热浸铝钢等离子体电解氧化陶瓷层的微观力学特性

采用纳米压入方法表征了热浸镀铝钢表面由Al2O3层、Al层和FeAl层组成的复合涂层的纳米硬度、弹性模量及断裂韧性等微观力学性能，采用扫描电镜（SEM）观察了纳米压痕形貌，并分析了孔洞对陶瓷层的纳米压入行为和压痕裂纹扩展的影响．结果表明：等离子体电解氧化（PEO）陶瓷层中包含许多微米和亚微米尺度的细小孔洞，陶瓷层弹性模量约为226．4 GPa，纳米硬度约为19．6 GPa．当纳米压入深度为250nm时，所测得陶瓷层的力学参数分散性较大．与FeAl层比较，PEO陶瓷层具有较高的裂纹扩展阻力．FeAl层纳米压痕顶端产生了沿直线扩展的径向裂纹；而陶瓷层纳米压痕中除径向裂纹外出现了侧边裂纹．

热等离子体技术:现状及发展方向

试图从以下４个方面对热等离子体材料加工现在以及将来的研究与发展进行评价：（１）热等离子体涂镀技术；（２）热等离子体微细粉末合成；（３）热等离子体处理废物；（４）热等离子体球化及致密化．一般来讲，由于热等离子体加工由大量参数决定，实行控制非常必要．在某些情况下，缺乏足够的控制以及经济方面的一些不利因素是热等离子体技术成长的主要障碍．但是，目前的研究与开发工作正在致力于解决这些问题

二维抛物化稳定性方程的特征和次特征

特征分析表明：对原始扰动量的抛物化稳定性方程组（PSE），它在亚、超音速区分别具有椭圆和抛物特性，给出PSE特征对马赫数的依赖关系，阐明PSE仅把信息对流-扩散传播特性抛物化，而保留了信息对流-扰动传播特性，因此PSE应称为扩散抛物化稳定性方程（DPSE）。

Adiabatic shear localization: occurrence, theories, and applications

燃烧物理学基础

高等断裂力学

《高等断裂力学》系统论述断裂力学的基本概念、理论基础、力学原理、分析方法以及断裂力学的实验测定和工程应用。深入阐明了断裂力学各个重要发展阶段的新颖学术思想和原创性工作，同时融会贯通地介绍了国内学者在作者熟悉的若干领域内的创造性贡献。　　《高等断裂力学》共14章。第1章介绍断裂力学的历史背景和发展脉络；第2～5章介绍线弹性断裂力学；第6～8章论述弹塑性断裂力学；第9及第10章分别介绍疲劳裂纹扩展和界面裂纹；第11～14章阐述裂纹体弹性动力学和裂纹动态扩展。　　《高等断裂力学》适合从事断裂力学研究和应用的科技工作者及工程师使用和参考，也可供力学专业的高年级本科生和研究生阅读参考.

The calculation of photoelectron angular distributions with jet-like structure from scattering theory

Photoelectron angular distributions produced in above-threshold ionization (ATI) are analysed using a nonperturbative scattering theory. The numerical results are in good qualitative agreement with recent measurements. Our study shows that the origin of the jet-like structure arises from the inherent properties of the ATI process and not from the angular momentum of either the initial or the excited states of the atom.

Space-resolved spectral diagnosis of line-shaped laser-produced magnesium plasmas

Space-resolved spectra of line-shaped laser-produced magnesium plasmas in the normal direction of the target have been obtained using a pinhole crystal spectrograph. These spectra are treated by a spectrum analyzing code for obtaining the true spectra and fine structures of overlapped lines. The spatial distributions of electron temperature and density along the normal direction of the target surface have been obtained with different spectral diagnostic techniques. Especially, the electron density plateaus beyond the critical surface in line-shaped magnesium plasmas have been obtained with a fitting technique applied to the Stark-broadened Ly-alpha wings of hydrogenic ions. The difference of plasma parameters between those obtained by different diagnostic techniques is discussed. Other phenomena, such as plasma satellites, population inversion, etc., which are observed in magnesium plasmas, are also presented.

Time and space-resolved measurement of a gas-puff laser-plasma x-ray source

The dynamic interaction processes between a nano-second laser pulse and a gas-puff target, such as those of plasma formation, laser heating, and x-ray emission, have been investigated quantitatively. Time and space-resolved x-ray and optical measurement techniques were used in order to investigate time-resolved laser absorption and subsequent x-ray generation. Efficient absorption of the incident laser energy into the gas-puff target of 17%, 12%, 38%, and 91% for neon, argon, krypton, and xenon, respectively, was shown experimentally. It was found that the laser absorption starts and, simultaneously, soft x-ray emission occurs. The soft x-ray lasts much longer than the laser pulse due to the recombination. Temporal evolution of the soft x-ray emission region was analyzed by comparing the experimental results to the results of the model calculation, in which the laser light propagation through a gas-puff plasma was taken into account. (C) 2003 American Institute of Physics.