79 resultados para Salmo 137
Resumo:
虽然防护林用于减小风速、控制热量和水汽传递及污染物扩散、改善气候与环境、增加作物产量等已经有几百年了,但直到近几十年,人们才开始系统地研究防护林空气动力学的遮蔽机制.在本综述中,我们考察了绕防护林带的流动与湍流控制机制,最新的模型与数值模拟研究情况;通过数值模拟与实验数据的比较,来了解防护林带结构与防风效果之间的关系;讨论数值分析如何及为什么能够得到所需要的结果.本文将从多孔隙防护林带流动基本方程组的推导开始,讨论数值模型及模拟过程,对附体与分离流动进行预测;分析了遮蔽机制与动量交换;对风向、防护林密度、宽度和三维性对流动与湍流的影响作了系统的论述.还对热流和土壤水分蒸发的新模型及数值模拟作了简述.最后,我们对网络工作站、群和高性能分布式并行计算机及其对防护林带模型预报能力的提高作了讨论.
Resumo:
目录
- 1.1 化合物的生成焓,反应焓及燃烧热
- 1.2 热化学定律
- 1.3 热力学平衡与自由能,化学平衡与反应自由能
- 1.4 质量作用定律及可逆反应的平衡常数
- 1.5 平衡常数和标准反应自由能的关系
- 1.6 温度和压力对平衡常数的影响
- 1.7 绝热火焰温度计算
- 1.8 化学动力学中采用的几个基本概念和定义
- 1.9 反应的分类
- 1.10 阿累尼乌斯(Arrhenius)定律
- 1.11 双分子反应碰撞理论
- 1.12 反应分子数及反应级数
- 1.13 影响化学反应的因素
- 1.14 链锁反应
- 5.1 燃烧波的两种形式――缓燃(或火焰正常传播)及爆震
- 5.3 马兰特和利-恰及利耶的简化分析法
- 5.4 层流火焰传播速度的无量纲分析法
- 5.5 泽尔多维奇和弗朗克-卡门涅茨基的分区近似解
- 5.6 分区近似解的改进
- 5.7 精确解
- 5.8 物理化学参数对S1的影响及对火焰厚度的影响
- 5.9 火焰传播界限
- 5.10 用层流火焰传播速度计算化学动力参数的方法
- 5.11 火焰的基本性质及火焰的几何学
- 5.12 本生灯火焰稳定的条件
- 5.13 层流火焰传播速度的实验测定
- 5.14 单组元燃料滴燃烧
Resumo:
Through a systematical analysis of the elastic moduli for 137 metallic glasses (MGs) and 56 polycrystalline metals, we use a simple model developed by Knuyt et al. [J. Phys. F: Met. Phys. 16 (1986) p.1989; Phil. Mag. B 64 (1991) p.299] based on a Gaussian distribution for the first-neighbor distance to reveal the short-range-order (SRO) structural conditions for plasticity of MGs. It is found that the SRO structure with dense atomic packing, large packing dispersion and a significant anharmonicity of atomic interaction within an MG is favorable for its global plasticity. Although these conditions seem paradoxical, their perfect matching is believed to be a key for designing large plastic bulk MGs not only in compression but also in tension.
Resumo:
利用量纲分析研究限定型高压扭转(HPT)变形的相关因素,在此基础上用有限元分析不同侧边摩擦条件和不同径厚比和不同侧面摩擦约束大小对纯铜试样角位移场的特点,讨论理想高压扭转公式适用的范围.量纲分析揭示,试样上变形与几何位置、径厚比、施加压力、材料弹性参数以及模具侧面的摩擦状况相关.有限元分析结果表明,可用幂函数形式的角位移约束来简化侧面摩擦,当幂指数不小于8时,试样上非HPT变形区域大小趋于稳定;当径厚比不小于5时,试样中心存在一个可用纯扭转变形描述的区域,非理想HPT区域大小不超过试样厚度尺寸;当径厚比不大于2时,试样上不存在理想HPT区域.
Resumo:
A 120TW/36fs laser system based on Ti:sapphire chirped-pulse amplification (CPA) has been successfully established in our lab. The final four pass Ti:sapphire amplifier pumped by an energetic single-shot Nd:YAG-Nd:glass laser was designed and optimized. With 24J/8ns pump energy at 532 nm, 300 mJ/220 ps chirped pulse was amplified to 5.98 J in this amplifier, and a total saturated gain of similar to 20 was achieved. The focused intensity of compressed beam could reach to 10(20) W/cm(2) with the M-2 of similar to 2.0. (c) 2005 Elsevier Ltd. All rights reserved.
Resumo:
Optical parametric chirped pulse amplification with different pump wavelengths was investigated using LBO crystal, at signal central wavelength of 800 nm. According to our theoretical simulation, when pump wavelength is 492.5 nm, there is a maximal gain bandwidth of 190 nm. centered at 805 nm in optimal noncollinear angle using LBO. Presently, pump wavelength of 492.5 nm can be obtained from second harmonic generation of a Yb:Sr-5(PO4)(3)F laser. The broad gain bandwidth can completely support similar to 6 fs with a spectral centre of seed pulse at 800 nm. The deviation from optimal noncollinear angle can be compensated by accurately tuning crystal angle for phase matching. The gain spectrum with pump wavelength of 492.5 nm is much better than those with pump wavelengths of 400, 526.5 and 532 nm, at signal centre of 800 nm. (c) 2005 Elsevier B.V. All rights reserved.
Resumo:
利用低功率飞秒激光振荡器进行材料表面加工的研究并将其应用于微光学元件的加工制作领域;对飞秒激光倍频光以及飞秒激光与光刻胶材料相互作用进行了实验;以光刻胶作为牺牲层进行表面加工获得了各种玻璃光栅及光掩模板;利用光学显微镜和原子力显微镜(AFM)对实验结果进行检测,得到微米量级的特征线宽;所得光栅的光学性能通过HeNe激光器进行检测,实验结果与理论值一致。该研究为微光学元件的加工制作提供了新的方法。
Resumo:
为了使光学系统更加紧凑化和稳定化,本文提出了一种单晶集成的1×N电光开关:它有2个折射面,4个互相垂直的全内反射面,和N-1个电光调制器.还得到了该种1×N电光开关的构成条件:发生两相邻反射的反射面必须互相垂直.并对晶体的结构进行了优化,通过调整光束输出面与光轴的夹角来改变光束出射角,使得接收端易于接收输出的光信号.给出1×3电光开关的实例.
Resumo:
A new Yb-doped oxyorthosilicate laser crystal, Yb:Gd2SiO5 (Yb:GSO), has been grown by the Czochralski (Cz) method. The crystal structure was determined by means of X-ray diffraction analysis. Room temperature absorption and fluorescence spectra of Yb3+ ions in GSO crystal were measured. Then. spectroscopic parameters of Yb:GSO were calculated and compared with those of another Yb-doped oxyorthosilicate crystal Yb:YSO. Results indicated that Yb:GSO crystal seemed to be a very promising laser gain media in generating ultra-pulses and tunable solid state laser applications. As expected, the output power of 2.72 W at 1089 nm was achieved in Yb:GSO crystal with absorbed power of only 4.22 W at 976 nm, corresponding to the slope efficiency of 71.2% through the preliminary laser experiment. (c) 2005 Elsevier Ltd. All rights reserved.
Resumo:
In this paper, some results on visible luminescence performed on Yb3+-doped gadolinium gallium garnets under 165 and 940 nm excitation were presented. The upconversion luminescence was ascribed to Yb3+ cooperative luminescence and the presence of rare earth impurity ions. The gain cross-sections of Yb:GGG crystal as a function of excited-state population fraction P were studied. Emission spectra under 165 nm at 20 K showed there was no charge transfer luminescence in Yb:GGG. (c) 2006 Elsevier B.V. All rights reserved.
Resumo:
采用气相传输平衡技术在掺Sr^2+的α-BBO(001)衬底上制备了β-BBO薄膜,研究了粉料配比、VTE处理温度以及恒温时间对薄膜质量的影响。结果表明,在适当的粉料配比、VTE处理温度以及恒温时间下,在Sr^2+:α-BBO晶片表层制备呈c轴高度择优取向的、没有第二相物质的β-BBO薄膜,其双晶摇摆曲线半峰宽值FWHM为1000",显示出β-BBO薄膜较好的结晶质量。并对气相传输平衡技术制备β-BBO薄膜的机理进行了初步的探讨。