焊接工艺在线规划专家系统

本文研究开发了一个弧焊机器人焊接工艺专家系统．该系统实时性强、可靠性好，可以根据焊接初始条件制定合理的焊接工艺参数，实现焊接工艺的在线规划设计。

层状反倾向结构岩质边坡变形机理及稳定性研究

Toppling is a major failure model in anti-dip layered rock slopes. Because of the limited by testing means and experimental apparatus, present research on the deformation mechanism and stability analysis are mainly focus on the 2-Dimensional deformation, and the research really based on 3-Dimension is still limited. Therefore, based on the present research station, the article rely on the important hydroelectric project of typical anti-dip layered rock slopes -- The left bank slope of Long-tan hydropower-station in Guang Xi, China, and focused on the influencing factors, deformation mechanism and stability analysis of anti-dip layered rock slopes, three problems as follows are researched in this paper. (1) Deformation influencing factor analysis on ant-dip layered rock slopes Three influencing factors are included: geological factor, engineering factor and environmental factor. It is concluded that the toppling deformation of anti-dip layered rock slopes are more sensitive to geological and engineering factors, but less sensitive to environmental factor. In addition, the sensitivity of various factors to the rock toppling deformation is also arranged sequentially as follows: construction, gravitation, rainfall (underground water) and rock structure intensity, etc. (2) 3D deformation study on the anti-dip layered toppling rock slopes Used 3D Distinct Element Method (3DEC) analyzed the 3D deformation characteristic of anti-dip layered rock slops. It can be seen that the toppling characteristics are obvious when the inter-angle between slope direction and layer striking direction is under 20o, when the inter-angle is over 20o and equal or less than 40o，the toppling deformation characteristics decrease sharply with increase of inter-angle, when the inter-angle is over 40o , the slope deformation is not controlled by joints but influenced by other failure mode. Therefore, in order to quantify the toppling characteristics, a differential value of displacement vector angle between layered rock slope and block rock slope is proposed as a key index to distinguish failure model for anti-dip layered rock slopes, and it was applied to study the toppling of the rock slopes at Guangxi Long-tan hydropower station, China. The results indicated that the index was effective and instructive for analyzing the anti-dip layered rock slopes. (3) Stability analysis methods Because of the imperfection of some present slope analysis methods, based on slope failure mode and those three influencing factors, “slope stability entropy” method is defined in this paper, which makes good use of the sensitivity of relational matrix to influencing factors on slope stability and the qualification characteristics for information entropy to the irregularity of slope deformation. By this method, not only the randomness of geologic body on the base of dynamic analysis of slope failure mode is fully concerned, but also it makes the analysis time-saving and simple. Finally, the research findings were used to the engineering example successfully, and rational conclusion has been obtained.

叠前时间偏移: 基于波动方程的架构、发展和应用

This dissertation starts from the point that the prestack time migration can been considered as an approximation of the prestack depth migration, giving a wave equation based prestack time migration approach. The new approach includes: analytically getting the travel time and amplitude based on the one way wave equation and the stationary-phase theory, using ‘spread’ imaging method and imaging following the prestack depth migration, updating the velocity model with respect to the flats of the events in CRP gathers. Based on this approach, we present a scheme that can image land seismic data without field static correction. We may determine the correct near surface velocities and stack velocities by picking up the residual correction of the events in the CRP gathers. We may get the rational migration section based on the updated velocities and correct the migration section from a floating datum plane to a universal datum plane. We may adaptively determine the migration aperture according to the dips of the imaging structures. This not only speed up the processing, but may suppress the migration noise produce by the extra aperture. We adopt the deconvolution imaging condition of wave equation migration. It may partially compensate the geometric divergence. In this scheme, we use the table-driven technique which may enhance the computational efficiency. If the subsurface is much more complicated, it may be impossible to distinguish the DTS curve. To solve this problem, we proposed a technique to determine the appropriate range of the DTS curve. We synthesize DTS panel in this range using different velocities and depths, and stack the amplitude around the zero time. Determine the correct velocity and location of the considered grid point by comparing the values.

东南沿海火山碎屑岩40Ar/39Ar年代学研究

The Mesozoic pyroclastic rocks cover a vast coastal area in southeastern China, which is an important part of volcanic belt around Pacific Ocean. However, the previous dates for these rocks are confused and conflicted with each other, which have limited the further researches. It is difficult to date pyroclastic rocks, for almost all the dating methods, due to the multiple sources during their formation. Single crystal laser probe 40Ar/39Ar method is a powerful means to date pyroclastic rocks with complex sources. By distinguishing the xenocrysts and altered materials, Singe crystal total fusions of CO2 lasing on the sanidine separates could yield rational 40Ar/39Ar results and distinguish their sources. Timing on formations of the Moshishan Group, after avoiding the exotic and altered grains by lasing on the single sanidine separate, was reported in this study. 40Ar/39Ar incremental heating results of Cement part of the pyroclastic rocks show that the age spectrums are too complex to interpret for geological significance because of the alteration and 39Ar recoil. Incremental heating on K-feldspar separate from pyroclastic rocks give reliable data. Combining 40Ar/39Ar incremental heating ages and laser total fusion ages, we suggest the age was 125Ma-120Ma for Dashuang Fm, 120-119 Ma for Gaowu Fm, 119-114Ma for Xishantou Fm, 114-112Ma for Chawan Fm and 112-110Ma for Jiuliping Fm. The most intense period of volcanic activity in eastern Zhejiang Province was at about 120Ma. These new ages are much younger than the previous ones, suggesting that these thick volcanic formations had been formed in very short durations.

叠前地震多角度三参数同步反演方法

Pre-stack seismic inversion has become the emphasis and hotspot owing to the exploration & exploitation of oil field and the development of seismic technology. Pre-stack seismic inversion has the strongpoint of making the most of amplitude versus offset compared with the post-stack method. In this dissertation, the three parameters were discussed from multi-angle reflectance of P-wave data based on Zoeppritz’s and Aki & Richard’s equation, include P-wave velocity, S-wave velocity, and density. The three parameters are inversed synchronously from the pre-stack multi-angle P-wave data, based on rockphysics model and aimed at the least remnant difference between model simulation and practical data. In order to improve the stability of inversion and resolution to thin bed, several techniques were employed, such as the wavelet transform with multi-scale function, adding the Bayesian soft constraint and hard constraints (the horizon, structure and so on) to the inversion process. Being the result, the uncertainty of the resolution is reduced, the reliability and precision are improved, the significance of parameters becomes clearer. Meeting to the fundamental requirement of pre-stack inversion, some research in rockphysics are carried out which covered the simulation and inversion of S-wave velocity, the influence of pore fluids to geophysical parameters, and the slecting and analyzing of sensitive parameters. The difference between elastic wave equation modeling and Zoeppritz equation method is also compared. A series of key techniques of pre-stack seismic inversion and description were developed, such as attributes optimization, fluid factors, etc. All the techniques mentioned above are assembled to form a technique sets and process of synchronous pre-stack seismic inversion method of the three parameters based on rock physics and model simulation. The new method and technology were applied in many areas with various reservoirs, obtained both geological and economic significance, which proved to be valid and rational. This study will promote the pre-stack inversion technology and it’s application in hidden reservoirs exploration, face good prospects for development and application.

复杂裂隙岩体统计断裂本构关系与变形参数研究

Rock mass is widely recognized as a kind of geologic body which consists of rock blocks and discontinuities. The deformation and failure of rock mass is not only determined by rock block，but also by discontinuity which is virtually more important. Mutual cutting and combination of discontinuities controlled mechanical property of rock mass. The complex cutting of discontinuities determine the intense anisotropy on mechanical property of rock mass，especially under the effect of ground stress. Engineering practice has show that the brittle failure of hard rock always occurs when its working stress is far lower than the yield strength and compressive strength，the failure always directly related to the fracture propagation of discontinuities. Fracture propagation of discontinuities is the virtue of hard rock’s failure. We can research the rock mass discontinuous mechanical properties precisely by the methods of statistical analysis of discontinuities and Fracture Mechanics. According to Superposition Principle in Fracture Mechanics，A Problem or C Problem could be chosen to research. Problem A mainly calculates the crack-tip stress field and displacement field on internal discontinuities by numerical method. Problem C calculate the crack-tip stress field and displacement field under the assumption of that the mainly rock mass stress field has been known. So the Problem C avoid the complex mutual interference of stress fields of discontinuities，which is called crack system problem in Fracture Mechanics. To solve Problem C, field test on stress field in the rock mass is needed. The linear Superposition of discontinuities strain energies are Scientific and Rational. The difference of Fracture Mechanics between rock mass and other materials can mostly expression as：other materials Fracture Mechanics mostly face the problem A，and can’t avoid multi-crack puzzle, while the Rock mass Fracture Mechanics answer to the Problem C. Problem C can avoid multi-discontinuities mutual interference puzzle via the ground stress test. On the basis of Problem C, Fracture Mechanics could be used conveniently in rock mass. The rock mass statistics fracture constitutive relations, which introduced in this article, are based on the Problem C and the Discontinuity Strain Energy linear superposition. This constitutive relation has several merits: first, it is physical constitutive relation rather than empirical; second, it is very fit to describe the rock mass anisotropy properties; third, it elaborates the exogenous factors such as ground stress. The rock mass statistics fracture constitutive relation is the available approach to answer to the physical, anisotropic and ground stress impacted rock mass problems. This article stand on the foundation of predecessor’s statistics fractures constitutive relation, and improved the discontinuity distributive function. This article had derived the limitation of negative exponential distribution in the course of regression analysis, and advocated to using the two parameter negative exponential distribution for instead. In order to solve the problems of two-dimension stability on engineering key cross-sectional view in rock mass, this article derived the rock mass planar flexibility tensor, and established rock mass two-dimension penetrate statistics fracture constitutive relation on the basis of penetrate fracture mechanics. Based on the crack tip plasticity research production of penetrate fracture, for example the Irwin plasticity equifinality crack, this article established the way to deal with the discontinuity stress singularity and plastic yielding problem at discontinuity tip. The research on deformation parameters is always the high light region of rock mass mechanics field. After the dam foundation excavation of XiaoWan hydroelectric power station, dam foundation rock mass upgrowthed a great deal of unload cracks, rock mass mechanical property gotten intricacy and strong anisotropy. The dam foundation rock mass mostly upgrowthed three group discontinuities： the decantation discontinuity, the steep pitch discontinuity, and the schistosity plane. Most of the discontinuities have got partial unload looseness. In accordance with ground stress field data, the dam foundation stress field greatly non-uniform, which felled under the great impaction of tectonic stress field, self-weight stress field, excavation geometric boundary condition, and excavation, unload. The discontinuity complexity and stress field heterogeneity, created the rock mass mechanical property of dam foundation intricacy and levity. The research on the rock mass mechanics, if not take every respected influencing factor into consideration as best as we can, major errors likely to be created. This article calculated the rock mass elastic modulus that after Xiao Wan hydroelectric power station dam foundation gutter excavation finished. The calculation region covered possession monolith of Xiao Wan concrete double-curvature arch dam. Different monolith were adopted the penetrate fracture statistics constitutive relation or bury fracture statistics constitutive relation selectively. Statistics fracture constitutive relation is fit for the intensity anisotropy and heterogeneity rock mass of Xiao Wan hydroelectric power station dam foundation. This article had contrastive analysis the statistics fracture constitutive relation result with the inclined plane load test actual measurement elastic modulus and RMR method estimated elastic modulus, and find that the three methods elastic modulus have got greatly comparability. So, the statistics fracture constitutive relations are qualified for trust. Generally speaking，this article had finished following works based on predecessors job: “Argumentation the C Problems of superposition principle in Fracture Mechanics, establish two-dimension penetrate statistics fracture constitutive relation of rock mass, argue the negative exponential distribution limitation and improve it, improve of the three-dimension berry statistics fracture constitutive relation of rock mass, discontinuity-tip plastic zone isoeffect calculation, calculate the rock mass elastic modulus on two-dimension cross-sectional view”. The whole research clue of this article inherited from the “statistics rock mass mechanics” of Wu Faquan（1992）.

中国粮食生产的区域演进研究

Grain is one of the primary material conditions of the human survival and the grain production concerns the stability and development of the society directly. The regional patterns influence greatly on the grain production and the rational production distribution the regional comparative advantages and promotes grain production. This thesis starts with summarizing of the characteristics of changes and the overall trend of regional pattern of grain production of our country since 1949. Then it carries on network analyses to the factors, which influences the evolvement of regional grain production patterns of our country. And finally it gives some proposals to the grain production distribution in the future. The main content includes: Firstly, Reviewing the regional evolvement of grain production in our country, and analyzing the changes of the regional pattern of grain production of our country on the provincial scale and county scale separately, since 1949, especially since the reform and opening up policy. The main grain production areas are acting an important position in ensuring the national grain security, so this thesis analyses the main matter of the main grain production areas, forecasts the grain production situation in the future, and selects the Northeastern main grain production areas as the typical area to carry on the positive research. Secondly, this thesis analyzes the origin causes from two respects of natural and social economy of the regional evolvement pattern of grain production in China. Thirdly, based on the summarizing to the status of the regional pattern of the grain production, this thesis proposes the precept of the grain production distribution in the future in our country. Therefore, the areas of three major cereal crops, rice, wheat and corn, are confirmed on the basis of the comparative advantages. Finally, this thesis puts forward the security system of guaranteeing the grain production progressing steady in China. According to the above analysis, some conclusions have been achieved as follows: (1) The grain gross production gets on extricating itself from awkward position frequently while fluctuating greatly annually since 1949 in China. (2) Since the reform, its traditional regional pattern of grain production, the most of which was concentrated in the south area, has changed rapidly. China's center of gravity of grain production has shifted from the south to the north, and on the belts of latitude, the grain production has represented a trend of focusing to the middle area in China. (3) The main grain production areas play a very important role in ensuring China's food security. With their relative severe situation of the problems of agriculture, rural area and peasant, China has carried out a series of measures, which aim at improving the food-producing conditions of the main grain production areas, and enhancing the grain yields there. Under this condition, a forecast of the producing amount of the main grain production areas under the nation's self-supplying rate of over 95% shows that the increasing provision production in these areas can meet the demand of the country. (4) The natural and social economic factors influence together on the changes of the grain production regional pattern. Along with the state system transition and progress of agricultural science and technology, the regional pattern of grain production is affected heavier by the agricultural policy and technological elements. (5) The grain production will be concentrated to the middle province in the future, which economic development level being medium-sized; According to crop allocation, although the rice superiority production area located in the South, its comparative advantage index is little in some degree. Meanwhile, the wheat and corn superiority production areas are in the North mainly and its scale superiority and production level advantage are all comparatively obviously.

军队医学科技人员身心健康与影响因素的研究

To study the relationship between mental-physical health and coping behavior,job stress and job motivation in medical laboratory scientists and technicians. A cross-section survey was conducted,using the anxiety rating scale(SAS), depression rating scale(SDS), coping behavior rating scale,self-rating subhealth scale,self-rating stress scale,and self-rating job motivation scale among 289 medical laboratory scientists and technicians with analysis of ANOVA and Regression. The study was carried out in three steps:step1 is to analyze the general situation of the mental-physical health.Step 2 is to analyze the features of the main influencial facotors.Step 3 is to study the influence of the relative factors on mental-physical health.The following are the results: 1.The anxiety and depression scores of the medical researchers and technicians were 30±6 and 37±8 respectively,both significantly lower than those of the national norm（34±6 and 42±11 respectively,both P<0.01）,which are of significant difference. The depression score of the associate chief technician was 42±7, significantly higher than those of the medical researchers and technicians with any other professional titles (all P<0.05）, and the anxiety score of the associate chief technicians was 32±7, significantly higher than that of the research fellows（28±4, P<0.05），with no significant difference to the score of the medical researchers and technicians with other professional titles. The depression score,anxiety score and the subhealth score of the age group of 36～49 were 39±9,31±7 and 32±9 respectively, both higher than that of the age group of 20～35 （36±8,29±6 and 29±7 respectively,both P<0.05）,while there is much diference among other age groups. And the subhealth status has nothing to do with marital status,education background and professional titles. 2.The coping behaviors,job stress and motivation of the military medical laboratory scientists and technicians. 1）Coping behaviors:The seeking help score of the associate chief technicians was 2.8±0.5,not significantly different from that of the associate research fellows（2.8±0.5）,but significantly lower than those of the medical researchers and technicians with other professional titles(all P<0.01),and whose self-blame score was higher than that of the research fellows,which is of significant difference.The self-blame score and the imagination score of the associate research fellows were 2.0±0.5 and 2.4±0.5 respectively, significantly higher than that of the research fellows(1.6±0.4, 2.1±0.4,both P<0.01). The seeking help score of the females was 3.1±0.5, significantly higher than that of the males(2.9±0.5, both P<0.01),and the solving problem score was 3.4±0.6,significantly lower than the male(3.6±0.7, both P<0.01).There is no any significant difference in coping behaviors among researchers and technicians of different marital status,education background and age groups. 2)Job stress: The score of job stress of the age group of 35~49 and 50~60 were 23±8 and 25±6 respectively,significantly higher than that of the 20~35(21±7,both P<0.05). There is no any significant difference in job stress among researchers and technicians of different marital status,gender,professional titles and education background. 3)The score of meeting personal desire for reputation and interests of the males was 19.6±5.4，significantly higher than that of the females(18.4±5.0, both P<0.05), while there is no significant difference in job motivation among researchers and technicians of different titles,education,age and marital status. 3.The relationship of the mental-physical health of the military medical laboratory scientists and technicians with their coping behaviors,job stress and motivations 1) Coping behaviors:Regression analysis showed that, the best predictors of subhealth were anxiety,depression and escaping (β=-0.40,β=0.23, β=0.14, both P<0.01).the best predictors of anxiety and depression were active coping behaviors and negative coping behaviors (β=-0.40,β=0.40, both P<0.01).The moderate(rational) coping behaviors is the best predictor only of anxiety and of significant difference. 2)job stress : Regression analysis demonstrated that anxiety,depression,job stress 2 and job stress 4 are the best predictor for subhealth;job stress 12 is the best retro-predictor for depression; job stress 3 and 8 are the best predictor for depression;and job stress 2 and 9 are the best predictor for anxiety ,which are of significant difference. 3)Motivation:Regression analysis demonstrated that depression is the best predictor for subhealth while motivation itself doesn't predict subhealth;with respect to the specific contents of motivation,"probing unknown rules and making contributions to the human society "is the best retro-predictor for depression and has nothing to do with anxiety prediction. 4) The combined influences of coping behaviors,job stress and motivations: Regression analysis showed that, the best predictors for subhealth were anxiety,depression and job stress(β=0.41,β=0.24, β=0.19, both P<0.01).the best predictors for anxiety and depression were active coping behaviors and negative coping behaviors (β=-0.40,β=0.40, both P<0.01).The moderate(rational) coping behaviors is the best predictor only for anxiety and of significant difference. CONCLUSIONS: Regression analysis showed that the best predictors for anxiety and depression were active coping behaviors and negative coping behaviors, the best predictors for subhealth were anxiety,depression and job stress.Coping behaviors, job stress and motivations have significant influences on the mental-physical health of the military medical researchers and and technicians. Among them,coping behavior is the most important factor while job stress and motivation follow. Seeking help more often,less self-blame ,imagination and job stress could help release the anxiety, depression and improve the subhealth of the medical researchers and technicians. The findings of this study indicate we should address the physical and mental health of the military laboratory researchers and technicians.

中学生自我状态现状及其与亲子沟通、心理健康的关系研究

The communication between parents and children is one of the focuses in adolescence research area. However，the ego states in communication were seldom referred to. In present research, the relationship among high school students’ ego states, parent-child communication status and mental health level was explored. Study1: Ego State Questionnaire (ESQ) was revised according to 400 high school students from both rural and urban areas. Study2: Revised Ego State Questionnaire was administered to 450 high school students. Data was analyzed by cluster analysis. Study3: The relationship among ego states, parent-child communication status and mental health level was researched systematically according to 450 high school students. The main results of the thesis were as follows: 1) The five factors of Johu Dusy’s ego states were confirmed. 2) The revised RESQ had good reliability and validity, and could be used in researching middle school students ego states and related area. 3) Gender differences: Girls’ NP score was higher than boys’. Boys’ Adult and AC score was higher than girls. 4)School difference: students’ A and FC from key high school scored higher than students form normal high school. 5) The students were divided into two groups according to parental education level. The split point was high school. Students whose parents’ education level was above high school scored higher in NP than the other group of students. 6) The students were clustered into 4 groups according to cluster analysis: adapted、rational、contradictory、self-centered。 7) adapted、self-centered students’SCL-90 score was lower than average level, contradictory students’ score was higher than average level, rational students’score was equal to average level. 8) Both NP and Adult ego states had significant negative correlation with SCL total score, CP ego states had significant postive correlation SCL total score. 9) NP, A ego states had significant postive correlation with family communication atmosphere, father-son, father-daughter, mother-son, mother-daughter communication status . CP had significant negative correlation with above variables. AC had significant negative correlation with family communication atmosphere . 10) The stepwise regression showed that Adult ，Control Parent ego states and communication between parents and children score had prevented from mental health significantly. Adult ego states impacted mental health through communication between parents and children.

道德强度对企业道德决策的影响及作用机制

Moral decision-making in business means the decisions involved in moral issues in business context. Moral intensity is a construct that captures the extent of issue-related moral imperative in a situation, which is one of the most important factors in the study of moral decision-making in business. Based on Issue-Contingent Model, the present study investigated the influence of moral intensity on moral decision-making in business (including moral recognition, moral judgment, and moral intent in the present study), and further focused on exploring the mechanism of moral intensity in moral decision-making in business. Recently, the studies in decision-making gave more emphasis to the role of emotions. The present study tried to include empathy into moral decision-making in business to explore the role of empathy in the relationship between moral intensity and moral decision-making in business, which would enrich and extend Issue-Contingent Model. The present study would also make up for a deficiency in the study of moral decision-making in business that overemphasized the rational reasoning and neglected the role of emotions. There were three parts in the present study. Firstly, study 1 replicated the former study and explored the relationship between perceived moral intensity and moral decision-making in business in China by questionnaire method. Secondly, study 2 focused on exploring the influence of the components of moral intensity on moral decision-making in business and empathic response by experimental method. Finally, study 3 explored the role of empathy in the relationship between moral intensity and moral decision-making in business. The results indicated that, 1.Perceived moral intensity was the significant predictor for moral decision- making in business. 2.Magnitude of consequence, social consensus, and probability of effect had significant effects on moral decision-making in business. Magnitude of consequence and probability of effect could influence empathic response significantly. 3.Empathic response played the role of mediator between moral intensity and moral decision-making in business. Empathic response completely mediated the relationship between moral intensity and moral recognition. Empathic response partly mediated the relationship between moral intensity and moral judgment, moral intent. Further analysis indicated that probability of effect and magnitude of consequence relied more on empathic response than social consensus to influence moral judgment and moral intent. Dispositional empathy could influence moral decision-making in business through perceived moral intensity and empathic response. 4.Controlled empathic levels could influence moral decision-making in business significantly. Empathic levels influenced the effect of probability of effect on moral decision-making in business, and did not influence the effect of magnitude of consequence and social consensus on moral decision-making in business. These findings not only contribute to enrich the models of moral decision- making in business, but also have significant practical applications in the training of moral decision-making in business.

中学生问题解决中操作要求对资源分配的影响

Schema acquisition is one of the mechanisms of learning. How to design reasonable teaching material to promote schema acquisition is an important question that psychological researchers and educators both interested. Cognitive Load Theory indicates that: The cognitive resource of Human is limited, the organization and presentation of the learning material should avoid demanding the learner consume resource in actions that have nothing to do with schema acquisition. How can we do that? Sweller. J. et think: Increasing the operation cost of the learning material would make the students put more resource into the implementation of the operation, this kind of resource consuming has nothing to do with schema acquisition. So, in order to make the students put more resource into actions which relating to schema acquisition, we should decrease the operation cost of the learning material. But, the research results of O'Hara et indicate: In problem-solving of knowledge lean field, increasing the operation cost would make the college students invent more resource to plan and understanding actions. So, Increasing the operation cost would facilitate the schema acquisition. How operation cost will effect the Middle-School Students' (MSS) schema acquisition and resource distribution when they solve problems of knowledge lean/rich field? This is the main question this research want to make inquiry. IN this research, we use three experiments indicate: Increasing the operation cost of actions, the implementing action would be less and the planning action would be more. So, increasing the operation cost can promote the schema acquisition. We use "cost-benefit analysis" strategy to explain this result. This strategy means that: Human is rational, before doing one action, he will weigh the cost and the coming benefit of this action, if the coming benefit is higher than the cost, he will implement this action; if the cost is higher than the coming benefit, this action will be contained. On the one hand, this research further affirms the core opinion of the Cognitive Load Theory: Human's cognitive resource is limited, we should put the limited resource into actions which is related to the schema acquisition; On the other hand, for the learning material designing principle which is advanced by the Cognitive Load Theory, we raise our questions. Besides, the question we raised holds some identical views with the constructive learning opinion: Learning is not passive information absorption, but positively constructing the meaning of the information, besides, this kind of construction can't done by others. The result of this research can provide some theory guidance and experimental basis for the designing of the MSS's science teaching material from a complete new angle.