Amperometric glucose biosensor based on lipid film

A novel glucose biosensor based on cast lipid film was developed. This model of biological membrane was used to supply a biological environment on the surface of the electrode, moreover it could greatly reduce the interference and effectively exclude hydrophilic electroactive material from reaching the detecting surface. TTF was selected as a mediator because of its high electron-transfer efficiency, and it was incorporated in the lipid film firmly. Glucose oxidase was immobilized in hydrogel covered on the lipid film. The effects of pH, operating potential were explored for the optimum analytical performance by using amperometric method. The response time of the biosensor was less than 20 s, and the linear range is up to 10 mmol l(-1) (corr. coeff. 0.9932) with the detection limit of 2 x 10(-5) mol l(-1). The biosensor also exihibited good stability and reproducibility. (C) 2000 Elsevier Science S.A. All rights reserved.

Effects of rubber content and temperature on dynamic fracture toughness of ABS materials

The effects of rubber content and temperature on dynamic fracture toughness of ABS materials have been investigated based on the J-integral and crack opening displacement (COD, delta) concepts by an instrumented Charpy impact test. A multiple specimens R-curve method and stop block technique are used. It is shown that the materials exhibit a different toughness behavior, depending on rubber content and temperature. The resistance against stable crack initiation (J(0.2) or delta(0.2)) increases with increasing rubber content. However, J(0.2) first increased with increasing temperature until reaching the maximum value; after that, it decreases with further increasing the temperature. (C) 2000 John Wiley & Sons, Inc.

Effects of rubber content and temperature on unstable fracture behavior in ABS materials with different particle sizes

The fracture behavior of ABS materials with a particle diameter of 110 nm and of 330 nm was studied using instrumented Charpy impact tests. The effects of rubber content and temperature on fracture behavior, deformation mode, stable crack extension, plastic zone size, J-integral value, and crack opening displacement were investigated. In the case of a particle size of 110 nm, the material was found to break in a brittle manner, and the dominant crack mechanism was unstable crack propagation. Fracture toughness increases with increasing rubber content. In the case of a particle size of 330 nm, brittle-to-tough transition was observed. The J-integral value first increases with rubber content, then levels off after the rubber content is greater than 16 wt %. The J-integral value of a particle diameter of 330 nm was found to be much greater than that of 110 nm. The J-integral value of both series first increased with increasing temperature until reaching the maximum value, after which it decreased with further increasing temperature. The conclusion is that a particle diameter of 330 nm is more efficient than that of 110 nm in toughening, but for both series the effectiveness of rubber modification decreases with increasing temperatures higher than 40 degreesC because of intrinsic craze formation in the SAN matrix at temperatures near the glass transition of SAN. (C) 2000 John Wiley & Sons, Inc.

SPIN AND VALENCE STATE EQUILIBRIA OF COBALT AND MAGNETIC-PROPERTIES OF LACOO3

On the basis of the spin and valence state equilibria and superexchange interaction of the various cobalt ions in LaCoO3, an approximate semiempirical formula has been proposed and used to calculate magnetic susceptibilities of LaCoO3 over a wide temperature range (100-1200 K). The results indicate that there are thermodynamic equilibria between the low spin state Co(III) (t2g6e(g)0) ion, the high spin state Co3+ (t2g4e(g)2) ion, the Co(II) (t2g6e(g)1) ion and the Co(IV) (t2g5e(g)0) ion in LaCoO3. The energy difference between the low spin state Co(III) and the high spin state Co3+ is about 0.006 eV. The content of the low spin state Co(III) ion is predominant in LaCoO3 and the content of the high spin state Co3+ ion varies with temperature, reaching a maximum at about 350 K, then decreasing gradually with increasing temperature. At low temperature the contents of the Co(II) ion and the Co(IV) ion in LaCoO3 are negligible, while above 200 K the contents of both the Co(II) ion and the Co(IV) ion increase with increasing temperature; however, the content of the Co(II) ion always is larger than that of the Co(IV) ion at any temperature. These calculated results are in good agreement with experimental results of the Mossbauer effect, magnetic susceptibility and electrical conductivity of LaCoO3.

DETERMINATION OF TRACE AMOUNT OF 14 RARE-EARTH IMPURITIES IN HIGH-PURITY YTTRIUM-OXIDE WITH ICP-AES

A method of analysis of high purity yttrium oxide with ICP-AES was described with emphasis on the study of Y_2O_3 matrix effects. The results showed that the line intensities of ana]ytes decreased with the increase of Y_2O_3 concentration in solution because of following factors. (1) The presence of matrix resulted in the decrease of the amount of analytes reaching ICP. (2) Matrix Y_2O_3 entering the plasma decreased the excitation temperature of the plasma and depressed the ionization of analytes in the pl...

Three-stage transformation of chlorophyll transient fluorescence pattern under sustained dehydration and the discovery of critical water content in seaweeds

The chlorophyll fluorescence kinetics of marine red alga Grateloupia turutunt Yamada, green alga Ulva pertusa Kjellm and brown alga Laminaria japonica Aresch during natural sustained dehydration were monitored and investigated. The pulse amplified modulation (PAM) system was used to analyze the distinct fluorescence parameters during thallus dehydration. Results proved that the fluorescence kinetics of different seaweed all showed three patterns of transformation with sustained water loss. These were: 1) peak kinetic pattern (at the early stage of dehydration fluorescence enhanced and quenched subsequently, representing a normal physiological state). 2) plateau kinetic pattern (with sustained water loss fluorescence enhanced continuously but quenching became slower, finally reaching its maximum). 3) Platform kinetic pattern (fluorescence fell and the shape of kinetic curve was similar to plateau kinetic pattern). A critical water content (CWC) could be found and defined as the percentage of water content just prior to the fluorescence drop and to be a significant physiological index for evaluation of plant drought tolerance. Once thallus water content became lower than this value the normal peak pattern can not be recovered even through rehydration, indicating an irreversible damage to the thylakoid membrane. The CWC value corresponding to different marine species were varied and negatively correlated with their desiccation tolerance, for example. Laminaria japonica had the highest CWC value (around 90%) and the lowest dehydration tolerance of the three. In addition, a fluorescence "burst" was found only in red algae during rehydration. The different fluorescence parameters F-o, F-v and F-v, F-m were measured and compared during water loss. Both F-o and F-v increased in the first stage of dehydration but F-v/F-m. kept almost constant. So the immediate response of in vivo chlorophyll fluorescence to dehydration was an enhancement. Later with sustained dehydration F-o increased continuously while F-v decreased and tended to become smaller and smaller. The major changes in fluorescence (including fluorescence drop during dehydration and the burst during rehydration) were all attributed to the change in F-o instead of F-v This significance of F-o indicates that it is necessary to do more research on F-o as well as on its relationship with the state of thylakoid membrane.

Effects of ultra-violet irradiation on sperm motility and diploid gynogenesis induction in large yellow croaker (Pseudosciaena crocea) undergoing cold shock

Large yellow croaker, Pseudosciaena crocea, exhibit sexually dimorphic growth, with females growing faster and reaching larger adult sizes than males. Thus, development of techniques for preferentially producing females is necessary to optimize production of these species. We have established a protocol to produce all-female croaker P. crocea through induction of meiotic gynogenesis with homologous sperm. The first set of experiments investigated the ultra-violet (UV) irradiation on sperm motility and duration of sperm activity to determine the optimal UV dosage for genetic inactivation of sperm, yet retaining adequate motility for activation of eggs. Milt from several males was diluted 1: 100 with Ringer's solution and UV irradiated with doses ranging from 0-150 J cm (-2). The results indicated that motility and duration of activity generally decreased with increased UV doses. At UV doses greater than 105 J cm(-2), after fertilization, motility was < 10% and fertilization rates were significantly lower. Highest hatching rate was obtained at 75 J cm -2. A second set of experiments was carried out to determine appropriate conditions of cold shock for retention of the 2nd polar body in P. crocea eggs after fertilization with UV-inactivated sperm by altering the timing, temperature and duration of shock. At 208 degrees C, shock applied at 3 min after fertilization resulted in higher survival rate of larvae at 6 h after hatching. Results of different combinations of three shock temperatures ( 28 degrees C, 38 degrees C or 48 degrees C) and five shock durations ( 4 min, 8 min, 12 min, 16 min or 20 min) at 3 min after fertilization demonstrated that shocks of 12 min gave highest production of diploid gynogens. Statistical analysis revealed that maximum production of diploid gynogens (44.55 +/- 2.99%) were obtained at 38 degrees C. The results of this study indicate that the use of UV-irradiated homologous sperm for activation of P. crocea eggs and cold shock for polar body retention is an effective method for producing gynogenetic offspring.

Induction of diploid gynogenesis in turbot Scophthalmus maximus with left-eyed flounder Paralichthys olivaceus sperm

Turbot Scophthalmus maximus exhibits sexually dimorphic growth, with females growing faster and reaching larger adult sizes than males. Thus, development of techniques for preferentially producing females is necessary to optimize production of these species. In this paper, gynogenetic diploids of turbot were induced by activating egg development with ultraviolet (UV)-irradiated left-eyed flounder Paralichthys olivaceus sperm combined with cold shock to prevent extrusion of the second polar body. The results of UV irradiation experiments showed that survival, motility, and duration of activity of P. olivaceus sperm generally decreased with increase in UV dose. The typical Hertwig's effect was observed after fertilized turbot eggs with UV-irradiated P. olivaceus sperm and the optimal UV dose for gynogenetic haploid production was 36,000 erg mm(-2). At 15 degrees C, appropriate timing of cold shock for retention of the second polar body in turbot eggs was at 6 min after fertilization. Results of different combinations of two shock temperatures (1 or 3 degrees C) and four shock durations (15, 25, 35 or 45 min) at 6 min after fertilization demonstrated that shock of 25 min at 1 degrees C gave the highest production of diploid gynogens (39.58% relative to its diploid control). The results of this study reveal that the use of UV-irradiated P. olivaceus sperm for activation of turbot eggs and cold shock for polar body retention is an effective method to produce gynogenetic offspring.

There are two 5 '-flanking regions of bkt encoding beta-carotene ketolase in Haematococcus pluvialis

The unicellular green alga Haematococcus pluvialis accumulates a commercially valuable astaxanthin, with levels reaching up to 4% dry weight under environmental stress. In recent years, much effort has been devoted to understanding the molecular mechanisms regulating astaxanthin biosynthetic pathways. Beta-carotene ketolase (bkt), with control being exhibited at the transcription level, plays an important role in astaxanthin biosynthesis by H. pluvialis. Here we demonstrate the presence of two separate 5'-flanking regions [1.5 kilobase (kb) and 2 kb] of bkt (bkt1 and bkt2) that possess regulatory elements similar to those of known stress-responsive genes in plants. Results of 5'-deletion constructs and transient beta-galactosidase expression assays demonstrate that there may be positive regulatory elements governing expression in the shorter promoter at -1060/-900 from the 1.5 kb 5' region, and in the longer promoter at -1838/-1219 and at -1046/ -734 from the 2 kb 5' region relative to each homologous ATG start codon. Furthermore, our present studies reveal that the first intron (+371/+497) downstream from the 1.5 kb 5' untranslated region of bkt1 may function as a negative regulatory element to regulate its own promoter.

Sedimentary features of the Yangtze River-derived along-shelf clinoform deposit in the East China Sea

A predominant sigmoidal clinoform deposit extends from the Yangtze River mouth southwards 800 kin along the Chinese coast. This clinoform is thickest (similar to 40m) between the 20 and 30 m isobaths and progressively thins offshore, reaching water depths of 60 and 90 m and distances up to 100 km offshore. Clay mineral, heavy metal, geochemical and grain-size analyses indicate that the Yangtze River is the primary source for this longshore-transported clinoform deposit. Pb-210 chronologies show the highest accumulation rates (> 3 cm/yr) occur immediately adjacent to the Yangtze subaqueous delta (north of 30 degrees N), decreasing southward alongshore and eastward offshore. The interaction of strong tides, waves, the China Coastal Current, winter storms, and offshore upwelling appear to have played important roles in trapping most Yangtze-derived sediment on the inner shelf and transporting it to the south. (c) 2006 Elsevier Ltd. All rights reserved.

The Obduction of Equatorial 13 degrees C Water in the Pacific Identified by a Simulated Passive Tracer

The obduction of equatorial 13 degrees C Water in the Pacific is investigated using a simulated passive tracer of the Consortium for Estimating the Circulation and Climate of the Ocean (ECCO). The result shows that the 13 degrees C Water initialized in the region 8 degrees N-8 degrees S, 130 degrees-90 degrees W enters the surface mixed layer in the eastern tropical Pacific, mainly through upwelling near the equator, in the Costa Rica Dome, and along the coast of Peru. Approximately two-thirds of this obduction occurs within 10 years after the 13 degrees C Water being initialized, with the upper portion of the water mass reaching the surface mixed layer in only about a month. The obduction of the 13 degrees C Water helps to maintain a cool sea surface temperature year-round, equivalent to a surface heat flux of about -6.0 W m(-2) averaged over the eastern tropical Pacific (15 degrees S-15 degrees N, 130 degrees W-eastern boundary) for the period of integration (1993-2006). During El Nino years, when the thermocline deepens as a consequence of the easterly wind weakening, the obduction of the 13 degrees C Water is suppressed, and the reduced vertical entrainment generates a warming anomaly of up to 10 W m(-2) in the eastern tropical Pacific and in particular along the coast of Peru, providing explanations for the warming of sea surface temperature that cannot be accounted for by local winds alone. The situation is reversed during La Nina years.

A quasi-synoptic interpretation of water mass distribution and circulation in the western North Pacific II: Circulation

Using the data of conductivity-temperature-depth (CTD) intensive observations conducted during Oct.-Nov. 2005, this study provides the first three-dimension quasi-synoptic description of the circulation in the western North Pacific. Several novel phenomena are revealed, especially in the deep ocean where earlier observations were very sparse. During the observations, the North Equatorial Current (NEC) splits at about 12A degrees N near the sea surface. This bifurcation shifts northward with depth, reaching about 20A degrees N at 1 000 m, and then remains nearly unchanged to as deep as 2 000 m. The Luzon Undercurrent (LUC), emerging below the Kuroshio from about 21A degrees N, intensifies southward, with its upper boundary surfacing around 12A degrees N. From there, part of the LUC separates from the coast, while the rest continues southward to join the Mindanao Current (MC). The MC extends to 2 000 m near the coast, and appears to be closely related to the subsurface cyclonic eddies which overlap low-salinity water from the North Pacific. The Mindanao Undercurrent (MUC), carrying waters from the South Pacific, shifts eastward upon approaching the Mindanao coast and eventually becomes part of the eastward undercurrent between 10A degrees N and 12A degrees N at 130A degrees E. In the upper 2 000 dbar, the total westward transport across 130A degrees E between 7.5A degrees N and 18A degrees N reaches 65.4 Sv (1 Sv = 10(-6) m(3)s(-1)), the northward transport across 18A degrees N from Luzon coast to 130A degrees E is up to 35.0 Sv, and the southward transport across 7.5A degrees N from Mindanao coast to 130A degrees E is 27.9 Sv.

A quasi-synoptic interpretation of water mass distribution and circulation in the western North Pacific: I. Water mass distribution

With high-resolution conductivity-temperature-depth (CTD) observations conducted in Oct.-Nov. 2005, this study provides a detailed quasi-synoptic description of the North Pacific Tropic Water (NPTW), North Pacific Intermediate Water (NPIW) and Antarctic Intermediate Water (AAIW) in the western North Pacific. Some novel features are found. NPTW enters the western ocean with highest-salinity core off shore at 15 degrees-18 degrees N, and then splits to flow northward and southward along the western boundary. Its salinity decreases and density increases outside the core region. NPIW spreads westward north of 15 degrees N with lowest salinity off shore at 21 degrees N, but mainly hugs the Mindanao coast south of 12 degrees N. It shoals and thins toward the south, with salinity increasing and density decreasing. AAIW extends to higher latitude off shore than that in shore, and it is traced as a salinity minimum to only 10 degrees N at 130 degrees E. Most of the South Pacific waters turn northeastward rather than directly flow northward upon reaching to the Mindanao coast, indicating the eastward shift of the Mindanao Undercurrent (MUC).

中国近海和西北太平洋温跃层时空变化分析、模拟及预报

温度跃层是反映海洋温度场的重要物理特性指标，对水下通讯、潜艇活动及渔业养殖、捕捞等有重要影响。本文利用中国科学院海洋研究所“中国海洋科学数据库”在中国近海及西北太平洋（110ºE-140ºE,10ºN-40ºN）的多年历史资料（1930-2002年，510143站次），基于一种改进的温跃层判定方法，分析了该海域温跃层特征量的时空分布状况。同时利用Princeton Ocean Model(POM)，对中国近海，特别是东南沿海的水文结构进行了模拟，研究了海洋水文环境对逆温跃层的影响。最后根据历史海温观测资料，利用EOF分解统计技术，提出了一种适于我国近海及毗邻海域，基于现场有限层实测海温数据，快速重构海洋水温垂直结构的统计预报方法，以达到对现场温跃层的快速估计。 历史资料分析结果表明，受太阳辐射和风应力的影响，20°N以北研究海域，温跃层季节变化明显，夏季温跃层最浅、最强，冬季相反，温跃层厚度的相位明显滞后于其他变量，其在春季最薄、秋季最厚。12月份到翌年3月份，渤、黄及东海西岸，呈无跃层结构，西北太平洋部分海域从1月到3月份，也基本无跃层结构。在黄海西和东岸以及台湾海峡附近的浅滩海域，由于风力搅拌和潮混合作用，温跃层出现概率常年较低。夏季，海水层化现象在近海陆架海域得到了加强，陆架海域温跃层强度季节性变化幅度(0.31°C/m)明显大于深水区(约0.05°C/m)，而前者温跃层深度和厚度的季节性变化幅度小于后者。20°N以南研究海域，温跃层季节变化不明显。逆温跃层主要出现在冬、春季节（10月-翌年5月）。受长江冲淡水和台湾暖流的影响，东南沿海区域逆温跃层持续时间最长，出现概率最大，而在山东半岛北及东沿岸、朝鲜半岛西及北岸，逆温跃层消长过程似乎和黄海暖流有关。多温跃层结构常年出现于北赤道流及对马暖流区。在黑潮入侵黄、东、南海的区域，多温跃层呈现明显不同的季节变化。在黄海中部，春季多温跃层发生概率高于夏季和秋季，在东海西部，多跃层主要出现在夏季，在南海北部，冬季和春季多温跃层发生概率大于夏季和秋季。这些变化可能主要受海表面温度变化和风力驱动的表层流的影响。 利用Princeton Ocean Model(POM)，对中国东南沿海逆温跃层结构进行了模拟，模拟结果显示，长江冲淡水的季节性变化以及夏季转向与实际结果符合较好，基本再现了渤、黄、东海海域主要的环流、温盐场以及逆温跃层的分布特征和季节变化。通过数值实验发现，若无长江、黄河淡水输入，则在整个研究海域基本无逆温跃层出现，因此陆源淡水可能是河口附近逆温跃层出现的基本因素之一。长江以及暖流（黑潮和台湾暖流）流量的增加，均可在不同程度上使逆温跃层出现概率及强度、深度和厚度增加，且暖流的影响更加明显。长江对东南沿海逆温跃层的出现，特别是秋季到冬季初期，有明显的影响，使长江口海域逆温跃层位置偏向东南。暖流对于中国东南沿海的逆温跃层结构，特别是初春时期，有较大影响，使长江口海域的逆温跃层位置向东北偏移。 通过对温跃层长期变化分析得出，黄海冷水团区域，夏季温跃层强度存在3.8年左右的年际变化及18.9年左右的年代际变化，此变化可能主要表现为对当年夏季和前冬东亚地区大气气温的热力响应。东海冷涡区域，夏季温跃层强度存在3.7年的年际变化，在El Nino年为正的强度异常，其可能主要受局地气旋式大气环流变异所影响。谱分析同时表明，该海域夏季温跃层强度还存在33.2年的年代际变化，上世纪70年代中期，温跃层强度由弱转强，而此变化可能与黑潮流量的年代际变化有关。 海洋水温垂直结构的统计预报结果显示，EOF分解的前四个主分量即能够解释原空间点温度距平总方差的95%以上，以海洋表层附近观测资料求解的特征系数推断温度垂直结构分布的结果最稳定。利用东海陆架区、南海深水区和台湾周边海域三个不同区域的实测CTD样本廓线资料，对重构模型的检验结果表明，重构与实测廓线的相关程度超过95%的置信水平。三个区重构与实测温度廓线值的平均误差分别为0.69℃，0.52℃，1.18℃，平均重构廓线误差小于平均气候偏差，统计模式可以很好的估算温度廓线垂直结构。东海陆架海区温度垂直重构廓线与CTD观测廓线获得的温跃层结果对比表明，重构温跃层上界、下界深度和强度的平均绝对误差分别为1.51m、1.36m和0.17℃/m，它们的平均相对误差分别为24.7%、8.9%和22.6%，虽然温跃层深度和强度的平均相对误差较大，但其绝对误差量值较小。而在南海海区，模型重构温跃层上界、下界和强度的平均绝对预报误差分别为4.1m、27.7m和0.007℃/m，它们的平均相对误差分别为16.1%、16.8%和9.5%，重构温跃层各特征值的平均相对误差都在20%以内。虽然南海区温跃层下界深度平均绝对预报误差较大，但相对于温跃层下界深度的空间尺度变化而言（平均温跃层下界深度为168m），平均相对误差仅为16.8%。因此说模型重构的温度廓线可以达到对我国陆架海域、深水区温跃层的较好估算。 基于对历史水文温度廓线观测资料的分析及自主温跃层统计预报模型，研制了实时可利用微机简单、快捷地进行温跃层估算及查询的可视化系统，这是迄今进行大范围海域温跃层统计与实时预报研究的较系统成果。

Organic geochemical studies of sinking particulate material in China sea area(I) - Organic matter fluxes and distributional features of hydrocarbon compounds and fatty acids

Sinking particulate material collected from Nansha Yongshu reef lagoon and the continental shelf of the East China Sea by sediment traps has been analyzed and studied for the first time using organic geochemical method. The results show that about half of the sinking particulate organic matter in the two study areas are consumed before reaching the depth of 5 m to the sea floor and the degree of this consumption in Yongshu reef lagoon is larger than that in the continental shelf of the East China Sea. The distributions of hydrocarbons and fatty acids indicate that the minor difference of biological sources of sinking particulate organic matter exists between Yongshu reel lagoon and the continental shelf of the East China Sea, but they mainly come from marine plankton. Stronger biological and biochemical transformations of sinking particulate organic matter are also observed and the intensity of this transformation in Yongshu reef lagoon is greater than that in the continental shelf of the East China Sea. It is found that the occurrence of C-25 highly branched isoprenoid (HBI) diene may be related to the composition of diatom species.