Hydrogenation of o-chloronitrobenzene to o-chloroaniline over Pd/C in supercritical carbon dioxide

Hydrogenation of o-chloronitrobenzene (o-CNB) to o-chloroaniline (o-CAN) with Pd/C has been investigated in supercritical carbon dioxide (scCO(2)) at 308 K. The influences of several parameters such as CO2, H-2 pressures, Fd metal particle size and reaction time have been discussed. CO2 pressure presented markedly effects on the reaction rate and product selectivity under the reaction conditions used, the selectivity to o-CAN at CO2 pressure from 8 to 13 MPa (supercritical region) was larger than that at CO2 pressure below 6 MPa (subcritical region).

Kinetic study of formic acid oxidation on carbon supported Pd electrocatalyst

The oxidation of formic acid at the Pd/C catalyst electrode is a completely irreversible kinetic process with the reaction order of 1.0. The oxidation rate of formic acid is increased with increasing the concentration of formic acid and is decreased with increasing H+ concentration. The apparent negative reaction order with respect to H+ is about -0.18 or -0.04 in H2SO4 or HClO4 solution respectively, because bisulfate anions would inhibit formic acid oxidation at some extent. The kinetic parameters, charge transfer coefficient and the diffusion coefficient of formic acid were obtained under the quasi steady-state conditions.

Efficient Electrophosphorescence from a Platinum Metallopolyyne Featuring a 2,7-Carbazole Chromophore

The synthesis, thermal and emission properties of an electrophosphorescent platinum(II) metallopolyyne polymer consisting of 9-butylcarbazole-2,7-diyl spacer P1 are described. The optical and electronic properties of P1 are compared to their molecular diplatinum(II) and digold(I) model complexes. The photophysical properties of P1 are somehow analogous to its 2,7-fluorene-linked congener but differs significantly from that for the 3,6-carbazole derivative. Its optical band gap is notably reduced as compared to that for the 3,6-carbazole analog. Multi-layer polymer light-emitting diodes (PLEDs) were fabricated with P1 as the emitting layer which gave a strong green-yellow electrophosphorescence. The best PLED can reach the maximum current efficiency of 4.7 cd . A(-1) at 5 wt.-% doping level, corresponding to an external quantum efficiency of 1.5%. This represents the first literature example of efficient PLEDs exhibiting pure triplet emission under electrical excitation for metallopolyynes without the concomitant singlet emission.

基于2,5-二(4-氨基苯)嘧啶聚酰亚胺的合成及性能表征

1,5-二氮杂戊二烯盐(vinamidium salts)与4-硝基苯甲脒盐在碱性物质的存在下发生成环反应得含嘧啶环的硝基化合物;硝基化合物用Pd/C和水合肼还原得到棒状含氮芳杂环二胺——2,5-二(4-氨基苯基)嘧啶.通过1H-NMR,13C-NMR,IR,MS及元素分析确证了含氮芳杂环二胺及其中间产物的结构.这种二胺或加一定量对苯二胺与均苯二酐(PMDA)或联苯二酐(BPDA)通过两步法聚合获得一系列聚酰亚胺,通过红外、动态力学、静态力学、热重分析、广角X射线衍射等实验测试了该类聚合物的结构、热性能、机械性能及结晶性能.

有机溶胶法制备直接甲酸燃料电池用Pd/C阳极催化剂

采用改进的有机溶胶法制备了用于直接甲酸燃料电池(DFAFC)中甲酸氧化的炭载Pd(Pd/C)催化剂。制备Pd/C催化剂时,以乙醇作溶剂,SnCl2作还原剂。控制溶剂的蒸发温度就能控制Pd/C催化剂中Pd粒子的平均粒径和相对结晶度。溶剂蒸发温度与Pd/C催化剂中Pd粒子的平均粒径和相对结晶度不成正比关系。在选择合适的溶剂蒸发温度时,能制得Pd粒子的平均粒径至6.5 nm和相对结晶度至2.85的Pd/C催化剂。比较了具有不同Pd粒子的平均粒径和相对结晶度的Pd/C催化剂对甲酸氧化的电催化性能。结果发现,Pd粒子的平均粒径小和相对结晶度低的Pd/C催化剂对甲酸氧化有好的电催化性能。

Electronic structures of MCO (M = Nb, Ta, Rh, Ir, Pd, Pt) molecules by density functional theory

Equilibrium geometries, vibrational frequencies, and dissociation energies of the transition metal carbonyls MCO (M = Nb, Ta, Rh, Ir, Pd, Pt) were studied by use of diverse density functional methods B3LYP, BLYP, B3P86, B3PW91, BHLYP, BP86, and PBE1PBE. It was found that the ground electronic state is (6)Sigma(+) for NbCO and TaCO, (2)Sigma(+) for RhCO,(2)Delta for IrCO, and (1)Sigma(+) for PdCO and PtCO, in agreement with previous theoretical studies. The calculated properties are highly dependent on the functionals employed, in particular for the dissociation energy. For most of the molecules, the predicted bond distance is in agreement with experiments and previous theoretical results. BHLYP is the worst method in reproducing the experimental results compared with the other density functional methods for the title molecules.

Simple preparation method of Pd nanoparticles on an Au electrode and its catalysis for dioxygen reduction

A simple method for the fabrication of Pd nanoparticles is described. The three-dimensional Pd nanoparticle films are directly formed on a gold electrode surface by simple electrodeposition at -200 mV from a solution of 1 M H2SO4+0.01 mM K2PdCl4. X-Ray photoelectron spectroscopy verifies the constant composition of the Pd nanoparticle films. Atomic force microscopy proves that the as-prepared Pd nanoparticles are uniformly distributed with an average particle diameter of 45-60 nm. It is confirmed that the morphology of the Pd nanoparticle films are correlated with the electrodeposition time and the state of the Au substrate. The resulting Pd-nanoparticle-film-modified electrode possesses high catalytic activity for the reduction of dissolved oxygen in 0.1 M KCl solution. Freshly prepared Pd nanoparticles can catalyze the reduction of O-2 by a 4-electron process at -200 mV in 0.1 M KCl, but this system is not very stable. The cathodic peaks corresponding to the reduction of O-2 gradually decrease with potential cycling and at last reach a steady state. Then two well-defined reduction peaks are observed at -390 and -600 mV vs. Ag/AgCl/KCl (sat.). Those two peaks correspond to a 2-step process for the 4-electron reduction pathway of O-2 in this neutral medium.

Simple preparation method of multilayer polymer films containing Pd nanoparticles

A simple route to the fabrication of multilayer films containing Pd nanoparticles is described. Following layer-by-layer assembly of PdCl42- and polycation, QPVP-Os (a quaternized poly(4-vinylpyridine) complexed with [Os(bpy)(2)Cl](2+/+)), on 4-aminobenzoic acid-modified glassy carbon electrodes, the three-dimensional Pd nanoparticle multilayer films are directly formed on electrode surfaces via electrochemical reduction of PdCl42- sandwiched between polymers. The growth of PdCl42- is easy on electrode surfaces by electrostatic interaction, and the assembly processes are monitored by cyclic voltammetry and UV-vis spectroscopy. The depth profile analyses by X-ray photoelectron spectroscopy verify the constant composition of the Pd nanoparticle multilayer films. Atomic force microscopy proves that the as-prepared Pd nanoparticles are uniformly distributed with an average particle diameter of 3-7 mn. The resulting Pd nanoparticle multilayer-modified electrode possesses high catalytic activity for the reduction of dissolved oxygen and oxidation of hydrazine compounds in aqueous solution.

FePc结构对Pd(OAc)_2/HQ/FePc催化环己烯氧化活性的影响

在乙腈酸性水溶液中 ,不同来源酞菁铁 (FePc)和 Pd(OAc)2/HQ（氢醌）组成的催化体系在环己烯氧化反应中有明显不同的催化活性 .通过 IR、 M ssbauer、 XPS、 XRD、 SEM、 BET等技术对酞菁铁的分析表明 ,由酞菁铁组成的多组份催化体系的催化活性与酞菁铁中的μ-氧酞菁铁含量、酞菁铁结晶度和表面形态有关.

Pd(OAc)_2/HQ/FePc、Pd(OAc)_2/FePc 催化烯烃氧化合成酮的研究

考察了在乙腈酸性水溶液中Ｐｄ（ＯＡｃ）２／氢醌（ＨＱ）／酞青铁（ＦｅＰｃ）和Ｐｄ（ＯＡｃ）２／ＦｅＰｃ对环己烯、环戊烯、苯乙烯、正癸烯氧化合成相应酮的催化活性．实验结果表明，两类催化体系对环戊烯的酮基化均呈现出较高的催化活性，环戊酮收率可达９８％．在其它烯烃的氧化反应中，三元催化体系Ｐｄ（ＯＡｃ）２／ＨＱ／ＦｅＰｃ的催化活性高于二元的Ｐｄ（ＯＡｃ）２／ＦｅＰｃ．这表明，在Ｗａｃｋｅｒ类催化体系中，电子传递体的作用是很重要的．对催化体系中各组分的作用进行了讨论，并给出了可能的催化作用机理.

Pd(Ⅱ)/BQ催化环己烯氧化合成环己酮的反应机理

在乙腈的酸性水溶液中，考察了Pd（OAc）2、Pd（NO3）2、PdCl2和苯醌（BQ）组成的催化体系在环己烯氧化合成环己酮反应中的催化活性，探索了酸度对Pd（OAC）2／BQ催化活性的影响．结果表明，Pd（OAc）2／BQ和Pd（NO3）2／BQ对环乙烯氧化合成环己酮显示了较高的催化活性，而PdCl2／BQ的活性则较低，无水和无酸存在的溶液中，Pd（OAc）2／BQ对环己烯氧化未显现任何催化活性．并用紫外可见光谱（UV－Vis）、循环伏安法考察了该催化体系的作用机理

在Nd_(2-x)Sr_xNio_(4±λ)系催化剂上NO分解反应的研究

氮氧化物(NO_x)是严重的空气污染物,是产生酸雨的主要来源之一.消除NO_x已成为目前国际上环保化学中最为关键的问题之一.目前,世界各国都在大力开发新的消除NO_x的方法,其中最令人注意的有NO直接分解和寻找可取代NH_x的还原剂.根据已报道的文献看,最有希望的NO直接分解催化剂除了贵金属Pd,Pt之外有Cu-ZSM-5分子筛、含Cu的超导体Y-Ba-Cu-O和含Co的ABO_x复合氧化物.把A_2BO_4型复合氧化物应用于NO分解反应的报道很少,本文首次在NO分解反应中系统研究了Ln_(2-x)Sr_xMO_4(Ln=La,Pr,Nd,Sm,

[Ni(Phen)_3][Pd(mnt)_2]·1.25 DMF的合成与晶体结构

报道标题化合物的合成、鉴定和单晶结构.晶体中含有数量相同的两种独立的阳离子,互为对映异构体,而且这两种八面体构型阳离子的畸变程度各不相同.晶胞中还存在三种独立的阴离子.不同阳离子中的四个平面型 Phen 配体之间通过π-π相互作用发生联系,形成四聚单元,每两个四聚单元又通过与平面共轭型的阴离子之间的π-π相互作用而相连,形成一种特殊的、准一维的链状结构.

常温SnO_2-Pd气敏元件的研制

采用共沉淀方法,制备了SnO_2和Pd粉两种主要敏感材料,研制成了常温SnO_2-Pd气敏元件。该元件功耗低,小于0.1W,对H_2、煤气等灵敏、稳定,响应快,小于7s,恢复快,小于25s。讨论了SnOx(x=1～2)的结构与气敏性的关系。

Ferrocenylphosphine-imine ligands for Pd-catalyzed asymmetric allylic alkylation

Ferrocenylphosphine-imine ligands 6 derived front (R,S)-PPFNH2-R 5 and a variety of benzaldehydes were applied in the Pd-catalyzed asymmetric allylic alkylation of 1,3-diphenylprop-2-en-1-yl acetate 7a or pivalate 7b with dimethyl malonate. The substituent effects on the catalytic reaction were investigated, and 96% e.e. with 99% yield was achieved when the m-nitro substituted ligand 6k was used. (C) 2002 Elsevier Science Ltd. All rights reserved.