High resolution time-of-flight spectrometer for crossed molecular beam study of elementary chemical reactions

In this article, we describe an apparatus in our laboratory for investigating elementary chemical reactions using the high resolution time-of-flight Rydberg tagging method. In this apparatus, we have adopted a rotating source design so that collision energy can be changed for crossed beam studies of chemical reactions. Preliminary results on the HI photodissociation and the F atom reaction with H-2 are reported here. These results suggest that the experimental apparatus is potentially a powerful tool for investigating state-to-state dynamics of elementary chemical reactions. (c) 2005 American Institute of Physics.

Comparison of comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry and gas chromatography-mass spectrometry for the analysis of tobacco essential oils

A sample of tobacco essential oil was analyzed using gas chromatography-mass spectrometry (GUMS)and comprehensive two-dimensional gas chromatography coupled to a time-of-flight mass spectrometry (GC x GC/TOFMS), respectively. In the GUMS analysis, serially coupled columns were used. By comparing the GUMS results with GC x GC/TOFMS result,,, many more components in the essential oil could be found within the two-dimensional separation space of GC x GC. The quantitative determination of components in the essential oil was performed by GC x GC with flame ionization detection (FID), using a method of multiple internal standards calibration, (c) 2005 Elsevier B.V. All rights reserved.

Quantitative determination of compounds in tobacco essential oils by comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry

A quantitative analysis of the individual compounds in tobacco essential oils is performed by comprehensive two-dimensional gas chromatography (GC x GC) combined with flame ionization detector (FID). A time-of-flight mass spectrometer (TOF/MS) was coupled to GC x GC for the identification of the resolved peaks. The response of a flame ionization detector to different compound classes was calibrated using multiple internal standards. In total, 172 compounds were identified with good match and 61 compounds with high probability value were reliably quantified. For comparative purposes, the essential oil sample was also quantified by one-dimensional gas chromatography-mass spectrometry (GC/MS) with multiple internal standards method. The results showed that there was close agreement between the two analysis methods when the peak purity and match quality in one-dimensional GC/MS are high enough. (c) 2005 Elsevier B.V. All rights reserved.

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry with a matrix of carbon nanotubes for the analysis of low-mass compounds in environmental samples

The use of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) for environmental analysis has been mainly focused on qualitative analysis of high-mass molecules, such as toxins, humic acid, and microorganisms. Herein,we describe a novel MALDI-TOF-MS method with a matrix of oxidized carbon nanotubes for analysis of low-mass compounds in environmental samples. A number of chemicals in the environment were qualitatively analyzed by the present method, and it was found that most of them, especially the highly polar chemicals, were measurable with high sensitivity. With the intrinsic ability to measure high-mass chemicals, this method can compensate for the current shortage of methods for environmental analysis for the measurement of highly polar or high-mass chemicals. For sample analysis, arsenic speciation in Chinese traditional medicines was qualified and diphenylolpropane in water samples was quantified. With the relatively high tolerance of the method to interfering molecules, a simple pretreatment or even no pretreatment could be employed before MS detection. Furthermore, this method can be employed in a high-throughput format.

Integration of ion-exchange chromatography fractionation with reversed-phase liquid chromatography-atmospheric pressure chemical ionization mass spectrometer and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for isolation and identification of compounds in Psoralea corylifolia

An approach for the separation and identification of components in a traditional Chinese medicine Psoralea corylifolia was developed. Ion-exchange chromatography (IEC) was applied for the fractionation of P corylifolia extract, and then followed by concentration of all the fractions with rotary vacuum evaporator. Each of the enriched fractions was then further separated on an ODS column with detection of UV absorbance and atmospheric pressure chemical ionization mass spectrometer (APCI/MS), respectively, and also analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF/MS) with matrix of oxidized carbon nanotubes. Totally more than 188 components in P. corylifolia extract were detected with this integrated approach, and 12 of them were preliminary identified according to their UV spectra and mass spectra performed by APCI/MS and MALDI-TOF/MS. The obtained analytical results not only demonstrated the powerful resolution of integration IEC fractionation with reversed-phase liquid chromatography (RPLC)-APCI/MS and MALDI-TOF/MS for analysis of compounds in a complex sample, but also exhibited the superiority of APCI/MS and MALDI-TOF/MS for identification of low-mass compounds, such as for study of traditional Chinese medicines (TCMs) and metabolome. (c) 2005 Published by Elsevier B.V.

Separation and detection of compounds in Honeysuckle by integration of ion-exchange chromatography fractionation with reversed-phase liquid chromatography-atmospheric pressure chemical ionization mass spectrometer and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis

A hyphenated method for the isolation and identification of components in a traditional Chinese medicine of Honeysuckle was developed. Ion-exchange chromatography (IEC) was chosen for the fractionation of Honeysuckle extract, and then followed by concentration of all the fractions with rotary vacuum evaporator. Each of the enriched fractions was then further analyzed by reversed-phase liquid chromatography-atmospheric pressure chemical ionization mass spectrometer (RPLC-APCI/MS) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF/MS) with matrix of oxidized carbon nanotubes, respectively. It can be noted totally more than 117 components were detected by UV detector, APCI/MS and MALDI-TOF/MS in Honeysuckle extract except the, 145 components identified by MALDI-TOF/MS alone with this integrated approach, and 7 of them were preliminary identified according to their UV spectra and mass spectra performed by APCI/MS and MALDI-TOF/MS, respectively. The obtained analytical results not only indicated the approach of integration IEC fractionation with RPLC-APCI/MS and MALDI-TOF/MS is capable of analyzing complex samples, but also exhibited the potential power of the mass spectrometer in detection of low-mass compounds, such as traditional Chinese medicines (TCMs) and complex biological samples. (c) 2005 Elsevier B.V. All rights reserved.

岷江柏种子的形态和发芽特征与贮藏生理动态研究

岷江柏(Cupressus chenggiana S. Y. Hu)是我国川甘地区特有的珍稀濒危乔木，一般生长在干旱的河谷区，在涵养水源和保护水 土等方面起着重要的作用。本文选择4个岷江柏种群，采用了野外调查和室内实验相结合的研究方法，调查岷江柏种群结实状况， 分析种子和球果形态特征，阐明种子发芽的基本特征，研究岷江柏种子贮藏过程中几个生理指标的动态变化特点，目的是为岷江柏 种苗繁育、自然更新能力评估以及珍稀濒危机制分析提供理论依据。研究得出如下结论：1.岷江柏球果呈椭球形，长为1.5～ 2.2cm,宽为1.5～1.9cm，质量为1.7～4.2g，球果鳞片数量为8～11片，球果内种子数量一般在40～70粒。岷江柏种子为椭圆形，长 为3.58～4.02mm，宽为3.10～3.15mm，厚为0.96～1.11mm，千粒重为3.1～3.5g。岷江柏的结实率很低，并且有显著的地理差异和 大小年差异。2. 岷江柏种子发芽温度范围是5℃～30℃,其中种子的适宜发芽温度范围是10℃～25℃。种子最适发芽温度随着贮藏 时间的增加而变化。在适宜温度范围内，种子发芽周期为20d。温度对种子的发芽势和T50有显著影响，对种子发芽率没有显著影响 ；光照有利于种子发芽；岷江柏种子的发芽特征是岷江柏保护种子资源、防止物种濒危的一种环境适应，有助于岷江柏种子提高发 芽率和幼苗的存活率。岷江柏种子是一种耐贮藏的正常性种子，在短期贮藏过程中，贮藏温度和种子含水量对于种子生理指标和种 子发芽没有显著影响。3. 岷江柏种子在短期贮藏过程中，千粒重没有显著变化；含水量都经历了先下降，再稳定的过程；粗脂肪 含量和可溶性糖含量逐渐降低；可溶性蛋白含量和丙二醛含量逐渐增加；脯氨酸含量在贮藏1～7个月时变化差异不明显，但是贮藏 7～10个月后显著增加。岷江柏种子的各个生理指标之间的相关性差异不显著。4. 岷江柏球果和种子的形态特征存在显著的地理差 异。岷江柏种子的发芽能力的地理性差异不大，种群间差异不大。岷江柏种群的地理差异由种群特征、生境特征和气候特征共同决 定。5. 在岷江柏的人工繁育中，对于刚刚采集的种子，发芽温度在15℃～25℃比较适合，其中以25℃最佳；而对于短期贮藏(4～ 10个月)后的种子，发芽温度在10℃～25℃均可，以15℃～20℃为最佳。野外播种的最适时间为4～6月，6～9月的间歇性干旱和降 水波动可能是限制岷江柏自然更新的因素之一。在短期贮藏过程中，种子可以采用常规室温贮藏，可以节约成本。Cupressus chenggiana is a specific and endangered plant in Sichuan and Gansu provinces of China, and it usually grows in dry valley and plays an important role in water supply and soil and water conservation in the dry valley of alpine and canyon region of southwest China. The research selected four Cupressus chenggiana populations and used the methods of the field investigation and the lab experiments. The fruiting characters of Cupressus chenggiana populations, the morphological characters of seeds and cones, the germination characters of seeds and the store physiological dymatics of several factors of seeds have been studied in order to give some theoretical advices on the artificial propagation and the ability of natural regeneration and the endangered principle of Cupressus chenggiana in the paper. The main results may be clarified as follows: 1. The cones of Cupressus chenggiana are ellipsoidal, length ranged from 1.5 to 2.2cm, with ranged from 1.5 to 1.9 cm, weight ranged from 1.7 to 4.2g, the number of cone squama ranged from 8 to 11, and the seed number of per cone ranged from 40 to 70. The seeds of Cupressus chenggiana are elliptical, length ranged from 3.58 to 4.02 mm, width ranged from 3.10 to 3.15 mm, thickness ranged from 0.96 to 1.11 mm, and the weight of 1000 seeds ranged from 3.1 to 3.5g. The fruiting rate of Cupressus chenggiana is very low, and the fruiting period of Cupressus chenggiana has the geographical differences and the big or small year differences. 2. Seed germination temperature is between 5℃ and 30℃, while the suited temperature is between 10℃ and 25℃. The optimum temperature of seed germination will change as the store time of seeds changes logner. The cycle of seed germination can persist 20 days in the range of the suited temperature. The germination temperatures have significant influences on the germination potential and T50, but have no significant infuluences on the germination rate. The photoperiod is in favor of seed germination. The characters of Cupressus chenggiana seed germination represent a kind of environmental adaptability to protect the seed sources and endangered species, and it can give help to increase the germination rate of seeds and the livability of seedings. The seeds of Cupressus chenggiana are a kind of orthodox seeds that can endure the long time storage. In the short time storage, the store temperatures and the moisture contents of seeds have no significant infuluences on the physiological factors and the germination of seeds, but the store time has significant influences on the physiological factors of seeds. 3. In the short store course of Cupressus chenggianna seeds, the 1000 seed weight has no significant variation; The moisture content descends at the beginning of the storage, but has no significant variation later; The crude fat content and the soluble sugar content descend gradually; The soluble protein content and MDA content increase gradually; The praline content has no significant variation after 1～7 months storage, but increase significantly after 7～10 months storage. The correlations of different physiological factors are not significant. 4. The morphological characters of cones and seeds of four populations exist significant differences. The germination of Cupressus chenggiana seeds has no significant geographical variation. The geographical variation of Cupressus chenggiana populations can be ascribed to the population characters, climate and environment. 5. In the course of artificial propagation of Cupressus chenggiana, it is favored that the germination temperature of newly collected seeds is between 15℃ and 25℃, while the optimum temperature is 25℃. After the short storage ranged from 4 months to 10 months, it is favored that the germination temperature is between 10℃ and 25℃, while the optimum temperature is ranged from 15℃ to 20℃. The field sowing optimum time is between April and June, and the interval drought and fallrain fluctuation between July and September may be one of the reasons that restrict natural regeneration of Cupressus chenggiana. In the short storage, seeds can be stored in the condition of room temperature.

Readout of a real-time hologram in bacteriorhodopsin film with high diffraction efficiency and intensity

A scheme for the readout of a hologram recorded in bacteriorhodopsin film with high diffraction efficiency and intensity is suggested and demonstrated. Two weak coherent continuous beams function as the recording beams, and a strong light pulse is used to read the real-time hologram. The width of the readout light pulse is modulated to be short compared with the erase time of the reading beam; the time space between two adjacent pulses is ensured to be longer than the time the beams take to recover the hologram, and high diffraction efficiency and intensity (similar to 11 mW/cm(2)) can be obtained. (C) 1996 Optical Society of America.

Agrobacterium-mediated transformation of Kentucky bluegrass

Embryogenic calli of Kentucky bluegrass, named Md, were induced from mature seeds and embryos, and proliferated on medium K3 containing 2,4-dichlorophenoxyacetic acid (2,4-D, 10.0 mumol/L), 6-benzylaminopurine (BAR, 0.5 mumol/L) and K5 which was the K3 medium supplemented with cupric sulfa (0.5 mumol/L) under dim-light condition (20-30 mumol.m(-2).s-1, 16 h light) at 24 degreesC. Embryogenic calli were transformed with plasmids pDM805 Carring bar and gus genes, Which was mediated by an Agrobacterium strain AGL1, four transgenic lines were obtained. The important factors that affect the transformation efficiency and obtain desirable number of transgenic plants included: (1) the quality of embryogenic calli; (2) light condition and time of co-cultivation; (3) concentration of antibiotics used for suppressing the overgrowth of Agrobacterium in the course of transformed plant regeneration; (4) selection pressure, etc. The micro nutrient of cupric had significant influence on the quality of embryogenic calli. This presentation is the first successful protocol of Kentucky bluegrass transformation mediated by Agrobacterium.

Direct observation of coherent spin transfer processes in an InGaAs/GaAs quantum well via two-color time-resolved Kerr rotation measurements

A two-color time-resolved Kerr rotation spectroscopy system was built, with a femtosecond Ti:sapphire laser and a photonic crystal fiber, to study coherent spin transfer processes in an InGaAs/GaAs quantum well sample. The femtosecond Ti:sapphire laser plays two roles: besides providing a pump beam with a tunable wavelength, it also excites the photonic crystal fiber to generate supercontinuum light ranging from 500 nm to 1600 nm, from which a probe beam with a desirable wavelength is selected with a suitable interference filter. With such a system, we studied spin transfer processes between two semiconductors of different gaps in an InGaAs/GaAs quantum well sample. We found that electron spins generated in the GaAs barrier were transferred coherently into the InGaAs quantum well. A model based on rate equations and Bloch-Torrey equations is used to describe the coherent spin transfer processes quantitatively. With this model, we obtain an effective electron spin accumulation time of 21 ps in the InGaAs quantum well.

Time-resolved photoluminescence of sub-monolayer InGaAs/GaAs quantum-dot-quantum-well heterostructures

Time-resolved photoluminescence (PL) of sub-monolayer (SML) InGaAs/GaAs quantum-dot-quantum-well heterostructures was measured at 5 K for the first time. The radiative lifetime of SML quantum dots (QDs) increases from 500 ps to 800 ps with the increase of the size of QDs, which is related to the small confinement energy of the excitons inside SML QDs and the exciton transfer from smaller QDs to larger ones through tunneling. The rise time of quantum-dot state PL signal strongly depends on the excitation power density. At low excitation power density, the rise time is about 35 ps, the mechanism of carrier capture is dominated by the emission of longitudinal-optical phonons. At high excitation power density, the rise time decreases as the excitation density increases, and Auger process plays an important role in the carrier capture. These results are very useful for understanding the working properties of sub-monolayer quantum-dot devices.

Influence of nitridation time on the morphology of GaN nanorods synthesized by nitriding Ga2O3/ZnO films

Gallium nitride (GaN) nanorods were synthesized by nitriding Ga2O3/ZnO films which were deposited in turn on Si (111) substrates using radio frequency (RF) magnetron sputtering system. In the nitridation process, ZnO was reduced to Zn and Zn sublimated at 950 degrees C. Ga2O3 was reduced to Ga2O and Ga2O reacted with NH3 to synthesize GaN nanorods with the assistance of the sublimation of Zn. The morphology and structure of the nanorods were studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and selected-area electron diffraction (SAED). The composition of GaN nanorods was studied by Fourier-transform infrared spectrophotometer (FTIR). The synthesized nanorods is hexagonal wurtzite structured. Nitridation time of the samples has an evident influence on the morphology of GaN nanorods synthesized by this method. (c) 2006 Elsevier B.V. All rights reserved.

The effect of AlN growth time on the electrical properties of Al0.38Ga0.62N/AlN/GaN HEMT structures

Al0.38Ga0.62N/AIN/GaN HEMT structures have been grown by metal-organic chemical vapor deposition (MOCVD) on 2-inch sapphire substrates. Samples with AIN growth time of 0s (without AIN interlayer), 12, 15, 18 and 24s are characterized and compared. The electrical properties of two-dimensional electron gas (2DEG) are improved by introducing AIN interlayers. The AIN growth time in the range of 12-18s, corresponding to the AIN thickness of 1-1.5 nm, is appropriate for the design of Al0.38Ga0.62N/AIN/GaN HEMT structures. The lowest sheet resistance of 277 Omega sq(-1) and highest room temperature 2DEG mobility of 1460 cm(2)V(-1) s(-1) are obtained on structure with AIN growth time of 12s. The structure with AIN growth time of 15s exhibits the highest 2DEG concentration of 1.59 x 10(13) cm(-2) and the smallest RMS surface roughness of 0.2 nm. (c) 2006 Elsevier B.V. All rights reserved.

Experimental measurement of microwave-induced electron spin-flip time

The electron spin resonance (ESR) is optically detected by monitoring the microwave-induced changes in the circular polarization of the neutral exciton (X) and the negatively charged exciton (X-) emission in CdTe quantum wells with low density of excess electrons. We find that the circular polarization of the X and X- emission is a mapping of the spin polarization of excess electrons. By analyzing the ESR-induced decrease in the circular polarization degree of the X emission, we deduce the microwave-induced electron spin-flip time >0.1 mus, which is much longer than the recombination time of X and X-. This demonstrates that the optically detected ESR in type I quantum wells with low density of excess electrons does not obey the prerequisite for the conventional optically detected magnetic resonance. (C) 2001 American Institute of Physics.