Inhibition of no tail (ntl) gene expression in zebrafish by external guide sequence (EGS) technique

External guide sequence (EGS) technique, a branch of ribozyme strategy, can be enticed to cleave the target mRNA by forming a tRNA-like structure. In the present study, no tail gene (ntl), a key gene participating in the formation of normal tail, was used as a target for ribonuclease (RNase) P-mediated gene disruption in zebrafish in vivo. Transient expression of pH1-m3/4 ntl-EGS or pH1-3/4 ntl-EGS produced the full no tail phenotype at long-pec stage in proportion as 24 or 35%, respectively. As is expected that the full-length ntl mRNA of embryos at 50% epiboly stage decreased relative to control when injected the embryos with 3/4 EGS or m3/4 EGS RNA. Interestingly, ntl RNA transcripts, including the cleaved by EGS and the untouched, increased. Taken together, these results indicate that EGS strategy can work in zebrafish in vivo and becomes a potential tool for degradation of targeted mRNAs.

Knock down of gfp and no tail expression in zebrafish embryo by in vivo-transcribed short hairpin RNA with T7 plasmid system

A short-hairpin RNA (shRNA) expression system, based on T7 RNA polymerase (T7RP) directed transcription machinery, has been developed and used to generate a knock down effect in zebrafish embryos by targeting green fluorescent protein (gfp) and no tail (ntl) mRNA. The vector pCMVT7R harboring T7RP driven by CMV promoter was introduced into zebrafish embryos and the germline transmitted transgenic individuals were screened out for subsequent RNAi application. The shRNA transcription vectors pT7shRNA were constructed and validated by in vivo transcription assay. When pT7shGFP vector was injected into the transgenic embryos stably expressing T7RP, gfp relative expression level showed a decrease of 68% by analysis of fluorescence real time RT-PCR. As a control, injection of chemical synthesized siRNA resulted in expression level of 40% lower than the control when the injection dose was as high as 2 mu g/mu l. More importantly, injection of pT7shNTL vector in zebrafish embryos expressing T7RP led to partial absence of endogenous ntl transcripts in 30% of the injected embryos when detected by whole mount in situ hybridization. Herein, the T7 transcription system could be used to drive the expression of shRNA in zebrafish embryos and result in gene knock down effect, suggesting a potential role for its application in RNAi studies in zebrafish embryos.

Fixation of carbon dioxide into aliphatic polycarbonate, cobalt porphyrin catalyzed regio-specific poly(propylene carbonate) with high molecular weight

Cobalt porphyrin complex ((TPPCoX)-X-III) (TPP = 5, 10, 15, 20-Tetraphenylporphyrin; X = halide) in combination with ionic organic ammonium salt was used for the regio-specific copolymerization of propylene oxide and carbon dioxide. A turnover frequency of 188 h(-1) was achieved after 5 h, and the byproduct propylene carbonate was successfully controlled to below 1%, where the obtained poly(propylene carbonate) (PPC) showed number average molecular weight (M-n) of 48 kg/mol, head-to-tail content of 93%, and carbonate linkage of over 99%.

Extended-chain lamellar packing of poly(3-butylthiophene) in single crystals

We developed an approach, i.e. solvent-assist crystallization (SAC), for growing high quality single crystals of head-to-tail regio-regular poly(3-butylthiophene) (P3BT). By means of atomic force microscopy, electron diffraction and X-ray diffraction, we found that P3BT macromolecules formed lamella single crystals through gradient crystallization, and in the single crystals, molecules packed normal to the lamella with extended-chain conformation with alkyl side chains in the growth front during crystallization.

Electron-beam irradiation on poly(propylene carbonate) in the presence of polyfunctional monomers

Poly(propylene carbonate) (PPC) showed predominantly degradation under electron-beam irradiation, accompanied by deterioration of its mechanical performance due to sharp decrease of the molecular weight. Crosslinked PPC was prepared by addition of polyfunctional monomer (PFM) to enhance the mechanical performance of PPC. When 8 wt% of PFM like triallyl isocyanurate (TAIL) was added, crosslinked PPC with a gel fraction of 60.7% was prepared at 50 kGy irradiation dose, which showed a tensile strength at 20 degrees C of 45.5 MPa, whereas it was only 38.5 MPa for pure PPC. The onset degradation temperature (T-i) and glass transition temperature (T-g) of this crosslinked PPC was 246 degrees C and 45 degrees C, respectively, a significant increase related to pure PPC of 211 degrees C and 36 C. Therefore, thermal and mechanical performances of PPC could be improved via electron-beam irradiation in the presence of suitable PFM.

High order liquid crystalline structure of poly(11-{[(4 '-heptyloxy-4-biphenylyl)carbonyl]oxy}-1-undecyne)

Liquid crystalline properties of a mesomorphic polyacetylene {-[HC=C(CH2 )(9)OOC-Biph-OC7H15](n)- (PA9EO7), Biph=4-4'-biphenylyl} are investigated by X-ray diffraction, polarizing optical microscope, and transmission electron microscope. Polyacetylene PA9EO7 from solution adopts a sandwich structure, which is a high order smectic phase. The biphenylyl pendants pack in a hexagonal fashion and the distance between two appendages is 4.51 Angstrom. The heptyloxy tails on one polymer backbone overlap with those on the neighboring chain. The nonyl spacer and the heptyloxy tail exhibit a hexagonal packing arrangement with intermolecular distance of 3.24 Angstrom.

Poly(3-dodecylthiophenes) polymerized with different amounts of catalyst

The effect of the amount of the catalyst FeCl3, used during the direct oxidation polymerization, on the structure and properties of the obtained poly(3-dodecylthiophene) (P3DDT) was investigated in this paper. Such measurements as gel permeation chromatography (GPC), nuclear magnetic resonance (NMR) spectroscopy, thermal analysis, X-ray diffraction, infrared spectroscopy (FTIR) and ultraviolet-visible (W-vis) spectroscopy were applied. It is found that a suitable addition of FeCl3 can contribute to generate a P3DDT with greater percentage of head-to-tail head-to-tail (HT-HT) linkages, which are generally favored. The reduction of the other linkage defects helps to lengthen conjugation length, thus leading to more orderly chain packing. (C) 2000 Elsevier Science S.A. All rights reserved.

The interaction between poly(vinylpyrrolidone) and reversed micelles of water/AOT/n-heptane

The interactions between poly(vinylpyrrolidone) (PVP) and the reversed micelles composed of water, AOT, and n-heptane are investigated with the aid of phase diagram, measurements of conductivity and viscosity, Fourier transform infrared (FTIR) spectrum, and dynamic light scattering (DLS). The phase diagrams of water/AOT/heptane in the presence of and absence of PVP are given. The conductivity of the water/AOT/heptane reversed micelle without PVP initially increases and then decreases with the increase of water content, ω0 (the molar ratio of water to AOT), while the plots of conductivity (K) versus ω0 of the reversed micelle in the presence of PVP depend on the PVP concentrations. The plot of K versus ω0 with 2.0%wt PVP is similar to that without PVP. Only the ω0,max (the water content that the maximum conductivity corresponds to) is larger than that without PVP. Nevertheless, the conductivity of the reversed micelle containing more than 4%wt PVP always rises with the increase of the water content in the measured range. The DLS results indicate that the hydrodynamic radius (Rh) in the presence and absence of PVP rises with the increase of ω0. The plots with PVP and without PVP have almost the same value when ω0<17; and after that, it quickly increases with the increase of ω0. It is interesting to find that there is almost no effect of the PVP concentration on the viscosity and Rh of the reversed micelle at ω0 = 15. The FTIR results suggest that the contents of SO3--bound water and Na+-bound water both decrease with PVP added, while the content of the bulky-like water increases. However, the trapped water in the hydrophobic chain of the surfactant is nearly unaffected by PVP. It is also found from the FTIR that the carbonyl group stretching vibration of AOT is fitted into two sub-peaks, which center at 1740 and 1729 cm-1, corresponding to the trans and cis conformations of AOT, respectively.

Experimental Characterization Of Electrical Current Leakage In Poly(Dimethylsiloxane) Microfluidic Devices

Poly(dimethylsiloxane) (PDMS) is usually considered as a dielectric material and the PDMS microchannel wall can be treated as an electrically insulated boundary in an applied electric field. However, in certain layouts of microfluidic networks, electrical leakage through the PDMS microfluidic channel walls may not be negligible, which must be carefully considered in the microfluidic circuit design. In this paper, we report on the experimental characterization of the electrical leakage current through PDMS microfluidic channel walls of different configurations. Our numerical and experimental studies indicate that for tens of microns thick PDMS channel walls, electrical leakage through the PDMS wall could significantly alter the electrical field in the main channel. We further show that we can use the electrical leakage through the PDMS microfluidic channel wall to control the electrolyte flow inside the microfluidic channel and manipulate the particle motion inside the microfluidic channel. More specifically, we can trap individual particles at different locations inside the microfluidic channel by balancing the electroosmotic flow and the electrophoretic migration of the particle.

Micromachining Of Passive Planar Micromixer On Poly (Methyl Methacrylate) Substrate With Excimer Laser Ablation

Excimer laser ablation technique was introduced into this work to fabricate a passive planar micromixer on the PMMA substrate. T-junction shaped and width-changed S-shaped microchannels were both designed in this micromixer to enhance mixing effect. The mixing experiment of distilled water and Rhodamine B with injection flow rate of 500 and 1,500 mu m/s validates the mixing effectivity of this micromixer, and indicates the feasibility of excimer laser ablation in the microfabrication of mu-TAS device.

Tm-doped fibre laser pumped Cr2+: ZnSe poly-crystal laser

Demonstrations of cw lasing in Cr2+:ZnSe poly-crystal are reported. The laser consists of a 1.7-mm-thick Cr2+:ZnSe poly-crystal disc pumped by a Tm-silica double-clad fibre laser at 2050nm. Using a concave high-reflection mirror with a radius of curvature of 500mm as the rear mirror, the laser delivers up to 1030mW of radiation around 2.367 mu m.

冬小麦春化过程中低温诱导的开花特异mRNA及蛋白质的合成

本实验以冬小麦“农大139”（T. aestivum L. cv. Nongda 139）为材料对春化作用诱导开花的分子机制作了一些探讨，主要结果如下： 1. 应用SDS-PAGE及高分辨双向电泳技术，比较了冬小麦给予春化、脱春化及超期春化处理后的电泳图谱，并结合对春小麦对照样品的分析，结果发现有一些蛋白质和春化作用紧密相关，它们随春化而出现、随脱春化而消失，并在不经低温处理即可以开花的春小麦对照中存在。也就是说，这些开花特异的蛋白质（FSPs）的存在或在诱导下的合成和小麦抽穗开花能力的获得存在一种正相关，因此推测它们在冬小麦由营养生长状态向生殖生长状态转变的过程中起了关键性的作用。 2. 从不同处理的及对照样品中提取mRNA进行体外翻译的结果表明：春化作用过程中低温诱导了mRNA组分的变化，其中一些新产生的mRNA种类与春化诱导的开花能力的获得呈高度相关，即它们是开花特异的（Flower Specific），它们中有的只在春化的特定时期存在并起作用。 3．比较体内分析及体外翻译的结果发现，一些开花特异蛋白质（FSPs）可以同时在体内提取物及体外翻译产物中检测到，因此，春化作用中开花特异蛋白质诱导合成的调节很可能发生在转录水平上。 4．基于以上结果的分析可以推测春化诱导开花是低温导致了开花特异基因表达的结果，超期春化的效应不能被脱春化所逆转则系编码这些开花特异蛋白质的基因在长期低温条件下转变成了组成性表达所致。 有关低温诱导产生的开花特异蛋白质的性质与功能及编码这些蛋白质的基因尚需进一步研究。

长日照处理对短日植物紫花牵牛开花的仰制

本文以日本紫花牵牛花为材料，观察分析了其对不同光周期的反应应特性以及不同光周期处理条件下子叶蛋白质和mRNA的变状况。实验结果归纳如下：1、经不同天数短日照处理的幼苗导致植株开花特性明显不同。2、实验结果表明，12小时暗期长度可能是诱导光周期的临界暗期长度。3、经双向电泳分析观察到，长日照处理的牵牛子叶内存在着分子量分别为16.5KD(PI4.1), 16.5KD(PI4.2), 21.6KD(PI8.8)及21.7KD(PI8.3)四种蛋白质，它们在短日诱导条件下消失，表明这些蛋白质的存在可能与抑制花芽分化有关。4、提取经短日照诱导和连续光照子叶内的PolY(A~+)RNA, 进行体外翻译，观察表明光周期诱导过程是在转录水平上的调节。短日照处理不仅有促进芽分化的作用，同时还有消除长日照的抑制效应。

光敏核不育水稻中光敏色素A mRNA的丰度分析及光敏色素A和B生物功能的分析

本文以光敏色素A (phyA)的特异性基因片段RPA3为探针，利用RNA斑点杂交的方法对光敏核不育水稻农垦58S及对照农垦58叶片中phyA mRNA的丰度进行了分析。结果显示：在育性转换敏感期，光周期处理O天时，农垦58S (NK 58S) phyA mR-NA的丰度比农垦58 (NK 58) phyA mRNA的高。光周期处理5天（雌雄蕊原基形成期）及10天（花粉母细胞形成期）时，短日照条件下(SD)，NK 58S phyA mRNA的丰度均比NK58高。进一步比较3天龄NK58S及NK58黄化苗中phyA基因表达的差异，发现NK58S phyA mRNA的丰度比NK58高，并且两品种均符合黄化苗中phyA对其mRNA丰度的负调控作用。这一结果进一步证实：甲基化水平低的NK58S phyA基因比NK58 phyA基因更活跃地表达，进而导致转录水平与翻译水平上的差异，最终参与调节NK 58S的育性转换。 另外，通过持续远红光和红光照射黄化水稻幼苗诱导叶绿素合成的实验，分析了NK58S与NK58之间光敏色素生物功能的差异。持续远红光高辐照度反应(FR-HIR)由phyA负责调节，持续红光高辐照度反应(R-HIR)由phyB负责调节。实验结果显示：持续FR使NK58S与NK58合成叶绿素的含量在12 h时达到最高，并且NK58中叶绿素合成的相对效应比NK585高。持续R使NK58S及NK58中叶绿素的含量在24小时连续处理下持续增加，而且在此时间进程中，NK58中叶绿素合成的相对效应也都比NK58S高。这些结果说明在NK58S和NK58中phyA和phyB均参与了叶绿素合成的调节，并且phyA，phyB在NK58S和NK58黄化苗转绿过程中的作用存在差异。