12C6+束和Mitomycin C 诱导的DNA损伤效应

本文旨在分别研究重离子束及MMC在诱导细胞的DNA损伤效应中一些具体的分子机制，为治疗的进行以及相关辅助药物的开发提供理论依据。本文探索的重点有两个，第一个是重离子束辐射诱导的DNA损伤效应及p53在其中的激活，第二个是MMC诱导的DNA损伤效应及p53和BRCA1、H2AX等分子在其中的角色。 1. 12C6+离子束诱导HeLa细胞DNA损伤效应为了研究HeLa细胞经过12C6+ 束辐照之后的DNA损伤效应，及这个过程中p53激活的分子机制。我们运用中性单细胞电泳技术，检测了HeLa细胞经过4Gy 12C6+ 束辐照0h、3h、6h和12h之后DNA的损伤情况，以及0.5Gy、1Gy、2Gy和4Gy 12C6+ 束辐照0h后的DNA损伤情况。同时运用细胞生长实时监测仪监测了HeLa细胞在经过0Gy、0.5Gy和1Gy 12C6+ 束辐照之后的生长变化，并运用AO/EB双染检测了辐照24小时后的凋亡情况。另外，利用8mmol/L的caffeine（抑制ATM和ATR）和20μmol/L的wortmannin（抑制ATM和DNA-PK）处理HeLa细胞后再进行1Gy 12C6+ 束辐照，通过western blot检测p53的表达。结果显示，12C6+ 束辐照可造成HeLa细胞的DNA损伤，损伤随剂量升高而升高但随时间降低；并诱导HeLa细胞发生凋亡；而且辐照后p53表达升高，但经过caffeine或者wortmannin预先处理的细胞p53均没有显著升高。我们的结论是：12C6+ 束辐照可造成HeLa细胞的DNA损伤并诱导损伤修复及凋亡等效应，损伤效应相关的分子p53被激活，并且激活依赖于ATM。 2. MMC诱导的DNA损伤效应在这一部分研究中，首先，我们利用与上面相同的研究方法，探讨了p53在MMC诱导的DNA损伤效应中的激活情况，结果显示，MMC诱导的DNA损伤效应并不依赖于p53。另外，我们还探讨了， BRCA1在FANCD2的γ-H2AX依赖性转移中的作用。MMC可造成DNA的ICL（interstrand cross-link）损伤，ICL可通过FA(Fanconi Anemia)通路进行修复。FANCD2是FA通路的核心分子，在DNA产生ICL时被各种分子修饰然后转移到损伤部分，这个过程的涉及到ATR、γ-H2AX及BRCA1等，本文试图探讨BRCA1在其中的作用方式。研究中，我们监测了不同处理（包括对照、caffeine（可抑制ATR）、MMC及MMC ＋caffeine）的HCC1937(BRCA1缺陷型)和MCF7（BRCA1野生型）细胞的生长；并用Western blot检测MMC处理之后HCC1937细胞γ-H2AX的表达情况。结果表明，MMC和caffeine均可以抑制HCC1937的生长，但caffeine和MMC+caffeine的抑制效果是一样的；MMC和caffeine均可以抑制MCF7的生长，且MMC+caffeine处理比仅进行caffeine处理的抑制作用强；MMC处理之后，HCC1937的γ-H2AX表达显著升高。我们的结论是，在FANCD2的γ-H2AX依赖性转移中，H2AX的磷酸化并不依赖于BRCA1，不过，BRCA1和ATR应该参与一个相同的分子事件，可能是FANCD2的磷酸化。这个有待进一步的实验验证

长期施肥对作物产量的贡献

以中国科学院沈阳生态试验站16年定位试验为平台,研究了8种施肥制度的增产效应与稳产性能。结果表明:不同施肥处理对作物产量有明显影响,作物平均产量NPK>NP>NK>N>PK>P>K>CK,不施N肥时(即P、K、PK等处理)作物产量低;肥料对作物产量的年际贡献率在N、NP、NK、NPK处理中总体呈上升趋势,而在P、K、PK处理中则表现出下降的趋势;从化肥N、P、K的增产效果上看,总趋势是N>P>K;作物年际间产量的变异系数随化肥的均衡施用呈下降的趋势;玉米在NPK处理时的稳产性能最好,大豆在PK处理的稳产性最好。

东北草甸棕壤的零电荷点和界面酸-碱反应特征平衡常数

分别采用电势滴定(Potentiometric titration)法,质量滴定(Mass titration)法和惰性电解质滴定(Inert electrolyte titra-tion)法测定了荷结构负电荷的东北草甸棕壤的零净电荷点(PZNC),研究表明荷结构负电荷的土壤依然存在与电解质浓度无关的零净电荷点,三种方法的实验结果分别为2.9,5.0和3.3.相比较而言,电势滴定法和惰性电解质滴定法的结果相近,而质量滴定法的结果偏高.对文献中推算表面质子活性位密度(Ns)的方法进行了改进,得到东北草甸棕壤样品的Ns为2.5 mmol·g-1.根据实验测定的pHPZNC,Ns和结构电荷密度(σst)值直接计算得出东北草甸棕壤样品的界面反应特征平衡常数即1-pK模型中的pK,2-pK模型中pKain1t和pKain2t,分别为3.37,2.42和4.32,与文献报道的沉积物和蒙脱土的值相吻合.

Phase Behavior and dewetting for polymer blend films studied by in situ AFM and XPS: From thin to ultrathin films

In this work, the film thickness (l(0)) effect on the phase and dewetting behaviors of the blend film of poly(methyl methacrylate)/poly (styrene-ran-acrylonitrile) (PMMA/SAN) has been studied by in situ atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The thinner film shows the more compatibility of the blend, and the phase separation of the film occurs at l(0) > 5R(g) (radius of gyration). An initially time-independent q*, the characteristic wavenumber of the phase image, which is in good agreement of Cahn's linearized theory for the early stage of spinodal decomposition, has been obtained in real space and discussed in detail. For 5R(g) > l(0) > 3R(g), a "pseudo-dewetting/(phase separation + wetting)" behavior occurs, where the pseudo-wetting is driven by the concentration fluctuation mechanism. For 10 < 3R(g), a "real dewetting/(phase separation + wetting)" behavior occurs.

Rim instability by solvent-induced dewetting

We study the condition of the occurrence of the rim instability in the solvent-induced dewetting process. Our experimental results show that the film thickness not only greatly influences the occurrence of the rim instability, but also influences the wavelength lambda as characterized by the undulation of the deformed contact line. The molecular weight of polymer does not almost influence the occurrence of the rim instability and the wavelength lambda. The wavelength lambda is proportional to the width of the rim in the rim instability region. The receding contact angle theta of polymer solutions on substrates in the dewetting process is an important factor to influence the rim instability in the solvent-induced dewetting.

Synthesis of a (sic)-shaped amphiphilic block copolymer by the combination of atom transfer radical polymerization and living anionic polymerization

The functionalization of monomer units in the form of macroinitiators in an orthogonal fashion yields more predictable macromolecular architectures and complex polymers. Therefore, a new there exists E-shaped amphiphilic block copolymer, (PMMA)(2)-PEO-(PS)(2)-PEO-(PMMA)(2) [where PMMA is poly(methyl methacrylate), PEO is poly (ethylene oxide), and PS is polystyrene], has been designed and successfully synthesized by the combination of atom transfer radical polymerization (ATRP) and living anionic polymerization. The synthesis of meso-2,3-dibromosuccinic acid acetate/diethylene glycol was used to initiate the polymerization of styrene via ATRP to yield linear (HO)(2)-PS2 with two active hydroxyl groups by living anionic polymerization via diphenylmethylpotassium to initiate the polymerization of ethylene oxide. Afterwards, the synthesized miktoarm-4 amphiphilic block copolymer, (HO-PEO)(2)-PS2, was esterified with 2,2-dichloroacetyl chloride to form a macroinitiator that initiated the polymerization of methyl methacrylate via ATRP to prepare the there exists E-shaped amphiphilic block copolymer.

pH-dependent conformational changes of ferricytochrome c induced by electrode surface microstructure

pH-dependent processes of bovine heart ferricytochrome c have been investigated by electronic absorption and circular dichroism (CD) spectra at functionalized single-wall carbon 'nanotubes (SWNTs) modified glass carbon electrode (SWNTs/ GCE) using a long optical path thin layer cell. These methods enabled the pH-dependent conformational changes arising from the heme structure change to be monitored. The spectra obtained at functionalized SWNTs/GCE reflect electrode surface microstructure-dependent changes for pH-induced protein conformation, pK(a) of alkaline transition and structural microenvironment of the ferricytochrome c heme. pH-dependent conformational distribution curves of ferricytochrome c obtained by analysis of in situ CD spectra using singular value decomposition least square (SVDLS) method show that the functionalized SWNTs can retain native conformational stability of ferricytochrome c during alkaline transition.

Copper hexacyanoferrate multilayer films on glassy carbon electrode modified with 4-aminobenzoic acid in aqueous solution

4-Aminobenzoic acid (4-ABA) was covalently grafted on a glassy carbon electrode (GCE) by amine cation radical formation during the electrooxidation process in 0.1 M KCl aqueous Solution. X-ray photoelectron spectroscopy (XPS) measurement proves the presence of 4-carboxylphenylamine on the GCE. Electron transfer processes of Fe(CN)(6)(3-) in solutions of various pHs at the modified electrode are studied by both cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Changing the solution pH would result in the variation of the terminal group's charge state, based on which the surface pK(a) values were estimated. The copper hexacyanoferrate (CuHCF) multilayer films were formed on 4-ABA/GCE prepared in aqueous solution, and which exhibit good electrochemical behavior with high stability.

Preparation and characterization of post-derivatives from functional polystyrene (ATRP) with p-nitroaniline-azomethine phenol and their thermal and optical study

The functional polystyrene, (Cl-PS)(2)-CHCOOCH2CH2OH ( designated as XPSt and coded P2) was prepared by ATRP at 130(0)C using CuCl and bipyridine as catalysts, 2,2-dichloro acetate-ethylene glycol (DCAG) as multifunctional initiator and THF as solvent. 4-Nitoroaniline azomethine-4' phenol (P1) as chromophores were covalently linked to the functional end groups of the polymer by using simple displacement reaction. The functional polystyrenes, namely XPSt (P2) and (PS)(2)-CHCOOCH2CH2OH, designated as X-PSt and coded P3 and their post-derivatives, namely, DXPSt (P4) and DX-PSt (P5) respectively were characterized by IR, NMR and UV spectroscopies, gel permeation chromatography (GPC) and thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), polarising optical microscopy (POM) and XRD studies. DSC showed that incorporation of chromophores in the side chains of polymers towards the polystyrene moiety increases the rigidity of the polymer and subsequently, its glass transition temperature; however the incorporation of side chain towards the alcoholic functional group decreases the glass transition temperature. The post derivatives do not play any significant role to increase the thermal stability ( TGA).

Extraction mechanism of rare earths with sec-octylphenoxy acetic acid by two-phase titration technique

The compositions of the extracted complexes of La, Gd, Er and Y with sec-octyl-phenoxy acetic acid in heptane and the related apparent extraction equilibrium constants K-M were determined using two-phase titration technique. The stoichiometric compounds for La, Gd, Er and Y should be LaA(3) . 2.5HA, GdA(3) . 3HA, ErA(3) . 3.1HA and YA(3) . 4.3HA respectively. And their pK(M) are 3.43, 3.46, 3.08 and 2.58 respectively.

Determination of the interfacial acidity of the functional alkanethiols self-assembly membrane by capacitance measurement

The acid-base equilibrium of self-assembly monolayer(SAM) of mercaptopropionic acid on gold electrode was studied by capacitance titration. The change of capacitance was due to protonation and deprotonation of the modified electrode surface. This method can be used to measure pH value in solution and capacitance of solid/liquid on SAMs surface synchronously. The shift of pK(a) was observed during the experiment as previous reports. The factors that affect the capacitance measurement were discussed in detail.

Study on surface acid-base property of carboxylic acid-terminated self-assembled monolayers by cyclic voltammetry and electrochemical impedance spectroscopy

Cyclic voltammetry and electrochemical impedance spectroscopy were used to study the surface acid-base property of carboxylic acid-terminated self-assembled monolayers (SAMs). A carboxylic acid-terminated thiol, such as thioctic acid (1,2-dithiolane-3-pentanoic add), was self-assembled on gold electrodes. Electron transfer between the bulk solution and the SAM modified electrode was studied at different pH using Fe(CN)(6)(3-) as a probe. The surface pK(a) of thioctic acid was determined by cyclic voltammetry and electrochemical impedance spectroscopy to be 5.6 +/- 0.1 and 5.8 +/- 0.1, respectively. The method is compared with other methods of monolayer pK(a) measurement.

Covalent modification of a glassy carbon surface by 4-aminobenzoic acid and its application in fabrication of a polyoxometalates-consisting monolayer and multilayer films

4-Aminobenzoic acid (4-ABA) was covalently grafted on a glassy carbon electrode (GCE) by amine cation radical formation in the electrooxidation process of the amino-containing compound. X-ray photoelectron spectroscopy measurement proves the presence of 4-carboxylphenylamine monolayer on the GCE. The redox responses of various electroactive probes were investigated on the 4-ABA-modified GCE. Electron transfer to Fe(CN)(6)(3-) in solutions of various pHs was studied by both cyclic voltammetry and electrochemical impedance analysis on the modified electrode. Changes in the solution pH value result in the variation of the terminal group charge state, based on which surface pK(a) values are estimated. The 4-ABA-modified GCE was used as a suitable charged substrate to fabricate polyoxometalates-consisting (POM-consisting) monolayer and multilayer films through layer-by-layer assembly based on electrostatic attraction. Cyclic voltammetry shows the uniform growth of these three-dimensional multilayer films. Taking K10H3[Pr-(SiMo7W4O39)(2)]. H2O (abbreviated as Pr(SiMo7W4)(2)), for example, the preparation and electrochemical behavior of its monolayer and multilayer film had been investigated in detail. This modification strategy is proven to be a general one suitable for anchoring many kinds of POMs on the 4-ABA-modified GCE.

Investigation of the model compounds at 4-aminobenzoic acid modified glassy carbon electrode by scanning electrochemical microscopy

In this paper, we studied the reactions of both potassium ferricyanide and hexaammineruthenium(III) chloride at a 4-aminobenzoic acid (4-ABA) modified glassy carbon electrode (GCE) by scanning electrochemical microscopy (SECM) in different pH solutions. The surface of the modified electrode has carboxyl groups, the dissociation of which are strongly dependent upon the solution pH values. The rate constant kb of the oxidation of ferrocyanide on the modified electrode can be obtained by fitting the experimental tip current-distance (I-T-d) curves with the theoretical values. The surface pK(a) of the 4-ABA modified GCE was estimated from the plot of standard rate constant k(o) versus the solution pH and is equal to 3.2, which is in good agreement with the reported result. The SECM approach curves for Ru(NH3)(6)(3+) both on the bare and the modified electrodes show similar diffusion control processes. These results can be explained by the electrostatic interactions between the modified electrode surface and the model compounds with different charges. (C) 2001 Elsevier Science BN. All rights reserved.

二(2,4,4-三甲基戊基)膦酸萃取稀土离子

2-乙基己基膦酸单2-乙基己基酯(HEH/EHP)是目前稀土湿法冶金工业中应用最广泛的萃取剂。但存在重稀土离子反萃取酸度高,某些中、重稀土离子对的分离系数小、选择性不高等缺点。所以研究优于HEH/EHP的新萃取体系已引起人们极大的关注。近年来发现,二(2,4,4-三甲基戊基)膦酸(HBTMPP,HL)有可能是萃取稀土元素的有效萃取剂。由于其分子中不含酯氧原子,使得它的pK。值比HEH/EHP高。因此,用HBTMPP萃取稀土及其它高价