Highly efficient and stable organic light-emitting diodes employing MoO3-doped perylene-3, 4, 9, 10-tetracarboxylic dianhydride as hole injection layer

We report highly efficient and stable organic light-emitting diodes (OLEDs) with MoO3-doped perylene-3, 4, 9, 10-tetracarboxylic dianhydride (PTCDA) as hole injection layer (HIL). A green OLED with structure of ITO/20 wt% MoO3: PTCDA/NPB/Alq(3)/LiF/Al shows a long lifetime of 1012 h at the initial luminance of 2000 cd/m(2), which is 1.3 times more stable than that of the device with MoO3 as HIL. The current efficiency of 4.7 cd/A and power efficiency of 3.7 lm/W at about 100 cd/m(2) have been obtained. The charge transfer complex between PTCDA and MoO3 plays a decisive role in improving the performance of OLEDs.

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮萃取~(46)Sc的研究

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)做萃取剂,氯仿和环己烷为稀释剂,观察了在HCl溶液46Sc的溶剂萃取行为。实验结果表明,从10-3~10-2mol/L的HCl溶液中用PMBP-氯仿(或环己烷)能有效地萃取46Sc,萃取率可达95%以上。另外,对PMBP从HCl溶液中萃取46Sc和234Th的结果也做了比较,结果表明,通过控制水溶液中HCl的浓度,能实现234Th与46Sc的分离。

1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮和磷酸三丁脂协同萃取镭的研究

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)为萃取剂,苯为稀释剂,从pH5的水相中萃取船224Ra,发现224Ra的萃取效率非常低。若往PMBP中加入少量的磷酸三丁脂(TBP),则会极大地提高镭的萃取效率,这说明TBP对PMBP萃取镭有显著的协同萃取效应。完成了萃取时间和反萃时间对224Ra萃取效率的影响以及224Ra萃取效率与TBP量之间的依赖关系等条件实验。

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮从硝酸介质中萃取钪

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)做萃取剂研究了从HNO_3介质中痕量钪的溶剂萃取行为。发现在很低的酸度下,PMBP几乎可以定量地萃取痕量的钪。同时,也讨论了用PMBP从~(18)O离子辐照过的铀靶溶液中萃取分离钍时钪的沾污。

1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)萃取钍流程的改进

在用PMBP(1 苯基 3 甲基 4 苯甲酰基 5 吡唑啉酮 )从 14MeV中子照射过的天然U靶溶液中萃取Th流程的基础上 ,将萃取介质改为HNO3溶液 ,并将单次萃取 反萃改为两次萃取 反萃 ;在反萃溶液中加入I- 载体和NaNO2溶液 ,在Fe(OH) 3沉淀溶液中加入Br- 载体。用改进后的流程从 6 0MeV/u18O离子轰击天然U的HNO3溶液中分离Th ,从制得的Th样品的γ射线谱可以看出 ,该流程能去除绝大部分产物元素 ,特别是能完全去除溴和碘

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮从硝酸中萃取痕量钍

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)为萃取剂,~(234)Th作示踪剂,完成了在硝酸介质中痕量钍溶剂萃取行为的研究。在~(234)Th萃取效率与酸度、萃取剂浓度、平衡时间等依赖关系的条件实验的基础上,获得了萃取钍的最佳条件。使用改进的PMBP萃取钍的流程,从~(18)O离子辐照过的铀靶中分离钍,钍样品的γ射线单谱显示绝大部分反应产物和大量铀的去除是满意的。

钯/铁双金属对土壤中2,2′,3,4,4′,5,5′-七氯联苯的催化脱氯研究

采用Fe0还原、钯催化法对土壤中2,2′,3,4,4′,5,5′-七氯联苯的的还原特性进行了实验研究.结果表明,Pd/Fe双金属能有效地进行2,2′,3,4,4′,5,5′-七氯联苯的催化脱氯.在钯化率为0.05%、钯/铁加入量1 g、初始pH为5.6、反应时间5 d的条件下,钯/铁双金属对土壤中2,2′,3,4,4′,5,5′-七氯联苯去除率达54%.实验还考察了钯化率、初始pH、反应时间、钯/铁投加量、2,2′,3,4,4′,5,5′-七氯联苯初始浓度等参数对2,2′,3,4,4′,5,5′-七氯联苯脱氯效果的影响.研究表明,较高的钯化率、钯/铁加入量,较低的2,2′,3,4,4′,5,5′-七氯联苯初始浓度及弱酸性等条件更有利于Pd/Fe对2,2′,3,4,4′,5,5′-七氯联苯的还原脱氯.在Pd/Fe双金属表面,2,2′,3,4,4′,5,5′-七氯联苯的脱氯符合一级动力学反应,反应速率常数为0.014 2/h,其半衰期为49 h.利用实验数据,对钯/铁双金属作用下的2,2′,3,4,4′,5,5′-七氯联苯还原脱氯的反应机制也进行了分析.

The synthesis and characterization of novel liquid crystalline, meso-tetra[4-(3,4,5-trialkoxybenzoate)phenyl]porphyrins

Five, novel, meso-tetra[4-(3,4,5-trialkoxybenzoate)phenyl]porphyrins and their metal complexes were synthesized and their molecular structures were confirmed by H-1 NMR, FTIR spectroscopy and elemental analysis. Mesomorphic studies using DSC, polarizing optical microscope and X-ray diffraction revealed that all compounds exhibited thermotropic columnar mesophases over a wide mesophase temperature range and low liquid crystalline-crystal line transition temperature. (c) 2007 Elsevier Ltd. All rights reserved

Effect of the nucleating agent 1,3 : 2,4-di(3,4-dimethylbenzylidene) sorbitol on the gamma phase content of propylene/ethylene copolymer

The influence of the concentration of a nucleating agent (NA), namely 1,3:2,4-di(3,4-dimethylbenzylidene) sorbitol (DMDBS), on the gamma phase content in a propylene/ethylene copolymer was investigated by means of Differential Scanning Calorimetry (DSC), Wide-Angle X-ray Diffraction (WAXD), Small- Angle X-ray Scatter (SAXS) and Polarized Optical Microscopy (POM).

Highly 3,4-selective living polymerization of isoprene with rare earth metal fluorenyl N-heterocyclic carbene precursors

Fluorenyl modified N-heterocyclic carbene ligated rare earth metal bis(alkyl) complexes, (Flu-NHC)Ln(CH2SiMe3)2 (Flu-NHC = (C13H8CH2CH2(NCHCCHN)C6H2Me3-2,4,6); Ln = Sc (1a); Ln = Y (1b); Ln = Ho (1c); Ln = Lit (1d)), were synthesized and fully characterized by NMR and X-ray diffraction analyses. Complexes Ib-d with the activation of (AlBu3)-Bu-i and [Ph3C][B(C6F5)4] exhibited high activity, medium syndio-but remarkably high 3,4-regio-selectivity, and the unprecedented livingness for the polymerization of isoprene. Such distinguished catalytic performances could be maintained under various monomer-to-initiator ratios (500-5000) and broad polymerization temperatures (25-80 degrees C).

New rare earth metal bis(alkyl)s bearing an iminophosphonamido ligand. Synthesis and catalysis toward highly 3,4-selective polymerization of isoprene

Newrareearth metal bis(alkyl) complexes [(NPNPh)Ln(CH2SiMe3)(2)(THF) (NPNPh:N(Ph)PPh2=NC6H2Me3-2,4,6; Ln = Sc (3a), Ln = Y (3b), Ln = Lu (3c)) and [(NPNPy)Sc(CH2SiMe3)(2)(THF)1 (NPNPY = N(Py)PPh2=NC6H2Me3-2,4,6) (3d)) have been prepared via protonolysis reaction between rare earth metal tris(alkyl)s and the corresponding iminophosphonamines. Complexes 3a-d are analogous monomers of THF solvate. Each metal ion coordinates to a eta(2)-chelated NPN ligand and two cis-located alkyl groups, adopting tetrahedron geometry.