Effects of physical parameter range on dimensionless variable sensitivity in water flooding reservoirs

The similarity criterion for water flooding reservoir flows is concerned with in the present paper. When finding out all the dimensionless variables governing this kind of flow, their physical meanings are subsequently elucidated. Then, a numerical approach of sensitivity analysis is adopted to quantify their corresponding dominance degree among the similarity parameters. In this way, we may finally identify major scaling law in different parameter range and demonstrate the respective effects of viscosity, permeability and injection rate.

渗流力学研究的现状和发展趋势

简述了水利、环境、能源工程和生物学中的渗流力学问题,扼要概括了渗流力学理论研究的现状,并指出渗流力学在多孔介质描述、裂缝型介质渗流、多相多组分渗流、物理化学渗流、非线性渗流、非饱和渗流、微观渗流、渗流模拟等理论及相关方法和测试技术等方面的发展趋势.

纵向非均匀多孔介质Marangoni对流不稳定性

理论研究了纵向非均匀多孔介质中流体表面张力驱动的对流不稳定性、充满液体的多孔介质层从下方加热，上方自由表面冷却，形成可引起多孔介质液层Marangoni—Benard对流流动的纵向温度梯度．采用线性化的Brinkman．Forchheimier方程作为控制方程组，对孔隙率分别为线性函数、正弦三角函数分布的非均匀多孔介质液层的Marangoni—Benard问题进行了线性稳定性分析、通过采用Chebyshev-Tau谱方法求解广义特征值问题，得到了系统临界Marangoni数随无量纲波数变化的中性稳定性曲线，分析和比较了孔隙率的变化对液层对流稳定性和流场结构的影响，获得了纵向非均匀多孔介质液层不稳定性现象的新特征．

Modeling of Ammonothermal Growth of Gallium Nitride Single Crystals

Ammonothermal growth of GaN crystals with a retrograde solubility has been modeled and simulated here using fluid dynamics, thermodynamics and heat transfer models. The nutrient is considered as a porous media bed and the flow in the porous charge is simulated using the Darcy-Brinkman-Forchheimer model. The resulting governing equations are solved using the finite volume method. For the case of retrograde solubility, the charge is put above the baffle. The temperature difference between the dissolving zone and growth zone is found smaller than that applied on the sidewall of autoclave. The baffle opening has a strong effect on the nutrient transport and supersaturation of GaN species in the growth zone.

Transport Phenomena in Ammonothermal Growth of Gallium Nitride

GaN can be used to fabricate blue/green/UV LEDs and high temperature, high power electronic devices. Ideal substrates are needed for high quality III-nitride epitaxy, which is an essential step for the manufacture of LEDs. GaN substrates are ideal to be lattice matched and isomorphic to nitride-based films. Bulk single crystals of GaN can be grown from supercritical fluids using the ammonothermal method, which utilizes ammonia as fluid rather than water as in the hydrothermal process. In this process, a mineralizer such as amide, imide or azide is used to attack a bulk nitride feedstock at temperatures from 200 - 500癈 and pressures from 1 - 4 kbar. Baffle design is essential for successful growth of GaN crystals. Baffle is used to separate the dissolving zone from the growth zone, and to maintain a temperature difference between the two zones. For solubility curve with a positive coefficient with respect to temperature, the growth zone is maintained at a lower temperature than that in the dissolving zone, thus the nutrient becomes supersaturated in the growth zone. The baffle opening is used to control the mixing of nutrients in the two zones, thus the transfer of nutrient from the lower part to the upper part. Ammonothermal systems have been modeled here using fluid dynamics, thermodynamics and heat transfer models. The nutrient is considered as a porous media bed and the flow is simulated using the Darcy-Brinkman-Forchheimer model. The resulting governing equations are solved using the finite volume method. We investigated the effects of baffle opening and position on the transport phenomena of nutrient from dissolving zone to the growth zone. Simulation data have been compared qualitatively with experimental data.

肝脏中生物流体流动的多重介质渗流模型和数值模拟

本文采用生物渗流理论，建立了肝脏内不同生物流体流动的多重介质渗流模型，采用有限元法求解这种特殊的渗流问题，根据数值计算结果揭示了肝内血液、组织液以及胆汁等的流动规律，并探讨了肝脏血流动力学的一些问题。论文将肝脏内部与生物代谢功能有关的肝血窦和窦周间隙当作两重并存的多孔介质，血液在肝血窦中，以及组织液在窦周间隙中的流动均当作渗流处理，通过Starling公式考虑了两重介质之间的流量交换，从而建立了肝血窦-窦周间隙的双重介质模型。针对肝脏胆汁分泌功能，将肝脏内密布的毛血肝管网当作多孔介质，以受静压及渗透压驱动的流体跨壁流动表示肝汁从肝细胞向毛细肝管的分泌，肝汁在毛细胆管网中的流动作为渗流处理，从而建立了肝汁分泌与输运的双重介质模型。采用有限元法求解了生物流体的双重介质渗流问题，针对非牛顿渗流和两重介质的相互作用，本文发展了一种嵌套迭代方法，即采用直接迭代求解血液在肝血窦中的非线性渗流，采用交替迭代解决双重介质渗流中由跨壁流支引起的相互流体交换，直接迭代嵌套于交替迭代中。这种算法比较有效的解决了包含非牛顿渗流的双重介质渗流问题。根据生物多孔介质中微细管系统的构筑方式以及不同微细管系统之间的联系方式，论文提出将生物多孔介质划分为分级多孔介质和多重多孔介质两种主要类型。基于多相混合物的平均化的理论，论文推导了双重多孔介质中的动量守恒方程、质量守恒方程以及相应的渗流方程，建立了双重多孔介质渗流的平均化模型。基于分级多孔介质渗流的理论，论文将脏器中的血管树按管径分为不同级别的多孔介质，各级血管中和血液流动均作为渗流处理，从而提出了计算脏器整体血流的一种渗流方法。采用这种方法，在论文提出的肝血窦 - 窦周间隙双重介质渗流流模型的基础之上，初步研究了肝脏门静脉系统的血液动力学规律。采用本文提出的肝血窦 - 窦周间隙双重介质模型和胆汁分泌 - 流动的双重介质模型，得到了血液、组织液和胆汁在肝小叶中的压力分布和速度分布，并分析了肝血窦壁的跨壁流动模式，胆汁流量的影响因素，以及窦周间隙中组织液流量与肝血窦中血液流动及肝血窦壁渗透系数等因素的关系，揭示了肝脏内血液、组织液及胆汁等生物流体流动的一般规律。

Work and energy equations and the principle of generalized effective stress for unsaturated soils

The effective stress principle has been efficiently applied to saturated soils in the soil mechanics and geotechnical engineering practice; however, its applicability to unsaturated soils is still under debate. The appropriate selection of stress state variables is essential for the construction of constitutive models for unsaturated soils. Owing to the complexity of unsaturated soils, it is difficult to determine the deformation and strength behaviors of unsaturated soils uniquely with the previous single-effective-stress variable theory and two-effective-stress-variable theory in all the situations. In this paper, based on the porous media theory, the specific expression of work is proposed, and the effective stress of unsaturated soils conjugated with the displacement of the soil skeleton is further derived. In the derived work and energy balance equations, the energy dissipation in unsaturated soils is taken into account. According to the derived work and energy balance equations, all of the three generalized stresses and the conjugated strains have effects on the deformation of unsaturated soils. For considering these effects, a principle of generalized effective stress to describe the behaviors of unsaturated soils is proposed. The proposed principle of generalized effective stress may reduce to the previous effective stress theory of single-stress variable or the two-stress variables under certain conditions. This principle provides a helpful reference for the development of constitutive models for unsaturated soils.

考虑介质微观非均质特征的乳状液渗流模型

油水乳化渗流是三元复合驱和热力采油过程中常见的现象,地层介质的微观孔隙结构特征对乳状液流动有着重要影响.现有描述乳状液渗流的理论模型都属于确定性方法,只能反映出介质孔隙结构的体积平均效果.当介质内部微观非均质性相比其尺寸不能被忽略时,采用确定性方法描述会与实验结果存在偏差.基于连续时间随机游走理论建立了描述乳状液渗流的随机理论模型.该模型引入反映液滴微观运动特征的跃迁时间和跃迁位移两个概率分布函数来反映多孔介质微观非均质特征.研究结果表明该模型能很好地刻画实验曲线中出现的与介质尺度相关的拖尾现象,可作为更一般的过滤模型.

The Experimental and Numerical Studies on Gas Production from Hydrate Reservoir by Depressurization

A set of experimental system to study hydrate dissociation in porous media is built and some experiments on hydrate dissociation by depressurization are carried out. A mathematical model is developed to simulate the hydrate dissociation by depressurization in hydrate-bearing porous media. The model can be used to analyze the effects of the flow of multiphase fluids, the kinetic process and endothermic process of hydrate dissociation, ice-water phase equilibrium, the variation of permeability, convection and conduction on the hydrate dissociation, and gas and water productions. The numerical results agree well with the experimental results, which validate our mathematical model. For a 3-D hydrate reservoir of Class 3, the evolutions of pressure, temperature, and saturations are elucidated and the effects of some main parameters on gas and water rates are analyzed. Numerical results show that gas can be produced effectively from hydrate reservoir in the first stage of depressurization. Then, methods such as thermal stimulation or inhibitor injection should be considered due to the energy deficiency of formation energy. The numerical results for 3-D hydrate reservoir of Class 1 show that the overlying gas hydrate zone can apparently enhance gas rate and prolong life span of gas reservoir.

水合物及其在多孔介质中导热性能的研究

气体水合物是一种笼形混合物，它是水分子形成的主体框架包裹其他客体分子形成的一种非化学计量的冰状物质。在海底和大陆的永冻区有大量的天然气水合物，由于天然气水合物富含天然气资源（约2x1016时），并且其稳定性关系到全球气候和海洋地质结构的变化，因而受到广泛的关注。所以在考虑对该资源进行热开采和考察地球温压变化对含水合物层的影响时，有必要掌握水合物的热物性和含水合物层的有效导热系数（ETC）。另一方面，水合物虽然具有明确的晶体结构，但研究表明n型水合物具有玻璃体的导热特性，即其具有低导热系数和导热系数随温度变

耗散粒子动力学处理复杂固体壁面的一种有效方法

耗散粒子动力学(dissipative particle dynamics,DPD)作为一种介观尺度拉格朗日型粒子方法,已经成功地应用于微纳米流动和生化科技的研究中. 复杂固体壁面的处理和壁面边界条件的实施一直是DPD方法发展及应用的一个障碍. 提出了处理复杂固体壁面的一种新的方法. 复杂固体区域通过冻结随机分布并且达到平衡状态的DPD粒子代表;所冻结的DPD粒子位于临近流动区域的一个截距内;在靠近固体壁面的流动区域中设置流动反弹层,当流动DPD粒子进入此流动层后反弹回流动区域. 应用这种固体壁面处理方法.

农业污染物在多孔介质中迁移的研究进展

为有效地预测和控制农业污染物对土壤及地下水资源的污染 ,需要建立相应的数学模型。在数学模型的应用中 ,模型参数的确定是关键。本文简要回顾了农业污染物在多孔介质迁移模型研究的进展 ,指出了各自的适用条件及存在的问题。

Mesoscopic simulation of the impregnating process of unidirectional fibrous preform in resin transfer molding

The resin transfer molding has gained popularity in the preparation of fiber-reinforced polymer-matrix composites because of its high efficiency and low pollution. The non-uniform inter-tow and intra-tow flows are regarded as the reason of void formation in RTM. According to the process characteristics, the axisymmetric model was developed to study the interaction between the flow in the inter-tow space and that in the intra-tow space. The flow behavior inside the fiber tows was formulated using Brinkman's equation, while that in the open space around the fiber tows was formulated by Stokes' equation. The volume of fluid (VOF) method was applied to track the flow front, and the effects of filling velocity, resin viscosity, inter-tow dimension and intra-tow permeability on fluid pressure and flow front were analyzed. The results show that the flow front difference between the inter-tow and intra-tow becomes larger with the decrease of intra-tow permeability, as well as the increase of filling velocity and inter-tow dimension.