Performance of supersonic model combustors with staged injections of supercritical aviation kerosene

Supersonic model combustors using two-stage injections of supercritical kerosene were experimentally investigated in both Mach 2.5 and 3.0 model combustors with stagnation temperatures of approximately 1,750 K. Supercritical kerosene of approximately 760 K was prepared and injected in the overall equivalence ratio range of 0.5-1.46. Two pairs of integrated injector/flameholder cavity modules in tandem were used to facilitate fuel-air mixing and stable combustion. For single-stage fuel injection at an upstream location, it was found that the boundary layer separation could propagate into the isolator with increasing fuel equivalence ratio due to excessive local heat release, which in turns changed the entry airflow conditions. Moving the fuel injection to a further downstream location could alleviate the problem, while it would result in a decrease in combustion efficiency due to shorter fuel residence time. With two-stage fuel injections the overall combustor performance was shown to be improved and kerosene injections at fuel rich conditions could be reached without the upstream propagation of the boundary layer separation into the isolator. Furthermore, effects of the entry Mach number and pilot hydrogen on combustion performance were also studied.

Properties and applications of cold supersonic gas jet

By analyzing the formation mechanism of a supersonic gas jet, a set of equations which describe the atomic beam properties were established. The influence of initial temperature, initial pressure, background gas pressure and pumping speed was discussed in detail. A simulation program was developed based on the equations, and the results under different initial conditions were obtained. The results are in good agreement with the experimental data, and suggest that, in order to get much smaller transverse momentum in collision experiments, it is necessary to lower the initial temperature and the initial pressure of the supersonic gas jet, together with increasing the pumping speed. These results are very instructive for construction of a new generation of cold supersonic gas jets.

乙烯超声速燃烧的数值模拟研究

利用Fluent软件、ISAT算法与由CARM(Computer Assisted Reduction Method)简化而来的11组分、7步反应的乙烯简化机理对碳氢燃料/空气的超声速燃烧问题进行数值模拟.研究结果表明这种方法是可利用的.计算得到的压力数据与试验压力值可以比较.

Micro-shock waves generated inside a fluid jet impinging on plane wall

An Nd:glass laser pulse (18 ns, 1.38 J) is focused in a tiny area of about 100-mum diam under ambient conditions to produce micro-shock waves. The laser is focused above a planar surface with a typical standoff distance of about 4 mm, The laser energy is focused inside a supersonic circular jet of carbon dioxide gas produced by a nozzle with internal diameter of 2.9 mm and external diameter of 8 mm, Nominal value of the Mach number of the jet is around 2 with the corresponding pressure ratio of 7.5 (stagnation pressure/static pressure at the exit of the nozzle), The interaction process of the micro-shock wave generated inside the supersonic jet with the plane wall is investigated using double-pulse holographic interferometry. A strong surface vortex field with subsequent generation of a side jet propagating outward along the plane wail is observed. The interaction of the micro-shock wave with the cellular structure of the supersonic jet does not seem to influence the near surface features of the flowfield. The development of the coherent structures near the nozzle exit due to the upstream propagation of pressure waves seems to be affected by the outward propagating micro-shock wave. Mach reflection is observed when the micro-shock wave interacts with the plane wall at a standoff distance of 4 mm, The Mach stem is slightly deflected, indicating strong boundary-layer and viscous effects near the wall. The interaction process is also simulated numerically using an axisymmetric transient laminar Navier-Stokes solver. Qualitative agreement between experimental and numerical results is good.

超音速来流中侧向喷流干扰流场的数值模拟

通过求解三维可压缩N-S方程组，对尖锥／圆柱组合体模型在超音速绕流中的侧向喷流干扰流场进行了模拟，数值方法采用有限体积法，差分格式采用NND格式。分析了干扰流场的结构，研究了干扰效应对气动性能的影响，得到来流Ma。。=3．3和4．5时力放大因子和干扰力矩系数随攻角变化的规律，计算结果与实验一致。

Numerical Analyses of Discrete Gust Response for an Aircraft

Based on Navier-Stokes equations and structural and flight dynamic equations of motion, dynamic responses in vertical discrete gust flow perturbation are investigated for a supersonic transport model. A tightly coupled method was developed by subiterations between aerodynamic equations and dynamic equations of motion. First, under the assumption of rigid-body and single freedom of motion in the vertical plunging, the results of a direct-coupling method are compared with the results of quasi-steady model method. Then, gust responses for the one-minus-cosine gust profile arc analyzed with two freedoms of motion in plunging and pitching for the airplane configurations with and without the consideration of structural deformation.

超声速气流中含灰气体点源流动特性

采用Lagrange方法，研究了超声速气流中含灰气体点源的流动特性，求得了对称辆附近激波层内的流动参数。计算数值模拟结果揭示了大惯性颗粒在激波层内沿着相互交叉的振荡轨迹运动，颗粒分布形成了高、低密度层交错出现的“多层结构”，而且粒子子在轨迹包络线附近急剧聚集。

超声速大攻角旋成体迎风激波数值模拟

旋成弹体在大攻角超声速流动中其迎风面上有时会出现一种迎风激波.采用非定常雷诺平均的Navier-Stokes方程以及两方程kω-sst和代数B-L湍流模型成功地模拟了该现象,验证了该迎风激波是由于流场主旋涡导致超声速流动偏移造成的涡诱导激波的一部分的结论.

扩压段对高超声速推进风洞起动的影响

高超声速推进风洞是进行超燃冲压发动机模型地面模拟的重要试验设备.其中,扩压段的设计非常重要,它不是孤立的,而与主流系统和引射系统密切相关.通过对不同几何形状的扩压段在不同安装位置进行调试,研究在风洞起动过程中整个系统流动状态的演变规律,探索扩压段的优化设计.实验表明,扩压段应安装在距主喷管较近的位置,并具有与主喷管相匹配的入口面积和形状.扩压段的形状应设计成能使主气流通过一系列斜激波串减速的通道.扩压段应具有一定的长度以保证主气流减速到一定程度.