Analysis for temperature and pressure fields in process of hydrate dissociation by depressurization

An improved axisymmetric mathematic modeling is proposed for the process of hydrate dissociation by depressurization around vertical well. To reckon in the effect of latent heat of gas hydrate at the decomposition front, the energy balance equation is employed. The semi-analytic solutions for temperature and pressure fields are obtained by using Boltzmann-transformation. The location of decomposition front is determined by solving initial value problem for system of ordinary differential equations. The distributions of pressure and temperature along horizontal radiate in the reservoir are calculated. The numeric results indicate that the moving speed of decomposition front is sensitively dependent on the well pressure and the sediment permeability. Copyright (C) 2010 John Wiley & Sons, Ltd.

Thermal analysis of microstructural evolution of Al2O3 surface modified layers

Solidification behavior and microstructural evolution of surface modified layers in plasma cladding technique are studied via numerical simulations. Both the coupling effect of temperature and solid volume fraction are considered in the proposed thermal analytical model, by which the transient temperature distributions are calculated and the shape of melting pool is determined. Furthermore, we perform microscopic thermal analysis on the nucleation and growth behaviors of ceramic hardening phases and dendrites, as well as the kinetics of related two-phase flow systems. By comparing with experimental observations, the evolution mechanisms of the morphology of Al2O3 ceramic hardening layer are explained. Based on the above results, a relationship among the scanning velocity of plasma stream, dendritic growth rate and the advancing speed of solid/liquid interface is found, and an energy criterion is proposed for predicting the pushing/engulfing transition of ceramic particles by grain growth fronts. (C) 2009 Elsevier B.V. All rights reserved.

Propulsion characteristics of wing-in-ground effect dual-foil propulsors

Propulsion characteristics of wing-in-ground effect propulsors were investigated using a comparative analysis of thrust and powering characteristics between wing-in-ground (WIG) effect thrusters and traditional screw propellers. WIG thrusters were found to have constant thrust production and efficiency, nearly independent of speed of advance, as contrary to screw propellers, whose optimum efficiency occurs at only one speed point. To produce the same amount of thrust as equivalent screw propellers, WIG thrusters have to work under heavily loaded operating conditions. WIG thrusters were also found to produce a relatively lower but nearly constant efficiency and thrust, independent of speed. Another distinguishing propulsion characteristic revealed for WIG thrusters is that they are capable of operating at much higher speeds, in a range of three to six times that of screw propellers of the same size. While the speed range of screw propellers is mainly limited by their geometric pitch, the speed range of WIG thrusters has no speed limit in ideal fluid. In reality, the speed range is only limited by viscous drag and cavitation, or compressibility, in water or air, respectively. This suggests a potential for WIG thrusters of higher speed application than screw propellers. An experimental investigation and validation of the propulsion system is warranted. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.

Design Study of a Heavily Loaded Ice Class Propeller Using an Advance Panel Method

A design and optimization procedure developed and used for a propeller installed on a twin-semitunnel-hull ship navigating in very shallow and icy water under heavy load conditions is presented. The base propeller for this vessel was first determined using classic design routines under open-water condition with existing model test data. In the optimization process, a panel method code (PROPELLA) was used to vary the pitch values and distributions and take into account the inflow wake distribution, tunnel gap, and cavitation effects. The optimized propeller was able to improve a ship speed of 0.02 knots higher than the desired speed and 0.06 knots higher than the classic B-series propeller. The analysis of the effect of inflow wake, hull tunnel, cavitation, and blade rake angle on propulsive performance is the focus of this paper.

在盐胁迫下外源维生素浸种对小麦发芽及幼苗生长的影响

维生素(Vitamin)又称维他命，为“万年青”产品，是维持人体生命健康必需的一类低分子有机化合物质。维生素对人体健康的作用人们研究很多, 维生素可以增强人体对感染的抵抗力，降低出生缺陷及降低癌症和心脏病发病率等，一旦缺乏，肌体代谢就会失去平衡，免疫力下降，各种疾病，病毒就会趁虚而入；而维生素对作物影响的研究却很少。目前为止，尚无对用维生素浸种的方法来研究外源维生素是否对小麦种子萌发及幼苗生长起调节作用的报道，且对其在小麦抗逆性方面影响的研究甚少，对盐的胁迫抗性研究尚未有人报道。小麦（Triticum aestivum L.）属于拒盐的淡土性作物。盐害不利于小麦生长，严重影响小麦的产量和品质。本研究采用4 种不同维生素VB1、VC、VB6、VPP，分别对供试小麦品种川育12（红皮）、川育16（白皮）小麦浸种后，在一般自然条件下和逆境（盐胁迫条件）下，进行试验。探讨在正常情况下与在不同盐浓度条件下，各维生素及盐浓度对小麦发芽及幼苗生长的影响，并且比较两种不同皮色的小麦在相同盐胁迫条件下的差异表现，同时研究维生素处理的特异性，且哪种维生素对盐害缓解作用最佳。研究结果表明：在无盐胁迫（自然）条件下，对用4 种不同维生素VB1、VC、VB6、VPP 浸种小麦川育12、川育16 后的种子萌发及幼苗生长（幼苗的根长、根重、苗高、苗鲜重）的研究结果表明：4 种外源维生素浸种均对小麦发芽有调节作用，都能提高其最终发芽率。但是提高幅度有所差异。用VB6 浸种后的小麦提高幅度最多，VC 次之，VPP 提高幅度最小。同时，4 种外源维生素浸种对小麦种子的出芽速度及芽后长势也有一定的影响。VB6、VC 处理的小麦种子出芽速度最快，萌发后长势最好；VB1 出芽速度相对较慢，VPP 最慢,但都大于对照；VB1 处理长势略高于对照，VPP 处理的小麦长势则低于对照。从整体来看，VB6、VC处理促进效应明显， VB1 次之，而VPP 在某些方面无效甚至产生负效应。此外，相同的维生素处理对不同的品种的种子萌发、生长效果也存在差异，各种维生素作用于川育12 的效应均强于对川育16。进一步对幼苗根系TTC 还原力及幼苗叶片中硝酸还原酶活性进行测定、分析。研究发现：并非所有种类的维生素对幼苗根系TTC 还原力及幼苗叶片中硝酸还原酶活性的提高都有帮助。幼苗根系TTC 还原力在不同维生素处理下存在显著差异，而与小麦品种关系甚微。经VB6、VC 处理后，根系TTC 还原力测定值均显著高于对照，VB1 不明显，VPP 则略低于对照。VB6、VC 处理的幼苗叶片中硝酸还原酶的含量大于对照，VB1 与对照相差无几，而VPP 处理的川育12 幼苗叶片中的硝酸还原酶活性比对照CK 略高，而在川育16 中则略比对照CK 有所下降，呈现出抑制效应。综上结果表明：VB6、VC 具有促进种子发芽，幼苗生长及根系生长的作用，是较好的促生长剂；VPP 具有抑制作用，是较好的抑制剂，可进一步研究、开发利用。在盐胁迫条件下，对用4 种不同维生素VB1、VC、VB6、VPP 浸种川育12、川育16 后的种子萌发及幼苗生长（幼苗的根长、根重、苗高、苗鲜重）的研究结果表明：在不同盐浓度胁迫条件下， 各处理的种子萌发及幼苗生长均受到不同程度的抑制。随着盐浓度的增加, 发芽率、发芽指数和活力指数成下降趋势；幼苗的根长、根重、苗高、苗鲜重不断降低。4 种维生素处理间也表现出较大差异。VB6、VC 在每个处理中均保持对盐害的缓解作用，VB6 较VC 更易于促进发芽及幼苗生长。最终发芽率高，根系多、长、重，苗高高、重。而VB1、VPP 则表现出抑制作用。在高盐浓度150mM 时，4 种维生素浸种后的种子，其最终发芽率均不能达到40％，但VB6、VC 处理最终发芽率、苗重、根重均高于对照，VPP 最终发芽率、苗重、根重均低于对照。进一步对幼苗根系TTC 还原力及幼苗叶片中脯氨酸含量进行测定、分析。研究发现：不同盐浓度，不同维生素处理、不同品种间存在差异。随着盐浓度的增加（75mM，100mM，150mM），幼苗根系TTC 还原力活性成下降趋势，幼苗叶片中脯氨酸的积累量成上升趋势。VB6 处理脯氨酸含量增加最为明显，VC 次之，VPP 与对照接近，其变化幅度最小。经VB6、VC 处理后的幼苗根系还原强度，在不同盐浓度下，测定值均显著高于对照，VB1 不明显，VPP 则低于对照，产生负效应。此外，品种间表现不尽相同，相同的维生素处理，相同的盐浓度对不同的品种的种子萌发、生长效果也存在差异， 4 种维生素对川育16 的作用均强于川育12，但其影响趋势是一致的。说明VB6、VC 具有耐（抗）盐性，可以促进种子发芽和幼苗生长，是较好的耐（抗）盐拌种剂。 Vitamin is one kind of necessary low molecular compound for humans tosustain health and life. Lots of Studies have been done on the effectc of the vitaminsfor people. Vitamin can help people improve the body's natural resistance to disease,Drop the rate of birth defects、cacers and the incidence of the heart diseases. Ifpeople have less of them, the metabolism of the organism may throw off balance,immunity may drop off, and catch disease; Though the effects for Vitamin to thecrops are limited. up to now, there’s no one use soking seeds of wheats with vitaminsas a method, to study on how the effects will happen on the wheat seed germinationand seedling growth, and there are only few reserches on antireversion force forwheats ,none for the antireversion force in Sault stress condition.Wheat（Triticum aestivum L.）is sensitive to the salt, so the salt damage will doharm to wheat’s growth, it will have an unfavorable impact on the output and thequality of wheat.On this reaserch, we Soaking CHY12(red)、CHY16 (white) wheat seeds withVitamin C, B1, PP, B6 (50mg/L) as a pretreatment first. Then under two condition: one is in the normal environment the other is in different Salinity, we begin ourexperiments. Then disscuss on if the vitamin and salinity affect the wheat seedgermination and seedling growth, and what is the different between the two of them,the result shows that:Under the normal condition, after soaking seeds with VB1、VC、VB6、Vpp，we study on the their seed germination and the seeding growth(the root length andweights, The seedling heights and weights), it shows that all of those four kinds ofvitamin can adjust the seed germination, but different in The growth rate. VB6 isbest for increase, VC comes second,VPP is the worst. Meanwhile, those four vitaminalso have effect on the speed of the sprouting of the wheat. VB6、Vc can faster theseed germination most, and the seedlings are all doing well; VB1 do little effects onthe budding, Vpp is the worst, but all treatments are better than CK; but in Vi, VB1some what above the CK, while VPP lower than that. On the whole, the acceleratingeffect of VB6、VC are obvious, VB1 takes second place, but VPP in some aspects arenoneffective even have negative effect. Furthermore, different kind of seeds with thesame vitamin may different in seed germination and seedling growth, four vitaminson CHY16 is better than CHY12.More studies on TTC reductive capacity of roots and the activity of nitratereductase in the leaves, the reasult shows not all the vitamin can help the seedlings toimprove the TTC reductive capacity and the activity of nitrate reductase. TTCreductive capacity in different treatments shows significant differences,but notcorrelate to the variety of the wheat. The TTC reductive capacity of VB6、Vctreatments are all higher than CK, VB1 is nearly the same as CK, VPP is a littlelower than CK. Through the study of acivity of nitrate reductase, it shows that,VB6、VC are higher than CK ,VB1 is nearly the same as CK also, VPP is a little higher inthe CK of CHY12 but lower in CHY16. Through all the results above: VB6、Vc helpthe wheat seed germination, seedling growth and the growth of roots, is theperfectable factor of stimulating the growth; Vpp is a inhibition, that’ll be furtherreserch,and well develop and utilize in the future.Under the different Salinity condition, after soaking seeds with VB1、VC、VB6、Vpp，we study on the their seed germination and the seeding growth(the root lengthand weights, The seedling heights and weights), it shows that: under differentsalinity, the seed germination and the seedling growth of any treatment are inhibited.With the increase of the concentration, the germination rate, Vi、Gi all had fallen; theroot length and weight, the seedling heights and weights steadily sank down. There are also have pronounced difference between all treatments with four differentvitamins.VB6、VC in all treatments are alleviative the salt damage, VB6 is easier tocause to put forth buds than VC, and it’s quantitative value is the highest in theultimate germination rate, in root and seedlings’ hight and weight. Though the VPP、VB1 are seems to inhibite its growth. Under the high concentration150mM Nacl, theultimate germination rate in all treatments are below the 40%, but VB6、VC’squantitative values in any experiments are higher than CK,while VPP lower thanCK.Then we study on the TTC reductive capacity of roots and the content of Polinein leaves, the result shows that between the different salinity, different vitamintreatments, different varieties of the wheat have discrepancy.along with theincreasing concentraion of the salinity（75mM，100mM，150mM），TTC reductivecapacity of roots decreases, the accumulation of the content of Poline in leaves havean upward trend. The increase of VB6’s treatment are obviously, VC comessecond,VPP is nearly come up with CK, changes a little. In TTC reductive capacity of roots’s reserch, VB6、VC are higher than CK at any time,VB1 is not palpable,VPP is lower than CK, makes negative affect on wheat. In addition, varieties of thewheats are remain different, no matter it shows promoting or inhibiting, all fourvitamins have moreobvious effects on CHY16 than CHY12, but the tendency of theeffection are the same. It is say that VB6、VC can help wheat to standwith the saultwell, and promot in growth，they are the better reagent to mix with the seed.

Characteristics of the sampling paddle modules of neutron wall from the cosmic ray test

In the construction of a large area neutron detector (neutron wall) that is used to detect neutrons at GeV energies, the performances of all the sampling paddle modules prepared for the neutron wall are investigated with a specially designed test bench. Tested by cosmic rays, an average intrinsic time resolution of 222.5 ps is achieved at the center of the modules. The light attenuation length and the effective speed of the light in the module are also investigated.

Characteristics of electroosmotic flow and migration of neutral solutes under stepwise gradient elution of capillary electrochromatography

A theoretical study on the velocity of electroosmotic flow (EOF) and the retention times of neutral solutes under multiple-step gradient of capillary electrochromatography (CEC) was carried out, focusing on that with three kinds of mobile phases. Through the model computations, the detaining time of the second kind of mobile phase in the column was proved to play an important role in affecting EOF. The variation speed of EOF was shown to be determined by the differences among dead times in different steps. In addition, the prediction of the retention times of 13 aromatic compounds under gradient mode was performed with the deduced equations. A relative error below 3.3% between the calculated and experimental values was obtained, which demonstrated the rationality of the theoretical deduction. Our study could not only improve the comprehension of stepwise gradient elution, but also be of significance for the further optimization of separation conditions in the analysis of complex samples.

Migration of large-scale subaqueous bedforms measured with seagrasses(Cymudocea nodesa) as tracers

The vertical growth of seagrasses in response to burial by migration of bedforms is combined with dating techniques to provide precise and rapid estimates of the migration speed of subaqueous dunes over seagrass patches. Two methods to estimate the time interval between the passage of successive dunes and the motion of single dunes through seagrass patches are described. The second method is more precise. The application of these methods to vegetated (Cymodocea nodosa) subaqueous dunes in the Alfacs Bay (NW Mediterranean) showed that the dunes traveled at an average speed of $13.0 \pm 0.6 m yr^-1$ and demonstrated that the methods can resolve migration speeds from 0.15 to $980 m yr^-1$ with this particular seagrass species. In areas vegetated with different seagrass species, bedform migration can be estimated over different time scales. The strong coupling between seagrass and sediment dynamics resembles the coupling of vegetation and land dunes.

Fruit anatomy,seed germination and seedling development in the Japanese seagrass phyllospadix

Phyllospadix iwatensis Makino and phyllospadix japonicus Makino have similar frunt morphology and anatomy.The rhomboid fruit of Japanese phyllospadix is dark brown in colour and is characterized by two arms bearing stiff inflected bristles which can act as an anchoring system. The fruit covering consists of a thin cuticular seed coat and pericarp remains mainly fibrous endocarp. In the groove region of the fruit.the cuticular seed coat and endocarp are replaced by nucellus cells with wall in growths and crushed pigment strands with lignified walls.these tissues appera to control the transfer of nutrients to developing seed.the seed is oval with a small embryo and a large hypocotyl. the embryo is straight and simple,with the plumule containing three leaf primordia and a pair of root primordia surrounded by a cotyledon.the hypocotyl has large vontral lobe containing central provascular tissue and two small dorsal lobes.the hypocotyl contains starch.lipid and protein.and acts as a nutrient store.the seed of P.iwatensis has a dormancy period of 2-6 weeks and germination eventually reaches-65%.but is not synchronized.during germination the leaves emerge first.and then after at least three young leaves have formed and abseised.the roots emerge,usually?6 months after the commencement of germination.Utilizaton of the nutrient reserves is initially from the perihpery of the hypocotyl and then progressively towards its centre.

Rapid fabrication of Au nanoparticle films with the aid of centrifugal force

In this work, rapid fabrication of Au nanoparticle (Au NP) films has been simply achieved by alternate adsorption of citrate-stabilized Au NPs and poly(diallyldimethylammonium chloride) with the aid of centrifugal force. In contrast to conventional electrostatic assembly, we carried out the assembly process in a centrifuge with a rotating speed of 4000 rpm, where centrifugal force can be imposed on Au NPs. Scanning electron microscopy and cyclic voltammetry were employed to characterize the assembly procedure and the thus-prepared thin solid films. Our results demonstrate that centrifugal force can promote the assembly of Au NPs and therefore enable the rapid fabrication of functional Au NP films.

Robustness and Coherence of a Three-Protein Circadian Oscillator: Landscape and Flux Perspectives

Three-protein circadian oscillations in cyanobacteria sustain for weeks. To understand how cellular oscillations function robustly in stochastic fluctuating environments, we used a stochastic model to uncover two natures of circadian oscillation: the potential landscape related to steady-state probability distribution of protein concentrations; and the corresponding flux related to speed of concentration changes which drive the oscillations. The barrier height of escaping from the oscillation attractor on the landscape provides a quantitative measure of the robustness and coherence for oscillations against intrinsic and external fluctuations. The difference between the locations of the zero total driving force and the extremal of the potential provides a possible experimental probe and quantification of the force from curl flux. These results, correlated with experiments, can help in the design of robust oscillatory networks.

Mechanical properties and miscibility of polyethersulfone phenoxy blends

The blends of polyethersulfone and phenoxy were prepared by melt mixing in a Brabender-like apparatus. The specimens for measurements were made by compression molding and then were water-quenched at room temperature under pressure. The tensile strength, tensile modulus, elongation at break and yield, density, thermal analysis, and dynamic mechanical properties were each measured. The dependence of tensile strength, tensile modulus, elongation at break and yield, and density on composition was obtained. The relationship between tensile modulus and elongation at break and yield and speed of the crosshead at different weight ratios of the blends is shown. The effects of composition and miscibility on the mechanical properties are discussed. (C) 1996 John Wiley & Sons, Inc.

THE CHARACTERIZATION OF 2 COPPER PHTHALOCYANINE LANGMUIR-BLODGETT-FILMS AND THEIR GAS-SENSITIVE PROPERTIES

The monolayer and deposition behaviour of a symmetrically substituted copper tetra-4-(2, 4-di-t-amylphenoxy) phthalocyanine (tapCuPc) and an asymmetrically substituted copper [tri-4-(2, 4-di-t-amylphenoxy)-mono-4-(-2-methoxyethoxy)]phthalocyanine (AsyCuPc) were investigated. The results on monolayer behaviour and spectroscopic characterization of the LB films show that both CuPc molecules in a monolayer at the air-water interface and the LB films are stacked and inclined. The gas-sensitive properties show that the responding speed of AsyCuPc LB film is faster than that of tapCuPc LB film.

Product monitoring and quantitation of oligosaccharides composition in agar hydrolysates by precolumn labeling HPLC

Since the discovery of multiple bioactivities for agarobiose oligomers, a quantitative method has been in great need to monitor the agarobiose oligomers. This report demonstrates that agarobiose oligomers can be separated with high resolution in HPLC after introducing a-naphthylamine into compounds. Agarobiose oligomers ranged from biose to decaose were isolated by Sephadex column. HPLC analysis indicated that each oliomer could be quantified with good linearity and a low detection limit of 0.1-4 mug/ml. The chromatographic profiles of agaro-oligosaccharides with different hydrolysis modes (hydrochloride, citric acid, solid acid, and hydroxyl radical degradation) showed that agarobiose could be obtained more than 57.8% using solid acid mediated hydrolysis, while hydrochloride acid could degrade agar into a series of agaro-oligosaccharides from biose to decaose. The yield of oligosaccharides was low if hydrolyzed by citric acid. The Fenton degradation can increase the speed of hydrolysis, but the product was complex. (C) 2004 Elsevier B.V. All rights reserved.

Characterization of the life history of Bangia fuscopurpurea (Bangiaceae, Rhodophyta) in connection with its cultivation in China

Bangia fuscopurpurea (Rhodophyta) was cultivated in Putian (Fujian province, China). The characteristics of the life history concerned with cultivation were investigated and the cultivation procedure was presented. The gametophytic phase (thallus) and the sporophytic phase (conchocelis) occurred alternately in the life history of B. fuscopurpurea. Young thalli produced archeospores, and the number depended on the environmental factors. Temperature affected the number of archeospore release and percent of germination, and photo flux density (PFD) mainly affected the time of spore release and germination. Thalli matured from December to February and developed into the conchocelis phase through sexual reproduction. The conchocelis grown in shells had three developmental stages: vegetative conchocelis, conchosporangiall formation and conchospore formation. Pit-connections were present in the first 2 stages but absent after conchospore formation. Vegetative conchocelis and conchosporangial. branches can transform into each other. However, conchospores only developed into the gametophytic phase. Cultivation of B. fuscopurpurea was based on characterization of the life history, consisting of 3 steps: zygotospores collection, indoor cultivation of conchocelis and outdoor cultivation of thalli. Young thalli that developed from conchospores produced numerous archeospores before December. Over 90% of the crop was from the development of archeospores. The results indicated that conchosporelings were a good source of archeospores, and the development of the large quantity of archeospores acted as a more prevailing means to increase the population size. (C) 2008 Elsevier B.V. All rights reserved.