Micro Insert: A Prototype Full-Ring PET Device for Improving the Image Resolution of a Small-Animal PET Scanner

A full-ring PET insert device should be able to enhance the image resolution of existing small-animal PET scanners. Methods: The device consists of 18 high-resolution PET detectors in a cylindric enclosure. Each detector contains a cerium-doped lutetium oxyorthosilicate array (12 x 12 crystals, 0.72 x 1.51 x 3.75 mm each) coupled to a position-sensitive photomultiplier tube via an optical fiber bundle made of 8 x 16 square multiclad fibers. Signals from the insert detectors are connected to the scanner through the electronics of the disabled first ring of detectors, which permits coincidence detection between the 2 systems. Energy resolution of a detector was measured using a Ge-68 point source, and a calibrated 68Ge point source stepped across the axial field of view (FOV) provided the sensitivity profile of the system. A Na-22 point source imaged at different offsets from the center characterized the in-plane resolution of the insert system. Imaging was then performed with a Derenzo phantom filled with 19.5 MBq of F-18-fluoride and imaged for 2 h; a 24.3-g mouse injected with 129.5 MBq of F-18-fluoride and imaged in 5 bed positions at 3.5 h after injection; and a 22.8-g mouse injected with 14.3 MBq of F-18-FDG and imaged for 2 h with electrocardiogram gating. Results: The energy resolution of a typical detector module at 511 keV is 19.0% +/- 3.1 %. The peak sensitivity of the system is approximately 2.67%. The image resolution of the system ranges from 1.0- to 1.8-mm full width at half maximum near the center of the FOV, depending on the type of coincidence events used for image reconstruction. Derenzo phantom and mouse bone images showed significant improvement in transaxial image resolution using the insert device. Mouse heart images demonstrated the gated imaging capability of the device. Conclusion: We have built a prototype full-ring insert device for a small-animal PET scanner to provide higher-resolution PET images within a reduced imaging FOV. Development of additional correction techniques are needed to achieve quantitative imaging with such an insert.

长白山北坡土壤动物群落物种共有度的海拔梯度变化

群落间各生活型土壤动物科及所有土壤动物科的共有度,一定程度上反映了群落间的相关性及沿环境梯度的物种替代关系.应用梯度格局法在长白山北坡海拔550～2 650 m地段,每隔100 m海拔高度设置一块样地,共计22块样地,并应用Jaccard指数,对各海拔不同土壤动物群落问物种共有度的海拔梯度变化进行了分析.结果表明,不同海拔土壤动物群落间物种的共有度,无论以哪一生活层的土壤动物科来表达,基本都以与其最相邻的群落间为最高.群落间物种共有度峰值与谷点反映了群落类型随海拔具有间断性变化.线虫、甲螨、弹尾等各生活型土壤动物的共有度以及所有土壤动物科的共有度,均随着海拔差的增加呈下降趋势,但并非与植被情况完全吻合.

Self-assembled monolayer growth of phospholipids on hydrophobic surface toward mimetic biomembranes: Scanning probe microscopy study

Atomic force microscopy (AFM) and lateral force microscopy (LFM) were used simultaneously to analyze a model membrane bilayer structure consisting of a phospholipid outer monolayer deposited onto organosilane-derivatized mica surfaces, which were constructed by using painting and self-assembly methods. The phospholipid used as outer monolayer was dimyristoylphosphatidylcholine (DMPC). The hydrocarbon-covered substrate that formed the inner half bilayer was composed of a self-assembly monolayer (SAM) of octadecyltrichloroorganosilane (OTS) on mica. SAMs of DMPC were formed by exposing hydrophobic mica to a solution of DMPC in decane/isobutanol and subsequently immersing into pure water. AFM images of samples immersed in solution for varying exposure times showed that before forming a complete monolayer the molecules aggregated into dense islands (2.2-2.6 nm high) on the surface. The islands had a compact and rounded morphology. LFM, coupled with topographic data obtained with the atomic force mode, had made possible the distinction between DMPC and OTS. The rate constant of DMPC growth was calculated. This is the first systematic study of the SAM formation of DMPC by AFM and LFM imaging. It reveals more direct information about the film morphology than previous studies with conventional surface analytical techniques such as infrared spectroscopy, X-ray, or fluorescence microscopy.

Atom space distance and computing of molecular similarity

A mathematical model on computation of molecular similarity was suggested, The algorithmic techniques for measuring the degree of similarity between pairs of three-dimensional chemical molecules was represented by modified interatomic distance matrices. Current work was carried out on Indigo 2 work station with Sybyl software. Four groups of molecules were used to compute the molecules similarity to testing the mathematical model with satisfactory results.

空间距离在三维分子相似度计算中的应用

采用Tripos公司的MOPAC模块计算分子的空间距离， 所得距离矩阵用带有约束条件的空间距离方法计算分子的相似度， 同时通过4组化合物的计算， 与纯空间距离方法进行比较， 得到了较为满意的结果.

四甲基乙撑桥联二环戊二烯基环戊二烯基稀土配合物的合成与表征

合成了四个甲基乙撑桥联二环戊二烯基环戊二烯基稀土四氢呋喃配合物,采用元素分析、红外光谱、核磁共板、热失重和质谱等方法对所得到配合物进行表征,并用X光衍射法测得Me_4C_2(C_5H_4)_2SmC_5H_3(THF)的晶体结构。该晶体属正交晶系C_(e2a)空间群,a=1.1696(6),b=1.2539(5),c=2.9432(15)nm;V=4.316(4)nm~3,z=8,D_c=1.54g·cm~(-3)。三个环戊二烯基Sm-C(η~5)距离分别为0.272(3),0.276(3),0.278(3)nm和Sm-O键长为0.253(1)nm。

聚乙烯膜辐照接枝丙烯酸的XPS表征

用辐照方法,使亲水单体在聚烯烃类高分子材料表面接枝聚合,从而改善这些材料的亲水性,同时也可用这种方法来制备具有所需性能的膜材料(作离子交换膜、反渗透膜等),是一个较热门的研究课题。

Three tetraspanins from Chinese shrimp, Fenneropenaeus chinensis, may play important roles in WSSV infection

Three members of the tetraspanin/TM4SF superfamily were cloned from Chinese shrimp, Fenneropenaeus chinensis. The deduced amino acid sequences of the three proteins have typical motifs of the tetraspanin/TM4SF superfamily. Phylogenetic analysis of the proteins, together with the known tetraspanins of invertebrates and vertebrates, revealed that they belong to different tetraspanin subfamilies: CD9, CD63 and tetraspanin-3. The three cloned genes of CD9, CD63 and tetraspanin-3 showed apparently different tissue distributions. The CD9 gene (FcCD9) was specifically expressed in the hepatopancreas. While for the CD63 gene (FcCD63), the highest expression was detected in nerves, epidermis and heart, with low expression in haemocytes, ovary, gill, hepatopancreas and stomach and no expression in intestine, muscle and lymphoid organ. Compared with FcCD9 and FcCD63, the tetraspanin-3 gene (FcTetraspanin-3) was more broadly expressed and its highest expression was detected in the intestine. Its expression in nerves was lower than in the intestine, but was higher than in other tissues. Expression in haemocytes, ovary and muscle was much lower than in other tissues. The expression profiles of FcCD9, FcCD63 and FcTetraspanin-3 in different tissues, including haemocytes, lymphoid organ and hepatopancreas, were compared by real-time PCR when shrimp were challenged by live white spot syndrome virus (WSSV) and heat-inactivated WSSV. All three tetraspanins were markedly up-regulated in the live WSSV-challenged shrimp tissues. The data suggested that the three cloned members of TM4SF superfamily in Chinese shrimp may play a key role in the route of WSSV infection.

根据叶表皮特征试论国产三齿稃亚族的属间关系

根据植物叶片表皮结构,尤其下表皮特征,对国产三齿稃亚族6个属(包括1个引进属)进行了属间关系的分析.结果表明:国产三齿稃亚族中固沙草属最原始,草沙蚕属最高级,双稃草属、千金子属、三齿稃属和隐子草属演化居于其间;隐子草属可能直接起源于固沙草属,并在自身基础上派生了较为高级的三齿稃属;双稃草属与千金子属渊源关系直接,前者可能通过后者间接起生于固沙草属;草沙蚕属具有别于它属的性状级次,可能是起源于固沙草属、独树1支的顶级类群.这一结果不仅修正了前人演化理论的差误,而且为今后探讨该亚族的地理起源、散布路线提供了资料

Separation and determination of the major active components in Tibetan folk medicinal species Swertia franchetiana by HPLC with DAD

A sensitive and specific reversed-phase high performance liquid chromatography (RP-HPLC) method with diode array detection (DAD) was established for the quantitative determination of the nine active components, namely, swertiamarin (SWM, 1), mangiferin (MA, 2), gentipicroside (GE, 3), sweroside (SWO, 4), isoorientin (IS, 5), swertisin (SWS, 6), swertianolin (SWN, 7), 7-O-[alpha-L-rhamnopyranosyl-1 -> 2)-beta-D-xylopyranosyl]-1,8-dihydroxy-3-methoxyxanthone (RX, 8), and bellidifolin (BE, 9) used as the external standard, in Tibetan folk medicinal species Swertia franchetiana. Based on the baseline chromatographic separation of most components from the methanolic extract of Swertia franchetiana on a reversed-phase Eclipse XDB-C8 column with water-acetonitrile-formic acid as mobile phase, the nine components were identified by comparison with standard samples and qualified by using the external standard method with DAD at 254 nm. The correlation coefficients of all the calibration curves were found to be higher than 0.9980. The relative standard deviations (RSDs) of the peak areas and retention times for the nine standards were less than 2.07% and 2.86%, respectively.

冰期间冰期转换过程中陆地碳库的演化规律研究

Terrestrial carbon pool mainly consists of three parts: the active carbon pool of the vegetation，soil carbon pools and the lithosphere carbon pool of less activity. Under natural conditions，vegetation carbon pools，soil carbon exchange with atmospheric carbon pool directly，the lithosphere participate in the global carbon cycle by weathering Our research have coverd the soil organic carbon density，plant biomass (carbon density)，plant net primary productivity of past 40 ka，and the magnetic susceptibility，grain size，weathering of silicate carbon consumption of past 140 ka. This study has achieved a number of conclusions as shown below. 1 Silicate weathering CO2 consumption in the long-term fluctuations with a similar deep-sea δ18O record，demonstate that it not only can be used as one of the instructions of terrestrial carbon pool，even can be used as indicators of global environmental change; silicate weathering CO2 consumption and susceptibility shown a clear relationship between lag or lead at different times，it maybe lies on how the climate change. 2 Soil carbon pools in line with the global climate on long-term，but the relationship between soil carbon density and climate change was not obvious in short-term change，generally lags behind the changes in other climatic proxies. 3 Carbon density of vegetation and other proxy indicators of climate have good consistency. In the study period，perform the cycle of glacial and interglacial completely，but because of the ancient vegetation of accurate information is difficult to obtain，it did not reflect rapid response to climate change. 4 Cooling events is conducive to soil organic carbon accumulation but not conducive to weathering and vegetation growth. High temperature environment is not conducive to the accumulation of soil organic carbon. 5 In the deglacial time from the last glacial maximum to the Holocene，weathering carbon consumption seems earlier than vegetation and soil organic carbon in the fluctuant increase.Does it imply that the effects of silicate weathering is an important factor to the global carbon cycle and global climate change? It is worth further research.

粘弹性介质中的地震波传播与波形反演研究

The real earth is far away from an ideal elastic ball. The movement of structures or fluid and scattering of thin-layer would inevitably affect seismic wave propagation, which is demonstrated mainly as energy nongeometrical attenuation. Today, most of theoretical researches and applications take the assumption that all media studied are fully elastic. Ignoring the viscoelastic property would, in some circumstances, lead to amplitude and phase distortion, which will indirectly affect extraction of traveltime and waveform we use in imaging and inversion. In order to investigate the response of seismic wave propagation and improve the imaging and inversion quality in complex media, we need not only consider into attenuation of the real media but also implement it by means of efficient numerical methods and imaging techniques. As for numerical modeling, most widely used methods, such as finite difference, finite element and pseudospectral algorithms, have difficulty in dealing with problem of simultaneously improving accuracy and efficiency in computation. To partially overcome this difficulty, this paper devises a matrix differentiator method and an optimal convolutional differentiator method based on staggered-grid Fourier pseudospectral differentiation, and a staggered-grid optimal Shannon singular kernel convolutional differentiator by function distribution theory, which then are used to study seismic wave propagation in viscoelastic media. Results through comparisons and accuracy analysis demonstrate that optimal convolutional differentiator methods can solve well the incompatibility between accuracy and efficiency, and are almost twice more accurate than the same-length finite difference. They can efficiently reduce dispersion and provide high-precision waveform data. On the basis of frequency-domain wavefield modeling, we discuss how to directly solve linear equations and point out that when compared to the time-domain methods, frequency-domain methods would be more convenient to handle the multi-source problem and be much easier to incorporate medium attenuation. We also prove the equivalence of the time- and frequency-domain methods by using numerical tests when assumptions with non-relaxation modulus and quality factor are made, and analyze the reason that causes waveform difference. In frequency-domain waveform inversion, experiments have been conducted with transmission, crosshole and reflection data. By using the relation between media scales and characteristic frequencies, we analyze the capacity of the frequency-domain sequential inversion method in anti-noising and dealing with non-uniqueness of nonlinear optimization. In crosshole experiments, we find the main sources of inversion error and figure out how incorrect quality factor would affect inverted results. When dealing with surface reflection data, several frequencies have been chosen with optimal frequency selection strategy, with which we use to carry out sequential and simultaneous inversions to verify how important low frequency data are to the inverted results and the functionality of simultaneous inversion in anti-noising. Finally, I come with some conclusions about the whole work I have done in this dissertation and discuss detailly the existing and would-be problems in it. I also point out the possible directions and theories we should go and deepen, which, to some extent, would provide a helpful reference to researchers who are interested in seismic wave propagation and imaging in complex media.