利用比较染色体涂色和BAC定位技术探讨麂属动物染色体的起源和演化

比较细胞遗传学研究发现物种的形成过程往往伴随着核型结构的变化，各种鹿属动物染色体的巨大差异正是很好的例证'赤魔的染色体被证明是由具有端着丝粒的祖先染色体经过多次的串联融合进化而来的。根据祖先染色体的形态和连接方式，可以将染色体串联融合主要分为三类：着丝粒一着丝粒融合，着丝粒一端粒融合和端粒一端粒融合。经典细胞遗传学，比较染色体涂色，卫星DNA序列和部分融合位点序列比较研究都支持串联融合假说。但串联融合的类型和分子机制迄今没有完全弄清楚。本论文旨在对魔属动物的串联融合类型和分子机制进行研究，分为两个部分：一、通过比较染色体涂色的方法，建立小鹿一林察一大额牛的比较染色体图谱，结合以前发表的结果来阐明鹿科（小魔）与牛科（大额牛），寮科（林磨）之间的核型关系；二、建立赤鹿的全基因组BAc文库，通过克隆定位的方法确立在赤魔的染色体进化过程中所发生的串联融合类型，并对其机制进行探讨。主要结果如下：利用小鹿的染色体特异探针与林寮，大额牛的染色体进行杂交，首次建立了小鹿一大额牛，小魔一林察的核型对比关系。结果显示小鹿的1-5、11号染色体均与林集和大额牛的多段染色体同源。结合高分辨的G带比较，发现小魔1-5和11号染色体上的与林爵和大额牛对应的所有同源片断在小鹿染色体上呈着丝粒一端粒连接排列。从而进一步证明小鹿的1-5和11号染色体是由2n=70的祖先核型通过染色体的着丝粒一端粒串联融合方式进化而来的。建立了我国第一个赤魔全基因组BAC文库，该文库由124800个克隆组成。大部分插入片段的大小在100-145kb之间，片段的平均大小为12＜0kb。克隆定位显示克隆的分布与小鹿染色体大小成正比关系，说明整个文库没有染色体的偏倚，文库为整个基因组的6倍，覆盖率几乎为100％。通过赤鹿BAC克隆在小魔和赤鹿染色体上的精确定位，使我们得以准确判断小鹿染色体在赤鹿染色体同源片段上的连接方式，并确定串联融合的类型。结果进一步支持赤鹿的核型是由一个2n=70祖先核型通过着丝粒一端粒的融合方式进化而来的。

Self-assembled monolayer growth of phospholipids on hydrophobic surface toward mimetic biomembranes: Scanning probe microscopy study

Atomic force microscopy (AFM) and lateral force microscopy (LFM) were used simultaneously to analyze a model membrane bilayer structure consisting of a phospholipid outer monolayer deposited onto organosilane-derivatized mica surfaces, which were constructed by using painting and self-assembly methods. The phospholipid used as outer monolayer was dimyristoylphosphatidylcholine (DMPC). The hydrocarbon-covered substrate that formed the inner half bilayer was composed of a self-assembly monolayer (SAM) of octadecyltrichloroorganosilane (OTS) on mica. SAMs of DMPC were formed by exposing hydrophobic mica to a solution of DMPC in decane/isobutanol and subsequently immersing into pure water. AFM images of samples immersed in solution for varying exposure times showed that before forming a complete monolayer the molecules aggregated into dense islands (2.2-2.6 nm high) on the surface. The islands had a compact and rounded morphology. LFM, coupled with topographic data obtained with the atomic force mode, had made possible the distinction between DMPC and OTS. The rate constant of DMPC growth was calculated. This is the first systematic study of the SAM formation of DMPC by AFM and LFM imaging. It reveals more direct information about the film morphology than previous studies with conventional surface analytical techniques such as infrared spectroscopy, X-ray, or fluorescence microscopy.

Supported phospholipid membranes: Comparison among different deposition methods for a phospholipid monolayer

Supported lipid membranes consisting of self-assembled alkanethiol and lipid monolayers on gold substrates could be produced by three different deposition methods: the Langmuir-Blodgett (L-B) technique, the painted method, and the paint-freeze method, By using cyclic voltammetry, chronoamperometry/chronocoulometry and a.c. impedance measurements, we demonstrated that lipid membranes prepared by these three deposition methods had obvious differences in specific capacitance, resistance and thickness. The specific capacitance of lipid membranes prepared by depositing an L-B monolayer on the alkanethiol alkylated surfaces was 0.53 mu Fcm(-2), 0.44 mu Fcm(-2) by the painted method and 0.68 mu Fcm(-2) by the paint-freeze method. The specific conductivity of lipid membranes prepared by the L-B method was over three times lower than that of the painted lipid membranes, while that of the paint-freeze method was the lowest. The difference among the three types of lipid membranes was ascribed to the influence of the organic solvent in lipid films and the changes in density of the films. The lipid membranes prepared by the usual painted method contained a trace amount of the organic solvent. The organic solvent existing in the hydrocarbon core of the membrane reduced the density of the membrane and increased the thickness of the membrane. The membrane prepared by depositing an L-B monolayer containing no solvent had higher density and the lowest fluidity, and the thickness of the membrane was smaller. The lipid membrane prepared by the paint-freeze method changed its structure sharply at the lower temperature. The organic solvent was frozen out of the membrane while the density of the membrane increased greatly. All these caused the membrane to exist in a ''tilted'' state and the thickness of this membrane was the smallest. The lipid membrane produced by the paint-freeze method was a membrane not containing organic solvent. This method was easier in manipulation and had better reproducibility than that of the usual painting method and the method of forming free-standing lipid film. The solvent-free membrane had a long lifetime and a higher mechanical stability. This model membrane would be useful in many areas of scientific research.

两种超微细矿物粉体材料的制备及应用研究

Superfine mineral materials are mainly resulted from the pulverization of natural mineral resources, and are a type of new materials that can replace traditional materials and enjoy the most extensive application and the highest degree of consumption in the present day market. As a result, superfine mineral materials have a very broad and promising prospect in terms of market potential. Superfine pulverization technology is the only way for the in-depth processing of most of the traditional materials, and is also one of the major means for which mineral materials can realize their application. China is rich in natural resources such as heavy calcite, kaolin, wollastonite, etc., which enjoy a very wide market of application in paper making, rubber, plastics, painting, coating, medicine, environment-friendly recycle paper and fine chemical industries, for example. However, because the processing of these resources is generally at the low level, economic benefit and scale for the processing of these resources have not been realized to their full potential even up to now. Big difference in product indices and superfine processing equipment and technologies between China and advanced western countries still exists. Based on resource assessment and market potential analysis, an in-depth study was carried out in this paper about the superfine pulverization technology and superfine pulverized mineral materials from the point of mineralogical features, determination of processing technologies, analytical methods and applications, by utilizing a variety of modern analytical methods in mineralogy, superfine pulverization technology, macromolecular chemistry, material science and physical chemistry together with computer technology and so on. The focus was placed on the innovative study about the in-depth processing technology and the processing apparatus for kaolin and heavy calcite as well as the application of superfine products. The main contents and the major achievements of this study are listed as follows: 1. Superfine pulverization processing of mineral materials shall be integrated with the study of their crystal structures and chemical composition. And special attention shall be put on the post-processing technologies, rather than on the indices for particle size, of these materials, based on their fields of application. Both technical feasibility and economic feasibility shall be taken into account for the study about superfine pulverization technologies, since these two kinds of feasibilities serve as the premise for the industrialized application of superfine pulverized mineral materials. Based on this principle, preposed chemical treatment method, technology of synchronized superfine pulverization and gradation, processing technology and apparatus of integrated modification and depolymerization were utilized in this study, and narrow distribution in terms of particle size, good dispersibility, good application effects, low consumption as well as high effectiveness of superfine products were achieved in this study. Heavy calcite and kaolin are two kinds of superfine mineral materials that enjoy the highest consumption in the industry. Heavy calcite is mainly applied in paper making, coating and plastics industries, the hard kaolin in northern China is mainly used in macromolecular materials and chemical industries, while the soft kaolin in southern China is mainly used for paper making. On the other hand, superfine pulverized heavy calcite and kaolin can both be used as the functional additives to cement, a kind of material that enjoys the biggest consumption in the world. A variety of analytical methods and instruments such as transmission and scanning electron microscopy, X-ray diffraction analysis, infrared analysis, laser particle size analysis and so on were applied for the elucidation of the properties and the mechanisms for the functions of superfine mineral materials as used in plastics and high-performance cement. Detection of superfine mineral materials is closely related to the post-processing and application of these materials. Traditional detection and analytical methods for superfine mineral materials include optical microscopy, infrared spectral analysis and a series of microbeam techniques such as transmission and scanning electron microscopy, X-ray diffraction analysis, and so on. In addition to these traditional methods, super-weak luminescent photon detection technology of high precision, high sensitivity and high signal to noise ratio was also utilized by the author for the first time in the study of superfine mineral materials, in an attempt to explore a completely new method and means for the study of the characterization of superfine materials. The experimental results are really exciting! The innovation of this study is represented in the following aspects: 1. In this study, preposed chemical treatment method, technology of synchronized superfine pulverization and gradation, processing technology and apparatus of integrated modification and depolymerization were utilized in an innovative way, and narrow distribution in terms of particle size, good dispersibility, good application effects, low consumption as well as high effectiveness of superfine products were achieved in the industrialized production process*. Moreover, a new modification technology and related directions for producing the chemicals were invented, and the modification technology was even awarded a patent. 2. The detection technology of super-weak luminescent photon of high precision, high sensitivity and high signal to noise ratio was utilized for the first time in this study to explore the superfine mineral materials, and the experimental results can be compared with those acquired with scanning electron microscopy and has demonstrated its unique advantages. It can be expected that further study may possibly help to result in a completely new method and means for the characterization of superfine materials. 3. During the heating of kaolinite and its decomposition into pianlinite, the diffraction peaks disappear gradually. First comes the disappearance of the reflection of the basal plane (001), and then comes the slow disappearance of the (hkl) diffraction peaks. And this was first discovered during the experiments by the author, and it has never before reported by other scholars. 4. The first discovery of the functions that superfine mineral materials can be used as dispersants in plastics, and the first discovery of the comprehensive functions that superfine mineral materials can also be used as activators, water-reducing agents and aggregates in high-performance cement were made in this study, together with a detailed discussion. This study was jointly supported by two key grants from Guangdong Province for Scientific and Technological Research in the 10th Five-year Plan Period (1,200,000 yuan for Preparation technology, apparatus and post-processing research by using sub-micron superfine pulverization machinery method, and 300,000 yuan for Method and instruments for biological photon technology in the characterization of nanometer materials), and two grants from Guangdong Province for 100 projects for scientific and technological innovation (700,000 yuan for Pilot experimentation of superfine and modified heavy calcite used in paper-making, rubber and plastics industry, and 400,000 yuan for Study of superfine, modified wollastonite of large length-to-diameter ratio).

艺术学生的感觉寻求人格比较研究

High sensation seekers have unusual creativities. Recent years Furnham Adrian et al, found that the groups have different arts tendency have higher difference in Sensation seeking dimension than in Big 5. Some studies found arts students have higher level in many dimension. Sensation seeking has an important influence to peoples` aesthetic conception. This thesis measured art (including painting, music, dancing) students and non-art students` trait of sensation seeking Personality, and looked for the similarities and differences between art students and non-art students in development of sensation seeking personality. Try to find the influence of different procession of art study to sensation seeking level. The outcome of this study: 1. In non-art students, sensation seeking level has a decrease from Grade 1 to Grade 3 in college students, especially in males. Male has higher sensation seeking level than female, especially in TAS, DIS and GEN. 2. There are differences between art students and non-art students in sensation seeking. In ES and GEN Painting students have higher level than non-art students, but in TAS dancing students have lower level than non-art students, in BS students studied in music have lower level than non-art students. 3. Tendency of arts development in art students and non-art students has difference from grade 1 to grade 3. Tendency in non-art students has a decrease, but in art students is not so obviously. The developments in TAS、ES、GEN of painting students, in ES、BS、GEN of dancing students, in TAS、ES、GEN of music major students have differences towards to non-art students. Different art studies have possibility to improve opening of experiment and normal sensation seeking level. All the Different art kinds may affect the development of ES and GEN, and ES and GEN may become commonness gradually within all kind art groups. But this commonness is not so notable in Grade 1-3. 4. Between different art kinds have differences. TAS Scores of dancing group is notably lower than scores of music and painting groups, score of painting group in ES BS and GEN is remarkably higher than that of music and dancing groups, and painting group in DIS has a higher score than music group and dancing group. Painting group has highest sensation seeking in all art kinds students, and dancing group has lowest score in TAS. 5. For female, development tendency of all art kinds dimensions have no remarkable difference, except DIS. Interaction in female DIS dimension may be aroused by scores increase of painting group. In other scores development tendency of different kinds arts have no notable difference.