稀土配合物掺杂的中孔杂化发光材料的制备及其表征

稀土配合物由于具有优良的窄带发光性能和较长的荧光寿命，因而在光电学领域比如激光材料或者荧光标记上引起了广泛的兴趣和应用。吸附在固体表面的稀土配合物的发光性质得到了广泛的研究。MCM-48中孔材料是M41S家族中的一种，具有直径20-30A三维结构的中孔孔道，比MCM-41的一维结构孔道更有优势，比如它可以最大可能的避免客体分子的堆积现象。因此本论文中我们研究了将稀土（Eu3+）β-二酮（DBM＝dibenzoylmethane）配合物掺杂到纯硅MCM-48以及三种有机基团嫁接的有机－无机杂化MCM-48的孔道中去，得到了各种不同的杂化中孔发光材料。首先烧结后的MCM-48被装载稀土Eu（OBM）3'2H2O配合物之后。XRD结果说明稀土配合物被组装到了MCM-48中，其有序结构因为稀土配合物的进入而受到一定的影响，但是样品仍保持了MCM-48的立方相结构。分别通过吸收光谱和热失重的方法计算了掺杂后的发光MCM-48样品进行洗涤后留在MCM一48中配合物的量。固体漫反射光谱在紫外区有一个OBM配体的Sn基态能级（π）到S1激发态能级份＊）的电子跃迁形成的吸收宽带。可见区还观察到E护”离子的4f-4畴征吸收线。与稀土配合物中的OBM配体相比，掺杂MCM-48样品的Sn-S1吸收带均发生蓝移，反映了S1能级向高能方向移动。然后采用了室温两步合成法合成MCM-48，模板剂的去除采用了溶剂萃取法。最佳掺杂浓度为6.98×10-3 mol/l；同时最佳掺杂时间为24小时。在同样的掺杂条件下，稀土配合物在基质中的掺杂量MCM-48＞MCM-41＞＞SiO2。萃取之后的MCM-48在外形上近乎于球形，粒子的直径在0.7-1.2μm之间。粒子显现出多孔的海绵状表面形态，并且具有晶体结构外形，呈菱形十二面体被削去顶端立方体的结构。而且在粒子的表面观察到了类似螺旋结构的孔道，我们认为这是MCM一48所特有的双螺旋型三维孔道结构，这是到目前为止首次报道利用扫描电镜观察到中孔分子筛的孔道结构。荧光光谱结果观察到了激发峰的最大值由于纳米粒子效应出现的蓝移现象。不同基质中的发射系数QZ和04比较可知配合物在三种基质SiO2、MCM-41和MCM-48中环境的极性相差不大。掺杂到中孔MCM-48材料中的稀土配合物的热稳定性比在MCM-41中强，这是由于MCM-48的三维孔道对配合物的保护作用。室温条件下合成的MCM-48分子筛利用后合成嫁接的方法[post-synthesis grajng（PSG）]进行表面修饰，修饰剂选用了带有功能性乙烯基的VTES，链长最短的MTES以及带有氨基的长链NTSED。稀土Eu（DBM）3'2H2O配合物被组装到杂化中孔分子筛材料中。红外光谱与2951核磁共振光谱表明MCM-48的表面被成功的接枝上了有机M下任S，盯任s，N丁s任D基团。与MCM-48相比，MCM-48-R的表面积、孔体积和孔径的减少有以下NTSED＞VTES＞MTES的顺序。这也许是修饰的有机基团不同的链的长度不同的原因。稀土配合物在这三种有机一无机杂化基质环境的极性比纯硅MCM-48要增大。同时配合物在三种基质的中的QZ的值及发光效率的顺序为：MCM-48-MTES＜MCM-48-VTES＜MCM-48-NTSED，说明MCM-48经过三种有机硅氧烷修饰之后孔道极性也遵循同样的顺序，可以认为这是由于三种有机基团的链长的不同造成的，链长越长则修饰之后孔道极性增大的就越多。最后通过溶胶一凝胶过程利用提拉法（Dip-coating method）制备了具有中孔结构的SiO2-CTAB-Tb（acac）3透明发光薄膜（Mesostructed Iuminescence thin film，略为MLTF），稀土配合物利用原位合成（In-situ）的办法掺入到透明薄膜中。对薄膜进行热处理过程表明薄膜中的稀土配合物在50℃的时候开始形成。XRO结果表明稀土离子及有机配体的掺入对薄膜中孔相的结构没有太大的影响，荧光薄膜仍保持层状结构。红外光谱结果说明制备的中孔薄膜是由CTAB和硅氧烷聚合物组成的复合薄膜。荧光薄膜的发射光谱给出了Th3+离子的特征发射峰，荧光薄膜中有机配体与丁b离子之间发生了能量传递现象。因为在热处理过程中有机配体逐渐代替了开始与Tb离子配位的OH基团，使得二者间的能量传递更加有效，从而导致了荧光的增强。

纳米／微米结构氧化物材料的水热合成、形貌与发光性质研究

采用水热法结合后续热处理制备了一系列纯的和稀土离子（Eu3＋，Dy3＋）掺杂的黔具有纳米／微米结构的无机氧化物材料，包括YB03、姚03、Ga203和硅基MCM一攀41介孔分子筛体系。研究了这些体系的水热产物的晶体形貌、结构以及它们的生乖～一＿长机理，并通过进一步热处理得到了保持水热产物纳米／微米结构形貌的发光材料，报道了以上各个体系材料的光致发光性能。一把姚03和Eu203粉末直接加入H3Bo3水溶液中，调节pH一1一4，在180一270夸＿少℃水热处理得到了具有vaterite结构的YBo3：Eu3＋晶体。xRD和FEsEM结果证明一扭03：E矿"晶体是由厚度小于50nm的纳米晶片构成的花状和猴头菇状的微米级晶丫体。水热温度提高时纳米晶片的厚度没有增加，形貌也不变，但是结晶度和发光一强度有所提高。pH值对纳米晶片之间的距离、角度和晶片数量有影响。pH低时，纳米晶片更多且包裹得更紧，形成了猴头菇状；而pH高时，晶片分得更开一些呈花朵状。这与pH值低时结晶成核较快较多有关。YB03：E矿＋水热和固相法样品在24Onm激发下的发光谱峰位相同。但水热样品比固相法样品具有较高的红橙比［Eu3＋：I（，D。一7F2）／I（SD。一7FI）］，增加了12一37％。在24oC下制备的花03：Eu3＋水热样品具有最大的结晶度和发光强度。报道了三种晶形调节剂对水热晶体形貌的影响结果。硝酸钻水溶液用氨水调节至pH一8一n，200oC下水热处理24小时，产物经xRD确定是单斜晶系的碱式硝酸盐叽O（0H）9困03）。FEsEM观察发现产物是一种具有几＿三叶形截面的棱柱。改变合成条件可以调节三叶形棱柱的尺寸。增加氨水量时，PH从8调到n后，棱柱直径可从微米级调节到亚微米级，即从3一5林m左右下降到200一300纳米，同时长径比也有所增加，从pH一8的5增加到pH＝n的10。调节机制可解释为较高的pH条件下结晶成核作用进行较快，形成了更多的晶核。三叶形棱柱的生长机理是、O（OH）9困03）的晶核依靠内在的趋势长成棒状纳米粒子；并通过一种直接的聚集生长，这些起始的纳米棒沿着它们横截面的径向方向快速自堆积成一种Y型结构的棒束；然后沿着棱柱轴向和平行于棱柱叶片方向的晶面同时优先生长，而垂直于叶片方向上的晶面生长得相对缓慢，导致三叶形棱I、－纳米／微米结构氧化物材料的水热合成、形貌与发光性质研究柱的形成。、经过高温相转变得到了姚03三叶形棱柱。采用同样方法可以制得姚03：E矿＋的三叶形棱柱发光粉，其光谱与固相法样品的一致。将Gacl3一HZO一NaOH体系在pH＝6一8时于180℃下水热处理得到了正交晶系的Gao0H晶体，其形貌分别是宽度在200一30Onm之间长径比约1：7的四方棱柱（pH＝6）和长径比约1：3纺锤状的纳米棒束（pH＝8）。使用HZO／DEG混合溶剂可以增加棱柱的长径比，1：Ivol时增加到1：15；1：Zvol时获得的是长达几十微米的四方棱柱纳米线6Go0OH纳米棒是从最初的胶状沉淀中成核后沿着c轴优先生长而成的。pH值的高低可导致Ga0OH晶体从四方棱柱到纳米棒束的不同形貌。DEG的存在对晶体的生长可能有两点作用：一是抑制晶核形成；二是降低晶体沿着横截面晶面的生长速度。经过高温锻烧的产物是保持着前驱体形貌的p一GaZO3晶体。254nm激发下p一GaZO3纳米棒的发射谱是从300nm到600nln的宽峰，最大值在455nln。发光的平均寿命是64ns。其蓝光发射起源于氧空位给体提供的电子和来自受体嫁空位或者嫁氧空位对的空穴之间的复合。采用相似方法制备了p一GaZO3：Dy纳米棒束，并与固相法样品对比了光谱性质的异同。将三种5102基材料：MCM一41型分子筛（直接分子筛CMS和萃取分子筛EMS）、无规颗粒（ASP）和干凝胶（SG）进行从室温到1000℃的不同温度不同时间热处理。254nm激发下，MCM一41没有发光现象。而ASP和SG系列样品随着热处理温度不同而显示不同的PL。说明ASP和SG与MCM一41有着不同的发光机理。排除了ASP和SG样品的发光中心是来自5102网络本身的结构缺陷，认为是其中所含有机物在热处理中产生的碳杂质引起。结果也表明MCM41中模板剂在热处理的碳化产物并没有引起MCM一41的PL。在365nm激发下，MCM一41与ASP、SG的PL现象大致相同。表明所有系列的样品的发光机理相同。CMS和EMS两个系列在300℃以上处理的样品的PL相似，说明模板剂的存在及其碳化并没有影响MCM一41的PL。所有系列样品在365nm激发下的PL认为是起源于5102网络中与氧相关的结构缺陷三Si一0．，而不是碳掺杂作用引起的。

ZnO基稀磁半导体的制备与性质研究

本论文利用溶胶一凝胶法和水热法制备了不同离子（Eu~3＋，Sm~3＋，Mn~2＋，Fe~3＋，Co~2＋，Ni~2＋）作为磁性杂质的ZnO基稀磁半导体，并系统地研究了材料的薄膜、粉末和纳米结构的结晶特性、结构形态和光、电、磁性质。溶胶一凝胶法制备的薄膜的晶体为c轴取向生长的六方纤维锌矿结构。薄膜的取向生长受烧结气氛、烧结温度和掺杂离子浓度的影响，其中烧结气氛是影响薄膜取向生长的最直接、最显著因素。随着烧结气氛中氧含量的减小，薄膜的沿c轴生长的趋势加强。此外，烧结温度的提高也增强薄膜沿c轴生长的趋势，但掺杂离子浓度的增加却抑制薄膜的c轴取向生长特性。通过薄膜表面形态的研究发现，在空气中烧结的薄膜由立方晶粒构成，而在真空中烧结的样品则由不规则的片状晶粒组成。组成薄膜的多晶颗粒粒径小于10Onm，15层薄膜的膜厚为357-366nm。掺杂离子在薄膜中均匀分布，成膜过程不改变掺杂离子（Eu3+，Sm3＋，Mn2+，Fe3＋，Co2＋，Ni2＋）和基质离子（Zn2+和O2-）的价态。 不同Eu3+掺杂浓度的ZnO薄膜样品的吸收光谱的吸收边出现在363nm和368nm之间，对应半导体材料的禁带宽度Eg=3.42～3.40ev。由于Eu3＋改变了薄膜的表面性质，Zn1-xEux（0.005≤x≤0.15）薄膜在可见光区出现了一系列干涉带。Zn1-xTMxO薄膜的吸收光谱的吸收边位置出现在356nm-369nm，对应半导体的禁带宽度为3.34-3.46eV，在可见光区发现了Co2＋的电子的d-d跃迁引起的吸收带。随着掺杂浓度的增加，薄膜的透光率逐渐减小。Zn1-xCoxO薄膜在近紫外与可见光区的透光率都在60％以上，Zn1-xEuxO薄膜的透光率则高达90％。在Zn1-xEuxO薄膜的激发发射光谱中，以613nm作为监控波长，激发光谱除了检测到Eu3＋的7F→5D能级的吸收跃迁外，还检测到最大值位于378nm附近的ZnO的吸收带。以394nm为激发波长，发射光谱检测到Eu3+的5D0→7FJ（J＝1，2，3，4）跃迁。以zno的带隙能量378nm作为激发波长进行激发，检测到Eu3+的5D0→7F2跃迁，说明基质zno和E矿十之间存在能量交换。薄膜磁性测试在4-400K温度范围内进行，发现在此温度范围内Zn0.9Eu0.1O薄膜表现居里一外斯顺磁性；在低温区，存在磁性增强现象。zno．gCoo．IO薄膜在23oK以下表现为铁磁性，200K的M-H曲线显示薄膜的剩磁（Br）约为0．21em侧g，矫顽力（Hc）约为327Oe。但Zn0.9Mn0.1O，Zn0.9Ni0.1O，Zn0.9Co0.1O薄膜的磁性测试则显示在80K以上三种薄膜均表现为顺磁性。Zn0.9Eu0.1O薄膜的电阻呈现典型的半导体性质，在ZT的磁场下，薄膜在110K获得最大14.53％的磁阻率。Zn1-xTMxO薄膜的电阻也表现典型的半导体特性，实验研究了薄膜在不同掺杂离子浓度、外加磁场以及温度条件下的磁阻性质。粉末样品中磁性离子的掺杂浓度均小于薄膜样品。Co，Fe，Ni，Mn掺杂的Zn1-xTMxO粉末在80以上均为顺磁性。在Co2＋掺杂的粉末样品中没有发现类似于薄膜样品的铁磁性，说明DMS的磁性与制备条件关系密切。实验证明了利用sol-gel方法，Zno：TM稀磁半导体能够有效地组装在MCM-41和AAO的孔道内。ZnO:TM材料组装进在MCM-41孔道后，不改变孔道的六方结构但使孔径变小。随着组装次数的增加，MCM-41的孔径和孔容累进减小。组装在AAo模板孔道内的材料呈单分散纳米颗粒状态，颗粒粒径小于loonm。组装材料的磁性测试显示：组装在MCM-41内的Zn0.9Co0.1O材料在80K-30OK呈现超顺磁性。而Mn，Fe，Ni掺杂的Zno在此温度范围内表现顺磁性。组装在AAO内的ZnO:TM(TM=Mn，Fe，Co，Ni）材料在SOK-30OK温度范围内都呈现顺磁性。在水热法合成ZnO:A（A＝Bu，Sm，co）纳米粒子的过程中，发现反应温度、压力、时间和溶液浓度等因素只影响Znl．xCoxO纳米粒子的的产量，而溶液的酸度却影响产物的形貌。控制溶液的酸度，可以控制产物的形貌从粒状向棒状转变。当溶液的PH＝5时，在甲醇：水体系中可以水热合成规则的棒状ZnO：RE（RE=Eu，Sm）纳米晶。所得到的Zn0.98Co0.02O纳米晶在80K呈超顺磁行为，而ZnO：RE（RE＝Eu，Sm）纳米晶在80K则表现较弱的顺磁性。 实验通过控制水热条件，制备了一种新型结构的柠檬酸锌晶体。由于利用了水热反应的非平衡合成条件，所得到的晶体的层状结构不同于目前已知的所有柠檬酸配合物的离散型分子结构。单晶衍射结果表明：化合物是一个由八面体和一个非对称单元交替相连构成的二维层状结构。

Effect of support on chromium based catalysts for the oxidative dehydrogenation of C2H6 with CO2 to C2H4

The oxidative dehydrogenation of ethane (ODE) with CO2 to C2H4 has been studied over a series of Cr-based catalysts using SiO2, Al2O3, (MCM-41 zeolite) MCM-41, MgO and Silicate-2 (Si-2) as the supports. TPR, NH3-TPD, and EPR characterizations of catalysts were carried out to investigate the reduction property of Cr species on different supports, the acidities of catalysts and Cr species of 6Cr/SiO2 catalysts, respectively.

Identifying the isolated transition metal ions/oxides in molecular sieves and on oxide supports by UV resonance Raman spectroscopy

Isolated transition metal ions/oxides in molecular sieves and on surfaces are a class of active sites for selective oxidation of hydrocarbons. Identifying the active sites and their coordination structure is vital to understanding their essential role played in catalysis and designing and synthesizing more active and selective catalysts. The isolated transition metal ions in the framework of molecular sieves (e.g., TS-1, Fe-ZSM-5, and V-MCM-41) or on the surface of oxides (e.g., MoO3/Al2O3 and TiO2/SiO2) were successfully identified by UV resonance Raman spectroscopy. The charge transfer transitions between the transition metal ions and the oxygen anions are excited by a UV laser and consequently the UV resonance Raman effect greatly enhances the Raman signals of the isolated transition metal ions. The local coordination of these ions in the rigid framework of molecular sieves or in the relatively flexible structure on the surface can also be differentiated by the shifts of the resonance Raman bands. The relative concentration of the isolated transition metal ion/oxides could be estimated by the intensity ratio of Raman bands. This study demonstrates that the UV resonance Raman spectroscopy is a general technique that can be widely applied to the in-situ characterization of catalyst synthesis and catalytic reactions. (C) 2003 Elsevier Science (USA). All rights reserved.

Design and synthesis of near-IR luminescent mesoporous materials covalently linked with tris(8-hydroxyquinolinate) lanthanide(III) complexes

By using the bifunctional ligand, 8-hydroxyquinoline-functionalized organosilane (Q-Si), the new mesoporous material Q-MCM-41 covalently bonded with 8-hydroxyquinoline was synthesized. Through the ligand exchange reaction, the new near-infrared (NIR) luminescent mesoporous LnQ(3)-MCM-41 (Ln = Er, Nd, Yb) materials were prepared by linking the lanthanide quinolinate complexes to the ordered mesoporous Q-MCM-41 material. The LnQ(3)-MCM-41 materials were characterized by powder X-ray diffraction and N-2 adsorption/desorption, and they all show the characteristic mesoporous structure of MCM-41 with highly uniform pore size distributions.

Synthesis, characterization and catalytic properties of chiral BINOL functionalized mesoporous silicas for enantioselective Morita-Baylis-Hillman reaction

Several Chiral BINOL functionalized mesoporous silicas were prepared by post grafting of organosilane derivatives of (S)-BINOL (1,1'-bi-2-naphthol) on SBA-15 and characterized by C-13 CP/MAS NMR, FT-IR, UV-visible absorption spectra, elemental analysis, powder XRD, nitrogen adsorption-desorption isotherms and TEM techniques. Their catalytic properties were demonstrated in enantioselective Morita-Baylis-Hillman reaction of 3-phenylpropanal and cyclohexenone.

Luminescence functionalization of mesoporous silica with different morphologies and applications as drug delivery systems

Ordered mesoporous silica (MCM-41) particles with different morphologies were synthesized through a simple hydrothermal process. Then these silica particles were functionalized with luminescent YVO4:EU3+ layers via the Pechini sol-gel process. The obtained YVO4:Eu3+ and MCM-41 composites, which maintained the mesoporous structure of MCM-41 and the red luminescence property of YVO4:Eu3+ were investigated as drug delivery systems using ibuprofen (IBU) as model drug. The physicochemical properties of the samples were characterized by X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N-2 adsorption, and photoluminescence (PL) spectra, respectively.

Synthesis and Characterization of Urea Bridged Hybrid Periodic Mesoporous Organosilica Materials

Urea bridged organic-inorganic hybrid mesoporous SiO2 materials (U-BSQMs) were synthesized through a sol-gel procedure by co-condensation of bis(triethoxysilyl propyl) urea (BSPU) under basic conditions using cetyltrimethylammonium bromide (CTAB) as organic template. X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed the mesoporous structure of the sample. Fourier-transform infrared spectroscopy (FT-IR), solid state CP-MAS NMR spectroscopy of Si-29 (Si-29, CP-MAS NMR) and C-13 (C-13 CP NMR) indicated that most of the Si-C bonds are unbroken during the synthesis process.

Magnetic Mesoporous Silica Spheres for Drug Targeting and Controlled Release

Magnetically functionalized mesoporous silica spheres with different size (average diameter, A.D.) from 150 nm to 2 mu m and pore size distribution were synthesized by generating magnetic FexOy nanoparticles onto the mesoporous silica hosts using the sol-gel method. The X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), N-2 adsorption/desorption results show that these composites conserved regular sphere morphology and ordered mesoporous structure after the formation of FexOy nanoparticles. XRD and X-ray photoelectron spectroscopy (XPS) analysis confirmed that the FexOy generated in these mesoporous silica hosts is mainly composed of gamma-Fe2O3. Magnetic measurements reveal that these composites with different gamma-Fe2O3 loading amounts possess super-paramagnetic properties at 300 K, and the saturation magnetization increases with increasing Fe ratio loaded.

Luminescence functionalization of SBA-15 by YVO4 : Eu3+ as a novel drug delivery system

Luminescence functionalization of the ordered mesoporous SBA-15 silica was realized by depositing a YVO4:Eu3+ phosphor layer on its surface via the Pechini sol-gel process, resulting in the formation of the YVO4:Eu3+@SBA-15 composite material. This material, which combines the mesoporous structure of SBA-15 and the strong red luminescence property of YVO4:Eu3+, can be used as a novel functional drug delivery system. The structure, morphology, porosity, and optical properties of the materials were well characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, N-2 adsorption, and photoluminescence spectra. As expected, the pore volume, surface area, and pore size of SBA-15 decrease in sequence after deposition of the YVO4:Eu3+ layer and the adsorption of ibuprofen (IBU, drug). The IBU-loaded YVO4:Eu3+@SBA-15 system still shows the red emission of Eu3+ (617 nm, D-5(0)-F-7(2)) under UV irradiation and the controlled drug release property. Additionally, the emission intensity of Eu3+ increases with an increase in the cumulative released amount of IBU in the system, making the extent of drug release easily identifiable, trackable, and monitorable by the change of luminescence. The system has great potential in the drug delivery and disease therapy fields.

Near-infrared luminescent mesoporous materials covalently bonded with ternary lanthanide [Er(III), Nd(III), Yb(III), Sm(III), Pr(III)] complexes

New near-infrared-luminescent mesoporous materials were prepared by linking ternary lanthanide (Er3+, Nd3+, Yb3+, Sm3+, Pr3+) complexes to the ordered mesoporous MCM-41 through a functionalized 1,10-phenanthroline (phen) group 5-(N,N-bis-3-(triethoxysilyl)propyl)ureyl-1,10-phenanthroline. The resulting materials (denoted as Ln(hfth)(3)phen-M41 and Pr(tfnb)(3)phen-M41; Ln=Er, Yb, Nd, Sm; hfth = 4,4,5,5,6,6,6-heptafluoro-1-(2-thienyl)hexane-1,3-dionate; tfnb = 4,4,4-trifluoro-1-(2-naphthyl)- 1, 3-butanedionate) were characterized by powder X-ray diffraction, N-2 adsorption/desorption, and elemental analysis. Luminescence spectra of these lanthanide-complex functionalized materials were recorded, and the luminescence decay times were measured. Upon excitation at the absorption of the organic ligands, all these materials show the characteristic NIR luminescence of the corresponding lanthanide (Er3+, Nd3+, Yb3+, Sm3+, Pr3+) ions by sensitization from the organic ligands moiety. The good luminescent performances enable these NIR-luminescent mesoporous materials to have possible applications in optical amplification (operating at 1300 or 1500 nm), laser systems, or medical diagnostics.

Stable ordered mesoporous silica materials templated by high-temperature stable surfactant micelle in alkaline media

Ordered hexagonal mesoporous silica material (JLU-30) has been successfully synthesized in alkaline media at high temperature (> 160 degreesC, using cationic (1,3-dimethyl-2-imidazolidin-2-ylidene)hexadecylmethyl-ammonium bromide (DIHAB) as a template, and characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen adsorption-desorption isotherms, differential thermal analysis (DTA), and thermogravimetric analysis (TG), as well as Al-27 and Si-29 nuclear magnetic resonance (NMR) spectroscopy. Mesoporous JLU-30 shows much higher hydrothermal stability than MCM-41. Si-29 NMR spectra indicate that the pore walls of JLU-30 samples synthesized at high temperature (160 degreesC) are fully condensed, giving a Q(4)/Q(3) ratio as high as 6.2. In contrast, MCM-41 synthesized at relatively low temperature (100 degreesC) shows the Q(4)/Q(3) + Q(2) ratio at 1.1. Such unique structural feature might be responsible for the observed highly hydrothermal stability of the mesoporous silica materials (JLU-30).

Synthesis and characterization of functionalized mesoporous silica by aerosol-assisted self-assembly

An efficient, productive, and low-cost aerosol-assisted self-assembly process has been developed to produce organically modified mesoporous silica particles via a direct co-condensation of silicate species and organosilicates that contain nonhydrolyzable functional groups in the presence of templating surfactant molecules. Different surfactants including cetyltrimethylammonium bromide, nonionic surfactant Brij-56, and triblock copolymer P123 have been used as the structure-directing agents. The organosilanes used in this study include tridecafluoro-1, 1,2,2-tetrahydrooctyltriethoxysilane, methytriethoxysilane, vinyltrimethoxysilane, and 3-(trimethoxysilyl)propyl methacrylate. X-ray diffraction and transmission electron microscopy studies indicate the formation of particles with various mesostructures. Fourier transform infrared and solid-state nuclear magnetic resonance spectra confirm the organic ligands are covalently bound to the surface of the silica framework. The porosity, pore size, and surface area of the particles were characterized using nitrogen adsorption and desorption measurements.

A transparent thin film with hexagonal mesostructure containing rhodamine 6G

A transparent thin film was prepared by depositing the sol-get mixture for the synthesis of MCM-41 mesoporous molecular sieve doped with rhodamine 6G (R6G) dye on glass substrates. The film of silica-surfactant-R6G materials, which was identified to possess hexagonally ordered mesostructure, was composed of nanocrystallites about 35 nm in diameter and 1-10 mum in thickness. Cleanness of the substrates, concentration of the sol-gel mixture and rate of evaporation of the solvent were the key factors affecting transparency and homogeneity of the film. Moreover, optical change and lack in dye aggregation were observed to the R6G-functionalized MCM-41 thin film in contrast with that in ethanol solution.