叶绿体陪伴蛋白在几种藻类中的存在和分布

用豌豆叶绿体陪伴蛋白（ｃｈ－ｃｐｎ６０）的杭体对衣藻和多种蓝藻细胞提取液作Ｗｅｓｔ－ｅｒｎｂｌｏｔ分析表明：真核的衣藻和原核的有异形胞丝状蓝藻的一种鱼腥藻中存在一种与豌豆ｃｈ－ｃｐｎ６０抗体有交叉反应的蛋白，其一个亚基的分子量与豌豆该蛋白的分子量相似，而另一亚基的分子量高于豌豆的β亚基分子量。绿藻和丝状蓝藻中这一蛋白在热处理后含量增加，而经－２０℃冷处理１２ｈ后含量明显下降。在单细胞蓝藻中则检测不到这种蛋白。

白鱀豚饲养的研究

饲养池水使用自来水是切实可行的。水温在冬季不低于4℃,夏季不超过33℃。白暨豚以淡水鱼类为食,其日食量一般占体重的10—11%,炎夏减到8—9%,寒冬可增到12%。豢养四年的淇淇,其体长和体重增长的关系式为:y=-237.4+2.2x。饲养的关键有二:一是水质,经常洗池换水以保持水质清洁;二是食物,饲料鱼要挑选健康、新鲜,无污染的鱼类,喂前进行消毒,每天还要给以维生素类药品,以作营养补充。

杭州西湖水生植被恢复的途径与水质净化问题

<正> 我国著名的风景湖泊——杭州西湖、南京玄武湖、北京昆明湖、武汉东湖和昆明滇池等,由于人类经济活动的影响,特别是由于生活污水的大量排人和渔业生产的影响,致使湖泊富营养化问题越来越严重,不仅降低了旅游价值,而且有害于沿湖居民的生活和健康,因此引起人们的极大关注。杭州西湖富营养化程度相当严重,尽管在五十年代采取了挖泥疏浚的措施,

丝藻目的一新属——骈丝藻属

<正> 1976年6月至8月,中国科学院青藏高原综合科学考察队藏北分队对冈底斯山,念青唐古拉山以北,昆仑山以南的广大藏北地区进行了多学科的综合考察。我所陈宜瑜同志参加了这次考察,对该地区各种水体的水生生物进行了广泛地采集,在采得的标本中,藻类是十分丰富的。我们在鉴定该区振泉湖藻类标本时,发现一特殊类型的藻类。通过对液浸标本和固定染色标本的研究,确定它是绿藻门丝藻目的一新属。

黑龙江流域的水生维管束植物

<正> 水体中水生维管束植物的种类组成及数量的多寡,对于渔业是有着密切关系的。有些主要的经济鱼类(如草鱼、鳊、鲤、鲫等)是以水生维管束植物作主要的食料,也有很多产粘着性卵的鱼类(如鲤、鲫、鲶等)要把卵产在水生植物上;一些高等水生植物的多寡也直接或间接地影响底棲生物和浮游生物的生长繁殖。另一方面,有些高等水生植物的大量繁殖,对于鱼类却有不良的影响。因此,调查了解流域中水生高等植物的种类和数量对于正确地估价水体生产力是有帮助的。

Oligochaete assemblages associated with macrophytes in the Liangzi Lake District, China

The assemblage of oligochaetes in the Liangzi Lake District, located in middle reaches of the Changjiang River, was studied from May to August, 2001. To establish species composition, richness, and abundance and detect the influence of environmental variables on oligochaete distributional patterns, 45 localities were sampled. All total, 20 species belonging to the families Naididae (eight species), Tubificidae (11 species), and Lumbriculidae (one species) were found. Branchiura sowerbyi, Tubifex sp. 1, and Aulodrilus pluriseta were the dominant species and contributed nearly 70% of the total abundance. The 45 sampling sites were separated into three groups based on composition and relative abundance of benthic oligochaete communities using two-way indictor species analysis associated with detrended correspondence analysis. Canonical correspondence analysis indicated that two plant variables (total plant cover and total submersed macrophyte biomass) were strongly correlated with the faunal gradient (p < 0.05). Other predicator variables were water depth and total nitrogen.

Isolation and characterization of polymorphic microsatellites in a sex-reversal fish, rice field eel (Monopterus albus)

The rice field eel (Monopterus albus) is a fish of economic importance in China and some Asian countries. From a (GT)(n)-enriched genomic library, 30 microsatellites were developed by employing the fast isolation by AFLP of sequences containing repeats (FIASCO) protocol. Thirteen loci exhibited polymorphism with two to 13 alleles (mean 7.9 alleles/locus) in a test population and observed heterozygosity ranged from 0.3125 to 0.9688 (mean 0.7140). These loci should provide sufficient level of genetic variation to study the fine-scale population structure and reproductive ecology of the species.

Phylogenetic relationships among Trichodinidae (Ciliophora : Peritricha) derived from the characteristic values of denticles

The phylogenetic relationships among trichodinids remain obscure. As an important diagnostic marker, the morphology of the denticles in the adhesive disc as well as the adoral spiral has been widely used in generic discrimination and species identification of trichodinids. We studied the characters of denticles of the ten genera of Trichodinidae and the sole genus Urceolaria of Urceolariidae by using a quantitative method. The characteristic values were used to generate Manhattan distance, on which the dendrogram was based to construct with the Unweighted Paired Group Method using the Arithmetic mean (UPGMA). The investigations show that all the genera of the family Trichodinidae were clearly separate from the outgroup Urceolaria, and within the Trichodinidae: (i) Dipartiella grouped with Trichodinella and Tripartiella and lay in the closest position to the outgroup with a low dissimilarity, suggesting Dipartiella might be the most primitive genus in the family; (ii) Hemitrichodina clustered in a single clad and lay in the farthest position to the outgroup with the highest dissimilarity, indicating that it might be the most advanced genus; and (iii) the other 6 genera, Trichodina, Paratrichodina, Semitrichodina, Vauchomia, Pallitrichodina and Trichodoxa clustered in a big clad with very low dissimilarity, showing that they are closely related to each other. We discuss the evolutionary trend of the denticle and conclude that the denticles of the adhesive disc should be an apomorphic feature of the trichodinids and their changes could reflect the evolutionary tendencies of these ciliates.

Mortalities induced by the copepod Sinergasilus polycolpus in farmed silver and bighead carp in a reservoir

The frequency distributions of the parasitic copepod Sinergasilus polycolpus were examined in silver carp Hypophthalmichthys molitrix and bighead carp Aristichthys nobilis during a disease outbreak of the 2 species of fish in a reservoir in China. The mean abundance of the copepod was positively related with host length and age, and the overdispersion of the copepod in both silver and bighead carp was fitted well with negative binomial distribution. Although parasite-induced host mortality was observed, a peaked age-parasite abundance curve was not detected in the present parasite-host system. It is also proposed that this peaked age-abundance curve is unlikely to be observed in its natural host populations.

The growth temperatures dependence of optical and electrical properties of InN films

InN films grown on sapphire at different substrate temperatures from 550 degrees C to 700 degrees C by metalorganic chemical vapor deposition were investigated. The low-temperature GaN nucleation layer with high-temperature annealing (1100 degrees C) was used as a buffer for main InN layer growth. X-ray diffraction and Raman scattering measurements reveal that the quality of InN films can be improved by increasing the growth temperature to 600 degrees C. Further high substrate temperatures may promote the thermal decomposition of InN films and result in poor crystallinity and surface morphology. The photoluminescence and Hall measurements were employed to characterize the optical and electrical properties of InN films, which also indicates strong growth temperature dependence. The InN films grown at temperature of 600 degrees C show not only a high mobility with low carrier concentration, but also a strong infrared emission band located around 0.7 eV. For a 600 nm thick InN film grown at 600 degrees C, the Hall mobility achieves up to 938 cm(2)/Vs with electron concentration of 3.9 x 10(18) cm(-3).

Surface plasmon modulated nano-aperture vertical-cavity surface-emitting laser

We have fabricated surface plasmon modulated nano-aperture vertical-cavity surface-emitting lasers (VCSELs) from common 850 nm VCSELs using focus ion beam etching with Ga+ ion source. The far-field output power is about 0.3 mW at a driving current of 15 mA with a sub-wavelength aperture surrounded by concentric periodic grooves. The enhancement of transmission intensity can be explained by diffraction and enhanced fields associated with surface plasmon. This structure also exhibits beaming properties.

1.55-mu m Ridge DFB laser and electroabsorption modulator integrated with buried-ridge-stripe dual-waveguide spot-size converter output

A 1.55-mu m ridge distributed feedback laser and electroabsorption modulator monolithically integrated with a buried-ridge-stripe dual-waveguide spot-size converter (SSC) at the output port for low-loss coupling to a cleaved single-mode optical fiber was fabricated by means of selective area growth, quantum-well intermixing, and dual-core technologies. These devices exhibit threshold current of 28 mA, 3-dB modulation bandwidth of 12.0 GHz, modulator extinction ratios of 25.0-dB dc. The output beam divergence angles of the SSC in the horizontal and vertical directions are as small as 8.0 degrees x 12.6 degrees, respectively, resulting in 3.2-dB coupling loss with a cleaved single-mode optical fiber.

The content calculation of hexagonal phase inclusions in cubic GaN films on GaAs(001) substrates grown by metalorganic chemical vapor deposition

Cubic GaN(c-GaN) films are grown on GaAs(001) substrates by metalorganic chemical vapor deposition (MOCVD). Two GaN samples were grown with different buffer layer, the deposition time of each was 1 and 3 min, respectively. 4-circle X-ray double crystal diffraction (XRDCD) was used to study the secondary crystallographic phases presented in the c-GaN films. The phase composition of the epilayers was determined by X-ray reciprocal space mapping. The intensities of the c-GaN(002) and h-GaN(10 (1) over bar 1) planes detected in the mapping were investigated by omega scans. The content of the hexagonal phase inclusions in the c-GaN films was calculated to about 1.6 and 7.9%, respectively. The thicker buffer layer is not preferable for growing high quality pure c-GaN films. (C) 2000 Elsevier Science S.A. All rights reserved.

Formation and magnetic properties of Fe16N2 films prepared by ion-beam-assisted deposition

Fe-N films containing the Fe16N2 phase were prepared in a high-vacuum system of ion-beam-assisted deposition (IBAD). The composition and structure of the films were analysed by Auger electron spectroscopy (AES) and X-ray diffraction (XRD), respectively. Magnetic properties of the films were measured by a vibrating sample magnetometer (VSM). The phase composition of Fe-N films depend sensitively on the N/Fe atomic arrival ratio and the deposition temperature. An Fe16N2 film was deposited successfully on a GaAs (1 0 0) substrate by IBAD at a N/Fe atomic arrival ratio of 0.12. The gram-saturation magnetic moment of the Fe16N2 film obtained is 237 emu/g at room temperature, the possible cause has been analysed and discussed. Hysteresis loops of Fe16N2 have been measured, the coercive force H-c is about 120 Oe, which is much larger than the value for Fe, this means the Fe16N2 sample exhibits a large uniaxial magnetocrystalline anisotropy. (C) 1998 Elsevier Science B.V. All rights reserved.

Implantable Microsystem for Wireless Neural Recording Applications

A prototype microsystem is presented for wireless neural recording application. An inductive link was built for transcutaneous wireless power transfer and data transmission. Total 16.5 mW power and 50 bps - 2.5 Kbps command data can be received over 1 - 5 MHz with a distance of 0-10 mm. The integrated amplifiers were designed with a limited bandwidth for neural signals acquisition. The gain of 60 dB was obtained by preamplifier at 7 Hz - 3 KHz. An integrated FM transmitter was used to transmit the extracted neural signals to external equipments with 0.374 - 2 mW power comsumption and a maximum data rate of 500 Kbps at 100 MHz. All the integrated circuits modules except the power recovery circuit were tested or stimulated under a 3.3 V power supply, and fabricated in standard CMOS processing.