基于遗传算法进行加速器自动调束

　介绍了遗传算法的基本理论,及其应用于加速器调束过程中的设计要点,给出基于遗传算法进行加速器自动调束的设计方法,并编写遗传算法程序针对HIRFL中的一段束流输运线进行了计算机仿真实验,证明了基于遗传算法进行自动调束的可行性,指出了自动调束技术的未来研究方向。

Pollen record from red clay sequence in the central Loess Plateau between 8.10 and 2.60 Ma

IEECAS SKLLQG

中国大陆生物质燃烧排放的污染物清单

IEECAS SKLLQG

The beta decay of N-21

The beta-delayed neutron and gamma energy spectra taken from the decay of neutron-rich nucleus N-21 were measured by using the beta - gamma and beta - n coincidence detection method. Thirteen new neutron groups ranging from 0.28MeV to 4.98 MeV and with a total branching ratio of 88.7 +/- 4.2% were observed and presented. One gamma transition with an energy of 1222 keV emitted from the excited state of O-21, and four gamma transitions with energies of 1674, 2397, 2780, and 3175 keV emitted from the excited states of O-20 were identified in the 3 decay chain of N-21. The beta decay half-life for N-21 is determined to be 82.9 +/- 1.9 ms. The uncertainty of half-life is much smaller than the previous result.

从“DIVERSITAS计划新方案”看生物多样性研究的发展趋势

从“ＤＩＶＥＲＳＩＴＡＳ计划新方案”看生物多样性研究的发展趋势赵士洞（中国科学院自然资源综合考察委员会，北京１００１０１））郝占庆（中国科学院沈阳应用生态研究所，沈阳１１００１５）国际生物多样性合作研究计划“ＤＩＶＥＲＳＩＴＡＳ”，是目前唯一的致力...

中国水蚀土壤抗剪强度研究

利用野外测试数据、土壤样品的室内理化分析数据和参考文献数据 ,对水蚀区范围内水土流失过程中的土壤抗剪强度进行了初步研究 ,建立了中国水土流失土壤抗剪强度的回归模型 ,总结出水蚀区范围内水蚀过程中有关土壤抗剪强度的 3条结论 :影响水土流失过程中土壤抗剪强度的主导因素是容重、粉 /黏、土壤含水量、土壤有机质含量 ;抗剪强度随土壤类型发生有规律的变化 ;抗剪强度在中国水蚀区范围内有较明显的空间分异规律 (包括水平分异规律和垂直剖面构型规律 )

作物生育模型及其在作物生产中的应用

作物生长发育模型指根据作物生长规律对作物生长过程进行的定量模拟,是对作物生理过程及其与外部环境之间关系的抽象概括。通过对国内外作物生长发育模型的总结和整理,分析不同阶段代表性作物生长发育模型及其主要特点,提出了作物生长发育模型的发展趋势。

西安木本植物物候与气候要素的关系

根据1963–2007年中国物候观测网西安观测站的物候和气温、降水资料,分析了西安站34种木本植物春季展叶始期、展叶盛期、始花期和盛花期等4个关键物候期的变化趋势、对气候变化的阶段响应特点及其与气温、降水变化的关系。结果表明,1963年以来,西安地区气温呈显著上升趋势,特别是1994年前后,气温发生明显突变,上升趋势更加明显;西安春季物候变化主要呈现提前趋势。在45年中,观测到的34种植物的展叶始期平均提前1天,展叶盛期平均提前1.4天,始花期平均提前9天,盛花期平均提前12天;以突变点为界,34个物种1

Synthesis and assembly of Au-Pt bimetallic nanoparticles

Au-Pt bimetallic nanoparticles (NPs) were synthesized by reducing the mixture of HAuCl4 and K2PtCl6 with ethanol in the presence of cinnamic acid (C6H5CHCHCO2H, CA) through a thermal process. It was found that the isolated NPs could gradually self-assemble into chain-like structures, ultimately to 3-dimensional network nanostructures by adjusting the molar ratio of CA to K2PtCl6. Energy-dispersive Spectroscopy, X-ray photoelectron spectroscopy and X-ray diffraction was used to confirm the formation of Au-Pt bimetallic nanostructures.

Synthesis and assembly of Au-Pt bimetallic nanoparticles

Au-Pt bimetallic nanoparticles (NPs) were synthesized by reducing the mixture of HAuCl4 and K2PtCl6 with ethanol in the presence of cinnamic acid (C6H5CHCHCO2H, CA) through a thermal process. It was found that the isolated NPs could gradually self-assemble into chain-like structures, ultimately to 3-dimensional network nanostructures by adjusting the molar ratio of CA to K2PtCl6. Energy-dispersive Spectroscopy, X-ray photoelectron spectroscopy and X-ray diffraction was used to confirm the formation of Au-Pt bimetallic nanostructures. It was worthwhile noting that the bimetallic NPs with the novel structures prepared by our method exhibited an attractive catalytic activity for the hydrogen evolution reaction in an acidic solution.

Preparation and properties of ternary polyimide/SiO2/polydiphenyisiloxane composite films

A series of novel ternary polyimide/SiO2/polydiphenylsiloxane (PI/SiO2/PDPhS) composite films were prepared through co-hydrolysis and condensation between tetramethoxysilane, diphenyldimethoxysilane (DDS) and aminopropyltriethoxysilane-terminated polyamic acid, using an in situ sol-gel method. The composite films exhibited good optical transparency up to 30 wt% of total content of DDS and SiO2. SEM analysis showed that the PDPhS and SiO2 were well dispersed in the PI matrix without macroscopic separation of the composite films. TGA analysis indicated that the introduction of SiO2 could improve the thermal stability of the composite films. Dynamic mechanical thermal analysis showed that the composite films with low DDS content (5 wt%) had a higher glass transition temperature (T-g) than pure PI matrix. When the content of DDS was above 10 wt%, the T-g of the composite decreased slightly due to the plasticizing effect of flexible PDPhS linkages on the rigid PI chains. The composite films with high SiO2 content exhibited higher values of storage modulus. Tensile measurements also showed that the modulus and tensile strength of the composite films increased with increasing SiO2 content, and the composite films still retained a high elongation at break due the introduction of DDS.