Structure and catalytic properties of magnesia-supported copper salts of molybdovanadophosphoric acid

The structure and stability of magnesia-supported copper salts of molybdovanadophosphoric acid (Cu2PMo11VO40) were characterized by different techniques. The catalyst was prepared in ethanol by impregnation because this solvent does not hurt texture of the water-sensitive MgO and Cu2PMo11VO40. The Keggin-type structure compound may be degraded partially to form oligomerized polyoxometalate when supported on MgO. However, the oligomers can rebuild as the Keggin structure again after thermal treatment in air or during the reaction. Meanwhile, the V atoms migrate out of the Keggin structure to form a lacunary structure, as observed by Fourier transform IR spectroscopy. Moreover, the presence of Cu2+ as a countercation showed an affirmative influence on the migration of V atoms, and the active sites derived from the lacunary species generated after release of V from the Keggin anion. The electron paramagnetic resonance data imply that V5+ autoreduces to V4+ in the fresh catalyst, and during the catalytic reaction a large number of V4+ ions are produced, which enhance the formation of O2- vacancies around the metal atoms. These oxygen vacancies may also improve the reoxidation function of the catalyst. This behavior is correlated to higher catalytic properties of this catalyst. The oxidative dehydrogenation of hexanol to hexanal was studied over this catalyst.

Surface-appropriate lipophobicity - Application in isobutene oligomerization over Teflon-modified silica-supported 12-silicotungstic acid

A series of silica-supported 12-silicotungstic acid catalysts (H4SiW12O40, abbreviated as HSiW), modified with various loadings of Teflon (HSiW/SiO2-Teflon), were prepared by an impregnation method. The surface properties of the catalysts were studied by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), BET, infrared (IR) spectroscopy, NH3-TPD and the Drop Shape Analysis (DSA). SEM results combined with energy-dispersive X-ray (EDX) measurements of HSiW/SiO2-Teflon revealed that F-compound (Teflon) is effectively coated on the catalyst surface. The contact angles for water and oil of 50 wt% HSiW/SiO2 and HSiW/SiO2-Teflon indicate that HSiW/SiO2-Teflon catalyst enhances not only the surface hydrophobicity but also the surface lipophobicity by means of the addition of Teflon. Silica-supported 12-silicotungstic acid modified with Teflon exhibits higher C-8(=) selectivity and longer lifetime than that of silica-supported 12-silicotungstic acid in isobutene oligomerization. Thus, surface-appropriate lipophobicity of catalysts may be effective for decreasing the interaction between coke precursors and the catalyst surface and for removing deposited coke more easily.

Preparation and characterization of luminescent cubic MCM-48 impregnated with an Eu3+ beta-diketonate complex

We report on the preparation of luminescent silica mesoporous molecular sieves (MCM-48) activated by the europium complex Eu(DBM)(3) . 2H(2)O (where DBM = dibenzoylmethane), using a simple wet impregnation method. Different concentrations of Eu(DBM)(3) . 2H(2)O were introduced into the MCM-48 cubic structure, and the resulting samples were washed with ethanol for different times. UV-Vis absorption measurements and thermogravimetric analysis were used to estimate the amount of Eu complex that has been incorporated within the pores of the MCM-48 host. The various samples were characterized by X-ray powder diffraction (XRD), infrared spectroscopy, diffuse reflectance (DR) and fluorescence measurements. The results reveal that Eu complexes have been successfully introduced into the pores of MCM-48 without disrupting the structure. All the impregnated MCM-48 materials show the typical red luminescence of Eu3+ when excited with a UV lamp. Shifts of the absorption maxima were observed in the DR and fluorescence excitation spectra and will be discussed in relation with guest-host interactions between the organic complex and the silica matrix. The decay profiles of the europium luminescence in the different samples were also measured and discussed.

Preparation, characterization and luminescent properties of MCM-41 type materials impregnated with rare earth complex

Hybrid materials incorporating Eu-(TTA)(3). 2H(2)O (7hereafter designated as Eu-TTA, with TTA: thenoyltrifluoroacetone) in unmodified or modified MCM-41 by 3-aminopropyl-triethoxysilane (APTES) were prepared by impregnation method. The obtained materials were characterized using X-ray diffraction (XRD), IR and diffuse reflectance spectroscopy and luminescence spectra. All the hybrid samples exhibited the characteristic emission bands of EU3+ under UV light excitation at room temperature, and the excitation spectra showed significant blue-shifts compared to the pure rare-earth complex. Although the red emission intensity in the modified hybrid was almost the half of the red emission intensity in the pure Eu-TTA complex at room temperature, the hybrid showed a much higher thermal stability due to the shielding character of the MCM-41 host.

Magnetic microsphere and its use in biochemical separation and analysis

Magnetic microsphere comprises a magnetically responsive metal or metal oxide core surrounded by a polymer shell with active groups. Nowadays, methods of directly coating polymer, monomer polymerazation, impregnation, extrusion and biological synthesis are generally used to prepare magnetic particles. This kind of superparamagnetic microspheres can be attached to chemical, biochemical and biological substances by their active groups, then applying a magnetic field to separate from the media. Preparation and utilization of magnetic microspheres in immunoassay, nucleic acid hybrization assay, gene sequencing, cell isolation, enzyme immoblization, receptor isolation and other Gelds are reviewed with 44 references in this paper. Also, the further development is outlooked.

Isobutane/butene alkylation over supported heteropoly acid catalysts: I. Influence of the structure of silica

Catalysts consisting of heteropoly acids (HPAs) supported on different silica and mesoporous molecular sieves have been prepared by impregnation and the sol-gel method, respectively, and their catalytic behavior in fixed-bed alkylation of isobutane with butene has been investigated. The activity, selectivity and stability of the supported-HPA catalysts could be correlated with the surface acidity of the catalysts, the structure of supports as well as the time on stream (TOS). In the fixed-bed reactor, the acidity of the heteropoly acid is favorable to the formation of dimerization products (C-8(=)); especially, the pore size of supports was seen to have an important effect on activity and product distribution of the catalysts. Contrary to the traditional solid-acid catalysts, the supported-HPA catalysts own an excellent stability for alkylation, which makes it possible for these supported catalysts to replace the liquid-acid catalysts used in industry.

A comprehensive investigation of an offshore active fault in the Western Sagami Bay, central Japan

Offshore active faults, especially those in the deep sea, are very difficult to study because of the water and sedimentary cover. To characterize the nature and geometry of offshore active faults, a combination of methods must be employed. Generally, seismic profiling is used to map these faults, but often only fault-related folds rather than fracture planes are imaged. Multi-beam swath bathymetry provides information on the structure and growth history of a fault because movements of an active fault are reflected in the bottom morphology. Submersible and deep-tow surveys allow direct observations of deformations on the seafloor (including fracture zones and microstructures). In the deep sea, linearly aligned cold seep communities provide indirect evidence for active faults and the spatial migration of their activities. The Western Sagami Bay fault (WSBF) in the western Sagami Bay off central Japan is an active fault that has been studied in detail using the above methods. The bottom morphology, fractured breccias directly observed and photographed, seismic profiles, as well as distribution and migration of cold seep communities provide evidence for the nature and geometry of the fault. Focal mechanism solutions of selected earthquakes in the western Sagami Bay during the period from 1900 to 1995 show that the maximum compression trends NW-SE and the minimum stress axis strikes NE-SW, a stress pattern indicating a left-lateral strike-slip fault.

趋磁细菌AMB-1培养条件优化及磁小体变化过程研究

趋磁细菌(Magnetotactic bacteria)的研究是国际微生物学研究热点之一。趋磁细菌体内含有纳米单磁畴的氧化铁/硫化铁(Fe3O4或Fe3S4)晶体，称为磁小体。由于趋磁细菌营养条件要求苛刻，在环境中需要微好氧条件，且营养类型属于化能自养，使得培养趋磁细菌时常遇到问题。 本研究首先通过正交试验优化趋磁细菌AMB-1菌株培养条件，在培养条件铁源为奎尼酸铁0.02 mmol/L，装瓶量75% ，pH值6.7，温度25 ℃时，AMB-1 OD600达到0.440(1.166×109 cells/ml)。同时运用磁收集传代法，使带有磁小体的AMB-1细胞比例占95％以上(Cmag值稳定在1.9-2.0)。 在AMB-1具有较好的生物量，同时又具有较好的含磁小体细胞比例后，研究磁小体的变化过程。通过透射电镜观察磁小体变化过程，发现培养24 h细菌体内已有较小晶体形成(平均27 nm，n=188)且沿长轴分布；48 h晶体长大(平均43 nm，n=203)且形成分段链沿长轴排列；72 h晶体进一步成熟(平均50 nm，n=191)仍以分段链沿长轴排列；随后细菌逐渐衰亡磁小体变小，168 h可见部分自溶细菌中仍有磁小体链(平均37 nm，n=186)；192 h细菌自溶磁小体链(平均33 nm，n=184)分散到环境中。 通过透射电镜在细胞水平上研究趋磁细菌细胞分裂时发现，磁小体在细菌分裂时采用两种分离方式：一种为磁小体分配到两个子细胞；另一种为磁小体只分配到一个子细胞。无磁小体的子细胞，在随后的生长过程又分为两种情况：一种为细胞逐渐产生磁小体，另一种为不再产生磁小体。这种现象的发现，解释了随着传代次数的增多，细菌磁性有所下降的原因(Cmag值降低)。 在对趋磁细菌磁小体合成机制的研究中，常使用基因敲除的办法获得缺陷型，并与野生型对比进行研究。但是，利用基因敲除获得缺陷型不仅操作繁琐并且所得缺陷型不稳定。本研究利用特殊的磁富集传代法，先将带有磁小体的菌体收集并连续传代，筛选获得了高磁菌株；利用这种方法，收集不含磁小体的菌体并连续传代，筛选获得了无磁菌株。 趋磁细菌磁小体在医疗、环保等领域具有广阔应用价值，但是目前由于趋磁细菌难以大规模培养，并且磁小体纯化存在成本高等原因，将磁小体真正实际应用尚有一段距离。通过研究磁小体在趋磁细菌中的变化过程发现，AMB-1菌株在培养192 h后自溶，并且磁小体随着细胞的破碎释放到环境中去。

The Apertospathulidae, a new family of haptorid ciliates (Protozoa, Ciliophora)

We studied the morphology of three rare haptorid ciliates, using live observation and silver impregnation: Apertospathula verruculifera n. sp., Longispatha elegans n. gen., n. sp., and Rhinothrix porculus (Penard, 1922) n. gen., n. comb. Simple ethanol fixation (50-70%, v/v) is recommended to reveal the ciliary pattern of "difficult" ciliates, such as R. porculus, by protargol impregnation. The three genera investigated have a distinct feature in common, viz., a lasso-shaped oral bulge and circumoral kinety, where the right half is slightly to distinctly longer than the left and the circumoral kinety is open ventrally. Thus, they are united in a new spathidiid family, the Apertospathulidae n. fam., which probably evolved from a Bryophyllum-like ancestor by partial reduction of the oral bulge and circumoral kinety. Apertospathula verruculifera has a wart-like process, the palpus dorsalis, at the anterior end of the dorsal brush. The right branch of the circumoral kinety is only slightly longer than the left one. Longispatha elegans has a straight oral bulge and circumoral kinety, the right branch of which extends to the posterior end of the body while the left branch ends in the anterior third of the body. Rhinothrix porculus, a curious ciliate with a snout-like dorsal elongation of the oral bulge, the palpus oralis, has a highly characteristic ciliary pattern: the oral pattern is as in Longispatha, but the bulge and circumoral kinety extend spirally to the posterior end of the body while the somatic kinetics course meridionally. This is achieved by inserting some shortened kinetics in the curves of the oral bulge.

Holosticha hamulata n. sp and Holosticha heterofoissneri Hu and Song, 2001, two urostylid ciliates (Protozoa, Ciliophora) from intertidal sediments of the Yellow Sea

Two marine urostylid ciliates, Holosticha hamulata n. sp. and Holosticha heterofoissneri Hu and Song, 2001, were investigated using live observation and protargol impregnation. Both species were isolated from Korean intertidal sediments of the Yellow Sea. Holosticha hamulata measures about 150 x 25 pro in vivo, and is characterized by a tripartite body shape with a narrow head, an inflated trunk, and a tail that distally projects ventrally forming a hook-like structure. It is the characteristic body shape that distinguishes H. hamulata distinctly from congeners. Holosticha hamulata differs from H. heterofoissneri, possibly the nearest relative, also by the location of the contractile vacuole (ahead of mid-body versus near posterior body third) and the configuration of the macronucleus (on average, 33 scattered nodules assuming a Y-shape versus 17 nodules that may form a U shape). The average number of the macronuclear nodules is a pronounced feature showing great consistency in populations of each species. However, their arrangement is variable in H. heterofoissneri where the nodules are basically scattered or connected by fine fibers forming an elongate U-shape. The location of the contractile vacuole as a taxonomic feature is discussed and a dichotomous key to the species of Holosticha sensu stricto is provided.

Morphology and infraciliature of three species of Metaurostylopsis (Ciliophora, Stichotrichia): M. songi n. sp., M. salina n. sp., and M. marina (Kahl 1932) from sediments, saline ponds, and coastal waters.

Two new urostylid ciliates, Metaurostylopsis songi n. sp. and Metaurostylopsis salina n. sp. and Metaurostylopsis marina (Kahl 1932) are investigated using live observation and protargol impregnation. These species were isolated in Korea from intertidal sediments, saline ponds, and coastal waters. Metaurostylopsis songi is in vivo about 120 pm x 25 mu m, has a slenderly ellipsoidal body, colorless cortical granules in rows on ventral and dorsal body sides, about 54 macronuclear nodules, 28-47 adoral membranelles, five frontal, two or three frontoterminal and six or seven transverse cirri, and 9-12 midventral cirral pairs followed posteriorly by 1-3 single cirri. In vivo M. salina is about 60 pin x 25 mu m, has a pyriform body, colorless cortical granules irregularly arranged, about 45 macronuclear nodules, 18-23 adoral membranelles, three frontal, three to five frontoterminal and two to five transverse cirri, and four or five midventral cirral pairs followed posteriorly by five to seven single cirri. Both species have three marginal cirral rows on each body side and 3 long dorsal kineties. The Korean specimens of M. marina match the Chinese population in all main features. Metaurostylopsis songi differs from M. marina by the more slender body, the number of frontal cirri (invariably five vs. four), and the arrangement of cortical granules (in rows on dorsal and ventral cortex vs. only along dorsal kinetics and anterior body margin). Metaurostylopsis salina differs from its congeners by the distinctly smaller size, the pyriform body shape, the scattered cortical granules (vs. in rows), and number of frontal cirri. It differs from M. marina also by the number of midventral cirral pairs (four or five vs. seven to 11).

Descriptions of Protospathidium serpens (Kahl, 1930) and P-fraterculum n. sp (Ciliophora, Haptoria), two species based on different resting cyst morphology

Protospathidium serpens (Kahl, 1930) is frequent in semiterrestrial and terrestrial habitats worldwide. Conventionally, all populations are considered as conspecific because they have very similar overall morphologies and morphometrics. We studied in detail not only the morphology of the vegetative cells but also the resting cysts using live observation, protargol impregnation, and scanning electron microscopy. These revealed a cryptic diversity and biogeographic pattern in details of the dorsal brush and cyst wall morphology. The cyst wall is spiny in the Austrian specimens, while smooth in the South African and Antarctic populations. Accordingly, P. serpens consists of at least two species: P. serpens (with spiny cyst wall) and P. fraterculum n. sp. (with smooth cyst wall); the latter is probably composed of two distinct taxa differing by the absence (South African)/presence (Antarctic) of a monokinetidal bristle tail in brush row 3, the number of dikinetids comprising brush row 1 (seven versus three), and the total number of brush dikinetids (29 versus 17). Protospathidium serpens is neotypitied with the new population from Austria. The significance of resting cyst morphology is discussed with respect to alpha-taxonomy and overall ciliate diversity.

Two trichodinid ectoparasites from marine molluscs in the Yellow Sea, off China, with the description of Trichodina caecellae n. sp (Protozoa : Ciliophora : Peritrichia)

The morphology and infraciliature of two ectoparasitic ciliates, Trichodina caecellae n. sp. and T. ruditapicis Xu, Song & Warren, 2000, parasitising the gills of marine molluscs from the Shandong coast of the Yellow Sea, China, were investigated following wet silver nitrate and protargol impregnation. T. caecellae was found on the small marine sand clam Caecella chinensis Deshayes and is distinguished mainly by the acute triangle-like blade, the very delicate central part and the needle-shaped ray. T. ruditapicis was studied based on four populations from three clams: two populations from Ruditapes philippinarum (Adams) and one each from Saxidomus purpuratus (Sowerby) and Solen grandis Dunker. All four populations fell within the range of morphometry and agreed closely in the overall appearance of the adhesive disc. However, variability was found in the denticle structure, especially in populations from different host clams. Our observations suggest that denticle morphology may be more or less variable between and within populations, and that such minor differences should not be overestimated. It should be emphasised that, except for the denticle morphology, the bright granules or circles in the centre of the adhesive disc represent another important feature facilitating the identification of this trichodinid species.

Morphology and Molecular Phylogeny of Trimyema koreanum n. sp., a Ciliate from the Hypersaline Water of a Solar Saltern

A new ciliate, Trimyema koreanum n. sp., isolated from hypersaline water (salinity of 293 parts per thousand) from a solar saltern in Korea, was investigated using live observation, protargol impregnation, and gene sequencing. Trimyema koreanum is about 30 x 13 mu m in vivo, has usually 23 longitudinal ciliary rows forming two distinct ciliary girdles visible both in vivo and in protargol impregnation. A third indistinct ciliary girdle as well as a girdle of mucocysts is distinguishable only in impregnated cells. We suggest T. koreanum as a new species, differing from the most similar species, T. marinum, by the presence of two distinct ciliary girdles (T. marinum usually has six ciliary girdles clearly visible in living cells and three anterior spirals that encircle the cell completely). Although the number of known 18S rRNA sequences in the genus Trimyema was limited, the Trimyema group including T. koreanum forms a strong clade. The phylogenetic position confirms that the isolate belongs to the genus Trimyema and is different from previously sequenced species. Trimyema koreanum is able to consume both prokaryotes and small eukaryotes (specifically, the alga Dunaliella sp.).

A new spirofilid ciliate from the yellow sea: Metastrongylidium distichum n gen, n sp (ciliophora, stichotrichia)

The morphology and infraciliature of a new ciliate, Metastrongylidium distichum, isolated from the Yellow Sea, are investigated using live observation and protargol impregnation. Metastrongylidium distichum is about 170 x 40 pm in vivo, clavate to elongate ellipsoidal with bluntly pointed posterior end, and has two macronuclear nodules, six distinctly large buccal and frontal cirri, three dorsal kineties and two each of spiralled ventral and marginal cirral rows. These features indicate a generic allocation in Strongylidium Sterki, 1878. However, the new ciliate has a distinct feature not recognizable in Strongylidiurn, viz., the presence of (three or four) transverse cirri. Thus, we propose a new genus Metastrongylidium for the new species, M distichum nov. gen., n. sp. Metastrongylidium belongs to the family Spirofilidae, where it differs from Mucotrichidium by the lack of postperistomial cirrus and the different frontal and ventral cirral pattern. Metastrongylidium distichum is easily distinguishable from the seemingly similar species Strongylidium californicum Kahl, 1932 by the macronuclear pattern (invariably 2 vs. many nodules). It highly resembles the poorly known species S. contortum (Gelei 1954) Borror, 1972 in the body outline and nuclear pattern, differing in the biotope, the posterior cirral pattern, and the arrangement of right marginal row.