Synthesis and thermal polymerization of a novel stilbene-maleimide AB-monomer

A novel AB-monomer, 3-maleimidostilbene (ST-MAI), was synthesized. DSC investigation indicated that the ST-MAI monomer melted at 127 degrees C and thermally polymerized in the temperature range of 180 similar to 300 degrees C. LR investigation on the thermal polymerization processes proved that the thermal polymerization included not only copolymerizaiton between stilbene and maleimide, but also homopolymerization of maleimide. The largest reaction conversion of maleimide and stilbene unit in a ST-MAI monomer was about 82% and 50% respectively. The glass transition temperature of cured ST-MAI resin was 234 degrees C, determined by DSC. The decomposition temperatures for 10% weight loss was above 430 degrees C in both air and nitrogen atmospheres.

Ab initio study on the interaction of La (III) with adrenaline

The interaction of La(III) with adrenaline was studied using Ab initio method. The geometry of the complex of La (III) with adrenaline was optimized, and the La(III) bonding site in adrenaline was ascertained.

Ab initio study of C-9 and LaC9+ clusters

The energies and geometries of C-9 and LaC9+ clusters were calculated at HF, MP2 and DFT levels. For C-9, all theoretical levels show that the linear chain is the most stable structure. For LaC9+, two isomers were considered. In the first case La has two single bonds (A), while it forms a double bond in the second (B). Our results showed that in HF calculation, B is marginally more stable than A, while for MP2 and DFT, A is favored. Our results also revealed that there is not enough space for C-9 ring to accommodate lanthanum. Our conclusion agrees well with experiment.

STRUCTURE AND PROPERTIES OF AB CROSS-LINKED POLYMERS

Hydroxy-terminated oligomers, such as polyester, polyether, or castor oil, were reacted with toluene diisocyanate to form isocyanate-terminated prepolymers, which were then reacted with 2-hydroxyethyl acrylate to obtain vinyl-terminated prepolymer (VTP).

端乙烯基聚酯－苯乙烯AB交朕聚合物的研究

本文通过顺丁烯二酸酐与端羟基聚酯反应，合成端乙烯基羧基聚酯，再与苯乙烯共聚，制备出ＡＢ交联和接枝共聚物，研究了共聚物的组成与阻尼性能的关系，研究结果有益于阻尼材料分子设计．

蓖麻油-甲基丙烯酸甲酯AB交联聚合物的研究

将蓖麻油与顺丁烯二酸酐反应,合成端乙烯基蓖麻油,再与甲基丙烯酸甲酯共聚,制得了组成不同的一系列AB交联聚合物,研究了它们的动态性能、力学性能和形态结构与组成的关系.

MORPHOLOGY AND DYNAMIC MECHANICAL-PROPERTIES OF AB CROSS-LINKED POLYMERS BASED ON POLYURETHANES

Polyoxypropylene glycol (PPG) (or castor oil) and toluene diisocyanate (TDI) were mixed, and the prepolymer polyurethane (PU) (I) was formed. Vinyl-terminated polyurethane (II) was prepared from (I), and hydroxyethyl acrylate, AB crosslinked polymers (ABCPs) were synthesized from (II) and vinyl monomers such as styrene, methyl methacrylate, vinyl acetate, etc. The dynamic mechanical properties and morphology of ABCPs were measured. The ABCPs based on PPG have double glass transition temperatures (T(g)) on the sigma-vs. temperature curves. They display a two-phase morphology with plastic components forming the continous phase and PU-rich domains forming the separated phase on the electron micrographs. Irregular shapes and a highly polydisperse distribution of PU-rich domain sizes were observed. The crosslink density of ABCPs has a notable effect on the morphology and properties. The average diameter of the PU-rich domains depends on the molecular weight of prepolymer PPG. The highly crosslinked structures will produce large numbers of very small domains. ABCPs based on castor oil show a single T(g) relaxation on the dynamic mechanical spectra. The compatibility between the two components is much better in ABCPs based on castor oil than in those based on PPG, because there is a high crosslink density in the former. Comparison of the dynamic mechanical spectra of ABCP and interpenetrating networks (IPN) based on castor oil with similar crosslink density and composition imply that the two components in ABCP are compatible whereas microphase separation occurs in IPN. An improvement in the compatibility is achieved by the crosslinking between the two networks.

COPU/PMMA AB交联聚合物的性能

AB交联聚合物(ABCP)是由聚合物A链与化学组成不同的聚合物B链交联构成。它的网络结构不同于IPN。IPN是由两个独立的网络构成,而在ABCP中仅存在一个聚合物网络。目前人们对它远不及对IPN了解得多。 本文选用蓖麻油为原料,与甲基丙烯酸甲酯共聚,合成了一种ABCP。研究了它的力学性能,转变与松弛,相容性及形态结构与组成及交联密度的关系。

聚氨酯基AB交联聚合物的动态力学性质

用紫外光聚合方法制备出一系列不同组成的聚己二酸己二醇酯聚氨酯(PHAPU)和甲基丙烯酸甲醇(MMA)AB交联聚合物(ABCP)。用溶胀法和橡胶平台模量法测定了它们的交联密度,两种方法所得结果具有非常好的一致性。本文研究的ABCP半高宽大于60℃,属于半相容体系。改变PHAPU和MMA的组成可以得到阻尼性能以及其他力学性能比PHAPU和PMMA更好的ABCP。

AB交联聚合物的形态

以低分子量的端乙烯基聚氨酯预聚物同乙烯类单体共聚制得的AB交联聚合物(ABCP)呈现出两相形态结构,聚氨酯相形成分散相,塑料组份形成连续相。形态结构最显著特点是分散相区呈现出多分散性;其次,分散相区的形状不规则。这些特征不同于线型AB、ABA嵌段共聚物及A_2B接枝共聚物,这是由于ABCP中,A和B两组份间存在着化学交联。交联密度,预聚物的分子量对两组份的相容性,形态结构有显著影响。

蓖麻油基AB交联聚合物的介电性质

在-180℃至140℃范围内,用几个频率测定了蓖麻油基AB交联聚合物的介电松弛谱。对这些聚合物的多重松弛和相行为的研究表明,试样中的两组份在介电松弛谱上显现出相容的或近似互容的特征。试样中的次级松弛归因于聚氨酯组份中链段的局部运动。提出了一个描述界面极化的方法,计算了界面极化松弛活化能,它们同试样中组份间的相容性,界面相互作用大小以及分子链的柔曲性有关。