CS和SG应变梯度介质的椭球形Eshelby张量

<正>研究了CS(偶应力)和SG(二阶梯度)应变梯度复合材料中的单夹杂问题,分别得到了无限大各向同性CS和SG应变梯度介质中含有椭球形夹杂时的Eshelby张量的解析表达式,该解析解只包含一个一维积分,是目前应变梯度椭球形Eshelby张量最简单的形式。球形夹杂、长纤维夹杂的Eshleby张量都可以由它简化得到,是其一

47 MeV/u ~(12)C与~(133)Cs反应中碘同位素产生截面的Q_(gg)依赖关系

用47 MeV/u 12C离子轰击133Cs靶,应用放射化学分离技术和离线γ射线谱学,得到碘同位素的产生截面。丰中子碘同位素的独立产生截面指数地依赖于Qgg值,而缺中子碘同位素的独立产生截面则偏离这一直线关系。这一事实可对在深部非弹转移过程中产生丰中子碘同位素予以解释。

~(12)C与~(133)Cs反应中Ba同位素的Q_(gg)产额依赖

使用47MeV/u12C离子轰击133Cs靶,由多核子转移反应产生Ba同位素。使用放射化学方法,从133Cs和反应产物中分离出产物Ba,再使用高纯Ge探测器测量Ba放射性同位素的γ活性,根据Ba同位素的活度和其他相关数据,确定Ba同位素的产生截面。通过分析测得的Ba同位素的厚靶平均产生截面,发现缺中子Ba同位素的独立截面不遵从规则的Qgg系统性。该结果可用重离子碰撞中的次级过程加以解释。

~(125)Cs的能级结构

通过116Cd(14N,5n),Ebeam=65MeV的核反应布居了125Cs的高自旋态.利用在束γ谱学实验方法,进行了γ γ符合测量,使已知的125Cs核能级纲图得到了扩展,并且修正了某些组态的带头激发能.

~(126)Cs的高自旋态能级结构

利用融合蒸发反应 116Cd(14 N ,4n) 12 6Cs布居了 12 6Cs的高自旋态 .观测到了 10 0多条新的γ跃迁和相应的能级 ,建立了双奇核 12 6Cs由 9个转动带构成的能级纲图 .尝试性地指定了大部分能级的自旋和宇称以及各转动带的Nilsson单粒子组态 .极大地丰富了已有的实验结果 .

Temperature effects of CsI(Tl) crystal detector with APD readout

The temperature dependences of the light output of CsI(Tl) crystal grown at IMP and of the gain of the Hamamatsu S8664-1010 avalanche photodiode (APD) have been investigated systematically. The light output of the CsI(Tl) crystal increases with temperature by 0.67%/degrees C in the region from -2 degrees C to 8 degrees C, and by 0.33%/degrees C in the region from 8 degrees C to 25 degrees C, while the gain of the tested APD decreases by -3.68%/degrees C (working voltage 400V) on average in the room temperature range. The best energy resolution 5.1% of the CsI(Tl) with APD was obtained for the 662keV gamma ray from Cs-137 radiation source.

Observation of negative-parity high spin states of Cs-126

The nucleus Cs-126 was investigated by means of in-beam gamma-ray spectroscopy techniques using the Nordball detector system at the Niels Bohr Institute. Excited states of Cs-126 were populated via the Cd-116(N-14, 4n)Cs-126 reaction at a beam energy of 65 MeV. The Cs-126 level scheme was considerably extended, especially at negative parity and about 40 new levels and 70 new transitions were added into the level scheme. The previously reported negative-parity rotational bands, built on pi g(7/2)circle times nu h(11/2),pi d(5/2)circle times nu h(11/2),pi h(11/2)circle times nu g(7/2), and pi h(11/2)circle times nu d(5/2) configurations, have been extended and evolve into bands involving rotationally aligned (pi h(11/2))(2) and (nu h(11/2))(2) quasiparticles. Two new rotational bands have been tentatively assigned the pi h(11/2)circle times nu s(1/2) and pi g(9/2)circle times nu h(11/2) configurations, respectively

Candidate chiral doublet bands in the odd-odd nucleus Cs-126

The candidate chiral doublet bands recently observed in Cs-126 have been extended to higher spins, several new linking transitions between the two partner members of the chiral doublet bands are observed, and gamma-intensities related to the chiral doublet bands are presented by analyzing the gamma-gamma coincidence data collected earlier at the NORDBALL through the Cd-116(N-14, 4n)Cs-126 reaction at a beam energy of 65 MeV. The intraband B(M1)/B(E2) and interband B(M1)(in)/B(M1)(out) ratios and the energy staggering parameter, S(I), have been deduced for these doublet bands. The results are found to be consistent with the chiral interpretation for the two structures. Furthermore, the observation of chiral doublet bands in Cs-126 together with those in Cs-124, Cs-128, Cs-130, and Cs-132 also indicates that the chiral conditions do not change rapidly with decreasing neutron number in these odd-odd Cesium isotopes.

Theoretical study of the 4d photoabsorption of the Cs+ ion

Calculations of the 4d absolute photoabsorption cross sections of the Xe-like Cs+ ion covering the energy region from 80 to 190 eV have been performed by using the multi-configuration Dirac-Fock method. The calculated cross sections are compared with the absolute experimental photoabsorption cross-section spectrum (Kjeldsen et al 2002 J. Phys. B: At. Mol. Opt. Phys. 35 2845) and other available theoretical results. In the 80-90 eV region, the discrete structure resulting from photoexcitation of a 4d electron into nf and np orbits are successfully identified. Above the 4d threshold, i.e. in the 90-190 eV energy region, a reasonable agreement between experiment and computations is found for the intense 4d -> epsilon f shape resonance.

Dynamic Measurement System for Dipoles of RCS for CS

A dynamic measurement system was developed by the Institute of Modern Physics (IMP) for the dipole prototype of Rapid Cycle Synchrotron (RCS) of China Spallation Neutron Source (CSNS). The repetition frequency of RCS is 25 Hz. The probe is a moving arc searching-coil, and the data acquisition system is based on the dynamic analysis modular of National Instrument. To get the error of high order harmonics of the field at basic frequency, the hardware integrator is replaced by a high speed ADC with software filter and integrator. A series of harmonic coefficients of field are used to express the varieties of dynamic fields in space and time simultaneously. The measurement system has been tested in Institute of High Energy Physics (IHEP), and the property of the dipole prototype of RCS has been measured. Some measurement results and the repeatability of system are illustrated in this paper.

A study of the effect of shell content on the mechanical properties of polycarbonate/poly(butyl acrylate)-cs-poly(methyl methacrylate) blends

The toughening effect of the shell content of a core-shell latex polymer poly(butyl acrylate) (PBA)-cs-poly(methyl methacrylate) (PMMA) on its blends with polycarbonate (PC) was studied. The changes of mechanical properties, morphology, and compatibility of the blends of PC/PBA-cs-PMMA with the change of the shell thickness of PBA-cs-PMMA were investigated. It is interesting to notice that mechanical properties of the blends are very sensitive to the shell thickness (i.e., shell content), and that there is a possibility to adjust the impact and tensile properties of the blend by selecting a PBA-cs-PMMA with a proper core/shell ratio. Hence, a modified PC material with balanced mechanical properties may be prepared.

Effect of the core-shell latex polymer content on the compatibility, morphology and mechanical properties of PC/PBA-cs-PMMA blends

The toughening effect of the content of a core-shell poly(butyl acrylate)/poly(methyl methacrylate) latex polymer (PBA-cs-PMMA) on the mechanical properties, morphology and compatibility of its blends with polycarbonate(PC), i.e., PC/PBA-cs-PMMa, was studied. The mechanical properties of the blends are strongly affected by varying the content of PBA-cs-PMMA in the blend. When the PBA-cs-PMMA content is only 5 wt.-%, the impact strength of PC/PBA-cs-PMMA is almost 19 times as high as that of pure PC, indicating that PBA-cs-PMMA is a very good impact modifier for PC. With increasing interphacial layer thickness and decreasing interphacial tension, the interphacial activity becomes more and more effective and, at the same time, miscibility increases too.