在役设备材料弹塑性力学参数测定方法综述——小冲杆实验力学研究进展之一

20多年以来,采用小型试件的小冲杆试验技术来测量在役设备材料的各种力学参数已经取得了很大进展,这个方法已经用来确定材料的弹性模量、屈服强度、塑性性能、抗拉强度、韧-脆转变温度、断裂韧度、蠕变性能和黏塑性性能等各种力学性能。由于从小冲杆试验的测量结果来确定材料的力学性能是一个反问题,因此,与此有关的反问题分析方法也得到了相应的发展。本文系统综述小冲杆试验的测量技术及从测量数据来确定材料弹塑性参数的各种经验方法和计算方法,例如有限元分析和参数法、反向有限元法、有限元和反方法、反向识别和人工神经网络、有限元优化和试验变形形状以及杂交反方法等。

Study on fatigue crack nucleation of electrodeposited nanocrystalline nickel

The mechanism of fatigue crack nucleation for nanocrystalline (nc) nickel was experimentally investigated in this paper. The samples of electrodeposited ne nickel were loaded cyclically by using a three point bending instrument at first. Then, atomic force microscopy (AFM) was used to scanning the sample surface after fatigue testing. The results indicated that, after fatigue testing, there are vortex-like cells with an average size of 108nm appeared along the crack on nc nickel sample. And, the roughness of sample surface increased with the maximum stress at the surface.

固体力学进展及应用: 庆贺李敏华院士90华诞文集

《固体力学进展及应用：庆贺李敏华院士90华诞文集》收录了近代固体力学基础理论及其应用领域的重要科技成果和最新进展。作者是在同体力学领域工作多年的资深研究员，他们来自各行各业，有丰富的科研与丁作经验。他们提供的论文在相当程度上反映当前同体力学的发展现状与成就，并能看出发展趋势，对未来研究的课题选择有参考价值。《固体力学进展及应用：庆贺李敏华院士90华诞文集》还收集了李敏华院士的珍贵照片和纪念李敏华院士90华诞的庆贺和回忆文章，具有重要的史料价值。

盐岩地层套管蠕变荷载试验及其数值分析

中原油田在钻遇盐岩层的油水井中,某些区块套管的损坏率高达65%,盐岩层蠕变是套管损坏的一个重要原因.通过对6块盐岩岩心进行地下条件的蠕变模拟试验,得出了盐岩层的蠕变规律和特征参数,建立了套管承受外载的有限元计算模型,并编制了计算程序.利用所编制的软件对中原油田某口井的套管蠕变载荷进行了数值模拟计算.结果表明,作用在套管上的径向载荷与相位角和蠕变时间有关,并且蠕变条件下套管的最大载荷超过原地应力10%左右.

Factors Resulting In Micron Indentation Hardness Descending In Indentation Tests

Some factors that affect the experimental results in nanoindentation tests such as the contact depth, contact area, load and loading duration are analyzed in this article. Combining with the results of finite element numerical simulation, we find that the creep property of the tested material is one of the important factors causing the micron indentation hardness descending with the increase of indentation depth. The analysis of experimental results with different indentation depths demonstrates that the hardness decrease can be bated if the continuous stiffness measurement technique is not adopted; this indicates that the test method itself may also be one of the factors causing the hardness being descended.

Catastrophic rupture of heterogeneous brittle materials under impact loading

The catastrophic failure of heterogeneous brittle materials under impact loading is not fully understood. To describe the catastrophic failure behavior of heterogeneous brittle materials under impact loading, an elasto-statistical-brittle (ESB) model is proposed in this paper. The ESB model characterizes the disordered inhomogeneity of material at mesoscopic scale with the statistical description of the shear strength of mesoscopic units. If the applied shear stress reaches the strength, the mesoscopic unit fails, which causes degradation in the shear modulus of the material. With a simplified ESB model, the failure wave in brittle material under uni-axial compression is analyzed. It is shown that the failure wave is a wave of strain or particle velocity resulted from the catastrophic fracture in an elastically stressed brittle media when the impact velocity reaches a critical value. In addition, the failure wave causes an increase in the rear surface velocity, which agrees well with experimental observations. The critical condition to generate failure wave and the speed of failure wave are also obtained.

Effects of convection and solid wall on the diffusion in microscale convection flows

The diffusive transport properties in microscale convection flows are studied by using the direct simulation Monte Carlo method. The effective diffusion coefficient D is computed from the mean square displacements of simulated molecules based on the Einstein diffusion equation D = x2 t /2t. Two typical convection flows, namely, thermal creep convection and Rayleigh– Bénard convection, are investigated. The thermal creep convection in our simulation is in the noncontinuum regime, with the characteristic scale of the vortex varying from 1 to 100 molecular mean free paths. The diffusion is shown to be enhanced only when the vortex scale exceeds a certain critical value, while the diffusion is reduced when the vortex scale is less than the critical value. The reason for phenomenon of diffusion reduction in the noncontinuum regime is that the reduction effect due to solid wall is dominant while the enhancement effect due to convection is negligible. A molecule will lose its memory of macroscopic velocity when it collides with the walls, and thus molecules are hard to diffuse away if they are confined between very close walls. The Rayleigh– Bénard convection in our simulation is in the continuum regime, with the characteristic length of 1000 molecular mean free paths. Under such condition, the effect of solid wall on diffusion is negligible. The diffusion enhancement due to convection is shown to scale as the square root of the Péclet number in the steady convection regime, which is in agreement with previous theoretical and experimental results. In the oscillation convection regime, the diffusion is more strongly enhanced because the molecules can easily advect from one roll to its neighbor due to an oscillation mechanism. © 2010 American Institute of Physics. doi:10.1063/1.3528310

青藏高原青稞淀粉资源的评价

青稞（Hordeum vulgare L.var．nudum Hook．f.），即裸大麦，是兼食用、饲用和酿造于一体的作物，有着重要的利用价值。淀粉是青稞籽粒中含量最多、最重要的碳水化合物，淀粉含量、直支淀粉比将会直接影响淀粉的功能特性，进而影响淀粉的应用领域。我国青藏高原青稞的栽培和食用历史悠久，特色青稞资源极其丰富。目前关于青藏高原青稞淀粉特性的报道还不多见，筛选和培育特色淀粉青稞利于拓展青稞的应用领域, 从而提高其经济价值。 本研究以114份青藏高原青稞品种(系)为实验材料，通过SDS-PAGE对材料的胚乳淀粉颗粒结合蛋白（SGAPs）进行分离，确定各蛋白的分子量大小、组合类型和多态性等。然后按照国标法测试材料的籽粒总淀粉含量和直链淀粉含量，通过微型糊化粘度仪分析相应的淀粉糊化特性，最后使用显微镜观察比较了青稞的淀粉颗粒形态特征。主要结果如下： 1、114种青稞中共分离出20种不同的SGAP条带，条带分子量为35.00～112.39 KDa，分布频率为12.28～97.37%。材料含有的SGAPs条带数从10到14不等，超过一半的材料含11种SGAP条带。20种条带形成16种组合类型，其中西藏地区青稞包含所有16个组合类型，四川地区青稞包含其中12个组合类型。青藏高原青稞籽粒淀粉颗粒结合蛋白的差异很大，遗传多样性丰富。 2、114份青稞的总淀粉含量、直链淀粉含量、直支淀粉比、峰值粘度、糊化温度和峰值温度的变幅分别为51.26～66.70%、14.64～29.74%、0.17～0.42、194～1135BU、58.8～65.2℃和81.4～92.4℃，相应的平均值分别为59.82%、23.60%、0.31、722.30BU、62.1℃和88.8℃。群体在总淀粉含量、直链淀粉含量、直支淀粉比、峰值粘度、糊化温度和峰值温度上的分布具有明显的正态性；所有胚乳淀粉体的淀粉粒都呈复粒结构。对西藏和四川的材料进行了分组比较， 两地区的青稞在直链淀粉含量和直支淀粉比上的差异达到显著水平。 3、筛选出18份具有特殊淀粉特性的青稞品种，其中5份材料的总淀粉含量超过65%，包括NB63-1、NB67、甘孜白六棱、98221-1和NB63；3份材料的直链淀粉含量大于29%，包括藏青85、藏青3号和喜马拉6号；8份材料的直支淀粉比小于0.25，包括99033-6、春青稞、阿坝330、Jan-03、米麦114、396、NB63-1和92013；7份材料的糊化温度低于60℃，同时材料的峰值粘度大于1000BU,并且峰值温度低于90℃，包括足捉春、Jan-03、阿坝330、米麦114、春青稞、20003和阿青5号。 4、各淀粉特性间存在高度相关性。直链淀粉含量和直支淀粉比与糊化温度成极显著正相关，与峰值粘度成极显著负相关，与A型淀粉粒数量和大小呈负相关。不同SGAPs组合的品种之间，淀粉含量和淀粉糊化特性间差异均达显著水平。SGAP2、SGAP5、SGAP6和SGAP7可能对籽粒直链淀粉含量、直支淀粉比和糊化温度有正向效应；SGAP3、SGAP9∼SGAP20可能对峰值粘度有正向效应。 本研究对青藏高原青稞淀粉资源进行了较为全面的评价，对该区青稞淀粉特性有了系统的认识。研究筛选出的特殊青稞品种可作为青稞育种和青稞淀粉工业应用的潜在资源，淀粉特性差异巨大的众多青稞品种也为拓宽青稞应用领域提供了丰富的资源保障。本研究对部分SGAPs在性质上的鉴定和功能上的初步推断为青稞材料的筛选提供了指导，也为品质育种提供了理论参考。 Hulless barley (naked barley, Hordeum vulgare L.) is a short- season, early maturing crop with a wide range of adaptation. It has been attracting more and more attention due to its superior nutrition and extensive industrial applications. Starch is the main ingredient in hulless barley seeds which makes up 65 percent of hulless barley’s dry weight. The ratio of the amylose/amylopectin and the size, shape, distribution of starch granules can affect the physico-chemical and functional properties of starch, which may turn affect its utilizations. The Qinghai-Tibet Plateau, which is located in southwestern China, is a typical area of vertical agricultural ecosystem and one of the barley origin centers with abundant hulless barley resources. There are little reports about hulless barley in Qinghai-Tibet Plateau at present. To screen and cultivate some characteristic hulless barley can improve its value. An improved SDS-PAGE was used to identify SGAPs combination of 114 hulless barley varieties. Starch content (total starch and amylose starch) was determined according to the standard methods GB5006-85 and GB/T 15683 using PerkinElmer M341 Precision Automatic Polarimeter and UV spectrophotometer 755B respectively. The pasting properties were measured by BRABENDER Micrio Visco-Amylo- Graph 803201. The morphology of starch granules were observed and compared with Axioplan 2 Imaging light microscopy. The following were the results obtained: 1. There were 20 major SGAPs presented in 114 varieties, with the molecular weight ranged from 35.00 to 112.39 KDa, and the frequencies ranged from 12.28% to 97.37%. The number of SGAP bands in each accession varied from 10 to 14, more than half of the population had 11 bands. There were 16 distinct SGAP patterns in the 114 varieties, the Tibet hulless barley had all of the 16 types and the Sichuan hulless barley had 12 types. The results indicated the Qinghai-Tibet Plateau hulless barley had a polymorphism of the SGAPs. 2. The ranges of the total starch content, amylose content, Am/Ap, peak viscosity, pasting temperature and peak temperature of the 114 hulless barley were 51.26～66.70%,14.64～29.74%,0.17～0.42,194～1135BU,58.8～65.2 and 81.4℃～92.4, with an average of ℃59.82%, 23.60%, 0.31, 722.30BU, 62.1 and 88.8,℃℃ respectively. The distributions of the total starch content, amylose content, Am/Ap, peak viscosity, pasting temperature and peak temperature were visibly normal school. All of the amyloplasts in endosperm of varieties showed bimodal size distributions.The main starch properties of hulless barley from Tibet and Sichuan were separated and compared, the differences on amylose content and Am/Ap were obvious. 3. Eighteen accessions which had special starch properties were screened out. Five accessions with total starch content beyond 65%, including NB63-1, NB67, Ganzibailiuleng, 98221-1 and NB63; three accessions, Zangqing85, Zangqing3 and Ximala6, with the highest amylose content (>29%); five accessions with Am/Ap less than 0.25, including 99033-6, Chun Qingke, A Ba 330, Jan-03, Mi Mai114, 396, NB63-1 and 92013; seven accessions had a pasting temperature under 60, ℃meanwhile their peak viscosity beyond 1000BU and their peak temperature under 90℃，including Zu Cuochun, Jan-03, A Ba 330, Mi Mai 114, Chun Qingke, 20003 and A Qing 5. 4. There were high correlations between starch properties. Amylose content and Am/Ap were positively correlated to pasting temperature, negatively correlated to peak viscosity, negatively correlated to the number and granule size of A-type granule. Different SGAP combinations caused significant diversities in starch content and pasting properties. SGAP2, SGAP5, SGAP6 and SGAP7 may have positive effect on amylose content, Am/Ap and pasting temperature; SGAP3, SGAP9∼SGAP20 may have positive effect on peak viscosity. Our research made a comprehensive evaluation on the hulless barley starch from the Qinghai-Tibet Plateau, we can get a systemic understanding. Some special accessions were screened out can be used on the hulless barley breeding lines and industries utilization.The combination of the SGAPs may become a criterion to evaluate the hulless barley endosperm starch quality. Consequently, the results will be good information for further studies on the hulless barley.

Investigation on the microstructure and mechanical properties of a cast Mg–6Zn–5Al–4RE alloy

Mg-6Zn-5Al-4RE (RE = Mischmetal, mass%) alloy was prepared by metal mould casting method. The microstructure and mechanical properties of the as-cast and heat-treated alloys were investigated

Effects of rare earth on the structure and properties of Mg–6Zn–5Al–4Gd–1RE (RE = Ce or Y) alloys

The microstructures and mechanical properties of Mg-6Zn-5Al-4Gd-1RE (RE = Ce or Y) alloys were investigated. The addition of Ce or Y obviously refines the grain size for the Mg-6Zn-5Al-4Gd-based alloy, while the Y element has a better refining effect. The Ce and Y show different grain-refining mechanisms: Ce addition mostly promotes the growth of secondary dendrite, while Y addition mainly increases the heterogeneous nucleation sites.

The influence of mischmetal and tin on the microstructure and mechanical properties of Mg-6Zn-5Al-based alloys

The influence of the addition of mischmetal (MM) and tin (Sn) (total content of mischmetal and tin = 4 wt.%) on the microstructure, aging behavior and mechanical properties of Mg-6Zn-5Al-based alloys has been investigated. The microstructure of the as-cast alloys consists of alpha-Mg. Mg-32(Al,Zn)(49), Al2Mg5Zn2, Mg2Sn and Al2MMZn2 phases, and the morphology of these intermetallic phases varies with different MM and Sri additions.

Microstructures and mechanical properties of as-cast Mg–5Al–0.4Mn–xNd (x=0, 1, 2 and 4) alloys

Mg-5Al-0.4Mn-xNd (x=0, 1, 2 and 4wt.%) alloys were prepared by metal mould casting method. The microstructures and mechanical properties were investigated. The results demonstrated that Al11Nd3 phase was formed and mainly aggregated along the grain boundaries with the addition of Nd. Meanwhile, the grain sizes were greatly reduced with the increasing Nd content.

Effect of Nd on the microstructure, mechanical properties and corrosion behavior of die-cast Mg-4Al-based alloy

Die-cast Mg-4Al-0.4Mn-xNd(x = 0, 1, 2, 4 and 6 wt.%) magnesium alloys were prepared successfully and influences of Nd on the microstructure, mechanical properties and corrosion behavior of the Mg-4Al-0.4Mn alloy have been investigated. The results showed that with the addition of Nd binary Al2Nd phase and Al11Nd3 phase. which mainly aggregated along the grain boundaries, were formed, and the relative ratio of above two phases was in correlation with the Nd content in the alloy. Meanwhile, the grain sizes were greatly reduced with the increasing Nd content. It was found that due to the addition of Nd both the tensile properties and corrosion resistance were improved substantially.

Effect of Y for enhanced age hardening response and mechanical properties of Mg-Ho-Y-Zr alloys

In this study, compositional dependence of age hardening characteristics and tensile properties were investigated for Mg-4Ho-xY-0.6Zr alloys (x = 0, 3 5, and 7 wt%). The result showed that with increasing Y content, the hardness of the alloys increased in the as-quenched and aged-peak conditions. Considerable age hardening response was recognized for the alloys. When the alloy containing 7% Y showed the most remarkable age hardening response at aging temperature of 250 degrees C.

Microstructure and mechanical properties of Mg-4Al-4Nd-0.5Zn-0.3Mn alloy

Mg-4Al-4Nd-0.5Zn-0.3Mn alloy was prepared by metal mould casting method. Microstructure, aging behavior, mechanical properties and fracture morphology of the alloy were investigated. The results showed that alpha-Mg, Al-11 Nd-3, Al2Nd and Mg-32(Al,Zn)(49) phases were the main phases of the as-cast alloy. And the long rod-like Al-11 Nd-3 phase was decomposed to granular Al2Nd through T6 heat treatment. The tensile strength was also enhanced by T6 treatment. The yield strength was increased by 17% and 21% at RT and 150 degrees C, respectively. It was mainly because that the precipitates were refined through T6 treatment and this became more benefit to hinder dislocations slipping.