场发射(FED)用荧光粉的研制与改性

场发射平板显示器（Field Emission Displays, FED）是一种新发展起来的平板显示器，由于其在亮度、视角、响应时间、工作温度范围、能耗等方面具有优良的特性，成为近年新型显示器研究的热点之一。为实现高效的FED红、绿、蓝全色显示，荧光粉在其中起着十分重要的作用。制备性能优良的场发射用彩色荧光粉是决定将来FED技术成功与否的关键因素之一。 本论文研究的内容包括场发射(FED)用荧光粉的研制和改性工作。在场发射(FED)用荧光粉研制方面，采用溶胶-凝胶方法，制备了一系列新型场发射(FED)用荧光粉，包括稀土离子激活的镓酸镧 [(LaGaO3: Re3+ (Re = Eu, Tb, Dy, Tm, Sm)]体系、铟酸钙[(CaIn2O4: Re3+ (Re = Eu, Pr, Tb, Dy,)]体系、铟酸锶[(SrIn2O4: Re3+ (Re = Pr, Tb, Dy)]体系、镓酸镥[Lu3Ga5O12:Re3+ (Re = Eu, Tb，Pr)]体系，并研究了Pr, Sm, Eu, Tb, Dy, Tm等稀土离子在这些基质中的光致发光、低压阴极射线发光性质和能量传递等性质。在荧光粉的改性方面，采用喷雾热解法制备了Sr2CeO4球形场发射用荧光粉，研究了喷雾前驱体溶液中，聚乙二醇浓度、金属离子浓度、烧结温度对形貌及发光性能的影响；采用溶胶－凝胶方法成功将SiO2表明包覆一层CaTiO3:Pr3+, Y3Al5O12:Ce3+/Tb3+荧光粉，得到单分散，球形形貌，分布均匀，具有核/壳结构的球形荧光粉；另外研究了不同的制备方法对Ga2O3:Dy3+荧光粉的发光性能的影响。所得样品用XRD、FTIR、SEM、TEM、漫反射光谱、光致发光(PL)光谱、荧光寿命曲线、低压阴极射线(CL)光谱等进行表征。 在紫外光激发下，稀土离子激活的镓酸镧彩色荧光粉有基质(LaGaO3)的发射和稀土离子(Eu3+, Tb3+, Dy3+, Tm3+, Sm3+)的特征发射，研究表明在基质和稀土离子之间存在能量传递，其能量传递效率因离子而异。在阴极射线激发下，样品仅有稀土离子(Eu3+, Tb3+, Dy3+, Tm3+, Sm3+)的特征发射。如：LaGaO3: Eu3+发红光，LaGaO3: Dy3+发白光，LaGaO3: Tm3+发蓝光，LaGaO3: Sm3+发黄光，LaGaO3: Sm3+,Tb3+发白光。LaGaO3: Tb3+的发光颜色可通过不同Tb3+的掺杂浓度从蓝光到绿光进行调控。在相同的激发条件下，所制备的蓝光发射的LaGaO3: Tb3+和LaGaO3: Tm3+荧光粉与商业FED用蓝粉(Y2SiO5: Ce3+，日亚化学工业株式会社，NP-1047)相比具有更好的色纯度和更高的发光效率；所制备的黄光发射的LaGaO3: Sm3+荧光粉与商业低压黄色荧光粉((Zn,Cd)S: Ag，日亚化学工业株式会社，NP-1020)相比，色纯度接近，但具有更高的发光效率。并首次实现了单一基质中白光发射(LaGaO3: Sm3+,Tb3+), 所制备的稀土离子激活的镓酸镧彩色荧光粉[(LaGaO3: Re3+ (Re = Eu, Tb, Dy, Tm, Sm )]在场发射器件有潜在的应用。 在稀土离子掺杂的Sr/CaIn2O4荧光粉体系中，在基质Sr/CaIn2O4和掺杂离子Pr3+/Tb3+/Dy3+存在高效能量传递。基质Sr/CaIn2O4吸收能量向激活离子Pr3+/ Tb3+/Dy3+传递，发射为稀土离子Pr3+/Tb3+/Dy3+的特征发射，发光强度、荧光寿命等符合应用要求，在低压电子束激发下，Sr/CaIn2O4: Pr3+/Tb3+/Dy3+荧光粉为稀土离子的特征发射，其低压阴极射线发光(CL)光谱与光致发光(PL)发射光谱一致，CL强度随激发电压，电流密度增加而增强。 对于CaIn2O4:Eu3+荧光粉，进一步研究表明CaIn2O4:Eu3+荧光粉的光致发光和阴极射线发光颜色可以通过掺杂不同浓度的Eu3+从白光，黄光，到红光进行调控。低浓度掺杂发白光，高浓度掺杂发红光，适当的浓度发黄光。 在Lu3Ga5O12:Re3+ (Re = Eu, Tb，Pr)荧光粉体系中，在紫外（UV）和低压阴极射线激发下，所制备的荧光粉Lu3Ga5O12: Eu3+, Lu3Ga5O12: Pr3+为稀土离子Eu3+, Pr3+的特征发射，分别发黄光和绿光。Lu3Ga5O12:Tb3+的发光颜色因Tb3+掺杂浓度不同而不同，低浓度掺杂发蓝光，高浓度发绿光。 Sr2CeO4荧光粉在UV及低压阴极射线激发下发出强烈蓝光，源于配体到金属离子电荷迁移带跃迁(Ce4+-O2-)。其阴极射线发光强度与电压及灯丝电流呈良好的线性关系。 采用溶胶－凝胶方法的核壳结构的SiO2@CaTiO3:Pr3+和SiO2@Y3Al5O12: Ce3+/Tb3+荧光粉, FESEM和TEM结果表明这种核壳结构的发光材料表面致密，厚度均匀，保持了单分散SiO2微球的形貌特征。在UV及低压阴极射线激发下，SiO2@CaTiO3:Pr3+呈强红色发射，源于Pr3+ 的1D2—3H4 (612 nm)跃迁；SiO2@Y3Al5O12:Ce3+和SiO2@Y3Al5O12:Tb3+ 分别发黄绿光和绿光，源于Ce3+的5d-4f和Tb3+的5D4-7FJ (J = 6, 5, 4, 3)跃迁。PL强度可以通过包覆次数调控，CL强度随激发电压及灯丝电流增加而增强。 在Ga2O3:Dy3+荧光粉体系中，采用了溶胶-凝胶，氨水共沉淀，和高温固相法制备了Ga2O3:Dy3+荧光粉并比较了他们的结晶行为，形貌，光致发光和低压阴极射线发光性能。溶胶-凝胶法制备由于原料在分子层次上混合，可以得到纯相，氨水共沉淀和高温固相法原料不如溶胶凝胶法混合均匀，很难得到纯相。溶胶-凝胶和氨水共沉淀所得荧光粉为纳米级别大小，分别呈球形和玉米棒形状；高温固相法微米级别且呈不规则形状。Ga2O3向Dy3+传递能量效率依次按溶胶-凝胶，氨水共沉淀，和高温固相法逐渐降低。在紫外光激发下，分别发白光，蓝白光，蓝光。其低压阴极射线发光与光致发光类似。相比之下，溶胶-凝胶法制备Ga2O3:Dy3+荧光粉比氨水共沉淀和高温固相法制备要好。

Ferromagnetic MnSb Films Consisting of Nanorods and Nanoleaves

Ferromagnetic MnSb films were synthesized on Si wafers by physical vapor deposition. X-ray diffraction revealed that the films primarily consisted of MnSb alloy. Nanorods and nanoleaves were observed in the MnSb films by field-emission scanning electron microscopy. These nanorods had an average diameter of 20nm and a length of up to hundreds of nanometers. The nanoleaves had a width and thickness of about 100 and 20nm, respectively. Magnetic hysteresis loops were measured by an alternative gradient magnetometer, and the loops showed strong geometrical anisotropy.

Fabrication of nano-sized grains by pulsed laser surface melting

In this work, the formation and characterization of nano-sized grains on the modified surfaces of GCr15 and H13 steels have been investigated. The material was processed by pulsed laser surface melting (LSM) under different depths of de-ionized water. The microstructures and phases of the melted zones were examined by x-ray diffraction, environmental field emission scanning electron microscopy and high resolution transmission electron microscopy. The results indicate that LSM under water can successfully fabricate nano-scaled grains on the surfaces of steel, due to the rapid solidification and crystallization by heterogeneous nucleation. The elemental segregation of chromium and activated heterogeneous nucleation mechanism of austenite in liquid metal play a key role in the formation of nano-sized grains at high cooling rates. This one-step technique provides us a new way to prepare uniform nano-scaled grains, and is of great importance for further understanding the growth of nano-materials under extreme conditions.

改进的SILAR法制备ZnO薄膜及其表征

A modified solution method, successive ionic layer adsorption and reaction(SILAR), was applied to prepare transparent zinc oxide(ZnO) film on glass substrate at (125±5) ℃ in mixed ion precursor solution. The surface morphology and crystallizations of films were analyzed by field emission scanning microscopy(FESEM) and X-ray diffraction(XRD), respectively. The optical properties of the films were studied by ultraviolet visible(UV-Vis)spectroscopy. The results show that the obtained samples are polycrystallin...中文文摘：采用一种改进的液相成膜技术——连续离子层吸附与反应(SILAR)法,用锌氨络离子[Zn(NH3)4]2+溶液作为独立的前驱体溶液,以载玻片为衬底,在(125±5)℃的温度下沉积出致密、透明的ZnO薄膜。分别用冷场发射型扫描电镜(FESEM)和X射线衍射(XRD)分析了薄膜样品的表面形貌和结晶状态,用紫外-可见分光光度计(UV-Vis spectroscopy)研究了薄膜样品的发光性能。结果表明:获得样品为六角纤锌矿结构的多晶薄膜材料沿[002]方向择优生长;样品表面均匀、致密,厚度约为550nm;在可见光波段具有高的透射率(>80%)。

Electrochemical polymerization and characterization of polypyrrole nanowires and nanotubules

Polypyrrole nanostructure arrays, including simultaneously large quantities of nanowires and small quantities of partially filled nanotubules have been electrochemically synthesized in home-made etched ion-track polycarbonate (PC) templates. Diameter of the prepared nanostructures varies from 45 to 320 nm with their lengths up to 30 microns. Morphological studies of these nanostructures were performed by field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM) and Raman spectroscopy. While optical absorption properties were studied by ultraviolet-visible-near infrared spectrophotometry (UV-vis-NIR). It has been observed that the absorption maximum of polypyrrole shifts to the longer wavelength side as the diameter of these nanostructures (nanowires and nanotubules) increases. (C) 2010 Elsevier B.V. All rights reserved.

High PL-efficiency ZnO nanocrystallites/PPV composite nanofibers

In this paper, we report for the first time on the synthesis of ZnO nanocrystallites in conjugated polymer (PPV) nanofibers by the coupling of the in situ/blend methods and electrospinning. These composite nanofibers were characterized by fluorescence microscopy, atomic force microscope (AFM), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), photoluminescence (PL) spectra, Fourier transform infrared (FT-IR) spectroscopy, and X-ray powder diffraction (XRD).

Mass transfer resistance in the production of high impact polypropylene

Mass transfer resistance in the production of high impact polypropylene (hiPP) produced by a two-stage slurry/gas polymerization was investigated by field-emission scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. It is found that the formation of ethylene-propylene copolymer (EPR) phases in polypropylene (iPP) particle produced in the first stage slurry polymerization exhibits a developing process from exterior to interior

Controllable synthesis of metal hydroxide and oxide nanostructures by ionic liquids assisted electrochemical corrosion method

Cu(OH)(2) nanowires have been synthesized by anodic oxidation of copper through a simple electrolysis process employing ionic liquid as an electrolyte. Controlling the electrochemical conditions can qualitatively modulate the lengths, amounts, and shapes of Cu(OH)(2) nanostructures. A rational mechanism based on coordination self-assembly and oriented attachment is proposed for the selective formation of the polycrystalline Cu(OH)(2) nanowires. In addition, the FeOOH nanoribbons, Ni(OH)(2) nanosheets, and ZnO nanospheres were also synthesized by this route, indicative of the universality of the electrochemical route presented herein. The morphologies and structures of the synthesized nanostructures have been characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), powder X-ray diffraction (XRD). Fourier transform infrared spectra (FT-IR), and thermogravimetric (TG). (C) 2007 Elsevier Masson SAS. All rights reserved

Structure and electrochemical characteristics of melted composite Ti0.10Zr0.15V0.35Cr0.10Ni0.30-LaNi5 hydrogen storage alloys

The structure and electrochemical characteristics of melted composite Ti0.10Zr0.15V0.35Cr0.10Ni0.30+x% LaNi5 (x=0, 1, 5 and 10) hydrogen storage alloys have been investigated systematically. XRD shows that the matrix phase structure of V-based solid solution phase with a BCC structure and C14 Laves phase with hexagonal structure is not changed after adding LaNi5 alloy. However, the amount of the secondary phase increases with increasing LaNi5 content. Field emission scanning electron microscopy-energy dispersive spectroscopy (FESEM-EDS) shows that the C14 Laves phase contains more Zr and the white lard phase has a composition close to (Zr, Ti)(V, Cr, Ni, La)(2).

Microemulsion-mediated solvothermal synthesis and photoluminescent property of 3D flowerlike MnWO4 micro/nanocomposite structure

Novel three-dimensional (3D) flowerlike MnWO4 micro/nanocomposite structure has been successfully synthesized for the first time. The synthesized products were systematically studied by X-ray powder diffraction (XRD), field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) and photoluminescence (PL) spectra. It is found that both reaction time and temperature have significant effects on the morphology of the products.

Studies on the magnetism of cobalt ferrite nanocrystals synthesized by hydrothermal method

Fe-Co/CoFe2O4 nanocomposite and CoFe2O4 nanopowders were prepared by the hydrothermal method. The structure of magnetic powders were characterized by X-ray diffraction diffractometer (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), thermal gravity analysis (TGA) and differential thermal analysis (DTA) analysis, X-ray photoelectron spectrometry (XPS), and Fourier transform infrared spectra (FTIR) techniques, while magnetic properties were determined by using a vibrating sample magnetometer (VSM) at room temperature.

Investigation on charge transfer bands of Ce4+ in Sr2CeO4 blue phosphor

Bulk and nano-materials Sr2CeO4 were prepared by solid-state reaction and sol-gel technique, respectively. Photoluminescence shows that luminescence has the characteristic of a ligand-to-metal charge transfer (CT) emission. Compared with bulk Sr2CeO4, the nano-material exhibits stronger emission intensity, longer decay time, and higher CT excitation energy. Three CT excitation peaks were observed in both bulk and nano samples.

Syntheses of opened hollow clay microspheres through a spray-drying approach and their derivative clay/carbon nanotubes composites

Opened hollow microspheres of organoclays were prepared via spray drying the suspension of modified Na+-montmorillonite (Na+-MMT) with alkylsulfonate. The microstructure and thermal properties of these opened hollow spheres were characterized by means of wide-angle X-ray diffraction, field emission scanning electron microscopy, and thermogravimetric analysis. The results showed that the organoclays had larger interlayer spacing compared with pure Na+-MMT and higher thermal stability relative to the alkylsufonate.

Energy transfer and tunable luminescence properties of Eu3+ in TbBO3 microspheres via a facile hydrothermal process

Tb(1-x)BO3:xEu(3+) (x = 0-1) microsphere phosphors have been successfully prepared by a simple hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL), low-voltage cathodoluminescence (CL), and time-resolved emission spectra as well as lifetimes were used to characterize the samples.

Polyol-Mediated Synthesis of PbS Crystals: Shape Evolution and Growth Mechanism

An interesting shape evolution of. PbS crystals, that is, from cubes to (truncated) octahedra and finally to stable star-shaped multipods with six arms along the < 100 > directions is first realized via a facile polyol-mediated reaction between lead acetate and sulfur powder in the absence of surfactants. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Fourier transform infrared (FT-IR) techniques were employed to characterize the samples. We elucidate the important parameters (including reaction temperature and sulfur sources) responsible for the shape-controlled synthesis of PbS crystals.