70 resultados para Bayes Formula
Resumo:
利用直流磁控反应溅射技术制备了氧气和氩气的分压比为5:100的NiOx薄膜。利用X射线衍射仪(XRD)、扫描电镜(SEM)、原子力显微镜(AFM)和光谱仪研究了热处理对薄膜的微观结构和光学性质的影响, 并对沉积态薄膜的粉末进行了热分析。沉积态的NiOx薄膜在262 ℃时开始分解, 导致NiOx薄膜的透过率增加和反射率降低。X射线衍射和示差扫描量热曲线(DSC)分析表明, 在热处理过程中并无物相的变化, 光学性质的变化是由于NiOx薄膜热分解引起薄膜表面形貌发生变化而引起的。通过Kissinger公式计算出
Resumo:
Based on the Collins integral formula, the analytic expressions of propagation of the coherent and the incoherent off-axis Hermite-cosh-Gaussian (HChG) beam combinations with rectangular symmetry passing through a paraxial first-order optical system are derived, and corresponding numerical examples are given and analysed. The resulting beam quality is discussed in terms of power in the bucket (PIB). The study suggests that the resulting beam cannot keep the initial intensity shape during the propagation and the beam quality for coherent mode is not always better than that for incoherent mode. Reviewing the numerical simulations of Gaussian, Hermite-Gaussian (HG) and cosh Gaussian (ChG) beam combinations indicates that the Hermite polynomial exerts a chief influence on the irradiance profile of composite beam and far field power concentration.
Resumo:
在充分考虑了空间背景光辐射特性以及漫反射目标对相干光和自然光的不同反射特性的基础上,利用信号检测的统计学方法,导出了空间电荷耦合器件(CCD)凝视成像跟踪系统分别在激光照明主动跟踪模式和太阳光照明被动跟踪模式下的作用距离表达式。结果表明,空间CCD凝视成像跟踪系统在脉冲能量为1mJ的激光照明主动跟踪模式下可对1m2空间漫反射目标实现10km量级范围内的跟踪;而利用太阳光照明的被动跟踪模式下的跟踪距离可达几百千米。
Resumo:
An analytical expression of a radial laser array for flat-topped beam is derived based on the generalized Collins formula. The intensity distribution of the resulting beam focused by a lens at the focus plane, for phase-locked and nonphase-locked cases, is studied numerically. The effect of the Fresnel number and normalized radius on intensity distribution for phase-locked and nonphase-locked cases is also presented. It is found that intensity distribution for nonphase-locked case is much less sensible to the Fresnel number and normalized radius than that of phase-locked case. (C) 2008 Elsevier Ltd. All rights reserved.
Resumo:
在Mie散射理论基础上,由单分散射的光强表达式导出在偏振光的入射条件下一定立体角内的散射光通量的表达式,并与自然光入射作比较。计算了在相同强度不同光源入射下,尘埃粒子计数器的两种常用散射光收集系统收集的散射光通量。结果表明:采用近前向散射光收集系统得到的光通量相等;而采用直角方向散射光收集系统时两者并不相等,且在平面偏振光入射时,收集的散射光通量还跟探测器中心与入射光偏振方向夹角有关。用MATLAB编程计算,得出了在探测器中心与偏振方向的夹角成90°或270°位置时,收集的散射光通量有极值的结论,为激光尘
Resumo:
采用提拉法生长了Yb^3+掺杂量分别为5.4at%,16.3at%,27.1at%,53.6at%和100at%的Yb:Y3Al5O12晶体.系统地表征和分析了Yb^3+掺杂量对晶体吸收光谱和荧光光谱的影响.随着Yb^3+掺杂量的增加,各峰值吸收系数呈线性增加的趋势.应用Smakula公式计算了各吸收峰对应的振荡强度,并分析了Yb^3+掺杂量对振荡强度的影响.当Yb^3+掺杂量增加到27.1at%时观察到了荧光猝灭现象;当Yb^3+掺杂量增加到53.6at%时,荧光光谱的线形发生了很大的变化。
Resumo:
Er3+ -doped Gd2SiO5 (Er:GSO) single crystal with dimensions of circle divide 35 x 40 mm(3) has been grown by the Czochralski method. The absorption and fluorescence spectra of the Er:GSO crystal were measured at room temperature. The spectral parameters were calculated based on Judd-Ofelt theory, and the intensity parameters Omega(2), Omega(4) and Omega 6 are obtained to be 6.168 x 10(-20), 1.878 x 10(-20), and 1.255 x 10(-20) cm(2), respectively. The emission cross-section has been calculated by Fuechtbauer-Ladenbury formula. (c) 2007 Elsevier B.V. All rights reserved.
Resumo:
The YAG crystal codoped with Yb3+ and Tm3+ has been grown by Czochralski (Cz) method. The crystal structure of the crystal has been determined by X-ray diffraction analysis. The absorption and emission spectra of Yb,Tm:YAG crystal at room temperature have also been studied. The emission cross-sections have been calculated by Fuechtbauer-Ladenburg formula and reciprocity method. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
Using the stratified gas flow model for calculating the conductance of long tubes with constant cross section, an analytical expression for calculating the conductance of along tube with equilateral triangle cross section has been derived. The formula given is applicable to the full pressure range. A minimum in the conductance in the intermediate flow state is shown. 2002 American vacuum Society.
Resumo:
介绍了电子束蒸发镀膜速率控制的基本原理和方法,选取实际生产中大量使用且蒸发特性较难控制的SiO_2和HfO_2,对两者的电子束蒸发速率控制分别进行了实验研究。采用比例积分微分(PID)闭环反馈控制,通过Ziegler-Nichols工程经验公式进行原始参量整定,并在实验的基础上对控制器的原始参量进行调整以及对积分作用和微分作用进行分区处理,速率控制的实验结果表明,采用该参量整定方法并结合工艺流程的改进,能获得良好的速率控制。针对速率控制中存在的难点问题进行了分析,并提出改进措施:将速率控制和电子枪扫描控制相结合能进一步改善速率控制。