Sodium sulfonate-functionalized poly(ether ether ketone)s

A new monomer, sodium 5,5'-carbonylbis(2-fluorobenzenesulfonate) (1), was synthesized by sulfonation of 4,4'-difluorobenzophenone (2) with fuming sulfuric acid. Poly(ether ether ketone)s containing sodium sulfonate groups were synthesized directly via aromatic nucleophilic substitution from the sodium sulfonate-functionalized monomer 1 and Bisphenol A (3) in the presence of potassium carbonate in dimethyl sulfoxide. The polycondensation proceeds without any side reactions. The differential scanning calorimetry measurement indicated that the polymers are amorphous and the glass transition temperatures increase with the content of sodium sulfonate groups in the polymer chain. The degree of substitution with sodium sulfonate groups has strong influence on their thermal stability and solubility.

Construction of AFLP-based genetic linkage map for Zhikong scallop, Chlamys farreri Jones et Preston and mapping of sex-linked markers

Zhikong scallop (Chlamys farreri) is an economically important aquaculture species in China; however, frequent mass mortality seriously affects the development of its industry. Genetic linkage map is useful for genetic improvement and selective breeding of C. farreri. Linkage maps were constructed using an intraspecific F-1 cross and amplified fragment length polymorphism (AFLP) markers. Thirty-two selected AFLP primer combinations produced 545 AFLP markers that were polymorphic in either of the parents and segregated in the progeny. Of these segregating markers, 166 were mapped to 19 linkage groups of the female framework map, covering a total of 1503.9 cM, with an average marker spacing of 10.2 cM; and 197 markers were assigned to 20 linkage groups of the male map, covering a total of 1630.7 cM, with 9.2 cM per marker. A sex-linked marker was mapped on the female map with zero recombination and a LOD of 27.3. The genetic length of C farreri genome was estimated as 1889.0 cM for the female and 1995.9 cM for the male. The coverage of the framework map was calculated as 79.6% for the female and 81.7% for the male. When the triplets and doublets were considered, the observed length of the map was calculated as 1610.2 cM with coverage of 85.2% for the female, and 1880.5 cM with coverage of 94.2% for the male. The genetic maps presented here will serve as a basis for the construction of a high-resolution genetic map and mapping of economically important genes. (C) 2004 Published by Elsevier B.V.

Comparison of photobioreactors for cultivation of Undaria pinnatifida gametophytes

Undaria pinnatifida gametophytes were grown in 2.5 l bubble column and airlift reactor at 25 degreesC and light intensity of 40 mumol m(-2) s(-1) for 6 days. With aeration at 1 l min(-1), the airlift reactor yielded higher growth rate (0.12 mg DW ml(-1) d(-1)) than a bubble column (0.08 mg DW ml(-1) d(-1)). The advantages were related to the more homogeneous fluid dynamic characteristics of the airlift reactor.

Molecular characterizations of oxytetracycline resistant bacteria and their resistance genes from mariculture waters of China

Oxytetracycline-resistant bacteria were isolated from a mariculture farm in China, and accounted for 32.23% and 5.63% of the total culturable microbes of the sea cucumber and the sea urchin rearing waters respectively. Marine vibrios, especially strains related to Vibrio splendidus or V. tasmaniensis, were the most abundant resistant isolates. For oxytetracycline resistance, tet(A), tet(B) and tet(D) genes were detected in both sea cucumber and sea urchin rearing ponds. The dominant resistance type for V. tasmaniensis-like strains was the combination of both tet(A) and tet(B) genes, while the major resistance type for V. splendidus-like strains was a single tet(D) gene. Most of the sea cucumber tet-positive isolates harbored a chloramphenicol-resistance gene, either cat IV or cat II, while only a few sea urchin tet-positive isolates harbored a cat gene, actually cat IV. The coexistence of tet and cat genes in the strains isolated from the mariculture farm studied was helpful in explaining some of the multi-resistance mechanisms. (c) 2006 Elsevier Ltd. All rights reserved.

黄海浮游动物功能群的研究

浮游动物在海洋生态系统物质循环和能量流动中起着至关重要的作用。浮游动物物种组成、生物量和次级生产力的变化会改变生态系统的结构和功能。在黄海生态系统中如何描述这个过程，并使它易于模拟是本论文的研究目的。生物量和生产力是海洋生态系统食物网的基础。谁是浮游动物生物量和次级生产力的基础？哪些种类在生态系统中起关键作用？这些问题在黄海这样的温带陆架边缘海区很难回答，原因是物种组成、生物量和生产力的季节变化显著。因此，在对黄海食物产出的关键过程进行模拟时，需要应用既准确又简便的方法来对浮游动物群落的生态过程进行模拟。在对黄海浮游动物群落结构和物理海洋学特征进行充分的分析之后，浮游动物功能群的方法被确定用来进行黄海生态系统结构和功能的模拟。 根据浮游动物的粒径、摄食习性和营养功能，黄海浮游动物被分为6个功能群：大型浮游甲壳动物功能群（Giant crustacean，GC）、大型桡足类功能群（Large copepods, LC）、小型桡足类功能群（Small copepods，SC）、毛颚类功能群（Chaetognaths）、水母类功能群（Medusae）和海樽类功能群（Salps）。GC、LC和SC是按照粒径大小而划分的功能群，他们是高营养层次的主要食物资源。毛颚类和水母类是两类胶质性的肉食性浮游动物功能群，他们与高营养层次竞争摄食饵料浮游动物；海樽类与其他浮游动物种类竞争摄食浮游植物，而本身的物质和能量却不能有效的传递到高营养层次。本文研究报道了浮游动物各功能群的时空分布、基于浮游动物动能群的黄海生态区划分、饵料浮游动物功能群的生产力、毛颚类对浮游动物的摄食压力以及中华哲水蚤（Calanus sinicus）的摄食生态学。 春季，浮游动物生物量为2.1 g m–2，GC、LC和SC对生物量的贡献率分别为19, 44 和 26%。高生物量的LC和SC功能群主要分布于山东半岛南岸的近岸海域，而GC主要分布在远岸站位。夏季，浮游动物的生物量为3.1 g m–2，GC贡献了73%。GC、LC和SC主要分布在黄海的中部海域。秋季，浮游动物生物量为1.8 g m–2，GC、LC和SC的贡献率相似，分别为36, 33和23%，高生物量的GC和LC分布在黄海中部，而SC主要分布在远岸站位。GC和LC是冬季浮游动物生物量（2.9 g m–2）的优势功能群，分别贡献率了57%和27%，高生物量的GC、LC和SC都分布在黄海的中部海域。与GC、LC和SC相比，毛颚类生物量较低，主要分布于黄海的中北部海域。水母类（本文中指小型水母类）和海樽类斑块分布明显，主要分布于黄海沿岸和北部海域。属于不同功能群的约10个种类为浮游动物的优势种，控制着浮游动物群落的动态。 春季，黄海可以被分成4个浮游动物生态区，浮游动物生物量的分布中心位于山东半岛南岸近岸海域，与第一个生态区相对应，LC和SC在分布中心起主要的控制作用；夏、秋和冬季，黄海分别被分成3、4和3个生态区，浮游动物生物量的分布中心均位于黄海的中部海域，均与各季节的第一个生态区相对应，GC和LC是分布中心生态区的优势功能群，对分布中心起主要的控制作用。黄海冷水团（YSCBW）在GC、LC和SC的空间分布模式中起着重要的作用。黄海不同季节浮游动物生态区的空间分布模式及生态区中起控制作用的优势功能群类别有着重要的生态学意义。 我们将饵料浮游动物功能群细化为0.16–0.25 mm、0.25–0.5 mm、0.5–1 mm、1–2 mm和 >2 mm5个粒径组。应用生物能量学的方法研究了不同粒径浮游动物的生产力。结果表明：浮游动物次级生产力5月份最高，为91.9 mg C m–2 d–1，其次是6月和9月，分别为75.6 mg C m–2 d–1和65.5 mg C m–2 d–1，8月、3月和12月较低，仅为42.3 mg C m–2 d–1、35.9 mg C m–2 d–1和27.9 mg C m–2 d–1。根据这些结果，黄海浮游动物年次级生产力为18.9 g C m–2 year–1。0.16–0.25 mm和 0.25–0.5 mm 两个粒径组对浮游动物次级生产力的贡献率为58–79%，即相对应的SC功能群的周转率（P/B, 0.091–0.193 d–1）要高于GC和LC。 黄海毛颚类功能群的优势种类为强壮箭虫（Sagitta crassa）、纳嘎箭虫（S. nagae）、肥胖箭虫（S. enflata）和百陶箭虫（S. bedoti）。我们对这四种箭虫的生产力和对浮游动物生物量和生产力的摄食压力进行了研究。结果表明：黄海毛颚类总的生物量为98–217 mg m–2，总的生产力为1.22–2.36 mg C m–2 d–1。黄海毛颚类的生物量占浮游动物总生物量的6.35–14.47%，而生产力仅占浮游动物总生产力的2.54–6.04%。强壮箭虫和纳嘎箭虫是黄海毛颚类功能群的绝对优势种，控制着黄海毛颚类群落的动态。黄海毛颚类总的摄食率为4.24–8.18 mg C m–2d–1，对浮游动物现存量和生产力总的摄食压力分别为为0.94%和12.56%。黄海冬季，浮游动物的现存量和生产力为0.4 g C m–2和0.026 g C m–2d–1，而毛颚类的摄食压力却达到了全年的最大值，为1.4%和20.94%。因此，毛颚类的摄食可能对冬季浮游动物群落结构造成重要的影响。通过不同体长组箭虫的摄食率可以推断，黄海毛颚类全年主要摄食小型桡足类，对SC功能群的摄食压力最大。但是在夏季黄海冷水团形成的月份，毛颚类对前体长为2 mm的LC功能群中的种类摄食压力也较大，但此时，由于优势种中华哲水蚤进入滞育阶段，因此毛颚类的摄食会对其种群数量造成严重的影响。 中华哲水蚤在春、秋季的摄食率分别为2.08–11.46和0.26–3.70 µg C female–1 day–1，与微型浮游生物的现存量呈显著的正相关。春季，在黄海的北部，中华哲水蚤通过摄食微型浮游生物吸收的碳量能够满足其代谢和繁殖需求，而在黄海的南部和秋季黄海冷水团锋区附近，中华哲水蚤必须通过摄食其他类型的食物资源来维持其代谢和生殖需求。较低的摄食率、无产卵以及种群中CV期桡足幼体占优势表明，秋季中华哲水蚤在黄海冷水团区域内处于滞育状态。中华哲水蚤优先摄食微型原生动物，并且春季中华哲水蚤总的生长效率（GGE, 3–39%）与食物中微型原生动物的比例呈显著的正相关，表明微型原生动物具有较高的营养价值。但是，因较低的产卵率（0.16–12.6 eggs female–1 day–1）而导致的中华哲水蚤较低的总生长效率（13.4%），可能就是由于其食物中的必需营养成分含量不足（或缺乏）造成的。 本文从生物量的角度，对黄海浮游动物各功能群的时空分布、生态区划分进行了研究报道，对GC、LC和SC功能群的生产力、毛颚类对浮游动物的摄食压力和中华哲水蚤的摄食生态学进行了较为深入的研究，这些结果为黄海食物产出的关键过程的模拟提供了基础资料。今后的研究重点应搞清楚黄海水母类对浮游动物次级生产力的摄食压力和海樽类在食物产出模型中产生的负效应的程度，浮游动物各功能群的组成、季节变化和空间分布模式的长期变化，尤其是在气候变化和人类活动的影响下，将是今后研究的重点。

In vitro iron enrichment experiments in the Prydz Bay, the Southern Ocean: A test of the iron hypothesis

In "high nitrate, low chlorophyll" (HNLC) ocean regions, iron has been typically regarded as the limiting factor for phytoplankton production. This "iron hypothesis" needs to be tested in various oceanic environments to understand the role of iron in marine biological and biogeochemical processes. In this paper, three in vitro iron enrichment experiments were performed in Prydz Bay and at the Polar Front north of the Ross Sea, to study the role of iron on phytoplankton production. At the Polar Front of Ross Sea, iron addition significantly (P < 0.05, Student's t-test) stimulated phytoplankton growth. In Prydz Bay, however, both the iron treatments and the controls showed rapid phytoplankton growth, and no significant effect (P > 0.05, Student's t-test) as a consequence of iron addition was observed. These results confirmed the limiting role of iron in the Ross Sea and indicated that iron was not the primary factor limiting phytoplankton growth in Prydz Bay. Because the light environment for phytoplankton was enhanced in experimental bottles, light was assumed to be responsible for the rapid growth of phytoplankton in all treatments and to be the limiting factor controlling field phytoplankton growth in Prydz Bay. During the incubation experiments, nutrient consumption ratios also changed with the physiological status and the growth phases of phytoplankton cells. When phytoplankton growth was stimulated by iron addition, N was the first and Si was the last nutrient which absorption enhanced. The Si/N and Si/P consumption ratios of phytoplankton in the stationary and decay phases were significantly higher than those of rapidly growing phytoplankton. These findings were helpful for studies of the marine ecosystem and biogeochemistry in Prydz Bay, and were also valuable for biogeochemical studies of carbon and nutrients in various marine environments.

Two new xanthone glycosides from Swertia tetraptera

Two new xanthone glycosides, tetraswerosides A and B, were isolated from the whole plant of Swertia tertraptera. Their structures were determined as 3-O-beta -D-glucopyranosyl-1-hydroxy-4,7-dimethoxyxanthone and 3-O-[beta -D-xylopyranosyl-(1-->6)-beta -D-glucopyranosyl]-1- hydroxy-4,7-dimethoxyxanthone by spectroscopic methods.

海底金属矿床充水条件及矿坑突水的断层效应研究

The Xinli mine area of Sanshandao mine is adjacent to the Bohai Sea and its main exploitable ore deposit occurs in the undersea rock mass. The mine is the biggest undersea gold mine of China after production. The mine area faces a latent danger of water bursting, even sudden seawater inrush. There is no mature experience in undersea mining in China so far. The vein ore deposit is located in the lower wall of a fault; its possible groundwater sources mainly include bittern, Quaternary pore water and modern seawater. To ensure the safety of undersea mining, to survey the flooding conditions of the ore deposit using proper measures and study the potential seawater inrush pattern are the key technical problems. With the Xinli mine area as a case study, the engineering geological conditions of the Xinli mine area are surveyed in situ, the regional structural pattern and rock mass framework characteristics are found out, the distribution of the structural planes are modeled by a Monte Carlo method and the connectivity coefficients of rock mass structural planes are calculated. The regional hydro-geological conditions are analyzed and the in-situ hydro-geological investigation and sampling are performed in detail, the hydrochemistry and isotopes testing and groundwater dynamic monitoring are conducted, the recharge, runoff, discharge conditions are specified and the sources of flooding are distinguished. Some indices are selected from the testing results to calculate the proportion of each source in some water discharge points and in the whole water discharge of the Xinli mine area. The temporal and spatial variations of each water source of the whole ore deposit flooding are analyzed. According to the special project conditions in the Xinli mine area, the permeability coefficient tensors of the rock mass in Xinli mine area are calculated based on a fracture geometry measurement method, in terms of the connectivity and a few hydraulic testing results, a modified synthetic permeability coefficient are calculated. The hydro-geological conceptual and mathematical model are established，the water yield of mine is predicted using Visual Modflow code. The spreading law of surrounding rock mass deformation and secondary stress are studied by numerical analysis; the intrinsic mechanism of the faults slip caused by the excavation of ore deposit is analyzed. The results show that the development of surrounding rock mass deformation and secondary stress of vein ore deposit in the lower wall of a fault, is different from that in a thick-big ore deposit. The secondary stress caused by the excavation of vein ore deposit in the lower wall of a fault, is mainly distributed in the upper wall of the fault, one surface subsidence center will occur. The influences of fault on the rock mass movement, secondary stress and hydro-geological structures are analyzed; the secondary stress is blocked by the fault and the tensile stress concentration occurs in the rock mass near the fault, the original water blocking structure is destructed and the permeable structure is reconstructed, the primary structural planes begin to expand and newborn fissures occur, so the permeability of the original permeable structure is greatly enhanced, so the water bursting will probably occur. Based on this knowledge, the possible water inrush pattern and position of the Xinli mine area are predicted. Some computer programs are developed using object-oriented design method under the development platform Visual Studio.Net. These programs include a Monte Carlo simulation procedure, a joint diagrammatizing procedure, a structural planes connectivity coefficient calculating procedure, a permeability tensor calculating procedure, a water chemical formula edit and water source fixture conditions calculating procedure. A new computer mapping algorithm of joint iso-density diagram is raised. Based on the powerful spatial data management and icon functions of Geographic Information System, the pit water discharge dynamic monitoring data management information systems are established with ArcView.

中国南方红土古环境重建中存在的几个问题

随着黄土-古土壤系列在中国北方第四纪古环境演变的成功恢复,对中国南方红土所记录的古环境和全球变化信息的研究也逐渐成为热点。然而,纵观最近10多年来对中国南方红土古环境变化的研究现状,还存在不少问题,一些结论尚难以令人满意,从成因机理上未能给予有力的理论支持。对在风化壳形成机理的认识、风化壳剖面记载环境变化的历史、红土-沉积旋回所反映的古气候变迁、红土和黄土的古环境记录的对比等方面的研究中暴露出的一些问题,本文进行了剖析和讨论。