LDPE/EVA共混体系的结晶行为

本文通过DSC、WAXD、偏光显微镜、DMA等方法,对LDPE/EVA共混体系进行了研究。结果表明,EVA可使LDPE的熔融峰温提高15℃。并在LDPE结晶过程中起稀释剂作用。LDPE/EVA共混体系为非晶相相容。

PEK-C/PPS共混体系的相容性和结晶行为

结晶-非晶高聚物共混体系的相容性和结晶行为的研究已有许多报道。本工作研究了含酞侧基聚芳醚酮(PEK-C)与聚苯硫醚(PPS)共混物的相容性和结晶行为。 PEK-C为徐州工程塑料厂产品,未作封端处理,η?p/c=0.70;PPS为日本东丽产品。两者用双螺杆挤出机在320～350℃制成共混物。仪器为Perkin-Elmer DSC-7型差示扫描量热仪,升温速率10℃/min;DDV-Ⅱ-EA型全自动动态粘弹谱仪和理学D/max-ⅡBX-射线衍射仪。

稀土氧化物对聚丙烯晶型和动态力学性能的影响

本文用DSC和粘弹谱仪研究了La_2O_3,Y_2O_3和混合稀土氧化物对全同聚丙烯(iPP)的结晶行为,熔融行为和动态力学性能的影响。结果表明不同的iPP/稀土氧化物复合材料中iPP的晶型不同,Y_2O_3和稀土氧化物是iPP的α和β晶成核剂,La_2O_3是α晶成核剂。含有β晶试样同只有α晶试样相比,在T_g真松弛区其tanδ值较低,贮能模量E从-50℃～+50℃较高,从+50℃～+145℃则E值较低。

间硝基苯甲酸稀土配合物的热分解

用TG-DTA,高温X-射线衍射研究了稀土间硝基苯甲酸配合物LnL_3·nH_2O(n=2,Ln=La→Lu+Y;n=0,Ln=Sc,HL=间硝基苯甲酸)的热分解行为,DSC测定其脱水相变过程中的热力学函数,同时用透射电镜观察了热分解产物的超微性。

稀土催化剂本体聚合异戊二烯的生胶性能

本体聚合与溶液聚合相比,具有能耗低,反应平稳,转化率高等特点。杨彩云等用稀土催化剂对异戊二烯(Ip)进行本体聚合,聚合转化率达80%以上,聚合物中无疑胶,且分子量分布较窄(M_w/M?<2)。本文报道和讨论本体聚合放大试验胶样的生胶特性。 异戊二烯胶样(BLn-IR)本所自制。溶液钛催化聚异戊二烯IR-1Q为日本JSR生产。天然橡胶(NR)系海南岛3~#烟片。门尼粘度按GB1232测定。应力-应变性能(23℃),用DL-1000B型电子拉力机测定,拉速500mm/min。玻璃化温度(T_g)用PE DSC-2C型仪测定,升温速率

含硝基偶氮苯侧基的丙烯酸酯类液晶聚合物的合成、结构与性质研究——Ⅱ.分子结构对T_g的影响

利用DSC研究了分子结构对含硝基偶氮苯侧基的丙烯酸酯液晶聚合物玻璃化温度的影响。结果表明,随柔性间隔基长度增加,T_g降低;当引入丙烯酸甲酯(MA)作为非晶共聚组分时,T_g降低;T_g真随MA摩尔百分含量增加而降低;当引入丙烯酸作为非晶共聚组分时,T_g升高。

一种梳型两亲聚合物的超分子结构

利用DSC、WAXD、IR及POM等手段对梳型两亲聚合物聚(2-丙烯酰胺基十六烷磺酸)(PAMC_(16)S)的超分子结构作了研究,对其组织形式作了考察,结果表明聚合物表现出梳型聚合物典型的层状堆砌,给出了其堆砌模型,对其液晶性也作了讨论。

PVA/PVP共混体系的非等温结晶动力学

用Mandelkern和Ziabicki理论方法求得PVA及PVA/PVP共混物结晶动力学参数Z_C和动力学结晶能力G_C值,并进行了讨论。得到的Avrami指数n不随冷却速度变化,但随非晶组分PVP的加入有所减小,加入量达百分之四十以后n由3降到2;G_C值则随非晶组分的加入而增大,当PVP加入量大于百分之三十时,G_C值不再发生明显变化。同时实验表明该高聚物及其共混体系不适合于Ozawa非等温结晶动力学方程。

RADIATION EFFECTS ON CRYSTALLINE POLYMERS .1. GAMMA-RADIATION-INDUCED CROSS-LINKING AND STRUCTURAL CHARACTERIZATION OF POLYETHYLENE OXIDE

By using WAXD, DSC and gel fraction determination techniques, the mechanism of radiation crosslinking of polyethylene oxide (PEO) was explored, and the dependence of aggregated state on the chemical reaction and physical structure was also discussed. It was found that just like other semi-crystalline polymers, the state of aggregation of the specimen has a profound influence on the radiation effects on PEO. On the contrary, the crystalline structure of the specimen is severely affected with the increase in radiation dose and eventually amorphortized when subjected to an extremely high radiation dose.

BLENDS OF POLY[3,3-BIS(CHLOROMETHYL)OXETANE] WITH POLY(VINYL ACETATE) .1. THERMAL AND MECHANICAL-PROPERTIES

Blends of poly[3,3-bis(chloromethyl)oxetane] (Penton) with poly(vinyl acetate) were prepared. Compatibility, morphology, thermal behavior, and mechanical properties of blends with various compositions were studied using differential scanning calorimetry (DSC), dynamic mechanical measurements (DMA), tensile tests, and scanning electron microscopy (SEM). DMA study showed that the blends have two glass transition temperatures (T(g)). The T(g) of the PVAc rich phase shifts significantly to lower temperatures with increasing Penton content, suggesting that a considerable amount of Penton dissolves in the PVAc rich phase, but that the Penton rich phase contains little PVAc. The Penton/PVAc blends are partially compatible. DSC results suggest that PVAc can act as a beta-nucleator for Penton in the blend. Marked negative deviations from simple additivity were observed for the tensile strength at break over the entire composition range. The Young's modulus curve appeared to be S-shaped, implying that the blends are heterogeneous and have a two-phase structure. This was confirmed by SEM observations.

THERMAL ANALYSIS AND INFRARED SPECTRA OF DIALKYLAMMONIUM TETRAC HLOROCUPRATE

The thermal stability and the solid solid phase transitions in Ills compounds with n = 7-12 have been studied by DSC and TG methods. Comparision with CnZn compounds want made. The nature of three phases of CnCu has been discussed in terms of infrared spectroscopy and the assignment of the phase transitions has been given. The thermal stability of CnCu is lower than that of CnZn and presents an obvious odd even effect. All of these compounds exhibit two solid solid phase transitions in the temperature range of 248-337 K. The peak tempe nature of phase transitions changes regularly. The peak temperature or the main phase transition increases with the chain length. The total transition enthalpies and entropies increase with increasing chain length. When n <= 9, the high temperature phase exists in a partial disorder state. When n >= 10, the high temperature phase exists in a conformational disorder state. The main phase transition and the phase transition at 307.7 K of CnCu may mainly are from the change of the packing structure and the change of the partial conformational order-disorder of alkyl chain, respectively.

γ辐照LDPE/EPDM共混物的动态力学性能和热行为

本文报道了~(60)Coγ辐照LDPE/EPDM共混物的动态力学性能和热行为。在动态力学性能谱上出现两个转变,-20℃左右的转变是LDPE的β转变和EPDM玻璃化转变相叠加的转变,其峰温简称T_(βg),转变峰较平坦,表明LDPE/EPDM具有一定相容性;在69℃附近的另一个转变是LDPE的结晶预熔温度,随辐照剂量的增加而下降。未辐照的α转变活化能为106kJ/mol,辐照后活化能下降至80kJ/mol左右。用DSC法在所利用的剂量范围内,EPDM的T_g随剂量变化甚微,共混物的T_(βg)则不明显。LDPE的T_m辐照后有所下降,结晶度略有改变。

结晶聚合物的辐射效应 Ⅰ.γ-辐照尼龙1010的聚集态结构

本文通过WAXD和DSC等方法研究了γ-辐照尼龙1010聚集态结构的变化,结晶损伤和无定形化的过程。这些过程和结晶与非晶界面原子参与化学反应密切相关,结晶损伤从结晶表面开始,随着辐照剂量增加逐渐向结晶内伸展,直到完全无定形化。

PEO/PVP共混体系结晶行为

本文用WAXD、PLM、DSC方法研究了聚氧化乙烯(PEO)/聚乙烯基吡咯烷酮(PVP)共混体系的结晶行为,探索了两组分聚合物间相互作用及体系结晶度与非晶组分含量的关系。DSC研究表明PEO/PVP共混体系具有两个玻璃化转变温度,分别是纯组分的T_g,无相容性。应用Avrami和LH方程对其动力学参数进行了研究。偏光显微镜观察了共混物结构形态。

HDPE/LDPE共混体系的晶性研究

用DSC和WAXD方法考察了高密度聚乙烯和低密度聚乙烯共混体系(HDPE/LDPE)的结晶性能。结果表明,在共混物中HDPE含量大于50%时,共混物只出现HDPE的熔融峰,且熔融温度随HDPE含量减小而降低;LDPE含量大于50%时,DSC图上只出现熔点介于HDPE和LDPE之间的新熔融峰。DSC和WAXD法所测结晶度均偏离共混物的线性加和值,而晶胞参数则随共混物组成变化出现最小值,表明HDPE和LDPE可以形成共晶相容体系。Raman光谱测得介晶相αb值的膨胀,支持这一观点。