Formation of a supported hybrid bilayer membrane on gold: A sterically enhanced hydrophobic effect

Adsorption of a monolayer of didecanoyl-L-alpha-phosphatidylcholine (DDPC) from dispersions of small unilamellar vesicles onto hydrophobic surfaces was investigated by mean of cyclic voltammetry and impedance spectroscopy. The hydrophobic surfaces were self-assembled monolayers of 2-mereapto-3-n-octylthiophene (MOT) on gold. One characteristic of the MOT monolayer is its permeability to organic molecules in aqueous solution, thus providing a more energetically favorable hydrophobic surface for the addition of phospholipid vesicles. The kinetics of the lipid monolayer formation were followed by measuring the time-dependent interfacial capacitance. Unusual values of thickness and capacitance of the MOT/ DDPC bilayers were observed. An interdigitating conformation of the bilayer structure was proposed to interpret the experimental results, The horseradish peroxidase reconstituted into the bilayer demonstrated the expected protein activity, showing practical use in research and in biosensor application.

Self-assembled monolayer growth of phospholipids on hydrophobic surface toward mimetic biomembranes: Scanning probe microscopy study

Atomic force microscopy (AFM) and lateral force microscopy (LFM) were used simultaneously to analyze a model membrane bilayer structure consisting of a phospholipid outer monolayer deposited onto organosilane-derivatized mica surfaces, which were constructed by using painting and self-assembly methods. The phospholipid used as outer monolayer was dimyristoylphosphatidylcholine (DMPC). The hydrocarbon-covered substrate that formed the inner half bilayer was composed of a self-assembly monolayer (SAM) of octadecyltrichloroorganosilane (OTS) on mica. SAMs of DMPC were formed by exposing hydrophobic mica to a solution of DMPC in decane/isobutanol and subsequently immersing into pure water. AFM images of samples immersed in solution for varying exposure times showed that before forming a complete monolayer the molecules aggregated into dense islands (2.2-2.6 nm high) on the surface. The islands had a compact and rounded morphology. LFM, coupled with topographic data obtained with the atomic force mode, had made possible the distinction between DMPC and OTS. The rate constant of DMPC growth was calculated. This is the first systematic study of the SAM formation of DMPC by AFM and LFM imaging. It reveals more direct information about the film morphology than previous studies with conventional surface analytical techniques such as infrared spectroscopy, X-ray, or fluorescence microscopy.

Induction effect of Ca2+ on ion-channel behavior of supported phospholipid membranes

As a kind of supported bilayer lipid membranes, hybrid bilayer membrane (HBM) was applied to the interaction between Ca2+ and lipid for the first time. By using Fe(CN)(6)(3-) as a probe, we found that Ca2+ could induce the ion channel of HBM to be in open state. STM images study proved this phenomenon.

Interaction of scopolamine and cholesterol with sphingomyelin bilayers by FT-Raman spectroscopy

The interaction of scopolamine and cholesterol with sphingomyelin bilayers has been investigated by FT-Raman spectroscopy in head-group region (600-1000 cm(-1)), the C-C stretching (1000-1200 cm(-1)), CH2 deformation (1400-1500 cm(-1)) and the C-H stretching (2800-3000 cm(-1)) mode regions. The results indicate that scopolamine and cholesterol do not change the conformation of O-C-C-N+ backbone in the choline group of sphingomyelin bilayers, the polar headgroup is still extending parallel to the bilayer surface and O-C-C-N+ group is still in its gauche conformer. Scopolamine and cholesterol lower the order of the interface, the interchain, CH2 crystal lattices and the lateral chain-chain packing, and increase their fluidity.

Electrochemical studies of lipophilic ion transport through BLM. The influence of sterols on its transport

Cyclic voltammetry was employed to study the influence of sterols on the lipophilic ion transport through the BLM. The mole fraction of the sterols (cholesterol, oxidized cholesterol). as referred to total lipid, was varied in a range of 0-0.8. Data demonstrate that a thin-layer model is suitable to this BLM system. By this model, the number of charges transported per lipophilic ion, the concentration of the ion in the membrane bulk phase and the aqueous/membrane phase partition coefficient could be calculated. These parameters proved that sterols had an obvious influence on the lipophilic ion transport. Cholesterol had a stronger influence on the ion transport than oxidized cholesterol. Its incorporation into egg lecithin membranes increased the partition coefficient beta of the ion up to more than 3-fold. Yet, oxidized cholesterol incorporated into egg lecithin membranes only increased the beta up to less than 2-fold, and the beta had no great variation at different oxidized cholesterol mole fractions. The higher beta obtained was partly due to the trace amount of solvent existing in the core of the lipid bilayers. At the different sterol mole fractions, combining the change of beta with the change of peak current, we also concluded that sterols had somewhat inhibiting effect on the ion transport at the higher sterols mole fraction (>0.4). These results are explained in terms of the possible change of dipole potential of the membrane produced by sterols and the decrease of the membrane fluidity caused by the condensation effect of sterols and the thinning effect caused by sterols. The substituting group (in the oxidized cholesterol) had some inhibiting effects on the ion transport at higher mole fractions (oxidized cholesterol mole fraction >0.4).

NMR and FT-Raman studies on the interaction of lanthanide ions with sphingomyelin bilayers

The interactions of lanthanide ions with sphingomyelin bilayers have been studied by using 2D NOESY spectroscopy and FT-Raman spectroscopy methods. The results indicate that lanthanide ions, as well as divalent calcium, combine mainly to the phosphate group in the polar headgroup and do not change the conformation of O-C-C-N+ backbone in the choline group of sphingomyelin bilayers. The polar headgroup is still extending parallel to the bilayer surface and O-C-C-N+ group is still in its gauche conformer.

Identification of phospholipid structures in human blood by direct-injection quadrupole-linear ion-trap mass spectrometry

Direct-injection electrospray ionization mass spectrometry in combination with information-dependent data acquisition (IDA), using a triple-quadrupole/linear ion trap combination, allows high-throughput qualitative analysis of complex phospholipid species from child whole blood. In the IDA experiments, scans to detect specific head groups (precursor ion or neutral loss scans) were used as survey scans to detect phospholipid classes. An enhanced resolution scan was then used to confirm the mass assignments, and the enhanced product ion scan was implemented as a dependent scan to determine the composition of each phospholipid class. These survey and dependent scans were performed sequentially and repeated for the entire duration of analysis, thus providing the maximum information from a single injection. In this way, 50 different phospholipids belonging to the phosphatidylethanolamine, phosphatidylserine, phosphatidylinositol, phosphatidylcholine and sphingomyelin classes were identified in child whole blood. Copyright (C) 2005 John Wiley & Sons, Ltd.

吡唑啉衍生物有机电致发光器件中激基复合物的发射

以两种吡唑啉衍生物为空穴传输材料(HTM)和BBOT为电子传输材料组成双层器件，获得了相对于组成材料的荧光光谱红移和宽化的电致发光．双层器件和HTM：BBOT等摩尔混蒸薄膜的光致发光及电致发光测量表明，该谱带来自HTM／BBOT界面激基复合物的发射，根据器件的能级图，激基复合物的类型为BBOT的激发态BBOT^

磷脂对光系统II光合放氧的影响及其作用机理的研究

以类囊体膜中唯一的阴离子型磷脂一磷脂酰甘油(PG)为研究对象，应用放氧测定和富立叶红外光谱等实验方法和技术手段，对PG与光系统II (PSII)之间的相互作用进行了研究。 研究表明，PG对PSII的放氧活性产生显著影响，具有明显的浓度效应。在低浓度(2～22 mg PG／mg Chl)时对PSII的放氧活性有明显的促进作用，而在高浓度(24～40 mg PG／mg Chl)下则表现出显著的抑制作用。 PG对PSII放氧活性的影响与其引起蛋白结构的改变密切相关。结果显示，PG的作用导致PSII颗粒中蛋白质二级结构的改变，主要表现为α-螺旋、β-折叠的增加和无规卷曲的减少。 不仅如此，红外光谱的分析还表明，PG还使蛋白酪氨酸残基中的酚基构象及其周围的微极性发生改变，即在红外光谱的1620—1500 cm-1，之间芳香环骨架的伸缩振动带向高频方向变化，其吸收强度也相应增加;在3500～3100 cm. -1间出现新的氢键吸收峰。 PG除能促进PSII的放氧活性以外，还对PSII表现出新的作用，即PG可以使PSII颗粒因缺钙而受抑制的放氧活性得到恢复;外加Ca2+可使PG表现出对缺钙PSII颗粒(dc。PSII)放氧活性的更大促进作用，且随Ca2+浓度的增加，促进作用也越显著。 PG的作用也使dc。PSII蛋白的结构发生了改变，导致蛋白二级结构中a-螺旋、p_折叠结构的增加和转角、无规卷曲成分的减少，即可使PSII颗粒因缺钙而改变的蛋白结构基本得到恢复。PG还能与Ca2+形成离子对似的配合物，而这种配合物的形成可以优化缺钙PSII颗粒的功能如放氧活性等。

蓝藻磷脂磷酸酶基因的缺失对光合作用的影响

磷脂酰甘油(phosphatidylglycerol, PG)是类囊体膜(也叫光合膜)中唯一的一种磷脂。在蓝藻中，PG的合成途径为：磷脂酸(phosphatidic acid, PA)胞嘧啶双磷酸-二酰基甘油 (cytidine diphosphate diacylglycerol, CDP-DAG) 磷酸磷脂酰甘油 (phosphatidylglycerol phosphate, PGP)PG。其中最后一步反应是由PGP去磷酸化而生成PG，催化该反应的是PGP磷酸酶。然而迄今为止，PGP磷酸酶还没有在蓝藻和高等植物中得到克隆和鉴定。本工作在鱼腥藻Anabaena sp. PCC7120中通过将一个可能编码PGP磷酸酶的基因(alr1715)进行突变，获得缺失PG的突变体。与野生型相比，该突变体PG的含量降低了30%左右。突变后的蓝藻藻丝发黄、生长缓慢，叶绿素含量降低。整体细胞的光合作用活性、光系统II(photosystem II，PSII)的放氧活性以及PSII反应中心的光能转化效率显著下降，传递给PSII的激发能减少。

RNAi沉默光合膜磷脂合成酶基因的研究

磷脂是动物和植物非光合组织细胞膜系统的主要组成成分，在细胞生命过程中扮演着重要角色。尽管绿色植物光合膜的的甘油脂主要是糖脂，但是它仍然含有大约10％的磷脂，说明磷脂在光合膜的结构和功能中起重要作用。构成生物膜的磷脂有多种，但是，光合膜只含有磷脂酰甘油（PG）一种磷脂。光合膜中的PG有其特殊性，即：在PG的sn-2位上总连着一个棕榈酸（16:0）或者反式十六碳烯酸（16:1trans），说明了这种具有特殊结构的甘油脂在维持类囊体膜的结构和功能方面具有重要的作用。 叶绿体中有两个重要酶参与了PG的生物合成，它们分别是胞嘧啶二脂酰甘油合成酶（CDS）和磷脂酰甘油合成酶（PGS）。本实验以烟草和马铃薯为材料，利用RNAi技术，对CDS和PGS基因的表达进行抑制，通过PG缺失突变体，研究其功能。 对转含有PGS片段的沉默结构的转基因烟草叶片膜脂进行了分析，结果表明，与野生型烟草相比较，其PG含量下降了约20%，同时，SQDG和PC的含量增加。PG含量的降低没有引起MGDG和DGDG含量的变化。另外，我们还对转基因植株目的基因片段的RNA表达水平进行了RT-PCR分析，发现其表达量大幅度降低。这些结果表明，在转基因株系中，PGS基因的表达受到了抑制，说明我们获得了PG部分缺失的烟草PGS突变体。 对烟草PG缺失体的PG脂肪酸组成进行分析，表明其特征性脂肪酸反式十六碳烯酸含量明显下降，比野生型降低了44%，C18:0、C18:1和C18:2的相对含量增加，整个变化与总脂脂肪酸变化基本一致。 为了研究PG缺失对光合作用的影响，我们分析了多种光合指标。对叶绿素含量的分析表明，PG含量的降低影响了光合色素的组成。PG部分缺失的转基因烟草中的叶绿素总的含量下降，其中叶绿素b含量下降更为明显，结果，叶绿素a与叶绿素b的比值较野生型高。转基因植株净光合速率下降，二氧化碳利用率降低;PSII的最大光化学效率（Fv/Fm）和实际光化学效率（фPSII）降低，光化学猝灭下降，非光化学猝灭增加，尤其老叶的变化更为明显。这些结果说明了PG的部分缺失影响了植株的光合能力，捕光色素蛋白复合体的结构受到了影响，PSII功能遭受损伤。 同时，我们根据已经报道的马铃薯CDS基因，克隆了一个片段，构建沉默结构，并对沉默结构进行了转化。通过抗性基因的筛选以及RT-PCR检测，证明了沉默结构转化成功，目的基因的表达受到抑制，获得了马铃薯CDS转基因植株。 对马铃薯野生型和CDS转基因植株进行膜脂和脂肪酸分析表明，转基因植株叶片的PE、PG和PC等磷脂含量降低，SQDG和DGDG含量增加;C16:1（3t）、C16:2、C16:3、C18:1和C18:2含量下降，C16:0和C18:3含量增加，而C16:1和C18:0变化不明显。马铃薯CDS转基因植株的叶绿素荧光分析表明，PSII最大光化学效率降低，从野生型的0.82下降到0.77。

Characteristics of the microbial communities in the integrated vertical-flow constructed wetlands

Microorganisms play an important role in removing pollutants from constructed wetlands. We investigated the microbial characteristics in a novel integrated vertical-flow constructed wetland (IVCW), which has been in operation in Wuhan, China since 1998. We used phospholipid fatty acid (PLFA) and amoA gene to analyze the structure and diversity of the microbial community within the IVCW. PLFA results suggested that the amount of bacterial PLFA was significantly higher than that of fungal PLFA, but the total microbial biomass represented by PLFA index was low in the system. Microbial spatial distribution showed significantly higher bacterial (both G(+) and G(-)) and fungal biomass in the surface than in the subsurface layers. The ratios of monounsaturated to branched PLFA demonstrated that an anaerobic layer sandwiched by two aerobic layers existed in the IVCW, consistent with the redox potential results. Analysis of the amoA revealed the presence of Nitrosomonas-like sequences in the surface substrate of the downflow chamber and apparent diversities of ammonia-oxidizing bacteria in the system. These results suggest that microorganisms, despite their relatively low biomass, have inhabited the IVCW, and the results will offer some valuable information on microbe to system designers and managers.

Cell responses of Dunaliella salina FACHB 435 (green alga) to microgravitational stimulation by clinorotation

Clinorotation experiments were established to simulate microgravity on ground. It was found that there were obvious changes of Dunaliella salina FACHB435 cells and their metabolic characteristics during clinorotation. The changes included the increases of glycerol content, the rate of H+ secretion and PM H+-ATPase activity, and the decrease of ratio of the plasma membrane (PM) phospholipid to PM protein. These results indicated that microgravity was a stress environment to Dunaliella salina. It is deduced that it would be possible to attribute the effect of microgravity on algal cells to the secondary activation of water stress.

Fracture Properties of LPCVD Silicon Nitride and Thermally Grown Silicon Oxide Thin Films From the Load-Deflection of Long Si3N4 and SiO2/Si3N4 Diaphragms

The bulge test is successfully extended to the determination of the fracture properties of silicon nitride and oxide thin films. This is achieved by using long diaphragms made of silicon nitride single layers and oxide/nitride bilayers, and applying comprehensive mechanical model that describes the mechanical response of the diaphragms under uniform differential pressure. The model is valid for thin films with arbitrary z-dependent plane-strain modulus and prestress, where z denotes the coordinate perpendicular to the diaphragm. It takes into account the bending rigidity and stretching stiffness of the layered materials and the compliance of the supporting edges. This enables the accurate computation of the load-deflection response and stress distribution throughout the composite diaphragm as a function of the load, in particular at the critical pressure leading to the fracture of the diaphragms. The method is applied to diaphragms made of single layers of 300-nm-thick silicon nitride deposited by low-pressure chemical vapor deposition and composite diaphragms of silicon nitride grown on top of thermal silicon oxide films produced by wet thermal oxidation at 950 degrees C and 1050 degrees C with target thicknesses of 500, 750, and 1000 mn. All films characterized have an amorphous structure. Plane-strain moduli E-ps and prestress levels sigma(0) of 304.8 +/- 12.2 GPa and 1132.3 +/- 34.4 MPa, respectively, are extracted for Si3N4, whereas E-ps = 49.1 +/- 7.4 GPa and sigma(0) = -258.6 +/- 23.1 MPa are obtained for SiO2 films. The fracture data are analyzed using the standardized form of the Weibull distribution. The Si3N4 films present relatively high values of maximum stress at fracture and Weibull moduli, i.e., sigma(max) = 7.89 +/- 0.23 GPa and m = 50.0 +/- 3.6, respectively, when compared to the thermal oxides (sigma(max) = 0.89 +/- 0.07 GPa and m = 12.1 +/- 0.5 for 507-nm-thick 950 degrees C layers). A marginal decrease of sigma(max) with thickness is observed for SiO2, with no significant differences between the films grown at 950 degrees C and 1050 degrees C. Weibull moduli of oxide thin films are found to lie between 4.5 +/- 1.2 and 19.8 +/- 4.2, depending on the oxidation temperature and film thickness.