Fabrication and Luminescence Properties of One-Dimensional CaMoO4: Ln(3+) (Ln = Eu, Tb, Dy) Nanofibers via Electrospinning Process

One-dimensional CaMoo(4):Ln(3+) (Ln = Eu, Tb, Dy) nanofibers have been prepared by a combination method of sol-gel and electrospinning process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL), and low voltage cathodoluminescence (CL) as well as kinetic decays were used to characterize the resulting samples. SEM and TEM analyses indicate that the obtained precursor fibers have a uniform size, and the as-formed CaMoO4:Ln(3+) nanofibers consist of nanoparticles. Under ultraviolet excitation, the CaMoO4 samples exhibit a blue-green emission band with a maximum at 500 nm originating from the MoO42- groups. Due to an efficient energy transfer from molybdate groups to dopants, CaMoO4:Ln(3+) phosphors show their strong characteristic emission under ultraviolet excitation and low-voltage electron beam excitation.

基于2,5-二(4-氨基苯)嘧啶聚酰亚胺的合成及性能表征

1,5-二氮杂戊二烯盐(vinamidium salts)与4-硝基苯甲脒盐在碱性物质的存在下发生成环反应得含嘧啶环的硝基化合物;硝基化合物用Pd/C和水合肼还原得到棒状含氮芳杂环二胺——2,5-二(4-氨基苯基)嘧啶.通过1H-NMR,13C-NMR,IR,MS及元素分析确证了含氮芳杂环二胺及其中间产物的结构.这种二胺或加一定量对苯二胺与均苯二酐(PMDA)或联苯二酐(BPDA)通过两步法聚合获得一系列聚酰亚胺,通过红外、动态力学、静态力学、热重分析、广角X射线衍射等实验测试了该类聚合物的结构、热性能、机械性能及结晶性能.

Heptaaquatetra-mu(3)-hydroxy-hexa-mu(2)-L-leucine-(L-leucine)tetraytterbium(III) tetrachlorozinc(II) trichlorohydroxyzinc(II) tetrachloride octahydrate

The title bimetallic compound, [Yb-4(mu(3)-OH)(4)(C6H13NO2)(7)-(H2O)(7)][ZnCl4][ZnCl3(OH)]Cl-4.8H(2)O, was synthesized at near physiological pH (6.0). The compound exhibits some novel structural features, including an asymmetric [Yb-4(mu(3)-OH)(4)(L-leucine)(7)(H2O)(7)](8+) complex cation in which four OH groups act as bridging ligands, linking four Yb3+ cations into a Yb4O4 structural unit. Each pair of adjacent Yb3+ ions is further bridged by one carboxy group from a leucine ligand. Water molecules and a monodentate leucine ligand also coordinate to Yb3+ ions, completing their eight-coordinate square-antiprismatic coordination. The Yb-4(mu(3)-OH)(4)(L-leucine)(7)(H2O)(7)](8+) cation, the [ZnCl4](2-), [ZnCl3OH](2-) and Cl- anions, and the lattice water molecules are linked via hydrogen bonds.

Synthesis and properties of soluble polyimides based on isomeric ditrifluoromethyl substituted 1,4-bis(4-aminophenoxy)benzene

A new fluorinated diamine monomer, [1,4-bis(4-amino-3-trifluoromethylphenoxy)benzene (2)], and a known isomeric analog 1,4-bis(4-amino-2-trifluoromethylphenoxy)benzene (3) were synthesized. A series of organosoluble polyimides Ia-d and IIa were prepared from the diamines (2, 3) and dianhydrides (a-d) by a high-temperature one-step method. The effects of the trifluoromethyl substituents on the properties of polyimides were evaluated through the study of their soluble, thermal, optical, and gas permeability properties. Polyimides (Ia-d) had glass transition temperatures between 229 and 279 degrees C, and the temperatures at 5% weight loss ranged from 510 to 533 degrees C under nitrogen. These polyimides could be cast into flexible and tough membranes from DMAc solutions. The membranes had tensile strengths in the range of 137-169 MPa, tensile modulus in the range of 1.6-2.2 GPa and elongations at break from 11% to 14%. The polyimide la with trifluoromethyl groups ortho to the imide nitrogen exhibited enhanced gas permeability, solubility, transparency, and thermal stability compared with the isomeric polyimide IIa with the CF3 group meta to the imide nitrogen.

Synthesis and characterization of tris(cyclopentylcyclopentadienyl)lanthanide complexes (C5H9C5H4)(3)NdBrLi(THF)(3) and (C5H9C5H4)(3)SmTHF

(C5H9C5H4)(3)NdBrLi(THF)(4)(1)(C5H9=cyclopentyl) was obtained from the reaction of NdCl3 with C5H9C5H4Na and LiBr (Nd:Na:Li=1:2:1 molar ratio) in THE X-ray crystallography showed that the ten-coordinated neodymium atom is bonded to three cyclopentylcyclopentadienyl(eta(5)) rings and a single bromine atom bridging a lithium which is bonded to three THF molecules. Complex 1 is triclinic, P1 space group with unit dimensions of a= 12.048(2), b= 13.498(3), c= 13.831(3)Angstrom, a = 104.16(3), beta = 104.07(3), gamma =95.96(3)degrees, V=2083.3(7)Angstrom(3), Z=2, D-c=1.35Mg/m(3) and F(000)=874. (C5H9C5H4)(3)SmTHF (2) was synthesized by reaction of anhydrous SmCl3 with C5H9C5H4Na at a molar ratio of 1:3. The structure was determined by X-ray crystallography. The ten-coordinated samarium atom is bonded to three cycloperrtylcyclopentadienyl rings and one oxygen of THF molecule to form a pseudo-tetrahedron. Complex 2 is orthorhombic, Fdd2 space group with unit cell dimensions of a =28.175(5)Angstrom, b =46.24(2) Angstrom, c =9.167(4) Angstrom(3), V=11943(8)Angstrom(3), Z= 16, D-c = 1.38Mg/m(3) and F(000)=5136.

Synthesis, crystal structure and reactivity of (2,4-C7H11)(2)Yb center dot DME

(2,4-C7H11)(2)Yb . DME was synthesized by the reaction of YbCl3 with K(2,4-C7H11)(2,4-dimethylpentadienyl potassium), and the single crystal X-ray diffraction showed that the complex exists in a cis- staggered conformation. Thf crystal of the compound belongs to the monoclinic space group P2(1)/n with a = 0.675 2 (1) nm, b = 1.490 6 (1) nm, c = 1.529 3 (2) nm, beta = 97.55 (2)degrees, V = 1.977 79 (4) nm(3), Z = 4, F(000) = 735.8 e, mu = 49.49 cm(-1), R = 0.033 and R-w = 0.032. The title complex can be used as a catalyst for the polymerization of methyl methacrylate (MMA).

Novel sodium sulfonate-functionalized poly(ether ether ketone)s derived from 4,4 '-thiodiphenol

Novel sodium sulfonate-functionalized poly(ether ether ketone)s derived from 4,4'-thiodiphenol with degree of sulfonation up to 2.0 were synthesized by nucleophilic polycondensation of various amount of 5,5 '-carbonylbis(2-fluorobenzenesulfonate) (1) and 4,4'-difluorobenzophenone (2) with 4,4'-thiodipheno (3). Component and structure of the polymers were confirmed by TR, NMR and elemental analysis. Wide angle X-ray diffraction patterns indicated an amorphous structure of the polymers. All the polymers showed excellent thermal stability and poor solubility in water. (C) 2001 Elsevier Science Ltd. All rights reserved.

α-羰基烯酮环二硫代缩醛化学(XXXVI)──β,β-1,3-亚丙二流基-α,β-不饱和芳酮与Grignard试剂加成物的硅胶催化分解反应

以β，β-1，3-亚丙二硫基-α，β-不饱和芳酮2与烯丙基或等基Grfenard试剂可选择性地进行1，2-加成得醇3、4，在硅胶G的催化下，醇3、4可分解生成β，γ-不饱和芳酮5、6．并对该分解反应的机制进行了初步探讨.

Gas permeability in polyimides from oxydianiline and isomeric thiaphthalic dianhydride or 1,4-bis(dicarboxyphenoxy) benzene dianhydride

The gas permeability and permselectivity properties were investigated of polyimides, prepared from 3,3',4,4'- and 2,2',3,3'-thiaphthalic dianhydride (p-TDPA and m-TDPA, respectively), or 1,4-bis(3,4-dicarboxyphenoxy)- and 1,4-bis(2,3-dicarboxyphenoxy) benzene dianhydride (p-HQDPA and m-HQDPA, respectively), and 4,4-oxydianiline. The polyimides prepared from meta-dianhydrides, which have lower chain-segment packing density, possess higher permeability and lower permselectivity than those prepared from para-dianhydrides. Copyright (C) 1996 Elsevier Science Ltd.

La_(2-x)Sr_xNiO_(4-λ)系列催化剂结构与氨氧化活性的关系

本文报道了La_(2-x)Sr_xNiO_(4-λ)(O≤x≤1)系列复合氧化物的固体结构性质和用于氨的氧化制硝酸的催化性能.La_(2-x)Sr_xNiO_(4-λ)的晶胞体积Ⅴ随x的增大而逐渐减小;c轴在x≤0.5前逐渐增大,在x≥0.5后逐渐减小.a轴在x≤0.5前逐渐减小,在x≥0.5后基本保持恒定.在x≤0.5前,La_(2-x)Sr_xNiO_(4-λ)中存在氧过剩,在x≥0.5后存在氧缺陷.TPD表明,a氧(吸附在氧缺陷上的氧)在x=0.6时出现极大,β氧(晶格氧)随x增大而逐渐增大.La_(2-x)Sr_xNiO_(4-λ)的氧化还原能力,Ni~(3+)的量,氨氧化的NO选择性都随x增大而增加.由此得出,Ni~(3+)是催化剂的活性离子,β氧是氨的氧化的活性氧种,在La_(2-x)Sr_xNiO_(4-λ)上的氨的氧化遵循氧化还原(Redox)机理.

异丙基磷酸单(1-已基-4-乙基)辛酯萃取分离锆、钍、钛、铁、镥及其机理

本文通过异丙基膦酸单(1-己基-4-乙基)辛酯在硫酸介质中对Zr~(4+)、Th~(4+)、Ti~(4+)、Fe~(3+)、Lu~(3-)的萃取平衡研究,探讨了Zr~(4-)与其它离子分离的可能性,提出了萃取Zr~(4-)的三种反应机理,并计算了萃取反应平衡常数和热力学函数.

含二羟基二苯酮的系列热致液晶共聚酯的合成和表征──Ⅲ．含4，4＇－二羟基二苯砜结构的共聚酯

含二羟基二苯酮的系列热致液晶共聚酯的合成和表征──Ⅲ．含４，４＇－二羟基二苯砜结构的共聚酯董德文，池振国，倪玉山，丁孟贤（中国科学院长春应用化学研究所长春１３００２２）陈玉（东北师范大学分析测试中心长春１３００２４）关键词４，４＇－二羟基二苯酮，热致...

掺Ce~（3＋）、Tb~（3＋）的M_3Y_2（BO_3）_4（M＝Ca，Sr）

采用固相反应的方法；经二次灼烧合成了掺Ｃｅ（３＋）、Ｔｂ（３＋）的Ｃａ３Ｙ２（ＢＯ３）４和Ｓｒ３Ｙ２（ＢＯ３）４磷光体；分析了合成过程中铈的还原情况．用Ｘ－射线衍射分析确定了它们的结构均为正交晶系，空间群Ｐ２１ｃｎ测定了Ｃｅ（３＋）和Ｔｂ（３＋）在两种基质中的光谱，得到Ｃｅ（３＋）波长位移的某些规律，观察到Ｃｅ（３＋）对Ｔｂ（３＋）的敏化作用．

YP_xV_(1-x)O_4(0≤x≤1):Dy~(3+)的合成及其光谱性质的研究

本文报道了不同组成的YP_xV_(1-x)O_4(0≤x≤1):Dy~(3+)的合成和结构。YP_xV_(1-x)O_4(0≤x≤1)为四方晶系,晶胞参数随x的增大呈线性减小。基质的Stokes位移随x的增大逐渐变大,而激发光谱峰值则向短波方向移动。在YP_xV_(1-x)O_4:0.006Dy~(3+)体系中,x>0.4时出现的基质发射是由P0_4~(3-)引起的。基质及Dy~(3+)的发光效率和Dy~(3+)的发光强度的黄蓝比均与x有关。同时探讨了Bi~(3+)和温度对Dy~(3+)的发光强度的影响。

在镍系钙钛石型催化剂上的氨氧化 Ⅰ.催化剂La_(1-x)Sr_xNiO_(3-λ)的结构与催化性能

研究了La_(1-1·333X)Th_XNiO_(3-λ)(0≤x≤0.75)催化剂的固态性质与催化氢氧化性能的关系。发现在LaNiO_3中掺入Th~(4+)能形成阳离子空位,稳定体系中Ni~(3+)浓度和降低氧空位的有序化程度,从而提高了催化剂的NO选择性。氨氧化制硝酸的主要活性氧种可能是定位在氧空位上的O~-离子。催化机理遵从Redox机理,阳离子空位的形成有利于Redox过程的进行。