稀土离子在硼铝酸盐及相关基质中的VUV-Vis范围发光性质

PDP(等离子平板显示器)是一种最有前途的大屏幕壁挂式彩电,而它需要VUV激发下的高效荧光粉,同时由于VUV荧光粉也是无汞荧光灯的需求,所以研究VUV激发的稀土激活的荧光粉是实际应用的需要.对于光谱分析该工作采用了理论计算与光谱数据分析相结合的方法,对所测光谱各个谱峰进行了详细的指认.得到了以下的结论和成果:1.得到了大量的含氧酸盐中稀土离子的VUV光谱数据.2.首次系统地应用两种方法预测了三价稀土离子的f-d跃迁位置,并首次系统地通过计算预测了三价稀土离子在含氧酸盐中的电荷迁移带的位置.3.首次实验观察到Ce<'3+>的电荷迁移带,观察到了Tb<'3+>的电荷迁移带.4.在所有含Dy<'3+>的样品中都观察到Dy<'3+>的f-d跃迁.5.LaPO<,4>和ABLa(PO<,4>)<,2>(A=K,Na;B=Mg,Zn)基质中,观察到了Ce<'3+>的5个f-d跃迁,指认了Tb<'3+>的5个f-d跃迁,指认了掺杂Ce、Tb的VUV光谱中的所有谱峰.6.对所研究基质中的稀土离子的f-d跃迁和电荷迁移带进行了系统地预测和指认.7.通过总结不同稀土离子在相同基质中的VUV光谱,并参考文献的相关报导,总结了所研究基质的基质吸收位置.8.通过Eu<'3+>的灾光探针作用和ce<'3+>的发射光谱等,确证三价稀土离子在La<,2>CaB<,10>O<,19>基质中同时取代了八配位的Ca<'2+>和十配位的La<'3+>,占据了两种格位.9.合成了一种新型绿色长余辉材料,具有亮度高,余辉时间长,可用日光激发等优点.10.合成了一种UV激发下性能优异的掺Eu<'3+>的红色荧光粉,亮度可以跟商业红粉Y<,2>O<,3>:Eu相比拟,而基质材料与Y<,2>O<,3>相比降低了成本.

镍-金属氢化物电池新型负极材料研究

贮氢合金是镍一金属氢化物电池的核心材料，其综合性能的改善是提高镍一金属氢化物电池性能的关键。本研究以探索镍一金属氢化物电池新型负极材料为目的，以非ABS型贮氢合金为研究对象，采用X射线衍射、Rietveld分析、恒电流充／放电、P-C-T曲线及线性微极化等方法，从基础和潜在应用等方面详细研究了非ABS型合金的结构与电化学性能。对La-Ni体系中非ABS型二元合金的结构和电化学性能的研究表明，LaNi_(228)具有最优异的高倍率充电性能；La_2Ni_7合金电极的高倍率放电性能最佳；La_7Ni_3在低温条件下表现出较好的放电性能。然而，所有得到的La-Ni合金电极容量远低于其理论容量。因此，必须通过进一步研究，如元素取代、热处理、表面处理等来提高其电化学容量。对RENi_3（RE＝La，Ce，Pr，Nd，Sm，Gd，Th，Dy，Ho，Er，Y）研究表明：YNi_3合金因其具有最大的晶胞体积，最小的密度，而表现出最好的高倍率充／放电性能及低温放电性能，但其高温放电性能需要进一步提高，以满足实际应用的要求。用Al、Mn、Ti、Fe、Sn、Si、Cr、M。、Cu和Co十种元素取代Ni进行了大量的配方筛选工作。得到了大量的实验数据，并发现LaNi_(3.7)Al_(0.3)合金电极电化学放电容量最高，达290.8mAh／g；LaNi_(3.7)Mo_(0.3)合金电极的高倍率放电性能最好，在以4200mA/g的电流密度下进行放电时，其放电容量仍达到145.8mA/g；而I镍一金属氢化物电池新型负极材料研究镍一金属氢化物电池新型负极材料的研究Al的取代会使合金电极性能对温度不敏感。以我们的实验为基础，进一步进行合金配方的微调，具有可能开发出具有实用价值的贮氢合金的潜力。在Ar保护下用真空电弧炉熔炼合成了四种Lal一xMg：（NICoAI）3．6体系贮氢合金，制成姐卜Ni电池负极，通过恒电流充／放电方法研究了其电化学性能。结果表明：Lal一xMg：（NiCoAI）3．6体系金属氢化物电极较容易活化，室温下具有优异的高倍率放电性能，在以4200mA／g电流放电时，La卜汉gx（NICoAI）36合金电极的放电容量是ABS型合金电极的3倍，达152hah／g，显示出良好的动力学特性。R，入1兮Ni（R：raree田劝，Ca，Y）型合金因能吸引／释放1．8一1．87％质量的HZ而被认为是种很有希望的贮氢合金。但其吸／放氢平台过高，循环寿命短。如何提高Rh厦g剑19循环稳定性是这类合金能否成功商业化的关键。研究发现，Co能够显著提高ABS型合金电极的循环寿命，但其价格太贵。人们发现Al在提高电极寿命方面与C。有类似的作用，但Al元素的添加因其在碱性电解质的作用下在电极表面易生成致密的氧化膜而不利于氢的扩散，进而对高倍率放电性能不利。入物在提高电极表面活性，改善其高倍率放电性方面作用明显。本工作在前面的基础上用Al和MO联合取代Ni，以期待同时改善La一Mg一Ni一Co合金的循环稳定性和高倍率放电性能。详细研究了La07Mg03Ni切一（A105Mo05）x（x：o，0．2，0．4，0．6，0．8）系列贮氢合金的晶体结构和电化学性能。X射线衍射及Rietveld分析发现：所有La07Mg03Ni4D一x（A105Mo05）x合金均为包含PuNi3结构的六方LaZMgNig相、CaCus结构的LaNis主相及L匆Ni7，LaN儿和LaNi杂相的多相结构。合金中La（La，Mg）剑19相及LaNis相的晶格参数及晶胞体积均随合金中Al和Mo含量的增加而增大。用电化学方法测得的RC一T曲线显示：Al和'fo部分取代Ni降低了氢的平台压力。随合金中Al和Mo含量的增加，电极的电化学容量从329．7（x＝0）、徽橇毓孺鑫盆一11瀚加至365．物A吨（＝0．6）后又降低到351．3毗吨（x＝0．8）。当以1200m刀g的电流密度进行放电时，其I｛RD从62．0％沁0）增加到82．1％沁0．8）。线性微极化结果显示：Al和Mo的添加增大了合金表面的交换电流密度，因而也改善了合金电极的高倍率放电性能。另外，Al和M。取代合金中的Ni增大了氢在电极合金中的扩散系数（D），改善了La07Mgo3Ni4。一x（Alo5M。。5）x（X＝o，0．2，0．4，0．6，0．8）合金电极的低温放电性能（LTD）。

富钇稀土-铝合金制取的研究Study on Preparation of Yttrium-Rich RE-Al Alloys

我国江西龙南稀土矿是目前世界上储量最大的富钇稀土矿、研制具有多种用途的钇（Y）-铝（Al）或富钇混合稀土（Ymm）-铝中间合金，对于开拓我国龙南稀土矿的应用领域扩大稀土合金出口具有重要意义。基于这一背景并针对目前氟化物体系制取Ymm-Al合金时存在着电解温度高，腐蚀现象严重，电效偏低等缺点，本文系统开展了在氯化物熔盐体系中电解制取Ymm-Al合金的研究工作。本工作由三部分组成：在第一部分工作中，开展了熔盐电解所需要基本原料-无水稀土氯化物制取的工艺研究。利用化学分析和结构分析手段，弄清了干法氯化过程中YmmCl_3水解的机理，提出了减弱水解的措施，即YmmCl_3先在850-900 ℃灼烧1.5 + 0.2hr，脱掉吸附水并将碱式碳酸盐转化为氧化物，增加稀土氧化物的比表面。通过条件试验得到最佳工艺条件为：采用NH_4 Cl:Ymm_2 O_3 = 14:1（摩尔比）的配料比，每次投入氯化装置的原料量为0.26 - 0.36 kg, 在400-450 ℃氯化反应激烈开始后迅速降温至400 ℃以下，待物料粘结现象消失后，再行升温氯化。出料及后期控制温在475 ± 25 ℃。经过3.8 ± 0.2hr氯化，可制得水不溶物小于1%并符合熔盐电解要求的YmmCl_3原料。此新工艺与原有干法工艺相比，流程短，装置简单，不需密闭抽真空，成本低，适于制取任何量的优质熔盐电解所需氯化稀土原料。在第二部分工作中，利用上述YmmCl_3原料，以液态铝为阴极，在氯化物体系中进行熔盐电解，通过试验得出在小型试验规模制取Ymm-Al合金的最隹工艺条件为：电解质组成（重量比）40%YmmCl_3-1%NaF-59%等摩尔的NaCl-KCl；电解温度为790 ± 5 ℃；阴极电流密为0.7 - 0.02A/cm~2；电解电量为333 ± 5库仑/克铝，制得钇铝合金中Ymm含量为10 ± 2%。添加1%的NaF可消除阴极表面生成枝状物，减少合金中夹渣和熔盐中沉渣。在电解工作中，将方差分析应用于试验数据处理，方差分析结果表明，各种试验因素对电效有明显影响，试验数据可靠，试验误差在允许范围以内。在第三部分工作中，利用线性扫描伏安法测定了在最隹电解工艺条件下Y~（3+）和Ymm在液态铝及钼电极上的析出电位。测定结果表明：Y~（3+）和Ymm~（3+）在液态铝阴极上的析出电位比在钼阴极上偏正0.2 ～ 0.8伏，氟离子的加入要比不加氟时析出电位不有同程度的负移，但考虑到氟离了具有消渣作用，加入少量氟比物添加剂对提高电效有利。

Correlation of electrical and optical properties in dually Cd+ and N+ ion-implanted GaAs

Cd in GaAs is an acceptor atom and has the largest atomic diameter among the four commonly-used group-II shallow acceptor impurities (Be, Mg, Zn and Cd). The activation energy of Cd (34.7 meV) is also the largest one in the above four impurities, When Cd is doped by ion implantation, the effects of lattice distortion are expected to be apparently different from those samples ion-implanted by acceptor impurities with smaller atomic diameter. In order to compensate the lattice expansion and simultaneously to adjust the crystal stoichiometry, dual incorporation of Cd and nitrogen (N) was carried out into GaAs, Ion implantation of Cd was made at room temperature, using three energies (400 keV, 210 keV, 110 keV) to establish a flat distribution, The spatial profile of N atoms was adjusted so as to match that of Cd ones, The concentration of Cd and N atoms, [Cd] and [N] varied between 1 x 10(16) cm(-3) and 1 x 10(20) cm(-3). Two type of samples, i.e., solely Cd+ ion-implanted and dually (Cd+ + N+) ion-implanted with [Cd] = [N] were prepared, For characterization, Hall effects and photoluminescence (PL) measurements were performed at room temperature and 2 K, respectively. Hall effects measurements revealed that for dually ion-implanted samples, the highest activation efficiency was similar to 40% for [Cd] (= [N])= 1 x 10(18) cm(-3). PL measurements indicated that [g-g] and [g-g](i) (i = 2, 3, alpha, beta,...), the emissions due to the multiple energy levels of acceptor-acceptor pairs are significantly suppressed by the incorporation of N atoms, For [Cd] = [N] greater than or equal to 1 x 10(19) cm(-3), a moderately deep emission denoted by (Cd, N) is formed at around 1.45-1.41 eV. PL measurements using a Ge detector indicated that (Cd, N) is increasingly red-shifted in energy and its intensity is enhanced with increasing [Cd] = [N], (Cd, N) becomes a dominant emission for [Cd] = [N] = 1 x 10(20) cm(-3). The steep reduction of net hole carrier concentration observed for [Cd]/[N] less than or equal to 1 was ascribed to the formation of (Cd, N) which is presumed to be a novel radiative complex center between acceptor and isoelectronic atoms in GaAs.

Growth of 0.55eV-GaInAsSb Quaternary Alloy Films for a Thermophotovoltaic Device by Liquid Phase Epitaxy

Lattice matched Ga_(1-x)In_xAs_ySb_(1-y) quaternary alloy films for thermophotovoltaic cells were successfully grown on n-type GaSb substrates by liquid phase epitaxy. Mirror-like surfaces for the epitaxial layers were achieved and evaluated by atomic force microscopy. The composition of the Ga_(1-x)In_xAs_ySb_(1-y) layer was characterized by energy dispersive X-ray analysis with the result that x = 0.2, y = 0.17. The absorption edges of the Ga_(1-x)In_xAs_ySb_(1-y) films were determined to be 2. 256μm at room temperature by Fourier transform infrared transmission spectrum analysis, corresponding to an energy gap of 0.55eV. Hall measurements show that the highest obtained electron mobility in the undoped p-type samples is 512cm2~/(V·s) and the carrier density is 6. 1×10~(16)cm~(-3) at room temperature. Finally, GaInAsSb based thermophotovoltaic cells in different structures with quantum efficiency values of around 60% were fabricated and the spectrum response characteristics of the cells are discussed.

Energy band and acceptor binding energy of GaN and AlxGa1-xN

The hole effective-mass Hamiltonian for the semiconductors of wurtzite structure is established, and the effective-mass parameters of GaN and AlxGa1-xN are given. Besides the asymmetry in the z and x, y directions, the linear term of the momentum operator in the Hamiltonian is essential in determining the valence band structure, which is different from that of the zinc-blende structure. The binding energies of acceptor states are calculated by solving strictly the effective-mass equations. The binding energies of donor and acceptor for wurtzite GaN are 20 and 131, 97 meV, respectively, which are inconsistent with the recent experimental results. It is proposed that there are two kinds of acceptors in wurtzite GaN. One kind is the general acceptor such as C, substituting N, which satisfies the effective-mass theory, and the other includes Mg, Zn, Cd etc., the binding energy of which deviates from that given by the effective-mass theory. Experimentally, wurtzite GaN was grown by the MBE method, and the PL spectra were measured. Three main peaks are assigned to the DA transitions from the two kinds of acceptor. Some of the transitions were identified as coming from the cubic phase of GaN, which appears randomly within the predominantly hexagonal material. The binding energy of acceptor in ALN is about 239, 158 meV, that in AlxGa1-xN alloys (x approximate to 0.2) is 147, 111 meV, close to that in GaN. (C) 2000 Published by Elsevier Science S.A. All rights reserved.

川西地区几种优势苔藓植株元素含量及其时空差异性

揭示苔藓植株元素含量及其时空差异性是深入开展利用苔藓植物指示环境和筛选理想监测藓种的科学基础。采用微波消解（ICP-AES）方法对九寨沟自然遗产地原始林景点停车场周围三个采样带：I为停车场植被小岛（PS），向外约120 m半径为II带（D120），再向外距离约1,000 m为III带（D1000）和3个方向上的大羽藓和毛尖青藓2种苔藓中13种元素（A1, S, Ca, P, Cu, Fe, K, Mg, Mn, Pb, Ni,Zn和Cd）含量进行了测定和比较，并对采自边坡方向（PS-3）上2005和2007年的4种苔藓植物（南木藓、大羽藓、平藓和厚角絹藓）也进行了13种元素含量的测定和比较。同时对九寨沟自然遗产地、黄龙自然遗产地、夹金山和梦笔山的冷杉原始林4个地区的3种苔藓中（大羽藓、锦丝藓和塔藓）的A1、Ca、Cu、Fe、K、Mg、P、Zn、C和N 10种元素含量进行测定和比较。 对大羽藓和毛尖青藓2种苔藓植物内13种元素的测定发现：1）同种苔藓对不同元素的富集能力不同。A1、Ca、K、Mg和P的元素含量在苔藓中的富集较其他元素的要高。2）不同种苔藓植物对同种元素的富集能力不同，毛尖青藓较大羽藓能够监测出更多的元素；对于被检测出的元素，毛尖青藓监测出的累积量大于大羽藓，其中累积量最大的元素是Ca为10 874.286 μg.g-1.year-1，最小的是Cu元素为5.438 μg.g-1.year-1。对05年和07年的平藓、大羽藓、南木藓和厚角絹藓元素含量的测定表明：元素在两年中的积累量是不同的。综合分析表明，苔藓生物监测方法可有效监测景点停车场机动车尾气中排放出的典型元素（如Cu、Pb、Ni、Zn、Cd等）含量，而毛尖青藓较大羽藓能更可靠的监测九寨沟自然遗产地单景点汽车尾气金属元素种类及其排放量。 对4个地区3种苔藓10种元素监测发现：1）Ca、Mg、Zn、K和Cu元素在黄龙地区的含量高于在其它地区的含量；P元素在梦笔山地区的含量为最高；Fe和Al元素在夹金山地区的含量高于在其它地区的含量。2）C元素在其它因素一致的情况下，进行不同年龄间的元素含量比较，结果显示元素含量在各年龄间并不存在明显的差异性；N元素含量与年龄的差异出现在黄龙林下及林窗的塔藓、九寨沟林下的锦丝藓及塔藓和梦笔山的塔藓中，而在锦丝藓中未出现元素含量与年龄的差异性；塔藓能检测出更多的元素种类其含量与年龄间存在显著差异，锦丝藓检测到的元素种类次之；除锦丝藓（锦丝藓在林窗中几乎检测不到元素含量与年龄间的差异性）外，其他两种藓在林窗中能检测出的元素种类大于在林下的检测种类。3）元素含量与生境间存在差异性的元素分别有：黄龙大羽藓中的Ca、P和Mg元素；九寨锦丝藓中的Zn元素；夹金山塔藓中的Al、Fe和Zn元素；梦笔山大羽藓中的Al、Fe和Mg元素及锦丝藓中的Ca元素。4）区域、年龄和生境因素对苔藓植株元素含量均达到了显著水平，但两两之间及三者之间的交互作用由于元素种类的不同存在差异。综合分析表明，苔藓植物中的元素含量受年龄、区域的影响较生境的更大。 The revelation of mosses elements content and its spatiotemporal differences is the scientific foundation of moss monitoring. To determine the feasibility of moss monitoring metal depositions derived from travel bus emiss ions in scenic spot, we collected one year-growth samples of two mosses Brachythecim piligerum and Thuidium cymbifolium with different distance (island center, 120m，1000m ) and different direction (north, south and east) far from parking site island from Yuanshilin Spot at Jiuzhaigou World Nature Heritage in the Western Sichuan of China and determined thirteen element （A1, S, Ca, P, Cu, Fe, K, Mg, Mn, Pb, Ni, Zn, Cd）contents by ICP-AES analysis method. And picked 4 kinds of mosses (Macrothamnium macrocarpu m（Reinw. etHornsch.）Fleisch.，Thuidium cymbifolium，Entodon concinnus (De Not.) Par., Neckera pennata) from the direction PS-3 in 2005 and 2007, determined 13 element contents. Collected 3 kinds of moss (Thuidium cymbifo lium, Actinothuidium Hookeri (Mitt.) and Hyolcomium splendens (Hedw.) from Jiuzhaigou natural heritage, Huanglong natural heritage, Mt. Jiajin and Mt. Mengbi in primeval forest with two habitat (undergrowth and forest gap), determined element contents of A1, Ca, Cu, Fe, K, Mg, P, Zn, C and N. We found that, 1) The elements content are difference in same type of moss. Content of A1, Ca, K, Mg and P are higher than others. 2) While the contents of A1, S, Ca, P, Cu, Fe, K and Zn had significant correlation with the different distances from parking site, the nearer the distance was, the more accumulation was; 2) Comparing to Thuidium cymbifolium, Brachythecium piligerum can test more elements which contents show the significant correlation with distances. And Brachythecium piligerum can have greater element accumulation than Thuidium cymbifolium. The element contents in two years (2005 and 2007) are different. The present study found that moss can reliably bio-indicate metal deposition from traffic emissions in one scenic spot and Brachythecium piligerum is a good moss for bio-indicating element content from traffic emissions at Jiuzhaigou World natural Heritage. Determined the 10 element contents in 4 areas through 3 kinds of moss we found that, 1) Ca, Mg, Zn, K and Cu element content is higher in the Huanglong area than in other areas, The P element content in Mt. Jiajin is higher than other areas, Fe and Al element content is higher in the Mt. Jiajin than in other areas. 2) The content of C had no significant correlation with age. As for N, this significant correlation found in Hyolcomium splendens (Hedw.) with 2 habitat in Huanglong, Actinothuidium Hookeri (Mitt.) and Hyolcomium splendens (Hedw.) with undergrowth in Jiuzhai, Hyolcomium splendens (Hedw.) in Mt. Mengbi. The types of elements which content showt he significant correlation are most in Hyolcomium splendens (Hedw.) and least in Thuidium cymbifolium. Except Actinothuidium Hookeri (Mitt.), the types of elements that content had significant correlation with age in forest gap are more than in undergrowth. 3) The elements which content had significant correlation with habitat are P, Ca and Mg in Thuidium cymbifolium in Huanglong, Zn in Actinothuidium Hookeri (Mitt.) in Jiuzhai, Al, Fe and Zn in Hyolcomium splendens (Hedw.) in Mt. Jiajin, in Mt. Mengbi Al, Fe and Mg in Thuidium cymbifolium and Ca in Actinothuidium Hookeri (Mitt.). 4）The region, the age and the habitat factor has coeffect element content. The correlationship between element contents and the age, the region is closer than habitat.

Microstructures and mechanical properties of as-cast Mg–5Al–0.4Mn–xNd (x=0, 1, 2 and 4) alloys

Mg-5Al-0.4Mn-xNd (x=0, 1, 2 and 4wt.%) alloys were prepared by metal mould casting method. The microstructures and mechanical properties were investigated. The results demonstrated that Al11Nd3 phase was formed and mainly aggregated along the grain boundaries with the addition of Nd. Meanwhile, the grain sizes were greatly reduced with the increasing Nd content.

Investigations of the properties of Mg-5Al-0.3Mn-xCe (x=0-3, wt.%) alloys

Mg-5Al-0.3Mn-xCe (x = 0-3, wt.%) alloys were prepared by metal mould casting method. The microstructures and mechanical properties were investigated. The results revealed that the main phases of as-cast Mg-5Al-0.3Mn alloy consist of alpha-Mg matrix and beta-Mg17Al12 phase. With the addition of Ce element, Al11Ce3 precipitates were formed and mainly aggregated along the grain boundaries. The amount of the Al11Ce3 precipitates increased with increasing addition of Ce, but the amount of beta-Mg17Al12 phase decreased. The highest tensile strength was obtained in Mg-5Al-0.3Mn-1.5Ce alloy. The ultimate tensile strength (UTS), yield strength (YS) and elongation at room temperature are 203 MPa, 88 MPa and 20%, separately.

Charge carrier transporting, photoluminescent, and electroluminescent properties of zinc(II)-2-(2-hydroxyphenyl)benzothiazolate complex

Zinc(II)-2-(2-hydroxyphenyl)benzothiazolate complex is an excellent white-light-emitting material. Despite some studies devoted to this complex, no information on the real origin of the unusually broad electroluminescent (EL) emission is available. Therefore, we investigate photoluminescent and EL properties of the zinc complex. Orange phosphorescent emission at 580 nm was observed for the complex in thin film at 77 K, whereas only fluorescent emission was obtained at room temperature. Molecular orbitals, excitation energy, and emission energy of the complex were investigated using quantum chemical calculations. We fabricated the device with a structure of ITO/F16CuPc(5.5 nm)/Zn-complex/Al, where F16CuPc is hexadecafluoro copper phthalocyanine. The EL spectra varied strongly with the thickness of the emissive layer. We observed a significant change in the emission spectra with the viewing angles. Optical interference effects and light emission originating both from fluorescence and from phosphorescence can explain all of the observed phenomena, resulting in the broad light emission for the devices based on the Zn complex. We calculated the charge transfer integral and the reorganization energy to explain why the Zn complex is a better electron transporter than a hole transporter.

A mechanistic study of electrochemical oxidation processes of (OEP)Mg(II) in the presence of anions

In the presence of F-, OH-, Cl-, electrochemical redox of (OEP)Mg(II) [2,3, 7,8,12,13,17,18 octaethyl-21H, 23H-porphine magnesium (II)] are investigated in DCE/0.1 mol/L solution by cyclic voltammetry and spectroelectrochemistry, In the presence of anions, anions are axially coordinated to (OEP)Mg(II) generate (OEP)Mg(II)Y, the E-1/2 of (OEP)MS(II)Y oxidation are negatively shifted. A chemical reaction following the second oxidation step is observed, the E-1/2 of the reaction product is obtained. Mechanism of (OEP)Mg(II) in the halogen and OH- anions titration process has been proposed.

电感耦合等离子体原子发射光谱测定混合稀土铜合金中稀土和非稀土元素

本文提出了用电感耦合等离子体原子发射光谱(ICP—AES)法直接测定混合稀土铜合金中13个非稀土和稀土元素。选用了合适的分析线对及ICP光源的工作参数。探讨了观察高度、功率、酸度、载气和基体量的变化对被测元素谱线强度的影响。不用化学分离,可一次同时测定La、Ce、pr、Nd、Sm、Sn、Zn、Fe、Al、Ni、Pb,Mg和Mn。测定范围(％):La_2O_3:0.096～6.4;CeO_2:0.24～16;Pr_6O_(11):0.0384～2.56;Nd_2O_3:0.096～6.4;Sn:0.096～3.2;Mg、Mn、Fe,Sm_2O_3:0.024～1.6;Zn:0.396～6.7;Pb:0.092～6.4;Ni:0.096～3.2;Al:0.0384～1.28。相对标准偏差±3.0～9.1％;回收率85～116％满足冶炼上的要求,得到了满意的结果。

南黄海重金属的演变特征及控制因素

本文以南黄海1997～2006年10年表层海水和沉积物中重金属为主要研究对象，同时结合对生态环境信息的综合分析，系统探讨了海水和沉积物中重金属的生物地球化学特征、影响控制因素、演变趋势，并对海域生态风险进行了评估，获得了以下一系列新的结果和认识： 1．系统获得了南黄海海水和沉积物中重金属的地球化学分布模式，揭示了影响和控制其生物地球化学特征的因素 南黄海表层海水中重金属As、Cd、Cu、Hg、Pb、Zn的平均浓度分别为2.33、0.078、1.41、0.0036、0.37、6.21 μg/L，低于其它中国近海海水，而高于水交换较好的深海；表层海水重金属的分布模式（除Pb外）表现为在离岸较远的南黄海中部地区其含量较低，而近岸海区则普遍含量较高，区域分布呈现“高Cd-Cu-Hg-Zn区”，“高Pb-Cu-Zn区”以及“高Pb区”三个地球化学分区。 南黄海表层沉积物中重金属比邻近海域沉积物中的浓度低，南黄海重金属主要受沉积物粒度控制，即在细粒度高的南黄海中部区域重金属（除As外）的含量较高，粗粒度的近岸区则较低，区域分布呈现“高Cd-Cu-Pb-Zn区”，“高Hg低As-Cu-Zn区”以及“高As低Cd-Hg-Zn区”三个地球化学分区。 人类活动已经显著影响了南黄海海水中重金属的含量水平，重金属分布是径流、大气沉降、pH、盐度和重金属自身性质等各种影响因子耦合的结果。沉积物重金属的富集因子Pb>As>Hg>Cd>Zn>Cr>Cu，其中Pb和As主要来自人为污染排放，污染状况相对较重，Cr和Cu几乎没有受到人为污染的影响。沉积物的粒度是控制表层沉积物重金属分布的最主要因素，次要的因素包括沉积物有机质的含量、沉积速率以及重金属存在形态等。 2．首次获得了南黄海海水和沉积物中重金属的演变趋势 近10年来南黄海表层海水中，Zn呈上升趋势，As、Cd、Cu、Pb基本稳定变化不大，而Hg则呈略下降趋势。Zn的线性上升趋势明显，在近岸水域和中央水域中其浓度和公元年的统计关系分别为y=0.9524x+0.0034（R=0.97）和y=0.8622x+0.0299（R=0.95）（其中y为Zn的浓度，x为年度，取1997～2004）。近10年沉积物中重金属年际变化较小，浓度变化在多年均值的±（10%～30%）之间变动。As、Cd、Cu、Hg、Pb、Zn的均值变化范围分别为7.17±1.70、0.108±0.024、17.61±1.65、0.024±0.008、18.44±4.26、70.53±5.73 mg/kg，除了Hg随公元年呈较好的线性增加（y=0.0033x-6.50，R=0.75）外，其它重金属未显现出有明显的演变趋势。 近百年来，南黄海重金属的变化可分为3个阶段，20世纪60年代以前，20世纪60年代至90年代，及20世纪90年代至今。第一个阶段的60年可以看作是南黄海未明显受人类活动影响的一个时期，该段时期内明显的特征是重金属含量的变化受径流输入不均等多种因素影响，变化规律性不强；第二阶段是南黄海近岸工农业迅猛发展的阶段，由近岸传输到这一海域的重金属量增加，南黄海沉积物重金属浓度增加，沉积物质量有下降的趋势，这一阶段是人类活动影响南黄海最为明显的一个阶段；第三个阶段是20世纪90年代至今，南黄海沉积物重金属浓度呈降低趋势，与中韩两国减排及治污措施有关。近几年，南黄海沉积物的环境质量较20世纪末期有了较明显的改善。 3. 初步阐明了南黄海重金属的环境污染危害和潜在生态风险 采用潜在生态危害指数法和地积累指数等方法对南黄海沉积环境进行分析，结果表明，中等重金属污染程度海区占研究海区面积的38.7%，中等生态风险的区域则占了研究海区面积77.8%，但均未发现沉积物中的重金属与生物量的分布有明显的关系，总体表明，南黄海沉积物中的重金的污染状况及生态风险较低，南黄海沉积物质量良好。