode-locked technique based on nonlinear polarization evolution, the ytterbium-doped fibre laser can operate in mode-locked state by adjusting the position of polarization controllers. The cavity fundamental repetition rate is 23.78 MHz. We also observe the second- and third-harmonic mode locking in the normal dispersion region, and their repetition rates are 47.66 MHz and 71.56 MHz, respectively. Over-driving of the saturable absorber in the harmonic mode-locking pulse is analysed and discussed in detail.

黄土坡面下坡位土壤侵蚀过程的模拟试验

在中国科学院水利部水土保持研究所,采用2个不同坡长小区室内模拟降雨试验方法,对黄土坡面下坡位侵蚀过程进行研究。结果表明:1)坡面下坡位侵蚀模数随降雨过程、降雨强度及坡度的变化均具有大小交错,上下波动的特征,侵蚀模数随降雨过程的变化总体呈先上升后趋于稳定的态势,随降雨强度的增大而增加,随坡度的增大而先增大后减小,再增大再减小;2)坡面上、下坡位侵蚀模数随降雨过程、坡度及降雨强度的变化均具有明显差异,下坡位明显不如上坡位;3)坡面上坡位汇流和下坡位产流与坡面上坡位输沙对坡面下坡位侵蚀模数的影响可用二元线性方程很好地描述,前者的贡献率为47.8%,后者为20.4%;只通过观测分析小区平均侵蚀特征得出的坡面侵蚀过程,掩盖了坡面下坡位的真实侵蚀过程,采取水土保持措施减少坡面上坡位汇流及增加降雨就地入渗,可以有效地治理坡面下坡位的水土流失。

乔木蒸腾耗水量研究方法述评与展望

参阅了大量国内外有关乔木蒸腾研究方法文献,认为乔木蒸腾量研究方法主要有二大类,即组织器官测定、单木测定;分类对典型研究方法(快速称重法、气孔计法、整株容器称重法、同位素示踪法、热脉冲法、树干热平衡法、热扩散探针法)进行了述评,对比分析了各种方法间的优缺点及其适用范围;展望了乔木蒸腾耗水作用研究方法的应用前景,认为热技术法是未来几年内的主要测定方法。

A transfer matrix approach to conductance in quantum waveguides

A transfer matrix approach is presented for the study of electron conduction in an arbitrarily shaped cavity structure embedded in a quantum wire. Using the boundary conditions for wave functions, the transfer matrix at an interface with a discontinuous potential boundary is obtained for the first time. The total transfer matrix is calculated by multiplication of the transfer matrix for each segment of the structure as well as numerical integration of coupled second-order differential equations. The proposed method is applied to the evaluation of the conductance and the electron probability density in several typical cavity structures. The effect of the geometrical features on the electron transmission is discussed in detail. In the numerical calculations, the method is found to be more efficient than most of the other methods in the literature and the results are found to be in excellent agreement with those obtained by the recursive Green's function method.

Modeling study on the flow, heat transfer and energy conversion characteristics of low-power arc-heated hydrogen/nitrogen thrusters

A modeling study is conducted to investigate the effect of hydrogen content in propellants on the plasma flow, heat transfer and energy conversion characteristics of low-power (kW class) arc-heated hydrogen/nitrogen thrusters (arcjets). 1:0 (pure hydrogen), 3:1 (to simulate decomposed ammonia), 2:1 (to simulate decomposed hydrazine) and 0:1 (pure nitrogen) hydrogen/nitrogen mixtures are chosen as the propellants. Both the gas flow region inside the thruster nozzle and the anode-nozzle wall are included in the computational domain in order to better treat the conjugate heat transfer between the gas flow region and the solid wall region. The axial variations of the enthalpy flux, kinetic energy flux, directed kinetic-energy flux, and momentum flux, all normalized to the mass flow rate of the propellant, are used to investigate the energy conversion process inside the thruster nozzle. The modeling results show that the values of the arc voltage, the gas axial-velocity at the thruster exit, and the specific impulse of the arcjet thruster all increase with increasing hydrogen content in the propellant, but the gas temperature at the nitrogen thruster exit is significantly higher than that for other three propellants. The flow, heat transfer, and energy conversion processes taking place in the thruster nozzle have some common features for all the four propellants. The propellant is heated mainly in the near-cathode and constrictor region, accompanied with a rapid increase of the enthalpy flux, and after achieving its maximum value, the enthalpy flux decreases appreciably due to the conversion of gas internal energy into its kinetic energy in the divergent segment of the thruster nozzle. The kinetic energy flux, directed kinetic energy flux and momentum flux also increase at first due to the arc heating and the thermodynamic expansion, assume their maximum inside the nozzle and then decrease gradually as the propellant flows toward the thruster exit. It is found that a large energy loss (31-52%) occurs in the thruster nozzle due to the heat transfer to the nozzle wall and too long nozzle is not necessary. Modeling results for the NASA 1-kW class arcjet thruster with hydrogen or decomposed hydrazine as the propellant are found to compare favorably with available experimental data.

隆肛蛙属Feirana种群的系统学与动物地理学研究

对隆肛蛙属的物种构成进行了订正，建立新属肛刺蛙属Yerana gen. nov.；订正后的隆肛蛙属现仅隶2种， 即隆肛蛙F. quadrana和太行隆肛蛙F. taihangnicus。运用形态学分析探讨了隆肛蛙属物种及种群的形态差异和分类关系，通过分子系统学研究探讨了隆肛蛙属物种及种群的分类和系统发育关系，运用动物地理学方法结合系统发育关系探讨了隆肛蛙属种群的地理分布格局成因与历史过程。主要结果和推论如下： 1．隆肛蛙属物种构成的订正及一新属建立 建立新属肛刺蛙属，将隆肛蛙属中的原叶氏隆肛蛙F. yei归隶新属肛刺蛙属并更名为叶氏肛刺蛙Y. yei，，新属建立的主要依据为：（1）雄性肛部隆起，肛孔下方有两个布满黑刺的大的白色球形隆起，具单咽下内声囊， 第一指具婚刺；（2）形态量度分析表明叶氏肛刺蛙与隆肛蛙和太行隆肛蛙的形态差异远大于后两者之间的差异；（3）叶氏肛刺蛙的分布区与隆肛蛙和太行隆肛蛙的分布区距离较远且呈隔离状态；（4）分子系统学研究资料（Jiang et al.,2005）证明叶氏肛刺蛙与隆肛蛙和太行隆肛蛙非单系发生；叶氏肛刺蛙在第二支中位于基部。因此，隆肛蛙属现仅隶2种，即隆肛蛙和太行隆肛蛙。 2．隆肛蛙属种群形态学研究 对隆肛蛙属中隆肛蛙和太行隆肛蛙的15个地理种群565只标本的28项形态性状进行了测量，运用典型判别分析法对其分析的结果表明：（1）太行隆肛蛙与隆肛蛙形态差异明显，支持其为不同的物种；（2）原隆肛蛙河南伏牛山种群和山西中条山种群应为太行隆肛蛙的地理种群；（3）隆肛蛙不同地理种群之间形态差异明显，其中四川安县种群、陕西周至种群和湖北利川种群与模式产地重庆巫山种群的差异可能达到了亚种或亚种以上分化水平。对隆肛蛙属量度分析的15个种群进行定性形态分析表明其分为三种形态型，对应隆肛蛙、过渡型和太行隆肛蛙，其变异特征主要为内跗褶、雄性肛部隆起及疣粒分布、第五趾外侧缘膜等，这与量度分析结果相似。 3．隆肛蛙属种群分子系统学研究 测定隆肛蛙属Feirana的2种19种群的线粒体12S rRNA和16S rRNA基因片段、ND2基因的DNA序列，比对后共计1953bps。（1）遗传多样性与距离分析：结果表明，隆肛蛙属种群具很高的遗传多样性，19个种群样品表现出19种单倍型（遗传多样性指数Hd＝1.0）； ND2基因的进化信息含量远高于12SrRNA和16SrRNA。隆肛蛙属2种群组内的种群间的遗传距离远小于两种群组间的距离，种群在不同基因上的遗传距离表现的关系与对应的系统树一致。（2）系统发育关系分析：结果表明，不同基因片断基于不同方法构建的隆肛蛙属种群系统发育树结构基本一致，基本表明隆肛蛙属种群为单系发生；它们在系统树中分为两大支，分别对应于隆肛蛙和太行隆肛蛙；支持中条山种群（沁水、历山和济源种群）和伏牛山种群（栾川和内乡种群）为太行隆肛蛙的地理种群，而原隆肛蛙秦岭中东段的部分种群（柞水、宁陕、长安大坝沟种群）也应为太行隆肛蛙的地理种群。（3）亚种分化分析：根据遗传距离分析和系统发育关系分析结果，并考虑形态上的差异情况以及地理分布信息，隆肛蛙所隶种群组可分为2亚种，即隆肛蛙指名亚种F. quadrana quadrana包括四川盆地东缘大巴山东段-巫山-武陵山北麓种群和秦岭中段（周至板房子和长安广货街）种群，他们在系统关系树上聚为一支；安县亚种F. quadrana anxianensis包括四川盆地西缘岷山东麓-龙门山-大巴山和秦岭西段的种群（安县、青川、文县、南江和凤县种群），他们在系统关系树上聚为一支。太行隆肛蛙所隶种群组也可分为2亚种，即太行隆肛蛙指名亚种F. taihangnicus taihangnicus包括中条山的种群（沁水、历山和济源种群）和中东秦岭的部分种群（柞水、长安大坝沟和宁陕种群），他们在系统关系树上聚为一支；太行隆肛蛙伏牛亚种F. taihangnicus funiuensis，为伏牛山地区的种群（栾川和内乡种群），他们在系统关系树上聚为一支。 4．隆肛蛙属种群动物地理学研究 隆肛蛙属19种群的分歧年代分析： 以长江巫山段和黄河三门峡段的形成历史时期为参考点，根据已测隆肛蛙属19种群及其外群包括N. pleski、P. yunnanesis、P. robertingeri、F. limnocharis的1953bps DNA序列构建分子钟，获得各支系的分歧年代。结果表明：①棘蛙族在70Ma左右开始其独立演化历程，这与Roelants et al.（2004）的分析结果～60±15Ma左右开始分化基本一致，后者印证了本文的分子钟。②隆肛蛙属的起始分化年代较早，隆肛蛙和太行隆肛蛙两种群组的最近祖先种群大概在46Ma～50Ma左右；隆肛蛙和太行隆肛蛙种群组内的种群分化年代相对两种群组间晚得多， 隆肛蛙种群组内两亚种分化起始年代约为10Ma左右，而太行隆肛蛙种群组内两亚种分化起始年代约为6Ma。 隆肛蛙属种群分布格局形成过程分析： ①隆肛蛙属的系统关系与地理分布格局密切相关，大部分系统分支分级与地理距离成正比；②隆肛蛙属最近祖先种群的分化中心可能位于秦岭中部地区， 隆肛蛙属的种群分布格局的形成表现为隔离分化与扩散相结合的机制，由隔离分化产生的隆肛蛙祖先种群主要从秦岭中部向西南方向扩散，后隔离分化为两亚种；太行隆肛蛙祖先种群向东北方向扩散也分化为两亚种。 隆肛蛙属种群分布区域地质历史的探讨：本文所建分子钟和种群分化方式印证了该区域的几次主要地质事件，包括岷山-龙门山-西秦岭等地区的快速差异隆起、第四纪冰期等。 The specific composition of the genus Feirana should be revised. A new genus Yerana gen. nov.（Ranidae：Dicroglossinae）was established based on morphological data-set and molecular phylogeny, as a result, only two species F. quadrana and F. taihangnicus are classified into Feirana now. Morphological differences and taxonomy of populations of Feirana were investigated based on morphological and morphometric data; phylogenetic relationships and taxonomy of populations of Feirana were elucidated using molecular data, and then the proceeding of the distribution pattern of populations of Feirana were discussed. The main results and conclusions and proposals were presented as following: 1. Revising of the specific composition of the genus Feirana and establishment of a new genus The new genus Yerana, only containing the type species Y. yei, was established based on the following evidences: (1) In adult male, distinct up-heaved circular vesicle presents around the anal, and under anal there are two white balls on which black spines exist, black horny spines scatter on the upper side of first finger, and internal single subgular vocal sac presents; (2) there is obvious morphometric differences between Yerana and Feirana; (3) Yerana is distributed far from Feirana; (4) evidences of molecular phylogeny（Jiang et al.,2005）suggested that Yerana take a special phylogenetic clade which is different from other genus included in the tribe Paini. As a result, there are only two species in Feirana, i.e., F. quadrana and F. taihangnicus. 2. Morphological research of populations of Feirana Twenty-eight characters of 565 individuals of 15 populations of the genus Feirana were measured, the results of Canonical Discriminant analysis of the morphometric data-set indicated that: (1) there are very prominent differences between the two species F. quadrana and F. taihangnicus. The validity of species F. taihangnicus was approved here; (2) Mt. Funiu population and Mt. Zhongtiao population should belong to the species F. taihangnicus; (3) Obvious differences exist among 12 populations of F. quadrana, the differentiation among Zhouzhi population, Anxian population, Lichuan population, and Wushan population together with the others probably reach sub-specific or specific level. Result of morphological comparison between 15 different populations show that 3 morphological types are recogenized in according with F. quadrana, F. taihangnicus and intergradation, this result conform to the result of morphometric analysis. 3. Molecular phylogenetic study on populaions of Feirana Fragment of 12SrRNA and 16SrRNA genes, and ND2 gene of 19 populations of two species of Feirana were sequenced and aligned, from which 1953 bps were received. (1) analyses of genetic distance and hereditary diversity indicated that: genetic distance between populations in each group were less than distance between two groups of Feirana, 19 haplotypes were recognized from 19 samples of 19 populations, so the hereditary diversity of populations of Feirana was very high (Hd=1.0), phylogenetic information in ND2 gene is more than fragment sequence of 12SrRNA and 16SrRNA genes. (2) Result of molecular phylogeny indicate that the phylogenetic trees constructed using different methods based on different sequence data sets showed the revised genus Feirana is monophyletic since the 19 populations of Feirana were firstly clustered together as one large clade, which was further clustered into two major clades, corresponding to F. quadrana(GroupⅠ) and F. taihangnicus(GroupⅡ), respectively. So populations of Qinshui and Lishan in Mt. Zhongtiao, populations of Luanchuan and Neixiang in Mt. Funiu, and populations of Zhashui, Dabagou of Chang’an and Ningshan in eastern Mt. Qinling should belong to the species F. taihangnicus; (3) Subspecific differentiation. on the basis of genetic distance, phylogenetic trees and geographical distribution, F. quadrana should have two subspecies, i.e., F. quadrana qudadrana, consisting of the populations Guanghuojie of Chang’an and Zhouzhi in Mid-Mt. Qinling, populations in Wushan area and northern Mt. Wuling (Lichuan), and F. qudadrana anxianensis, consisting of the populations in eastern Mt. Ming shan-Mt. Longmen-western Mt. Daba-western Mt. Qinling (Anxian, Qingchuan, Wenxian, Nanjiang and Fengxian); F. taihangnicus should also has two subspecies, i.e., F. taihangnicus taihangnicus, consisting of the populations in Mt. Zhongtiao and eastern Mt. Qinling, and F. taihangnicus funiuensis, consisting of the populations in Mt. Funiu. 4. Zoogeography of populaions of Feirana Analysis for divergent time of 19 populations of Feirana: Using the dates of run-through of Wushan segment of Changjiang River as the time when the population of Lichuan started differentiated from the populations of Wushan and Shennongjia, and the dates of Sanmenxia segment of Yellow River as the time when the populations in Mt. Zhongtiao started differentiated from the population of Dabagou in Chang’an, molecular clock was established using sequences with 1953 bps of 19 populations of Feirana and outgroup including N. pleski, P. yunnanesis, P. robertingeri, F. limnocharis in order to estimate divergent time of all clades. Result of that indicated that: ① the tribe Paini started to evolve independently at about 70Ma when is in consistent with that estimated by Roelants et al.（2004）with result of about ～60±15Ma, they were corroborated by each other, this confirms the validity of this molecular clock; ② divergent time for speciation of Feriana is early, ancestral populations of F. quadrana and F. taihangnicus were found about 46Ma～50Ma; differentiation of populations within species is greatly late to the divergence of the two species, divergent time for F. quadrana is 10Ma and divergent time for F. taihangnicus is 6Ma. Proceeding of distribution pattern of Feirana. Phylogenetic relationships of populations of Feirana matched quite with distribution pattern of them, the relationships among clades showed in phylogenetic trees is direct ratio to geographical distance of them; the estimated date of speciation between two species of Feirana was as early as speciation of Paa yunnanesis and Nanara pleski; middle part of Mt. Qinling is the center of speciation of Feirana, combination of mult-events of dispersal and vicariance are probably the mechanism of speciation of Feirana, F. quadrana colonized the mid-Mt. Qinling and then differentiated into two subspecies in southwest direction, ancestral population of F. taihangnicus colonized the mid-Mt. Qinling and then differentiated into two subspecies in northeast direction. On geological history of the distribution of Feirana. According to molecular clock and speciation model of populations of Feirana, some geological events are confirmed, including special rise of Mt. Minshan- Mt. Longmen-western Mt. Qinling, glacial age.

中国青藏高原青稞抗穗发芽资源评价与α-淀粉酶基因的克隆及表达

穗发芽（PHS，preharvest sprouting）是影响禾本科作物生产的重要的灾害之一。收获时期如遇潮湿天气容易导致穗发芽发生。发生穗发芽的种子内部水解酶（主要是α-淀粉酶）活性急剧升高，胚乳贮藏物质开始降解，造成作物产量和品质严重降低。因此，选育低穗发芽风险的品种是当前作物育种工作中面临的重要任务。 青稞(Hordeum vulgare ssp. vulgare)主要分布于青藏高原，自古以来就是青藏高原人民的主要粮食。近年来，由于青稞丰富的营养成分和特有的保健品质、在燃料工业中的潜力以及在啤酒酿造工业中的利用前景，在发达国家日趋受到重视，掀起综合研究利用的热潮。我国拥有占全世界2/3 以上的青稞资源，具有发展青稞产业的得天独厚的条件。然而，由于青稞收获期间恰逢青藏高原雨季来临，常有穗发芽灾害发生，使青稞生产损失巨大。目前对青稞穗发芽研究很少，适用于育种的穗发芽抗性材料相对缺乏，不能很好的满足青稞穗发芽抗性育种的需要。本研究以青藏高原青稞为材料，对其穗发芽抗性的评价指标和体系进行构建，同时筛选青稞抗穗发芽品种并对其抗性进行评价，还利用分子生物学手段对青稞穗发芽抗性的分子机理进行了初步探讨。主要研究结果如下： 1. 本试验以来自于我国青藏高原地区的青稞为材料，对休眠性测定的温度范围进行探讨，并对各种穗发芽抗性测定方法的对青稞的适用性进行评测。通过探讨温度对13 个不同基因型的青稞籽粒发芽和休眠性表达的影响，对筛选青稞抗穗发芽资源的温度条件进行探索，并初步分析了其休眠性表达的机理。在10，15，20，25，30℃的黑暗条件下，选用新收获的13 个青稞品种为材料进行籽粒发芽实验，以发芽指数（GI）评价其休眠性。结果发现，不同品种对温度敏感性不同，其中温度不敏感品种，在各温度条件下均表现很低的休眠性；而温度敏感品种，其休眠性表达受低温抑制，受高温诱导。15℃至25℃是进行青稞休眠性鉴定的较适宜的温度范围。通过对供试材料发芽后的α-淀粉酶活性，发现温度对青稞种子的休眠性表达的影响至少在一定程度上表现在对α-淀粉酶活性的调控上。随后，对分别在马尔康和成都进行种植的34 份青稞穗发芽指数（SI），穗发芽率（SR），籽粒发芽指数（GI）和α-淀粉酶活性（AA）进行了测定和分析，发现它们均受基因型×栽培地点的极显著影响，且四个参数之间具有一定相关性。GI 参数由于其变异系数较低，在不同栽培地点稳定性好，且操作简便，是较可靠和理想的穗发芽评价参数。SI 参数可作为辅助，区别籽粒休眠性相似的材料（基因型）或全面评价材料（基因型）的穗发芽抗性特征。AA 参数稳定性较差，并且检测方法复杂，因此不建议在育种及大量材料筛选和评价时使用。此外，青稞穗发芽抗性受环境影响较大，评价时应考虑到尽可能多的抗性影响因素及其在不同栽培条件下的变异。 2. 对来自青藏高原的青稞穗发芽抗性特征及其与其它农艺性状间的关系进行研究。通过测定穗发芽指数（SI）、籽粒发芽指数（GI）和α-淀粉酶活性（AA），表明113 份青稞材料的穗发芽抗性具有显著差异。SI、GI 和AA 参数的变幅分别为1.00~8.86、0.01~0.97 和0.00~2.76，其均值分别为4.72、0.63 和1.22。根据SI 参数，六个基因型，包括‘XQ9-5’，‘XQ33-9’，‘XQ37-5’，‘XQ42-9’，‘XQ45-7’和‘JCL’被鉴定为抗性品种。综合SI、GI 和AA 参数，可以发现青稞的穗发芽抗性机制包含颖壳等穗部结构的抗性和种子自身的抗性（即种子休眠性），且供试材料中未发现较强的胚休眠品种，除‘XQ45-7’外，所有品种在发芽第四天均能检测出α-淀粉酶活性。穗部结构和种子休眠的抗性机制因基因型不同而不同，在穗发芽抗性中可单独作用或共同作用。农家品种和西藏群体分别比栽培品种和四川群体的穗发芽抗性强，而在不同籽粒颜色的青稞中未发现明显差异。相关性检验发现，青稞的穗发芽抗性，主要是种子休眠性，与百粒重、开花期、成熟期、穗长、芒长和剑叶长呈显著负相关关系，与株高相关性不显著。农艺性状可以作为穗发芽抗性材料选育中的辅助指标。本试验为青稞穗发芽抗性育种研究提供了必要的理论基础和可供使用的亲本材料。 3. α-淀粉酶是由多基因家族编码的蛋白质，在植物种子萌发时高度表达，与植物种子的萌发能力密切相关。在大麦种子发芽时，高等电点α-淀粉酶的活性远大于低等电点的α-淀粉酶。为了研究不同穗发芽抗性青稞品种中编码高等电点α-淀粉酶Amy1 基因结构与抗性间的关系，我们以筛选得到的抗性品种‘XQ32-5’（TR1）、‘XQ37-5’（TR2）、‘XQ45-7’（TR3），易感品种‘97-15’（TS1）、‘9657’（TS2）以及强休眠大麦品种‘SAMSON’（SAM）为材料，对其Amy1 基因的编码区序列进行克隆和结构分析，并对它们推导的氨基酸序列进行比较。结果显示，青稞Amy1 基因具有三个外显子、两个内含子，编码区中有13 个核苷酸变异位点，均位于2、3 号外显子，2 个变异位点位于2 号外显子。SAM 和TS1 分别在2 号外显子相应位置有5 个相同的碱基(GAACT)的插入片段。相应α-淀粉酶氨基酸序列推导发现，所有核苷酸变异中有8 个导致相应氨基酸残基的改变，其余位点为同义突变。青稞Amy1 基因编码区序列品种间相似度高达99%以上，部分序列变异可能与其穗发芽抗性有关。随后，我们又通过SYBR Green 荧光定量技术对该基因在不同发芽时间（1d~7d）的相对表达水平进行了差异性检测。结果发现，7 天内不能检测到SAM 的Amy1 基因表达，5 个青稞品种间的Amy1 基因的相对表达量均随着发芽时间延长而上升，但上升方式有所不同。弱抗品种该基因表达更早，转录本增加速率更大，且在4~5 天可达到平台期。发芽7 天中，抗性品种总转录水平明显低于易感品种。本研究结果表明，青稞Amy1 基因的转录水平是与其穗发芽抗性高度相关。 我国青藏高原青稞，尤其是农家品种的穗发芽抗性具有丰富的变异，蕴藏着穗发芽抗性育种的宝贵资源。本研究为青稞穗发芽抗性育种建立了合理抗性评价体系，筛选出可供育种使用的特殊材料，阐明了农艺性状可辅助穗发芽抗性育种，同时还对穗发芽抗性与α-淀粉酶基因的结构和表达关系进行分析，为青稞穗发芽抗性资源筛选奠定了基础。 Preharvest sprouting (PHS) is a serious problem in crop production. It often takes place when encountering damp, cold conditions at harvest time and results in the decrease of grain quality and great loss of yield by triggering the synthesis of endosperm degrading enzymes (mostly the α-amylase). Therefore, PHS is regarded as an important criterion for crop breeding. In order to minimize the risk of PHS, resistant genotypes are highly required. Hulless barley (Hordeum vulgare ssp. vulgare) is the staple food crop in Qinghai-Tibetan Plateau from of old, where is one of the origin and genetic diversity centers of hulless barley. Recently, interest in hulless barley has been sparked throughout the world due to the demonstrations of its great potential in health food industry and fuel alcohol production. Indeed, hulless barley can also be utilized to produce good quality malt if the appropriate malting conditions are used. In China, overcast and rainy conditions often occur at maturity of hulless barley and cause an adverse on its production and application. PHS resistant genotypes, therefore, are highly required for the hulless barley breeding programs. However, few investigations have been made so far on this issue. The objectives of this study were: 1) to assessment of methods used in testing preharvest sprouting resistance in hulless barley; 2) to evaluate the variability and characteristics of PHS resistance of hulless barley from Qinghai-Tibet Plateau in China; 3) to select potential parents for PHS resistance breeding; 4) to primarily study on the molecular mechanism of PHS resistance of hulless barley. Our results are as followed: 1. We investigated the temperature effects on seed germination and seed dormancy expression of hulless barley, discussed appropriate temperature range for screening of PHS resistant varieties, and analyzed the mechanism of seed dormancy expression of hulless barley. The dormancy level of 13 hulless barley were evaluated by GI (germination index) values calculating by seed germination tests at temperature of 10，15，20，25，30℃ in darkness. There were great differences in temperature sensitivity among these accessions. The insensitive accessions showed low dormancy at any temperature while the dormancy expression of sensitive accessions could be restrained by low temperature and induced by high temperature. The temperature range of 15℃ to 25℃ was workable for estimating of dormancy level of hulless barley according to our data. Analysis of α-amylase activity showed that the temperature effects on seed germination and the expression of seed dormancy be achieved probable via regulating of α-amylase activity. Furthermore, we evaluated the differences in sprouting index (SI), sprouting rate (SR), germination index (GI) and α-amylase activity (AA) between Maerkang and Chengdu among 34 accessions of hulless barley from Qinghai-Tibetan Plateau in China. These PHS sprouting parameters were significantly affected by accession×location, and they had correlation between each other. GI was the most reliable parameter because of its low CV value, good repeatability and simple operation. SI could assist in differentiating between accessions of similar dormancy or overall evaluation of the resistance. AA was bad in repeatability and had relatively complex testing method, therefore, not appropriate for breeding and evaluation and screening of PHS resistant materials. Besides, since PHS resistance of hulless barley was greatly influenced by its growth environment, possibly much influencing factors and variations between cultivated conditions should be considered. 2. In this study, large variation was found among 113 genotypes of hulless barley (Hordeum vulgare ssp.vulgare) from Qinghai-Tibetan Plateau in China, based on the sprouting index (SI), germination index (GI) and α-amylase activity (AA) which derived from sprouting test of intact spikes, germination test of threshed seeds and determination of α-amylase activity, respectively. The range of SI, GI and AA was 1.00~8.86, 0.01~0.97 and 0.00~2.76，the mean was 4.72, 0.63 and 1.22 espectively. Six resistant genotypes, including ‘XQ9-5’, ‘XQ33-9’, ‘XQ37-5’, ‘XQ42-9’, ‘XQ45-7’ and ‘JCL’, were identified based on SI. Integrating the three parameters, it was clear that both hulls and seeds involved in PHS resistance in intact spikes of hulless barley and there was no long-existent embryo dormancy found among the test genotypes. All the genotypes, except ‘XQ45-7’, had detectable α-amylase activity on the 4th day after germination. There was PHS resistance imposed by the hull and seed per se and the two factors can act together or independent of each other. Besides, landraces or Tibet hulless barley had a wider variation and relatively more PHS resistance when compared with cultivars or Sichuan hulless barley. No significant difference was found among hulless barley of different seed colors. The correlation analysis showed PHS resistance was negatively related to hundred grain weight, days to flowering, days to maturity, spike length, awn length and flag length but not related to plant height. This study provides essential information and several donor parents for breeding of resistance to PHS. 3. Alpha-amylase isozymes are encoded by a family of multigenes. They highly express in germinating seeds and is closely related to seed germination ability. In barley germinating seeds, the activity of high pI α-amylase is much higher than low pI α-amylase. The aim of this study was to determine the relationship between preharvest sprouting resistance of hulless barley and the gene structure of Amy1 gene which encodes high pI α-amylase. The coding region and cDNA of Amy1 gene of three resistant accessions, including ‘XQ32-5’ (TR1), ‘XQ37-5’ (TR2), ‘XQ45-7’ (TR3), two susceptible accessions ‘97-15’ (TS1), ‘9657’ (TS2) and one highly dormant barley accession ‘SAMSON’ (SAM) was cloned. Analysis of their DNA sequences revealed there were three exons and two introns in Amy1 gene. Thirteen variable sites were in exon2 and exon3, 2 variable sites were in intron2. SAM and TS1 had a GAACT insert segment in the same site in intron2. Only 8 variable sites caused the change of amino acid residues. There were 99% of similarity between the tested hulless barley and some of the variable sites might be related with preharvest sprouting resistance. Then, we investigated the expression level of Amy1 gene in the 7-day germination test. Results of quantitative real-time PCR indicated that the relative expression trends of Amy1 gene were the same but had significant differences in the increase fashion between hulless barleys and no detectable expression was found in SAM. Susceptible accessions had earlier expression and faster increase and reached the maximum on day 4 ~ day 5. Besides, total transcripts level was found lower in resistant accessions than susceptible accessions. This study indicated that α-amylase activity was highly related to the transcription level of Amy1 gene which not correlated to missense mutation sites. In conclusion, hulless barley, especially the landraces from Qinghai-Tibetan Plateau in China possesses high degree of variation in PHS performance, which indicates the potential of Tibetan hulless barley as a good source for breeding of resistance to PHS. This study provides several donor parents for breeding of resistance to PHS. Our results also demonstrate that agronomic traits may be used as assistants for PHS resistance selection in hulless barley. Besides, analysis of high pI α-amylase coding gene Amy1 revealed the relative high expression of was Amy1 one of the mainly reason of different PHS resistance level in hulless barley.

Study on the localization of the electric dipole sources

The research of dipole source localization has great significance in both clinical research and applications. For example, the EEG recording from the scalp is widely used for the localization of sources of electrical activity in the brain. This paper presents a closed formula that describes the electric field of dipoles at arbitrary position, which is a linear transformer called the transfer matrix. The expression of transfer matrix and its many useful characteristics are given, which can be used for the analysis of the electrical fields of dipoles. This paper also presents the closed formula for determining the location and magnitude of single dipole or multi-dipoles according to its electrical field distribution. A calculation result for a single dipole shows that the dipole will be located at the midpoint of a line segment if there are equivalent fields at its two ends.

Asymmetric heat conduction in nonlinear lattices

In this Letter, we conduct an extensive study of the two-segment Frenkel-Kontorova model. We show that the rectification effect of the heat flux reported in recent literature is possible only in the weak interfacial coupling limit. The rectification effect will be reversed when the properties of the interface and the system size change. These two types of asymmetric heat conduction are governed by different mechanisms though both are induced by nonlinearity. An intuitive physical picture is proposed to interpret the reversal of the rectification effect. Since asymmetric heat conduction depends critically on the properties of the interface and the system size, it is probably not an easy task to fabricate a thermal rectifier or thermal diode in practice.

Segmented All-Platinum Nanowires with Controlled Morphology through Manipulation of the Local Electrolyte Distribution in Fluidic Nanochannels during Electrodeposition

Synthesis of segmented all-Pt nanowires is achieved by a template-assisted method. The combination of a suitably chosen electrolyte/template system with pulse-reverse electrodeposition allows the formation of well-defined segments linked to nanowires. Manipulation of the morphology is obtained by controlling the electrokinetie effects on the local electrolyte distribution inside the nanochannels during the nanowire growth process, allowing a deviation from the continuously cylindrical geometry given by the nanoporous template. The length of the segments can be adjusted as a function of the cathodic pulse duration. Applying constant pulses leads to segments with homogeneous shape and dimensions along most of the total wire length. X-ray diffraction demonstrates that the preferred crystallite orientation of the polycrystalline wires varies with the average segment length. The results are explained considering transitions in texture formation with increasing thickness of the electrodeposit. A mechanism of segment formation is proposed based on structural characterizations. Nanowires with controlled segmented morphology are of great technological importance, because of the possibility to precisely control their substructure as a means of tuning their electrical, thermal, and optical properties. The concept we present in this work for electrodeposited platinum and track-etched polycarbonate membranes can be applied to other selected materials as well as templates and constitutes a general method to controlled nanostructuring and synthesis of shape controlled nanostructures.

双奇核188Au的高自旋态能级结构研究

作为核物理的前沿领域之一，高自旋态的研究能够提供核结构、核形变、核子耦合等非常有价值的信息。本论文内容为研究188Au 高自旋态的结构特性。　　利用能量为86 和90MeV的19F束流，通过重离子熔合蒸发反应173Yb(19F,4nγ)研究了双奇核188Au 的高自旋态能级结构。利用GEMINI 探测器阵列进行了γ射线的激发函数、X-γ和γ-γ-t 符合测量，共获取了约160×106 个符合事件。基于实验测量结果，对原有的双奇核188Au 能级纲图做了较大的修改。新发现了两个转动带，分别对应建立在π1/2[541]⊗ν1/2[510] 和π1/2[541]⊗νi13/2 组态上的双退耦带和半退耦带。对前人所建立的正宇称带能级进行了修改，发现了一条新的20+态能级，并且指定其为πh11/2⊗2νi13/2h9/2的四准粒子结构。考查与费米面临近的单粒子轨道γ形变驱动效应，188Au 晕态带的γ∼70°非轴对称的形变可能是由h11/2− 奇质子驱动的。π1/2[541]⊗νi13/2 带观察到在低自旋发生旋称反转现象，对这个组态带的A∼180 区旋称反转系统性分析表明，反转点的转动惯量c Θ 函数不随NpNn而变，这与其它几个区有明显的不同。 另外，本论文还介绍了利用16 路Segment 型Clover 探测器的γ射线线性极化测量方法。并且利用60Co 源的两条级联γ射线对其灵敏度进行测试，发现能有效地测量γ射线的电磁属性，从而确定能级的宇称

DNA-Templated Gold Nanoparticles Formation

The interaction between HAuCl4 and DNA has enabled creation of DNA-templated gold nanoparticles without formation of large nanoparticles. It was found that spheral DNA-HAuCl4 hybrid of 8.7 nm in diameter, flower-like DNA-HAuCl4 hybrid, nanoparticles chains and nanoparticles network of DNA-HAuCl4 hybrid could be obtained by varying the reaction conditions, including DNA concentration and reaction temperature. The intermediate product was investigated by shortening the reaction time of DNA and HAuCl4, and the obtained nanoparticles preserved a small DNA segment, which indicated that the reaction between DNA and HAuCl4 had a process.