On the soft wall guiding potentials in realistic quantum waveguides

A transfer matrix method is presented for the study of electron conduction in a quantum waveguide with soft wall lateral confinement. By transforming the two-dimensional Schrodinger equation into a set of second order ordinary differential equations, the total transfer matrix is obtained and the scattering probability amplitudes are calculated. The proposed method is applied to the evaluation of the electron transmission in two types of cavity structure with finite-height square-well confinement. The results obtained by our method, which are found to be in excellent agreement with those from another transfer matrix method, suggest that the infinite square-well potential is a good approximation to finite-height square-well confinement for electrons propagating in the ground transverse mode, but softening of the walls has an obvious effect on the electron transmission and mode-mixing for propagating in the excited transverse mode. (C) 1996 American Institute of Physics.

Fluorescence Hydrogen Peroxide Probe Based on a Microstructured Polymer Optical Fiber Modified with a Titanium Dioxide Film

A highly sensitive microstructured polymer optical fiber (MPOF) probe for hydrogen peroxide was made by forming a rhodamine 6G-doped titanium dioxide film on the side walls of array holes in an MPOF. It was found that hydrogen peroxide only has a response to the MPOF probe in a certain concentration of potassium iodide in sulfuric acid solution. The calibration graph of fluorescence intensity versus hydrogen peroxide concentration is linear in the range of 1.6 x 10(-7) mol/L to 9.6 x 10(-5) mol/L. The method, with high sensitivity and a wide linear range, has been applied to the determination of trace amounts of hydrogen peroxide in a few real samples, such as rain water and contact lens disinfectant, with satisfactory results.

Research on the mechanics of underwater supersonic gas jets

An experimental research was carried out to study the fluid mechanics of underwater supersonic gas jets. High pressure air was injected into a water tank through converging-diverging nozzles (Laval nozzles). The jets were operated at different conditions of over-, full-and under-expansions. The jet sequences were visualized using a CCD camera. It was found that the injection of supersonic air jets into water is always accompanied by strong flow oscillation, which is related to the phenomenon of shock waves feedback in the gas phase. The shock wave feedback is different from the acoustic feedback when a supersonic gas jet discharges into open air, which causes screech tone. It is a process that the shock waves enclosed in the gas pocket induce a periodic pressure with large amplitude variation in the gas jet. Consequently, the periodic pressure causes the jet oscillation including the large amplitude expansion. Detailed pressure measurements were also conducted to verify the shock wave feedback phenomenon. Three kinds of measuring methods were used, i.e., pressure probe submerged in water, pressure measurements from the side and front walls of the nozzle devices respectively. The results measured by these methods are in a good agreement. They show that every oscillation of the jets causes a sudden increase of pressure and the average frequency of the shock wave feedback is about 5-10 Hz.

Effects of convection and solid wall on the diffusion in microscale convection flows

The diffusive transport properties in microscale convection flows are studied by using the direct simulation Monte Carlo method. The effective diffusion coefficient D is computed from the mean square displacements of simulated molecules based on the Einstein diffusion equation D = x2 t /2t. Two typical convection flows, namely, thermal creep convection and Rayleigh– Bénard convection, are investigated. The thermal creep convection in our simulation is in the noncontinuum regime, with the characteristic scale of the vortex varying from 1 to 100 molecular mean free paths. The diffusion is shown to be enhanced only when the vortex scale exceeds a certain critical value, while the diffusion is reduced when the vortex scale is less than the critical value. The reason for phenomenon of diffusion reduction in the noncontinuum regime is that the reduction effect due to solid wall is dominant while the enhancement effect due to convection is negligible. A molecule will lose its memory of macroscopic velocity when it collides with the walls, and thus molecules are hard to diffuse away if they are confined between very close walls. The Rayleigh– Bénard convection in our simulation is in the continuum regime, with the characteristic length of 1000 molecular mean free paths. Under such condition, the effect of solid wall on diffusion is negligible. The diffusion enhancement due to convection is shown to scale as the square root of the Péclet number in the steady convection regime, which is in agreement with previous theoretical and experimental results. In the oscillation convection regime, the diffusion is more strongly enhanced because the molecules can easily advect from one roll to its neighbor due to an oscillation mechanism. © 2010 American Institute of Physics. doi:10.1063/1.3528310

Study on Mechanics Parameters of Unloaded Rock Mass about the Underground Powerhouse of Jin-ping Hydroelectric Station

After the excavation of Jinping underground cavern, a strong expansion appears along the unloading direction of the rock mass, mainly in the type of tensile rupture, accompanied by shear destruction, unloading resulted in significant deterioration of mechanical properties of rock. Based on the in-site investigation of rock mass structure, via analyzing the acoustic testing data, we identify the unloading range of the side walls and the division of rock types, and carry out with the solution of rock mechanical parameters about different unloading zone, providing geological foundation for the supporting design of the following design of the side walls, at the same time, providing reference for the selection of mechanical parameters of other underground excavation engineering with similar geological conditions.

青杨(Populus cathayana Rehd)雌雄植株对锈病和干旱胁迫的生理响应及差异蛋白质组比较

雌雄异株植物对环境的不同响应一直是一个有趣而新颖的研究领域，由于雌雄个体不同的繁殖成本及不同的生存策略，使得雌雄植株在生长、存活、生殖格局、空间分布、资源配置等方面已经表现出明显的不同，在生理和分子水平上也表现出明显的性别间差异。干旱是制约农林业发展的环境因子之一，叶锈病是对杨树危害最严重的病害之一，由于长期进化的结果，不同性别的植物必然对生物和非生物胁迫有着不同的响应。本文以雌雄异株的青杨为模式植物，研究雌雄间在生理、生化、亚细胞结构和蛋白质水平上对生物和非生物胁迫的差异响应。主要研究结果如下： （1） 青杨雌雄植株对锈病胁迫的生理生化差异响应 在正常的对照组中，雄株叶片比雌株叶片有着较高的活性氧自由基产生速率、较高的SOD、POD、PPO 和较低的CAT 活性；在锈病感染的早期阶段， SOD、POD、CAT 活性、活性氧自由基产生速率、H2O2 含量、膜脂过氧化程度和细胞膜的电渗率在雌雄株中都增加，而PPO 仅在雄株中增加明显，APX 仅在雌株中增加明显，并且雌株比雄株有着更严重的锈病感染程度、细胞膜的伤害程度和光合系统II 的破坏程度，雌株有更多的净光合速率、气孔导度和叶绿素a 含量的降低，在同工酶变化上，雌雄间对锈病也显示出不同的表达模式。结果显示，雄株比雌株对锈病有着更好的抗性和更有效的ROS 清除系统。 （2） 青杨雌雄植株对干旱胁迫的生理生化及亚细胞结构的差异响应 与较好水分条件相比，干旱下雄株比雌株有着更高的A-Ci 响应参数，如Rubisco 最大羧化速率、光呼吸速率、暗呼吸速率和最大电子传递速率等。干旱显著地增加了膜脂过氧化程度和游离脯氨酸含量，并且雄株比雌株表现出较低的膜脂过氧化程度，较高的总蛋白和游离脯氨酸含量。无论是中度干旱还是极度干旱，除了CAT 外，雄株比雌株表现为较强的抗氧化酶活性，在同工酶谱带上，雌雄间表现出不同的变化模式，并且有些条带是干旱影响应的，而有些条带是性别特异性的，这些性别特异性条带能够作为鉴定性别快速而准确的标记。干旱显著地影响了线粒体、叶绿体和细胞壁的结构，尤其在中度干旱胁迫下，雄株线粒体和叶绿体比雌株呈现出较好的完整性，并且雄株细胞壁要比雌株更厚。因此， 雄株比雌株表现出更强的干旱忍耐性和更高效的抗氧化酶系统。 （3） 青杨雌雄植株对干旱胁迫的蛋白质组差异响应 用双相电泳检测到雌雄间近1000 个蛋白点，通过对比发现对照组雌雄间有54 个差异蛋白点，干旱下雌雄间有108 个差异点，其中102 个被质谱成功鉴定。对照组雌雄间的差异蛋白主要集中在与光合作用相关蛋白、抗氧化酶、胁迫防御蛋白和一些调节基因表达的蛋白；干旱胁迫下雌雄间差异蛋白明显增多，主要有参与信号转导、调节基因表达、蛋白质加工、转录产物的转录翻译后修饰的调节性蛋白蛋白和参与氧化还原平衡、抗胁迫、细胞壁合成、光合作用、能量代谢、氨基酸代谢和脂肪酸代谢等的功能性蛋白。干旱下这些蛋白的表达量在雌雄中有的表现出相同的表达模式，如干旱下雌雄株中Rubisco 激活酶、小热激蛋白等表达都增加，而有的表现出相反的表达模式，如Rubisco 大亚基的降解片段、羰酸酯酶等在雄株中表达量上调而在雌株中却是下调。因此，雌雄间在蛋白质水平上对干旱胁迫响应的差异是显著的，也是复杂的。 It is an interesting and novel topic that dioecious plants possess different responses to environmental stress. As for the different productive cost and different survive strategy, different sexual plants have shown obviously morphological, physiological and molecular differences. Drought is one of the most worldwidely important environmental stress factors that limit plant growth and ecosystem productivity. Rust disease is one of the economically important diseases in many trees. As a result of the long evolutionary process, male and female plants should show different responses to abiotic and biotic stress. In this paper, using a dioeious tree of Populus cathayana Rehd as a model, we study the sexual differences to drought and rust disease stress in physiological, biochemical, sub-cellular and proteomics levels. The main results are follows: (1) The sexual differences in physiology and biochemistry of poplar to rust disease In controls, males showed higher production of superoxide radicals, higher activities of SOD, POD, PPO and lower CAT activity. Under rust disease, the activities of antioxidant, the content of ROS and the degree of cellular member destroyed were increased in both sexes, except for PPO in diseased males and APX in diseased females. However, females showed more seriously disease severity and cellular member and PS II destroyed degrees. Net photosynthesis rate, transpiration rate and chlorophyll a content were decreased more in diseased females than in males. There were also some different changes inantioxidant isozymes under rust disease. The results suggested that male poplar possessed a more effectively antioxidant system and were more resistant to rut disease than females. (2) The sexual differences in physiology and biochemistry of poplar to drought stress Under drought stress, there were higher rates of RuBP-saturated CO2 assimilation, dark respiration, photorespiratory release of oxygen, the max electron transportrate in CO2-saturated and carboxylation efficiency in males than in females. And males showed lower TBARS and higher proline content. Except for CAT, the activities of other antioxidants were higher in males than in females. Meanwhile, there were obviously differences in isozyme changes between teo sexes. Drought stress obviously destroyed the integralities of chloroplasts and mitochondria and the sexual differences in sub-cellular level were obviously under the moderate water stress. Male cell walls were more sensitive to drought stress than did female. The results suggested males were more resistant to drought stress. (3) The sexual differences in proteomics of poplar to drought stress By 2-D and MS analysis, we identified 102 different protein spots between males and females. Under control conditions, the different proteins were mainly in photosynthesis related proteins, antioxidants, stress response proteins and some gene expression related proteins. Under drought stress, the different proteins were focused on (i) regulated proteins such as signaling conduction, kinase, HSP, gene expressional regulation and protein modification, (ii) functional proteins such as photosynthesis, energy metabolism, antioxidant, redox, stress response, lipid metabolism and amino acid metabolism. Some protein showed the same expressional pattern, while some showed contrary expressional pattern. Thus, the results suggested that sexual differences in proteomics were significant and complex.

A mathematical model of crevice and pitting corrosion—I. The physical model

A predictive and self-consistent mathematical model incorporating the electrochemical, chemical and ionic migration processes characterizing the propagation stage of crevice and pitting corrosion in metals is described. The model predicts the steady-state solution chemistry and electrode kinetics (and hence metal penetration rates) within an active corrosion cavity as a function of the many parameters on which these depend, such as external electrode potential and crevice dimensions. The crevice is modelled as a parallel-sided slot filled with a dilute sodium chloride solution. The cavity propagation rates are found to be faster in the case of a crevice with passive walls than one with active walls. The distribution of current over the internal surface of a crevice with corroding walls can be assessed using this model, giving an indication of the future shape of the cavity. The model is extended to include a solid hydroxide precipitation reaction and considers the effect of consequent changes in the chemical and physical environment within the crevice on the predicted corrosion rates. In this paper, the model is applied to crevice and pitting corrosion in carbon steel.

Fruit anatomy,seed germination and seedling development in the Japanese seagrass phyllospadix

Phyllospadix iwatensis Makino and phyllospadix japonicus Makino have similar frunt morphology and anatomy.The rhomboid fruit of Japanese phyllospadix is dark brown in colour and is characterized by two arms bearing stiff inflected bristles which can act as an anchoring system. The fruit covering consists of a thin cuticular seed coat and pericarp remains mainly fibrous endocarp. In the groove region of the fruit.the cuticular seed coat and endocarp are replaced by nucellus cells with wall in growths and crushed pigment strands with lignified walls.these tissues appera to control the transfer of nutrients to developing seed.the seed is oval with a small embryo and a large hypocotyl. the embryo is straight and simple,with the plumule containing three leaf primordia and a pair of root primordia surrounded by a cotyledon.the hypocotyl has large vontral lobe containing central provascular tissue and two small dorsal lobes.the hypocotyl contains starch.lipid and protein.and acts as a nutrient store.the seed of P.iwatensis has a dormancy period of 2-6 weeks and germination eventually reaches-65%.but is not synchronized.during germination the leaves emerge first.and then after at least three young leaves have formed and abseised.the roots emerge,usually?6 months after the commencement of germination.Utilizaton of the nutrient reserves is initially from the perihpery of the hypocotyl and then progressively towards its centre.

Morphological Adaptations to Drought and Reproductive Strategy of the Moss Syntrichia caninervis in the Gurbantunggut Desert, China

The biological soil crusts (BSCs) in the Gurbantunggut Desert, the largest fixed and semi-fixed desert in China, feature moss-dominated BSCs, which play an indispensable role in sand fixation. Syntrichia caninervis Mitt. (S. caninervis) serves as one of the most common species in BSCs in the desert. In this study we examined the morphological structure of S. caninervis from leafy gametophyte to protonema using light and scanning electron microscopy (SEM). We also examined the relationships between the morphological structure of S. caninervis and environmental factors. We found that: (1) this moss species is commonly tufted on the sand surface, and its leaves are folded upwards and twisted around the stem under dry conditions; (2) the cells on both upper and lower leaf surfaces have C-shaped dark papillae, which may reflect sunlight to reduce the damage from high temperature; (3) the leaf costa is excurrent, forming an awn with forked teeth; and (4) the protonema cells are small and thickset with thick cell walls and the cytoplasm is highly concentrated with a small vacuole. In addition, we also found that the protonema cells always form pouches on the tip of the mother cells during the process of cell polarization. Our results suggest that S. caninervis has, through its life cycle, several morphological and structural characteristics to adapt to dry environmental conditions. These morphological features of S. caninervis may also be found in other deserts in the world due to the world-wide distribution of the species.

Macroporous Pt modified glassy carbon electrode: preparation and electrocatalytic activity for methanol oxidation

Three-dimensional (3D) macroporous Pt (MPPt) with highly open porous walls has been successfully synthesized using the hydrogen bubble dynamic template synthesis and galvanic replacement reaction. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and electrochemical methods were adopted to characterize their structures and properties.

Effect of polydispersity on the self-assembly structure of diblock copolymers under various confined states: A Monte Carlo study

We studied the self-assembly of polydisperse diblock copolymers under various confined states by Monte Carlo simulation. When the copolymers were confined within two parallel walls, it was found that the ordered strip structures appeared alternately with the increase in wall width. Moreover, the wall width at which the ordered structure appeared tended to increase with an increase in the polydispersity index (PDI). On the other hand, the simulation results showed that the copolymers were likely to form ordered concentric strip structures when they were confined within a circle wall.

Synthesis and Characterization of Urea Bridged Hybrid Periodic Mesoporous Organosilica Materials

Urea bridged organic-inorganic hybrid mesoporous SiO2 materials (U-BSQMs) were synthesized through a sol-gel procedure by co-condensation of bis(triethoxysilyl propyl) urea (BSPU) under basic conditions using cetyltrimethylammonium bromide (CTAB) as organic template. X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed the mesoporous structure of the sample. Fourier-transform infrared spectroscopy (FT-IR), solid state CP-MAS NMR spectroscopy of Si-29 (Si-29, CP-MAS NMR) and C-13 (C-13 CP NMR) indicated that most of the Si-C bonds are unbroken during the synthesis process.

Construction of hollow DNA/PLL microcapsule as a dual carrier for controlled delivery of DNA and drug

DNA/poly-L-lysine (PLL) capsules were constructed through a layer-by-layer (LbL) self-assembly of DNA and PLL on CaCO3 microparticles, and then used as dual carriers for DNA and drug after dissolution of carbonate cores. The permeability of DNA/PLL microcapsules was investigated with fluorescence probes with different molecular weights by confocal microscopy. The result revealed that the fluorescence probes were able to penetrate the capsule walls even its molecular weight up to 150 kDa. The resultant capsules were used to load drug model molecules-fluorescein isothiocyanate (FITC)-dextran (4 kDa) via spontaneous deposition mechanism.

Palladium within ionic liquid functionalized mesoporous silica SBA-15 and its catalytic application in room-temperature Suzuki coupling reaction

Initially, pore walls of mesoporous silica SBA-15 with template were modified with chlorotrimethylsilane. Then imidazolium salts were similarly incorporated covalently in the inner pore walls of mesoporous silica SBA-15 albeit without the template. Finally, palladium salts were introduced into the pore channels of the previously processed mesoporous silica via electrostatic interaction. The resulting palladium catalysts demonstrated exceptional activity for the room-temperature Suzuki Coupling reaction in aqueous-organic mixed solvents and good recycling ability for at least 4-6 times.

Preparation of Hollow Carbon and Silicon Carbide Fibers with Different Cross-Sections by using Electrospun Fibers as Templates

Hollow carbon nanofibers with circular and rectangular opening were prepared by using electrospun silica fibers as templates. Silica fibers were synthesized by electrospinning, and they were coated with a carbon layer formed by thermal decomposition and carbonization of polystyrene under a nitrogen atmosphere. Hollow carbon nanofibers with circular and rectangular openings were then obtained after the silica core was etched by hydrofluoric acid. The carbon nanofibers with different morphologies also could be used as templates to fabricate silicon carbide fibers. The silicon carbide fibers with circular and rectangular openings could be obtained by using hollow carbon nanofibers and carbon belts as templates, respectively.