Spatial interference effect of two-photon in femtosecond-pulse pumped spontaneous parametric down-conversion

We have used the transverse correlated properties of the entangled photon pairs generated in the process of spontaneous parametric down-conversion, which is pumped by a femtosecond pulse laser, to perform Young's interference experiment. Unlike the case of a continuous wave laser pump, a broadband pulse laser pump can submerge an interference pattern. In order to obtain a high visibility interference pattern, we used a lens with a tunable focal length and two interference filters to eliminate the effects of the broadband pump laser. It is proven that the process of two-photon direct interference is a post-selection process.

Tunable parametric fluorescence using a single crystal

In this paper, we investigate the mechanism of tunable parametric superfluorescence (PS) based on the second harmonic generation and parametric processes taking place in the same nonlinear crystal (BBO). The tunable spectra of PS has been generated between 480 nm and 530 nm, which is pumped by the second-harmonic from the high-power Ti: sapphire laser system at 1 kHz repetition rate. We present the generation mechanism of PS theoretically and simulate the process of PS ring using the amplification transfer function. The experiment and the theory show that PS will appear when the phase matching angle for second-harmonic generation is close to the optimal pump angle for optical parametric generation, and then the tunable spectra of PS are generated by slightly adjusting the crystal angle. The result provides a theoretical basis for controlling the generation of PS and quantum entanglement states, which is of great significance for the development of quantum imaging, quantum communications and other applieations.

恒河猴TRIM5α 的组织分布及TRIMCyp 限制HIV-1 病毒颗粒产生的初步研究

三重基序蛋白TRIM5α(Tripartite motif protein 5 alpha)是哺乳动物细胞中一种重要的限制因子，广泛分布于各种哺乳动物细胞中。人类TRIM5α mRNA 广泛表达于人类各个组织中，并且I 型干扰素IFN-α/β/γ 均能与TRIM5α 基因启动子的ISRE 元件结合，上调TRIM5α mRNA 的表达。恒河猴(Macaca mulatta)TRIM5α 是恒河猴体内重要的限制因子。目前对恒河猴尤其是中国恒河猴TRIM5α 的组织分布以及在受到外界刺激时TRIM5α mRNA 表达量的变化研究还未见报道。本论文通过从中国恒河猴各组织中提取总RNA，以β-actin 基因作为内参照，通过逆转录PCR 检测各组织中TRIM5α mRNA 的表达。我们选择用HIV-GFP-VSVG 感染、用佛波脂(Phorbol myfismte acetate, PMA)+离子霉素(Ionomycin, Ion)，CD28 抗体+CD49d 抗体分别共刺激恒河猴PBMC，研究不同刺激对中国恒河猴TRIM5α mRNA 表达量的影响。研究发现：TRIM5α mRNA 广泛表达于恒河猴各组织中，在免疫系统和泌尿生殖系统各组织，如腹淋巴结、睾丸和附睾中表达量最高，而在神经系统各组织如大脑、脊髓中表达量比较少，在其他各组织中未见明显的表达差异。此外HIV-GFP-VSVG 感染、PMA+ Ion 与CD28 抗体+CD49d 抗体分别共刺激PBMC 均能促进PBMC TRIM5α mRNA 表达量的上调。 TRIM5α 作为恒河猴体内的最主要的限制HIV-1 感染的限制因子，除了可能通过促进HIV-1 的脱壳和阻止整合前复合物PIC(pre-integration complex)入核，恒河猴TRIM5α 还能限制HIV-1 病毒颗粒的产生。在这个过程中B30.2 结构域是非必需的，而B-box2 和Coiled-Coil 结构域起着决定性的作用。因为鹰猴(Aotes trivirgatus)TRIMCyp(omTRIMCyp) 蛋白和北平顶猴(Macaca leouina) TRIMCyp(npmTRIMCyp）蛋白的B-box2 和Coiled-Coil 结构域与恒河猴TRIM5α 的B-box2 和Coiled-Coil 具有很高的同源性，我们希望了解鹰猴TRIMCyp 蛋白和北平顶猴TRIMCyp 蛋白对HIV-1 病毒颗粒的产生是否有限制作用。本论文主要通过将质粒pNL4.3 分别与质粒pLPCX 、pLPCX-npmTRIMCyp-HA 、 pLPCX-omTRIMCyp-HA和pLPCX-rhTRIM5α-HA共转染293T细胞，通过western blot 检测细胞内Gag 蛋白和TRIM5 蛋白的表达情况，研究omTRIMCyp 蛋白和 npmTRIMCyp 蛋白对HIV-1 病毒颗粒产生的限制作用。结果表明：北平顶猴 TRIMCyp 蛋白、鹰猴TRIMCyp 蛋白都能不同程度的促进HIV-1 病毒Gag 蛋白的降解。

TRIM5-CypA融合基因与北平顶猴易感HIV-1的机制研究

天然免疫分子TRIM5α（tripartite motif protein 5α）是近年来发现的一种重要的宿主细胞内逆转录病毒限制因子。在灵长类动物细胞中，TRIM5α蛋白可以在病毒进入细胞后、逆转录前的阶段抑制HIV-1、N-MLV和EIAV等逆转录病毒的复制。由于TRIM5α分子的作用，绝大部分旧大陆猴（Old World monkey）都不能感染HIV-1。而在新大陆猴（New World monkey）中，鹰猴是唯一不感染HIV-1的灵长类动物。研究证明，鹰猴细胞中存在的TRIM5-CypA融合蛋白（owl monkey TRIM5-CypA，omTRIMCyp）介导了抗HIV-1的作用，从而使鹰猴不能感染HIV-1。研究证明，平顶猴是旧大陆猴中唯一报道可以感染HIV-1的灵长类动物，但是其感染HIV-1的机制并不清楚。根据现行的灵长类动物分类学，原属平顶猴群体（M. nemestrina group）的三个亚种分为猕猴属的三个不同种：巽他平顶猴（Sunda pig-tailed macaque，M. nemestrina），北平顶猴（Northern pig-tailed macaque，M. leonina）和明打威猴（Mentawai macaque，M. pagensis）。本论文对中国云南境内北平顶猴TRIM5基因座和感染HIV-1的相关性进行了研究。通过PCR和测序对北平顶猴基因组TRIM5基因座进行分析，发现一个CypA假基因的cDNA通过逆转座机制插入至TRIM5基因座的3’-UTR区域，形成了一个不同于鹰猴TRIM5-CypA的新型融合基因npmTRIMCyp（northern pig-tailed macaque TRIM5-CypA）。通过RT-PCR对npmTRIMCyp融合基因的转录本进行分析，我们鉴定出npmTRIMCyp共有3种不同的选择性剪接产物，分别为npmTRIMCypV1-V3。进一步克隆和测序这3种不同选择性剪接体，通过丰度和序列分析证实：npmTRIMCypV2是优势剪接体，可能在该融合基因产物的功能中发挥作用。研究发现北平顶猴npmTRIMCyp融合基因主要转录本中外显子7和8均被剪切掉。外显子7剪接丢失机制源于TRIM5第6内含子内 3’剪接位点的G/T突变。我们克隆了npmTRIMCyp融合基因cDNA的蛋白编码区ORF，并构建了重组表达npmTRIMCyp的载体，转染HeLa和HeLa-T4细胞并获得稳定表达的细胞株。通过感染HIV-1证实，npmTRIMCyp融合蛋白不能够限制HIV-1的感染和复制，这可能是北平顶猴作为旧大陆猴中唯一对HIV-1易感的灵长类动物的重要分子机制之一。通过HIV-1感染灵长类动物PBMCs实验证实，北平顶猴可以感染HIV-1。npmTRIMCyp可以有效地限制HIV-2ROD的复制，但对SIVmac239只有十分微弱的限制活性。通过构建鹰猴omTRIMCyp和北平顶猴npmTRIMCyp的置换剪接体（SWAP-1和SWAP-2），转染融合基因及其置换剪接体的CRFK细胞激光共聚焦实验证明，npmTRIMCyp、SWAP1和SWAP2在细胞内主要存在于胞浆中。稳定表达融合蛋白和置换剪接体的CRFK细胞感染HIV-1-GFP-VSVG分析表明，含omTRIMCyp外显子7的SWAP-1和SWAP-2均具有限制HIV-1活性，但SWAP-1的活性更强一些，这表明TRIM5结构域的外显子7可能在介导对HIV-1的限制活性中发挥了协同辅助作用。免疫共沉淀研究表明，npmTRIMCyp不能识别和结合HIV-1的衣壳蛋白。对北平顶猴中介导识别逆转录病毒区域的基因组部分进行了测序，共鉴定出46个多态性位点，表明在北平顶猴识别逆转录病毒衣壳区域存在较高的多态性。

Investigation of the gel effect in reactive extrusion processes for free radical polymerization

The gel effect in the reactive extrusion process for free radical polymerization in a closely intermeshing co-rotating twin screw extruder was investigated. First the reaction kinetic model was constructed mainly on the basis of entanglement theory. Next, numerical calculation expressions for the initiator and monomer concentrations, monomer conversion, average molecular weight and apparent viscosity were deduced. Finally, the evolution of the above variables were shown and discussed for the example of butyl methacrylate. The simulated results of the monomer conversion are in good agreement with experimental results.

Transition from crazing to shear deformation in ABS/PVC blends

ABS/PVC blends were prepared over a range of compositions by mixing PVC, SAN, and PB-g-SAN. All samples were designed to have a constant rubber level of 12 wt % and the ratio of total-SAN to PVC in the matrix of the blends varied from 70.5/17.5 to 18/80. Transmission electron microscope and scanning electron microscope have been used to study deformation mechanisms in the ABS/PVC blends. Several different types of microscopic deformation mechanisms, depending on the composition of blends, were observed for the ABS/PVC blends. When the blend is a SAN-rich system, the main deformation mechanisms were crazing of the matrix. When the blend is a PVC-rich system, crazing could no longer be detected, while shear yielding of the matrix and cavitation of the rubber particles were the main mechanisms of deformation. When the composition of blend is in the intermediate state, both crazing and shear yielding of matrix were observed. This suggests that there is a transition of deformation mechanism in ABS/PVC blends with the change in composition, which is from crazing to shear deformation.

Structure-properties relationship in toughening of poly(butylene terephthalate) with core-shell modifier

The performance of acrylonitrile-butadiene-styrene (ABS) core-shell modifier with different grafting degree, acrylonitrile (AN) content, and core-shell ratio in toughening of poly(butylene terephthalate) (PBT) matrix was investigated. Results show PBT/ABS blends fracture in ductile mode when the grafting degree is high, and with the decrease of grafting degree PBT/ABS blends fracture in a brittle way. The surface of rubber particles cannot be covered perfectly for ABS with low grafting degree and agglomeration will take place; on the other hand, the entanglement density between SAN and PBT matrix decreases because of the low grafting degree, inducing poor interfacial adhesion. The compatibility between PBT and ABS results from the strong inter-action between PBT and SAN copolymer and the interaction is influenced by AN content. Results show ABS cannot disperse in PBT matrix uniformly when AN content is zero and PBT/ABS fractures in a brittle way. With the addition of AN in ABS, PBT/ABS blends fracture in ductile mode. The core-shell ratio of ABS copolymers has important effect on PBT/ABS blends.

The deformation mechanism of polyphenylquinoxaline films

The plateau modulus of polyphenylquinoxaline (PPQ-E) films has been obtained by from their dynamic mechanical properties curves. Using these data, the entanglement density of PPQ-E films, 2.37 X 10(26) m(-3) Or 0.39mmol/cm(3),has been estimated. The deformation mechanism of polyphenylquinoxaline (crazing mechanism,or shear yielding mechanism, or both), can be predicted according to entanglement density values. The changes in morphology of PPQ-E films during tensile deformation have been observed by Polarized Light Microscope. The result shows that crazing first appears in the tensile process, then shear yielding appears. It needs to point out that the craze is terminated by micro-shear band and the direction of craze in shear band is also changed,which prevents the craze growth into crack and avoid the failure of material. This result is in accordance with the prediction on the basis of the entanglement density data. The morphology and structure of crazes in PPB-E thin film have been determined by TEM. The craze morphology of PPQ-E is mainly fibril craze consisting of micro-fibrils and micro-voids,the interface between bulk and craze is distinct. Multiply crazes, blunting of craze tip and shear deformation zone are also observed. This result reflects the accordance of entanglement density and the morphology and structure of crazes.

Investigating mechanical response of single chain polystyrene particles by scanning probe techniques

Single chain polystyrene particles were obtained by dilute solution casting method. The sample with both single chain polystyrene particles and multi-chain (more than 1000 molecular chains) polystyrene particles was obtained by a little more concentrate solution. Force modulation technique showed that single chain polystyrene particles were softer than multichain polystyrene particles. On the other hand, nanoindentation experiments on multi-chain particles and bulk polystyrene manifested that the elastic modulus of multi-chain polystyrene particles was very close to that of bulk polystyrene. Therefore, it was concluded that single chain polystyrene particles were softer than bulk polystyrene,which indicated that the density of intrachain entanglement points in the single chain polystyrene particles was not as large as that of the interchain entanglement points in the bulk state.

Influence of intermolecular entanglements on the glass transition and structural relaxation behaviors of macromolecules. 2. Polystyrene and phenolphthalein poly(ether sulfone)

The effect of entanglements on the glass transition and structural relaxation behaviors has been studied for polystyrene (PS) and phenolphthalein poly(ether sulfone) (PES-C) samples by fast evaporation of the solution of concentrations varying from above the overlapping concentration to far below it, and compared to the results we have studied previously in PC. It has been found that for all the polymers we have studied, in the concentrated solution region, the T-g of the samples obtained from solution are independent of the change of concentration and are very close to that of normal bulk samples, whereas in the dilute solution region the T-g of the samples decrease with the logarithm of decreasing concentration. The critical concentrations that divide the two distinct regions for the three polymers are 0.9% g/mL for PC, 0.1% g/mL for PS, and 1% g/mL for PES-C. The decrease of T-g of the samples is interpreted by the decrease of intermolecular entanglements as the isolation of polymer chains, and the entanglement of polymer chains restrained the mobility of the segments. The structural relaxation behavior of the polymers is also found to be different from that of normal bulk samples. The enthalpies of single-chain samples are lower than that of the bulk ones, which correspond to the lower glass transition temperature; the peaks are lower and broader, and the relaxed enthalpy is much lower as compared to that of bulk samples. In the three polymers we have studied, the influence of change of entanglements on both the decrease in glass transition temperature and relaxed enthalpy is the most significant for PS and the least for PES-C. It is indicated that the interactions in the flexible polymers are weak; thus, the restraint of the entanglements on the mobility of the segments plays a more important role in the flexible polymers, and the change of entanglement in the flexible polymers has a more significant influence on the physical properties.

The effects of physical ageing on crazing of polyphenylquinoxaline films

The effects of physical ageing on the crazing of polyphenylquinoxaline (PPQ-E) films were studied. The DSC endothermic peak at the glass transition region of the samples was interpreted in terms of the cohesional entanglement theory. The free volume cavity size and free volume intensity of the samples were characterized by positron annihilation life spectroscopy. The difference in free volume cavity size and free volume intensity between two samples reflect the strength and density of cohensional entanglement point. The critical strain for craze initiation and craze stability depended on physical ageing of the samples. The relationships between physical ageing and crazing were interpreted initially.

Influence of entanglements an the glass transition and structural relaxation behaviors of macromolecules. 1. Polycarbonate

We obtained the single-chain polycarbonate sample, by a new fast evaporation method and found that the polycarbonate sample obtained by this method is completely amorphous, while the polycarbonate sample obtained by other methods all have a certain degree of crystallinity. The glass transition temperature (T-g) of the sample decreases with the decreasing of concentration when the concentration of the prepared solution is below the critical value. The critical concentration we obtained from the T-g dependence of concentration is 0.9% g/mL and is in accord with that obtained by viscometry and light scattering methods directly from the solution. The structural relaxation behavior is found also different from that of a normal bulk sample of polycarbonate. The enthalpic peak of the single-chain sample is lower: than that of the bulk one, which corresponds to the lower glass transition temperature. The peak of the single-chain sample is lower and broader, and the relaxed enthalpy is much lower compared with that of the bulk sample. These results have been explained in terms of the effect of entanglement on the mobility of the segments in polymer and the compact conformation in the single-chain sample.

Rheological studies on the phase dissolution in a block copolymer

The microphase transition in a styrene-butadiene-styrene triblock copolymer was studied by rheometric mechanical spectroscopy. A high-temperature-melt rheological transition from the highly elastic, nonlinear viscous behavior typical of a multiphase structure to linear viscous behavior with insignificant elasticity typical of a single-phase structure was observed. The transition temperature is determined according to the discontinuity of the rheological properties across the transition region, which agrees well with the results obtained from the small angle X-ray scattering data and the expectation of the random phase approximation theory. Maybe for the first time, microphase dissolution was investigated theologically. The storage modulus (G') and the loss modulus (G '') increase with time during the process. An entanglement fluctuation model based on the segmental density fluctuations is presented to explain the rheological behavior in this dissolution process. (C) 1997 John Wiley & Sons.

Dynamic mechanical properties of interpenetrating polymer networks based on polyacrylates and epoxy

Interpenetrating polymer networks (IPNs) based on polyacrylate (poly(polyethylene glycol diacrylate), PEGDA) and epoxy(diglycidyl ether of bisphenol A, DGEBA) were prepared simultaneously Dynamic mechanical properties of the SINs (simultaneous interpenetrating networks) with various compositions were studied. Enhanced mechanical properties were found in this case. From the point of view of pre-swollen networks, all of the PEGDA/DGEBA IPNs were composed of the individual pre-swollen networks. A micro-phase segregation system was produced in the SIN. Glass transition temperatures shifted inward, which was attributed to molecular packing effects or mutual-entanglements of molecular segments among the individual pre-swollen networks. In accordance with the additivity of properties, namely the parallel model, the entanglement density between the two polymer networks reached its maximum at 50/50 PEGDA/DGEBA IPN.