AN INFRARED SPECTROSCOPIC STUDY OF THE STRUCTURAL PHASE-TRANSITION IN THE PEROVSKITE-TYPE LAYER COMPOUND [N-C16H33NH3]2COCL4

The solid-solid phase transitions in the perovskite-type layer compound [n- C16H33NH3]2CoCl4 have been studied by infrared spectroscopy. A new phase transition at 340 K was found by comparison with differential scanning calorimetry results. A temperature dependence study of the infrared spectra provides evidence of the occurrence of structural phase transitions related to the dynamics of the alkylammonium ions and hydrogen bonds. The main transition at 374 K corresponds to the conformational order-disorder change in the chain, which probably couples with reorientational motions of the NH3 polar heads. GTG or GTG' defects appear in the high temperature disordered phase.

P wave velocity of the pumice from the Okinawa Trough at high temperature and high pressure.

P wave velocity of the pumice sample from the middle Okinawa Trough and andesite sample from vicinity Yingdao volcanic island, Kyushu Japan were measured at temperature (from room temperature to 1500 C) and pressure (from room pressure to 2.4GPa) using a multi-anvil pressure apparatus called the YJ-3000 press. The measured data shows that at low temperature and low pressure (<1GPa, <800degreesC), the P wave velocity of pumice is lower than that of andesite, while at high temperature and high pressure (>1GPa, >800degreesC) the P wave velocity of pumice and andesite. becomes consistent (5.9km/s). The paper points out that 1GPa/800degreesC is the point of thermodynamic phase transformation Okinawa Trough pumice and vicinity andesite, and the point is deeper than 18km.

On the western boundary currents in the Philippine Sea

In this study we describe the velocity structure and transport of the North Equatorial Current (NEC), the Kuroshio, and the Mindanao Current (MC) using repeated hydrographic sections near the Philippine coast. A most striking feature of the current system in the region is the undercurrent structure below the surface flow. Both the Luzon Undercurrent and the Mindanao Undercurrent appear to be permanent phenomena. The present data set also provides an estimate of the mean circulation diagram (relative to 1500 dbar) that involves a NEC transport of 41 Sverdrups (Sv), a Kuroshio transport of 14 Sv, and a MC transport of 27 Sv, inducing a mass balance better than 1 Sv within the region enclosed by stations. The circulation diagram is insensitive to vertical displacements of the reference level within the depth range between 1500 and 2500 dbar. Transport fluctuations are, in general, consistent with earlier observations; that is, the NEC and the Kuroshio vary in the same phase with a seasonal signal superimposed with interannual variations, and the transport of the MC is dominated by a quasi-biennial oscillation. Dynamic height distributions are also examined to explore the dynamics of the current system.

NONLINEAR GRAVITY-WAVES IN DEEP-WATER

In consideration of the problem on the boundary condition of nonlinear free water wave, coordinate transform is used to handle the free boundary. Supposing the solution form be the traveling wave, the ordinary differential equations of the one-order autonomous system with two variables are caused, then expanding the nonlinear terms at the equilibrium point with the Taylor expansion, we obtained the solution to traveling wave. The linear approximate equation near the equilibrium point is the small amplitude wave. A new nonlinear periodic traveling wave and nonlinear dispersion relation are shown when expanding to the second-order terms. A conclusion that the expansion of dispersion relation does not contain any odd-power terms of wave steepness and because of the nonlinear effort an oscillate structure is produced in the vertical direction is drawn.

红毛菜发育过程及其生理基础

红毛菜（Bangia Lyngb.）属于红藻门，与紫菜属同属红毛菜科，其味道和营养都优于紫菜。目前红毛菜栽培产业已在我国福建莆田展开，但栽培技术还有待提高。海藻栽培技术的发展和成熟依赖于对其生长发育过程的认识。本研究针对红毛菜发育过程及相关光合生理展开，并初步探讨了一采自山西娘子关泉淡水红毛菜群体（FWB）的系统地位。 色素突变标记的壳孢子萌发特征表明最初两次分裂产生的4细胞决定了完整植株的形态建成。成熟植株，为雌雄异体。雌性生殖器果胞的标志性分化结构为原始受精丝，环境因子是促发原始受精丝发展的外部因素，其膨大程度随受精的延迟而增大。原孢子是主要的无性生殖孢子类型，在不良环境中，藻体也会形成内生孢子或休眠包囊，或者藻体断裂后重新形成完整的植株。 红毛菜的生长发育很大程度上受环境因子的控制。高温不利于配子体的发育，15-20 ºC比较适宜。红毛菜无性繁殖的最适温度-光照组合为20 ºC-8 h，有性繁殖为15 ºC-12h。 不同发育阶段，PSII实际光合效率（Y(II)）与细胞的健康状况以及光合器官完整性及其在细胞内的分布有关，而与细胞的类型关系不大。健康的假根细胞、已分化未成熟的精子以及果孢子细胞均具有很高的Y(II)。色素体由中间位变为围周位，中央大液泡（营养藻丝）和大小纤维囊泡（成熟孢子与精子）的产生，使得细胞Y(II)降低。刚放散的壳孢子Y(II)很低，说明在壳孢子由贝壳基质释放到自由水体过程，光合作用受到一定程度抑制；而2h后，Y(II)开始恢复，rbcL的转录水平非常高，为孢子的萌发储备物质和能量需求。 在失水和低盐胁迫下，藻体均维持较高的Y(II)。干出处理至藻体重量不再变化，复水后Y(II)可回复初始水平。海生红毛菜在100％淡水培养基中（约20ºC）培养7天后，部分雄性藻体依然活着。从而体现了红毛菜位居高潮带的生理优势。 FWB终生行无性繁殖，藻体形态与发生以及染色体数目（4条）与海生群体没有区别。而rbcL-rbcS Spacer序列显示，红毛菜海生群体（无性和有性）具有完全相同的序列，而FWB与它们有5bp差异，但是与欧洲、北美地区的淡水群体仅1bp不同，初步说明所有淡水红毛菜群体具有共同的原始起源。

Organochlorine micropollutants in the Jiulong River Estuary and Western Xiamen Sea, China

Organochlorine contaminants including 12 polychlorinated biphenyl (PCB) congeners and 18 insecticides were determined in water, pore water and sediments of the Jiulong River Estuary and Western Xiamen Sea, China. The results showed that the levels of the total PCBs ranged from non-detectable to 1500 ngl(-1) in water, from 209 to 3870 ngl(-1) in pore water, and from 2.78 to 14.8 ng g(-1) dry weight in sediments. Total organochlorine insecticide concentrations were from below the limit of detection to 2480 ngl(-1) in water, from 267 to 33400 ngl(-1) in pore water, and from 4.22 to 46.3 ng g(-1) dry weight in sediments. Concentrations of PCBs and insecticides in pore water were significantly higher than those in surface water, due to the high affinity of these hydrophobic compounds for sediment phase. The PCB congeners with the highest concentrations were CB153, CB180 and CB194, which together accounted for 68-87% of total PCBs in water, pore water and sediment. Among the hexachlorocyclohexane (HCH) compounds, beta-HCH was found to be a major isomer. Analysis of 1,1,1-trichloro-2,2-bis-chlorophenyl-ethane (DDT) and its metabolites showed that 1, 1-dichloro-2[o-chlorophenyl]-2[p-chlorophenyl]-ethylene (DDE) was dominant in the group. In comparison to a 1998 study in the Western Xiamen Sea, levels of organochlorines were enhanced due probably to recent inputs and changes in sediments. (c) 2004 Elsevier Ltd. All rights reserved.

Investigation on inhibition behavior of S-triazole-triazole derivatives in acidic solution

Four main methods, such as weight loss test, EIS, adsorption isotherm and quantum chemical calculation were employed to study the inhibition efficiency and mechanism of three derivatives on mild steel in acid solution, whose inhibition efficiency were proved to follow the order of DMTT > NMTT > PMTT, The adsorption model of DMTT was established at different temperature according to the fitted results. The quantum chemical results indicated that the adsorption sites of the derivatives were strongly centralized on benzene ring, triazole ring, etc. QSAR was set up to explain the relationship of molecular structure and the inhibition effect of the derivatives. (C) 2008 Elsevier Ltd. All rights reserved.

The hydrogen permeation investigation of API X56 steel in sea mud

It was found that the corrosion rate of steel in the sea mud with sulfate-reducing bacteria (SRB) could be as high as 10 times of that in the sea mud without SRB. And the hydrogen permeation reaction would occur when metals were corroded. So it is necessary to investigate the effect of living SRB on hydrogen permeation in the sea mud. Cathodic potential was often added to metals in order to protect them. But hydrogen permeation could be affected by the cathodic potential. So it is also necessary to study the effect of cathodic potential on hydrogen permeation. In this paper, the hydrogen permeation actions of APT X56 steel in the sea mud with and without SRB at corrosion and cathodic potential were studied with an improved Devanathan-Stachurski's electrolytic cell. Experimental results showed that during the growth of SRB, the current density curve of hydrogen permeation was accordant with the growth curve of SRB. But the hydrogen permeation current density of APT X56 steel hardly changed in the sterilized sea mud. Compared with the hydrogen permeation current density of APT X56 steel in the sterilized sea mud, the hydrogen permeation of APT X56 steel in the sea mud could be accelerated by living SRB. Experimental results also showed that the hydrogen permeation current density increased rapidly when the cathodic potential was added to the three-electrode system of the cathodic cell, and then the hydrogen permeation current density could obtain a stable value slowly. So the cathodic potential added to the cathodic cell could accelerate hydrogen permeation.

一种新型四自由度并联机器人运动学正问题的求解

对一种新型四自由度并联机器人运动学正问题进行了研究，利用３个变量构造 出求解正问题的３个约束方程，然后运用符号计算和析配消元法推导出了只含有一 个变元的３２次多项式方程，并且应用计算机软件系统Ｍａｔｈｅｍａｔｉｃａ进行了求正问 题实解的数值验证。

旋转轴对称介质中的qP波一阶射线追踪

Elastic anisotropy is a very common phenomenon in the Earth’s interior, especial for sedimentary rock as important gas and oil reservoirs. But in the processing and interpretation of seismic data, it is assumption that the media in the Earth’s interior is completely elastic and isotropic, and then the methods based on isotropy are used to deal with anisotropic seismic data, so it makes the seismic resolution lower and the error on images is caused. The research on seismic wave simulation technology can improve our understanding on the rules of seismic wave propagation in anisotropic media, and it can help us to resolve problems caused by anisotropy of media in the processing and interpretation of seismic data. So researching on weakly anisotropic media with rotated axis of symmetry, we study systematically the rules of seismic wave propagation in this kind of media, simulate the process with numerical calculation, and get the better research results. The first-order ray tracing (FORT) formulas of qP wave derived can adapt to every anisotropic media with arbitrary symmetry. The equations are considerably simpler than the exact ray tracing equations. The equations allow qP waves to be treated independently from qS waves, just as in isotropic media. They simplify considerably in media with higher symmetry anisotropy. In isotropic media, they reduce to the exact ray tracing equations. In contrast to other perturbation techniques used to trace rays in weakly anisotropic media, our approach does not require calculation of reference rays in a reference isotropic medium. The FORT-method rays are obtained directly. They are computationally more effective than standard ray tracing equations. Moreover the second-order travel time corrections formula derived can be used to reduce effectively the travel time error, and improve the accuracy of travel time calculation. The tensor transformation equations of weak-anisotropy parameters in media with rotated axis of symmetry derived from the Bond transformation equations resolve effectively the problems of coordinate transformation caused by the difference between global system of coordinate and local system of coordinate. The calculated weak-anisotropy parameters are completely suitable to the first-order ray tracing used in this paper, and their forms are simpler than those from the Bond transformation. In the numerical simulation on ray tracing, we use the travel time table calculation method that the locations of the grids in the ray beam are determined, then the travel times of the grids are obtained by the reversed distance interpolation. We get better calculation efficiency and accuracy by this method. Finally we verify the validity and adaptability of this method used in this paper with numerical simulations for the rotated TI model with anisotropy of about 8% and the rotated ORTHO model with anisotropy of about 20%. The results indicate that this method has better accuracy for both media with different types and different anisotropic strength. Keywords: weak-anisotropy, numerical simulation, ray tracing equation, travel time, inhomogeneity

井间地震技术研究和应用

Cross well seismic technique is a new type of geophysical method, which observes the seismic wave of the geologic body by placing both the source and receiver in the wells. By applying this method, it averted the absorption to high-frequency component of seismic signal caused by low weathering layers, thus, an extremely high-resolution seismic signal can be acquired. And extremely fine image of cross well formations, structure, and reservoir can be achieved as well. An integrated research is conducted to the high-frequency S-wave and P-wave data and some other data to determine the small faults, small structure and resolving the issues concerning the thin bed and reservoir's connectivity, fluid distribution, steam injection and fracture. This method connects the high-resolution surface seismic, logging and reservoir engineering. In this paper, based on the E & P situation in the oilfield and the theory of geophysical exploration, a research is conducted on cross well seismic technology in general and its important issues in cross well seismic technology in particular. A technological series of integrated field acquisition, data processing and interpretation and its integrated application research were developed and this new method can be applied to oilfield development and optimizing oilfield development scheme. The contents and results in this paper are as listed follows: An overview was given on the status quo and development of the cross well seismic method and problems concerning the cross well seismic technology and the difference in cross well seismic technology between China and international levels; And an analysis and comparison are given on foreign-made field data acquisition systems for cross-well seismic and pointed out the pros and cons of the field systems manufactured by these two foreign companies and this is highly valuable to import foreign-made cross well seismic field acquisition system for China. After analyses were conducted to the geometry design and field data for the cross well seismic method, a common wave field time-depth curve equation was derived and three types of pipe waves were discovered for the first time. Then, a research was conducted on the mechanism for its generation. Based on the wave field separation theory for cross well seismic method, we believe that different type of wave fields in different gather domain has different attributes characteristics, multiple methods (for instance, F-K filtering and median filtering) were applied in eliminating and suppressing the cross well disturbances and successfully separated the upgoing and downgoing waves and a satisfactory result has been achieved. In the area of wave field numerical simulation for cross well seismic method, a analysis was conducted on conventional ray tracing method and its shortcomings and proposed a minimum travel time ray tracing method based on Feraiat theory in this paper. This method is not only has high-speed calculation, but also with no rays enter into "dead end" or "blinded spot" after numerous iterations and it is become more adequate for complex velocity model. This is first time that the travel time interpolation has been brought into consideration, a dynamic ray tracing method with shortest possible path has been developed for the first arrivals of any complex mediums, such as transmission, diffraction and refraction, etc and eliminated the limitation for only traveling from one node to another node and increases the calculation accuracy for minimum travel time and ray tracing path and derives solution and corresponding edge conditions to the fourth-order differential sonic wave equation. The final step is to calculate cross well seismic synthetics for given source and receivers from multiple geological bodies. Thus, real cross-well seismic wave field can be recognized through scientific means and provides important foundation to guide the cross well seismic field geometry designing. A velocity tomographic inversion of the least square conjugated gradient method was developed for cross well seismic velocity tomopgraphic inversion and a modification has been made to object function of the old high frequency ray tracing method and put forward a thin bed oriented model for finite frequency velocity tomographic inversion method. As the theory model and results demonstrates that the method is simple and effective and is very important in seismic ray tomographic imaging for the complex geological body. Based on the characteristics of the cross well seismic algorithm, a processing flow for cross well seismic data processing has been built and optimized and applied to the production, a good section of velocity tomopgrphic inversion and cross well reflection imaging has been acquired. The cross well seismic data is acquired from the depth domain and how to interprets the depth domain data and retrieve the attributes is a brand new subject. After research was conducted on synthetics and trace integration from depth domain for the cross well seismic data interpretation, first of all, a research was conducted on logging constraint wave impedance of cross well seismic data and initially set up cross well seismic data interpretation flows. After it applied and interpreted to the cross well seismic data and a good geological results has been achieved in velocity tomographic inversion and reflection depth imaging and a lot of difficult problems for oilfield development has been resolved. This powerful, new method is good for oilfield development scheme optimization and increasing EOR. Based on conventional reservoir geological model building from logging data, a new method is also discussed on constraining the accuracy of reservoir geological model by applying the high resolution cross well seismic data and it has applied to Fan 124 project and a good results has been achieved which it presents a bight future for the cross well seismic technology.

中国特有针叶树种对气候变化的敏感性研究

About 214 trees in 9 sampling sites, representing 5 endemic conifer species, were collected from the western Sichuan Province and eastern Qinghai Province, China. In this study, structure we try to investigate tree-ring sensitivity to climate in order to obtain primary information of reconstructing past climate from the trees in this region. All the 5 species present distinct ring boundaries ^ few ABS(absent rings) and available for cross-dating,which are all past the test by program COFECHA. Statistics for all the 8 tree-ring width residual chronologies present significant inter-correlation between series and high values of mean sensitivity. As well as the maximum latewood density of Picea crassifolia Kom and Pinus densata Mast. These results indicate usefulness of these chronologies for dendrochronological studies. Pearson correlation analyses were applied to provide a basic estimate of the causal relationships between tree-ring width and climate factors. We found some significant relationships between tree-ring width> maximum density and temperature as well as precipitation. Especially, there is high correlation between the maximum density of the Picea crassifolia Kom and the index of moisture, the ratio of precipitation and temperature, which can indicate well the climate; however the higher correlation can be see between the maximum density of Pinus densata Mast and the total temperature from June to September. Regardless of tree species, chronologies in our study region presented accordant variations of which may reveal strong common climate signal. Thus these chronologies are shown to be dependable for building tree-ring network in the nearly future. However, there are limitations in this study, only monthly mean of temperature and precipitation were available. Also, for this typical subtropical mountain system, meteorological stations are usually located in valley and biased to represent moisture conditions on the slopes. Thus the estimation of precipitation both in temporal and spatial domain was rather restricted. Further study, such as wood anatomy, physiology and densitometry, are needed for better understanding the environmental and climatic history in this area.