EAWM-related air-sea-land interaction and the Asian summer monsoon circulation

Based on the data analysis, this study further explores the characteristics of East Asian winter monsoon (hereafter, EAWM, for brevity) as well as the related air-sea-land system, and illustrates how and to what degree anomalous signals of the subsequent Asian summer monsoon are rooted in the preceding EAWM activity. We identified an important air-sea coupled mode, i.e., the EAWM mode illustrated in Section 3. In cold seasons, strong EAWM-related air-sea two-way interaction is responsible for the development and persistence of the SSTA pattern of EAWM mode. As a consequence, the key regions, i.e., the western Pacific and South China Sea (hereafter, SCS, for brevity), are dominated by such an SSTA pattern from the winter to the following summer. In the strong EAWM years, the deficient snow cover dominates eastern Tibetan Plateau in winter, and in spring, this anomaly pattern is further strengthened and extended to the northwestern side of Tibetan Plateau. Thus, the combined effect of strong EAWM-related SSTA and Tibetan snow cover constitutes an important factor in modulating the Asian monsoon circulation. The active role of the EAWM activity as well as the related air-sea-land interaction would, in the subsequent seasons, lead to: 1) the enhancement of SCS monsoon and related stronger rainfall; 2) the northward displacement of subtropical high during Meiyu period and the related deficient rainfall over Meiyu rainband; 3) above-normal precipitation over the regions from northern Japan to northeastern China in summer; 4) more rainfall over the Arabian Sea and Northeast India, while less rainfall over southwest India and the Bay of Bengal. The strong EAWM-related air-sea interaction shows, to some degree, precursory signals to the following Asian summer monsoon. However, the mechanism for the variability of Indian summer monsoon subsequent to the strong EAWM years remains uncertain.

南海西北部陆架海域内孤立波特征及机理研究

关于南海北部内孤立波的研究，现在是一个国际性研究热点，以往对南海北部海域的内孤立波的研究大都集中于南海东北部，即东沙-吕宋海峡海域。对于南海西北部文昌海域的内波现场调查研究几乎是空白。2005年4-10月中科院海洋所对南海西北部陆架海域进行了现场内波观测，获得了到目前为止国内连续观测时间最长、高分辨率、高质量的温度及流场数据。本文使用此次观测所获得的海流和温度资料，主要针对观测海域内孤立波特征及机理进行分析研究，取得了若干有重要科学意义的成果,主要为: 该海域是内孤立波多发地区，其中从2005年4月中旬到6月孤立波频繁出现且振幅较大，而6月中旬到9月中旬，内孤立波的发生频率明显下降，振幅也相对较小; 内孤立波的极性也表现出明显的季节性变化特征。研究发现内孤立波的季节性变化特征是与跃层的深浅和强弱密切相关的。 在2005年9月期间观测到了一系列的大振幅内孤立波，其中在同一测站的不同天内分别发现上凸型和下凹型内孤立波。研究表明这些内孤立波极有可能是由陆架坡折处的内潮因非线性和频散效应而局地产生的。这是首次通过现场观测确认南海西北部存在上凸型并且其为局地生成的内孤立波。 进一步分析发现在2005年8月21-23日，观测到了第二模态的内孤立波，这些内孤立波是与第二模态的内潮同步发生的，在连续两天内几乎相同的时刻分别观测到第二模态的内孤立波说明这些孤立波是潮致的。 在2005年4月22-28日发现长时间的强海流现象，强海流现象发生在当地的天文潮小潮期间，沿岸方向的流速明显大于垂直于岸方向的流速，通过分析表明强海流是由当地的内潮流引起的。 根据观测的温、流数据分析了内波场对台风的响应过程及内波谱特征，发现台风对观测站位的温度场和流场结构均有显著的影响。 这些在南海西北部的新发现和新认识对推动内孤立波的产生机制和应用技术的研究具有重要的学术价值。

中国近海和西北太平洋温跃层时空变化分析、模拟及预报

温度跃层是反映海洋温度场的重要物理特性指标，对水下通讯、潜艇活动及渔业养殖、捕捞等有重要影响。本文利用中国科学院海洋研究所“中国海洋科学数据库”在中国近海及西北太平洋（110ºE-140ºE,10ºN-40ºN）的多年历史资料（1930-2002年，510143站次），基于一种改进的温跃层判定方法，分析了该海域温跃层特征量的时空分布状况。同时利用Princeton Ocean Model(POM)，对中国近海，特别是东南沿海的水文结构进行了模拟，研究了海洋水文环境对逆温跃层的影响。最后根据历史海温观测资料，利用EOF分解统计技术，提出了一种适于我国近海及毗邻海域，基于现场有限层实测海温数据，快速重构海洋水温垂直结构的统计预报方法，以达到对现场温跃层的快速估计。 历史资料分析结果表明，受太阳辐射和风应力的影响，20°N以北研究海域，温跃层季节变化明显，夏季温跃层最浅、最强，冬季相反，温跃层厚度的相位明显滞后于其他变量，其在春季最薄、秋季最厚。12月份到翌年3月份，渤、黄及东海西岸，呈无跃层结构，西北太平洋部分海域从1月到3月份，也基本无跃层结构。在黄海西和东岸以及台湾海峡附近的浅滩海域，由于风力搅拌和潮混合作用，温跃层出现概率常年较低。夏季，海水层化现象在近海陆架海域得到了加强，陆架海域温跃层强度季节性变化幅度(0.31°C/m)明显大于深水区(约0.05°C/m)，而前者温跃层深度和厚度的季节性变化幅度小于后者。20°N以南研究海域，温跃层季节变化不明显。逆温跃层主要出现在冬、春季节（10月-翌年5月）。受长江冲淡水和台湾暖流的影响，东南沿海区域逆温跃层持续时间最长，出现概率最大，而在山东半岛北及东沿岸、朝鲜半岛西及北岸，逆温跃层消长过程似乎和黄海暖流有关。多温跃层结构常年出现于北赤道流及对马暖流区。在黑潮入侵黄、东、南海的区域，多温跃层呈现明显不同的季节变化。在黄海中部，春季多温跃层发生概率高于夏季和秋季，在东海西部，多跃层主要出现在夏季，在南海北部，冬季和春季多温跃层发生概率大于夏季和秋季。这些变化可能主要受海表面温度变化和风力驱动的表层流的影响。 利用Princeton Ocean Model(POM)，对中国东南沿海逆温跃层结构进行了模拟，模拟结果显示，长江冲淡水的季节性变化以及夏季转向与实际结果符合较好，基本再现了渤、黄、东海海域主要的环流、温盐场以及逆温跃层的分布特征和季节变化。通过数值实验发现，若无长江、黄河淡水输入，则在整个研究海域基本无逆温跃层出现，因此陆源淡水可能是河口附近逆温跃层出现的基本因素之一。长江以及暖流（黑潮和台湾暖流）流量的增加，均可在不同程度上使逆温跃层出现概率及强度、深度和厚度增加，且暖流的影响更加明显。长江对东南沿海逆温跃层的出现，特别是秋季到冬季初期，有明显的影响，使长江口海域逆温跃层位置偏向东南。暖流对于中国东南沿海的逆温跃层结构，特别是初春时期，有较大影响，使长江口海域的逆温跃层位置向东北偏移。 通过对温跃层长期变化分析得出，黄海冷水团区域，夏季温跃层强度存在3.8年左右的年际变化及18.9年左右的年代际变化，此变化可能主要表现为对当年夏季和前冬东亚地区大气气温的热力响应。东海冷涡区域，夏季温跃层强度存在3.7年的年际变化，在El Nino年为正的强度异常，其可能主要受局地气旋式大气环流变异所影响。谱分析同时表明，该海域夏季温跃层强度还存在33.2年的年代际变化，上世纪70年代中期，温跃层强度由弱转强，而此变化可能与黑潮流量的年代际变化有关。 海洋水温垂直结构的统计预报结果显示，EOF分解的前四个主分量即能够解释原空间点温度距平总方差的95%以上，以海洋表层附近观测资料求解的特征系数推断温度垂直结构分布的结果最稳定。利用东海陆架区、南海深水区和台湾周边海域三个不同区域的实测CTD样本廓线资料，对重构模型的检验结果表明，重构与实测廓线的相关程度超过95%的置信水平。三个区重构与实测温度廓线值的平均误差分别为0.69℃，0.52℃，1.18℃，平均重构廓线误差小于平均气候偏差，统计模式可以很好的估算温度廓线垂直结构。东海陆架海区温度垂直重构廓线与CTD观测廓线获得的温跃层结果对比表明，重构温跃层上界、下界深度和强度的平均绝对误差分别为1.51m、1.36m和0.17℃/m，它们的平均相对误差分别为24.7%、8.9%和22.6%，虽然温跃层深度和强度的平均相对误差较大，但其绝对误差量值较小。而在南海海区，模型重构温跃层上界、下界和强度的平均绝对预报误差分别为4.1m、27.7m和0.007℃/m，它们的平均相对误差分别为16.1%、16.8%和9.5%，重构温跃层各特征值的平均相对误差都在20%以内。虽然南海区温跃层下界深度平均绝对预报误差较大，但相对于温跃层下界深度的空间尺度变化而言（平均温跃层下界深度为168m），平均相对误差仅为16.8%。因此说模型重构的温度廓线可以达到对我国陆架海域、深水区温跃层的较好估算。 基于对历史水文温度廓线观测资料的分析及自主温跃层统计预报模型，研制了实时可利用微机简单、快捷地进行温跃层估算及查询的可视化系统，这是迄今进行大范围海域温跃层统计与实时预报研究的较系统成果。

The boundary of palaearctic and oriental realms in western China

In the world-wide zoogeographic division, there has been no consentaneous understanding about the delimitation between palaearctic and oriental realms in western China. In this study, we will discuss the division based on amphibian distribution in Shaanxi, Gansu, Sichuan, Yunnan, and Tibet according to species coefficient similarity between each zoogeographic province. The results show that the northern border lies from Qinling Mountains-Feng Xian (Shaanxi)-Debu (Gansu)-Aba (Sichuan)-Batang-Bomi (Tibet), to Linzhi districts, and the southern border is from Taibai-Feng Xian in Shaanxi-Wen Xian (Gansu)-Songpan-Kangding-Daocheng (Sichuan), to Zhongdian-Gongshan in Yunnan, and westward to Motuo and Bomi district in Tibet. (c) 2008 National Natural Science Foundation of China and Chinese Academy of Sciences. Published by Elsevier Limited and Science in China Press. All rights reserved.

Two new species of Saxifraga (Saxifragaceae) from Southwestern China

Two new species, Saxifraga xiaozhongdianensis J. T. Pan and S. ludingensis J. T. Pan, from the Saxifragaceae in China are described and illustrated. Of these, S. xiaozhongdianensis is endemic to Zhongdian, Yunnan, and is related to S. brachyphylla Franchet. It differs from S. brachyphylla in the sepals adaxially dark brown glandular-villose and the petals basally subauriculate. Saxifraga ludingensis occurs in Luding, Sichuan, and is very similar to S. egregioides J. T. Pan and S. stellariifolia Franchet. It differs from S. egregioides in the stems brown glandular-villose, the cauline leaves adaxially brown glandular-villose, the sepals spreading in anthesis and abaxially brown glandular-villose, and the petals 5-veined. It differs from S. stellariifolia in the leaves cordate and abaxially glabrous, the sepals abaxially brown glandular-villose, and the petals 4-callose and 5-veined. Saxifraga xiaozhongdianensis and S. ludingeasis are apparently endemic to western China and belong to Saxifraga sect. Ciliatae Haworth, emend. J. T. Pan.

Distribution and species diversity of plant communities along transect on the Northeastern Tibetan plateau

The distribution and species diversity of plant communities along a 600 km transect through the northeastern Tibetan Plateau (32 degrees 42'-35 degrees 07' N, 101 degrees 02'-97 degrees 38' E) with altitudes from 3255 to 4460 m are described. The transect started from the Youyi Bridge of Banma through Dari, Maqin and Maduo to Zaling Lake. The data from 47 plots along the transect are summarized and analyzed. The mean annual temperature, the mean annual rainfall and the length of growing season decreases from 2.6 to -4.5 degrees C, from 767.2 to 240.1 mm, from 210 to 140 days, respectively, along the transect from the southeastern Banma to northwestern Zaling Lake. The number of vascular plant species recorded in 47 plots is 242 including 2 tree, 34 shrub, 206 herb species. Main vegetation types on the transect from southeast to northwest are: Sabina convallium forest, Picea likiangensis forest, Pyracantha fortuneana + Spiraea alpina shrub, Hippophae neurocarpu shrub, Sibiraea angustata + Polygonum viviparum shrub, Stellera chamaejasme herb meadow, Potentilla fruticosa + Salix obscura + Carex sp. Shrub, Kobresia capillifolia meadow, P. froticosa + Kobresia humilis shrub, Caragana jubata + S. obscura shrub, Kobresia tibetica meadow, Kobresia pygmaea meadow, K. pygmaea + Stipa purpurea steppe meadow, Stipa purpurea steppe. Plant richness and diversity index all showed a decreasing trend with increasing of elevation along transect from southeast to northwest. Detailed information on altitudinal ranges and distribution of the alpine vegetation, vascular flora and environments over the alpine zone at northeastern Tibetan Plateau provides baseline records relevant to future assessment of probable effects of global climate changes.

中祁连花岗岩年代学、地球化学及其构造意义

The Qilian Orogenic Belts had undergone very complicated evolutional histories and play an important role in understanding the tectonic evolutions of old terrains in northwestern China, in which granitiods formed during Proterozoic-early Mesozoic are widely outcropped. Detailed studies of these granitiods can shed some light on the tectonic evolution of this region. In this thesis, we have conducted geochronological and geochemical studies on eight selected granitic plutons to unravel their emplacement ages and petrogenesis. Furthermore, their tectonic implications were also discussed based on these results. In Neo-Proterozoic, our results suggest that two stages of magmatic activities were taken place in Central Qilian Block, GroupⅠ(750-790Ma) and Group Ⅱ(845－ 930Ma). In Neo-Paleozoic, most granitic plutons were emplaced from Ordovician to Devonian, whereas granitiods with Triassic ages have also been discovered in South Qilian Belt. Inherited zircons with old ages of 1.7Ga, 2.1Ga and 2.7Ga have also been obtained in our study. Geochemical studies suggest that the Proterzoic granites were produced under high pressures and low temperatures from metamorphosed protolith rocks with compostions from basic to intermediate. This implies that some hot sources were underplated beneath lithosophere via mantle-derived magmatism. In combination with regional geological data, we propose that the Cental Qilian block was an old arc terrene during Precambrian, and two stage granitoids were formed under a back-arc extensional setting. Granitic rocks emplaced in early Paleozoic belong to strong peraluminous S-type granites, which were derived from metagreywacke having strong relationships with collisional process. Together with previous data, our results indicate that granitoids in Qilian Orogenic Belt formed during early Paleozoic have different petrogenesis and emplaced ages, which reflect that Qilian Orogenic Belt had underwent complicated multi-stage subduction-collusional processes in early Paleozoic. On the other hand, granitic rocks in South Qilian Belt with Triassic ages were formed by subduction of East Kulun during early Paleozoic-Late Mesozoic, which represent another orogenic episode in the northern margin of Tibetan Plateau.

贝尔凹陷苏德尔特构造带古潜山构造与储层研究

With the develop ment of oil and gas exploration, the conventional struc ture exploration era has gradually been substituted by the concealed reser voir exploration technology. Hill poll becomes one of the most important areas in the future exploration. This paper is based on the three-dimensional seismic interpretation of Sudeerte structure. In terms of the overall character istics of Sudeerte structure, we use the coherent cube and the time slice to interpret the fault in plane. For the interpretation，we especially used the well to adjust the interpretation results. The results of seismic attribution analysis, spectrum decomposition and post- stack seismic inversion forecast that hill pools reservoir are dist ributed in several bands along the north-northeast to northeast-east. Xing'anling Group shows that the potential reser voirs are mainly distributed along Bei 14 –Bei 40 and De (99-212) - Bei (16-1) and Budate Group distributed along Bei 14 –Bei 40 in northwestern direction and De (99-212) - Bei (16-1) in north eastern direction. At the same time, by analyzing the structure and the reservoir, and combining with other data, three models are built. The characteristics of reservoirs dist ribution are concl uded，and potent ional favorable exploration dire ctions are predi cted.

鄂尔多斯盆地三叠系延长组特低渗透储层分类评价

On the basis of the character of sedimentation and reservoir researching as well as diagenesis, using conventional and update testing measures, classificati-on and evaluation of the tesla low permeability reservoir in Ordos Basin is pr-esented. From Chang 8 to Chang 4+5 oil formations, four facies developed, includi-ng alluvial fan facies, delta facies, lake facies as well as density current. They were controlled by the northeastern, the southwest, the southern and the northwestern provenances. Distributary channel underwater and mouth bar of delta fr-ont are the main reservoirs. Detrital component has the different character in s-outh and in north. Sedimentary system in the northeastern part has more felds-par and less quartz. Sedimentary system in the southern part has more quartz and less feldspar. Because of sedimentation and diagenesis, the oil formations in region of interest formed the different features of pore array of the tesla l-ow permeability reservoirs. After researching, it is found that the active porosity and the main throat radius of Chang 4+5 are the highest, and they are positive correlation with per-meability. The exponent of flowing interval falls in the sortorder: Chang 8, Chang 4+5, Chang 6, Chang 7. Using clustering procedure and quaternion, the reservoirs of Yanchang for-mation in Ordos Basin are divided into five types. Ⅰ-good reservoirs and Ⅱ-appreciably good reservoirs occur in distributary channel and mouth bar. Ⅲ-poor reservoirs and Ⅳ-poorer reservoirs exist in natural levee, crevasse splay under-water and turbidity fan. It is forecasted that the oil area in Ⅰ-good reservoirs is about 4336.68 square kilometers, and the oil area in Ⅱ-appreciably good reservoirs is 28013.28 square kilometers or so, and the oil area in Ⅲ-poor rese-rvoirs is 28538.05 square kilometers more or less.

中国北方中新世风尘物质来源及古气候的地球化学指示

The most prominent tectonic and environmental events during the Cenozoic in Asia are the uplift of the Himalaya-Tibetan plateau, aridification in the Asian interior, and onset of the Asian monsoons. These caused more humid conditions in southeastern China and the formation of inland deserts in northwestern China. The 22 Ma eolian deposits in northern China provide an excellent terrestrial record relative to the above environmental events. Up to date, many studies have focused on the geochemical characters of the late Mio-Pleistocene eolian deposits, however, the geochemical characteristics of the Miocene loess and soils is still much less known. In this study, the elemental and Sr-Nd isotopic compositions of the eolian deposits from the Qinan (from 22.0 to 6.2 Ma) and the Xifeng (from 3.5 Ma until now) loess-soil sections were analyzed to examine the grain size effects on the element concentrations and the implications about the dust origin and climate. The main results are as follows: 1. The contents of Si, Na, Zr and Sr are higher in the coarser fractions while Ti and Nb have the highest contents in the 2-8 μm fractions. Al, Fe, Mg, K, Mn, Rb, Cu, Ga, Zn, V, Cr, Ni, LOI have clear relationships with grain-size, more abundant in the fine fraction while non significant relationship is observed for Y. Based on these features, we suggest that K2O/Al2O3 ratio can be used to address the dust provenance, and that VR (Vogt ratio = (Al2O3+K2O)/(MgO+CaO+Na2O)) can be used as a chemical weathering proxy for the Miocene eolian deposits because of their relative independence on the grain size. Meanwhile, SiO2/Al2O3 molar ratio is a best geochemical indicator of original eolian grain size, as suggested in earlier studies. 2. Analyses on the Sr and Nd isotope composition of the last glacial loess samples (L1) and comparison with the data from the deserts in northern China suggest that that Taklimakan desert is unlikely to be the main source region of the eolian dust. In contrast, these data suggest greater contributions of the Tengger, Badain Jaran and Qaidam deserts to the eolian dust during the last glacial cycle. Since the geochemical compositions (major, trace, REE and Sr, Nd isotope) of loess samples for the past 22 Ma are broadly similar with the samples from L1, these data trend to suggest relatively stable and insignificant changes of dust sources over the past 22 Ma. 3. Chemical weathering is stronger for Miocene paleosol samples than for the Plio-Pleistocene ones, showing warmer/more humid climatic conditions with a stronger summer monsoon in the Miocene. However, chemical weathering is typical of Ca-Na removal stage, suggesting a climate range from semiarid to subhumid conditions. These support the notion about the formation of a semi-arid to semi-humid monsoonal regime by the early Miocene, as is consistent with earlier studies.

地下水流动数值模拟的并行计算方法研究

Numerical modeling of groundwater is very important for understanding groundwater flow and solving hydrogeological problem. Today, groundwater studies require massive model cells and high calculation accuracy, which are beyond single-CPU computer’s capabilities. With the development of high performance parallel computing technologies, application of parallel computing method on numerical modeling of groundwater flow becomes necessary and important. Using parallel computing can improve the ability to resolve various hydro-geological and environmental problems. In this study, parallel computing method on two main types of modern parallel computer architecture, shared memory parallel systems and distributed shared memory parallel systems, are discussed. OpenMP and MPI (PETSc) are both used to parallelize the most widely used groundwater simulator, MODFLOW. Two parallel solvers, P-PCG and P-MODFLOW, were developed for MODFLOW. The parallelized MODFLOW was used to simulate regional groundwater flow in Beishan, Gansu Province, which is a potential high-level radioactive waste geological disposal area in China. 1. The OpenMP programming paradigm was used to parallelize the PCG (preconditioned conjugate-gradient method) solver, which is one of the main solver for MODFLOW. The parallel PCG solver, P-PCG, is verified using an 8-processor computer. Both the impact of compilers and different model domain sizes were considered in the numerical experiments. The largest test model has 1000 columns, 1000 rows and 1000 layers. Based on the timing results, execution times using the P-PCG solver are typically about 1.40 to 5.31 times faster than those using the serial one. In addition, the simulation results are the exact same as the original PCG solver, because the majority of serial codes were not changed. It is worth noting that this parallelizing approach reduces cost in terms of software maintenance because only a single source PCG solver code needs to be maintained in the MODFLOW source tree. 2. P-MODFLOW, a domain decomposition–based model implemented in a parallel computing environment is developed, which allows efficient simulation of a regional-scale groundwater flow. The basic approach partitions a large model domain into any number of sub-domains. Parallel processors are used to solve the model equations within each sub-domain. The use of domain decomposition method to achieve the MODFLOW program distributed shared memory parallel computing system will process the application of MODFLOW be extended to the fleet of the most popular systems, so that a large-scale simulation could take full advantage of hundreds or even thousands parallel processors. P-MODFLOW has a good parallel performance, with the maximum speedup of 18.32 (14 processors). Super linear speedups have been achieved in the parallel tests, indicating the efficiency and scalability of the code. Parallel program design, load balancing and full use of the PETSc were considered to achieve a highly efficient parallel program. 3. The characterization of regional ground water flow system is very important for high-level radioactive waste geological disposal. The Beishan area, located in northwestern Gansu Province, China, is selected as a potential site for disposal repository. The area includes about 80000 km2 and has complicated hydrogeological conditions, which greatly increase the computational effort of regional ground water flow models. In order to reduce computing time, parallel computing scheme was applied to regional ground water flow modeling. Models with over 10 million cells were used to simulate how the faults and different recharge conditions impact regional ground water flow pattern. The results of this study provide regional ground water flow information for the site characterization of the potential high-level radioactive waste disposal.

地震P-S波时差耦合作用的斜坡崩滑效应研究

China locates between the circum-Pacific and the Mediterranean-Himalayan seismic belt. The seismic activities in our country are very frequent and so are the collapses and slides of slope triggered by earthquakes. Many collapses and slides of slope take place mainly in the west of China with many earthquakes and mountains, especially in Sichuan and Yunnan Provinces. When a strong earthquake happening, the damage especially in mountains area caused by geological hazards it triggered such as rock collapses, landslides and debris flows is heavier than that it caused directly. A conclusion which the number of lives lost caused by geological hazards triggered by a strong earthquake in mountains area often accounts for a half even more of the total one induced by the strong earthquake can be made by consulting the statistical loss of several representative earthquakes. As a result, geological hazards such as collapses and slides of slope triggered by strong earthquakes attract wide attention for their great costs. Based on field geological investigation, engineering geological exploration and material data analysis, chief conclusions have been drawn after systematic research on formation mechanism, key inducing factors, dynamic characteristics of geological hazards such as collapses and slides of slope triggered by strong earthquakes by means of engineering geomechanics comprehensive analysis, finite difference numerical simulation test, in-lab dynamic triaxial shear test of rock, discrete element numerical simulation. Based on research on a great number of collapses and landslides triggered by Wenchuan and Xiaonanhai Earthquake, two-set methods, i.e. the method for original topography recovering based on factors such as lithology and elevation comparing and the method for reconstructing collapsing and sliding process of slope based on characteristics of seism tectonic zone, structural fissure, diameter spatial distribution of slope debris mass, propagation direction and mechanical property of seismic wave, have been gotten. What is more, types, formation mechanism and dynamic characteristics of collapses and slides of slope induced by strong earthquakes are discussed comprehensively. Firstly, collapsed and slided accumulative mass is in a state of heavily even more broken. Secondly, dynamic process of slope collapsing and sliding consists of almost four stages, i.e. broken, thrown, crushed and river blocked. Thirdly, classified according to failure forms, there are usually four types which are made up of collapsing, land sliding, land sliding-debris flowing and vibrating liquefaction. Finally, as for key inducing factors in slope collapsing and sliding, they often include characteristics of seism tectonic belts, structure and construction of rock mass, terrain and physiognomy, weathering degree of rock mass and mechanical functions of seismic waves. Based on microscopic study on initial fracturing of slope caused by seismic effect, combined with two change trends which include ratio of vertical vs. horizontal peak ground acceleration corresponding to epicentral distance and enlarging effect of peak ground acceleration along slope, key inducing factor of initial slope fracturing in various area with different epicentral distance is obtained. In near-field area, i.e. epicentral distance being less than 30 km, tensile strength of rock mass is a key intrinsic factor inducing initial fracturing of slope undergoing seismic effect whereas shear strength of rock mass is the one when epicentral distance is more than 30 km. In the latter circumstance, research by means of finite difference numerical simulation test and in-lab dynamic triaxial shear test of rock shows that initial fracture begins always in the place of slope shoulder. The fact that fracture strain and shear strength which are proportional to buried depth of rock mass in the place of slope shoulder are less than other place and peak ground acceleration is enlarged in the place causes prior failure at slope shoulder. Key extrinsic factors inducing dynamic fracture of slope at different distances to epicenter have been obtained through discrete element numerical simulation on the total process of collapsing and sliding of slope triggered by Wenchuan Earthquake. Research shows that combined action of P and S seismic waves is the key factor inducing collapsing and sliding of slope at a distance less than 64 km to initial epicenter along earthquake-triggering structure. What is more, vertical tensile action of P seismic wave plays a leading role near epicenter, whereas vertical shear action of S seismic wave plays a leading role gradually with epicentral distance increasing in this range. On the other hand, single action of P seismic wave becomes the key factor inducing collapsing and sliding of slope at a distance between 64 km and 216 km to initial epicenter. Horizontal tensile action of P seismic wave becomes the key factor gradually from combined action between vertical and horizontal tensile action of P seismic wave with epicentral distance increasing in this distance range. In addition, initial failure triggered by strong earthquakes begins almost in the place of slope shoulder. However, initial failure beginning from toe of slope relates probably with gradient and rock occurrence. Finally, starting time of initial failure in slope increases usually with epicentral distance. It is perhaps that the starting time increasing is a result of attenuating of seismic wave from epicenter along earthquake-triggering structure. It is of great theoretical and practical significance for us to construct towns and infrastructure in fragile geological environment along seism tectonic belts and conduct risk management on earthquake-triggered geological hazards by referring to above conclusions.

塔里木地块奥陶纪古地磁新结果及其构造意义

The Tarim Block is located between the Tianshan Mountains in the north and the Qinghai-Tibet Plateau in the south and is one of three major Precambrian cratonic blocks of China. Obviously, the Paleozoic paleogeographic position and tectonic evolution for the Tarim Block are very important not only for the study of the formation and evolution of the Altaids, but also for the investigation of the distributions of Paleozoic marine oil and gas in the Tarim Basin. According to the distributions of Paleozoic strata and suface outcrops in the Tarim Block, the Aksu-Keping-Bachu area in the northwestern part of the Tarim Block were selected for Ordovician paleomagnetic studies. A total of 432 drill-core samples form 44 sampling sites were collected and the samples comprise mainly limestones, argillaceous limestones and argillaceous sandstones Based on systematic study of rock magnetism and paleomagnetism, all the samples could be divided into two types: the predominant magnetic minerals of the first type are hematite and subordinate magnetite. For the specimens from this type, characteristic remanent magnetization (ChRM) could generally be isolated by demagnetization temperatures larger than 600℃; we assigned this ChRM as component A; whilst magnetite is the predominant magnetic mineral of the second type; progressive demagnetization yielded another ChRM (component B) with unblocking temperatures of 550-570℃. The component A obtained from the majority of Ordovician specimens has dual polarity and a negative fold test result; we interpreted it as a remagnetization component acquired during the Cenozoic period. The component B can only be isolated from some Middle-Late Ordovician specimens with unique normal polarity, and has a positive fold test result at 95% confidence. The corresponding paleomagnetic pole of this characteristic component is at 40.7°S, 183.3°E with dp/dm = 4.8°/6.9° and is in great difference with the available post-Late Paleozoic paleopoles for the Tarim Block, indicating that the characteristic component B could be primary magnetization acquired in the formation of the rocks. The new Ordovician paleomagnetic result shows that the Tarim Block was located in the low- to intermediate- latitude regions of the Southern Hemisphere during the Middle-Late Ordovician period, and is very likely to situate, together with the South China Block, in the western margin of the Australian-Antarctic continents of East Gondwana. However, it may have experienced a large northward drift and clockwise rotation after the Middle-Late Ordovician period, which resulted in the separation of the Tarim Block from the East Gondwanaland and subsequent crossing of the paleo-equator; by the Late Carboniferous period the Tarim Block may have accreted to the southern margin of the Altaids.

成矿流体构造动力学研究—以冀西北后沟金矿和山东七宝山金矿为例

Tectonic dynamics of metallogenetic fluids is a new crossed subjects among fluid geology, mineral deposit geology and structural geology, and is one of the major current projects of geosciences. It is mainly focused on structures and tectonic dynamic induced by fluid motion, variation of physical condition of fluids (such as temperature and pressure), and interaction between chemical component of fluids and wall rocks in the crust. It takes features of deformation and metamorphysim, which formed during interaction between fluids and rocks and have been perserved in rocks, as basic research objects. After studying types, orders, distributions and fabrics of these features, and analyzing and testing physical and chemical information from these features by some techniques, it is intended to reconstruct moving process of fluids, dynamics of interaction between fluids and rocks, and dynamics of mineralizations. Three problems of tectonic dynamics of metallogenetic fluids, which have not been paid much attentions before, have been studied and discussed in this report. Three relative topics are including: 1)Double-fracturing induced by thermal stress and pressure of fluids and mineralization of Gold-copper in Breccia Pipe at the Qibaoshan in Shandong Province; 2)Parting structures induced by K-metasomatism in the Hougou area, northwestern Heibei province; 3)Migration mechanism of dissolved mass in Fe&S-rich fluids in Hougou gold deposit in Heibei province. After a synthetical study of two years, the author has made some new processes and progresses. The main new advances can be summaried as the following: 1)Thermal stress of fluids formed by temperature difference between fluids and country rock, during upword migration process of fluids with high temperature and pressure, can make rock to break, and some new fractures, which surfaces were uasally dry, formed. The breccia pipe at the Qibaoshan area in Shandong province has some distinct texture of fluidogenous tectonics, the breccia pipe is caused by double-fracturing induced by thermal stress and pressure, distribution of gold-corpper ore bodies are controlled powerfully by fluidogenous tectonics in the breccia pipe. 2)The author discovered a new kind of parting structures in K-alterated rocks in the northwestern part of Hebei province. The parting structures have some distinct geometry and fabrics, it is originated from the acting and reacting fores caused by K-metasomatism. Namely, the crystallizations of metasomatic K-feldspars are a volume expansion process, it would compress the relict fluid bodies, and the pressures in the relict fluid bodies gathered and increased, when the increased pressure of the fluid relict bodies is bigger than the strength of K-feldspars, the K-feldspars were broken with the strong compression, and the parting structures formed. 3)Space position replacing is a important transport pattern of dissolved mass in Fe&S-rich fluid. In addition, basing on views of tectonic dynamics of metallogenic fluids, and time-space texture of fluid-tectonic-lithogenetic-mineralization of the known gold-corpper mineral deposit and the subvolcanic complex at Qibaoshan area in Shandong province, this report does a detail prodict of position-shape-size of two concealed ore-bearing breccia pipe.

中国北方风成堆积的风化作用与环境变迁—U-Th、~(10)Be及元素地球化学的研究

The surface of the Earth is continuously undergoing changes as a result of weathering-erosion, plate tectonics and volcanic processes. Continental weathering-erosion with its complex rock-water interactions is the central process of global biochemical cycling of elements, and affects the long-term ocean atmosphere budget of carbon dioxide both through the consumption of carbonic acid during silicate weathering and through changes in the weathering and burial rates of organic carbon. Rates of the weathering-erosion depend on a variety of factors, in particular rock properties and chemical composition, climate (especially rainfall), structure, and elevation. They are quite variable on a regional scale. Thus, environmental changes in a region could be indicated by the history of weathering-erosion in the region. Recent attention has focused on increased silicate weathering of tectonically uplifted areas in the India-Asia collision zone as a possible cause for falling atmospheric CO_2 levels in the Cenozoic era. The wind blown dust deposits in the Loess Plateau is derived from the arid and semiarid regions in northwestern China, in turn, where the deposits have been derived from the Qinghai-Xizang Plateau and the high mountains around. Therefore, geochemistry of the wind blown loess-paleosol and red clay sequences may provide insight both to paleoenvironmental changes on the Loess Plateau, and to the uplift and weathering-erosion histories of the Qinghai-Xizang Plateau. In this paper, uranium-thorium series nuclides and cosmogenic ~(10)Be have been employed as tracers of weathering intensities and histories of the dust sediments in the Loess Plateau. Major elements, such as Na, Al, Fe etc., are also used to estimate degree of chemical alteration of the dust sediments and to rebuild the history of weathering on the Loess Plateau. First of all, using a low-level HPGe γ-ray detector, we measured U and Th series nuclides in 170 loess and paleosol samples from five sites in the Loess Plateau, going back 2.6 Ma. The results show that ~(238)U activities are disequilibrium with its daughter nuclide ~(230)Th in young loess-paleosol sequence, indicating that weathering was happened both in dust deposition site and in dust source regions. Using concentrations of ~(238)U and ~(232)Th in the samples, we estimated the amounts of ~(238)U leached out of from paleosols due to weathering. Further, based on analyses of ~(230)Th in paleosols deposited in the past ca. 140 ka, we determined when the paleosols weathered in the source regions. We conclude that most of the weathering in the dust-source regions may have occurred during the interglacials before dust deposition.