A new type of boundary integral-equation for plane problems of elasticity including rotational forces

Based on the idea proposed by Hu [Scientia Sinica Series A XXX, 385-390 (1987)], a new type of boundary integral equation for plane problems of elasticity including rotational forces is derived and its boundary element formulation is presented. Numerical results for a rotating hollow disk are given to demonstrate the accuracy of the new type of boundary integral equation.

On dilatational plastic constitutive equation of ductile materials and plastic loading paths at bifurcation

The dilatational plastic constitutive equation presented in this paper is proved to be in a form of generality. Based on this equation, the constitutive behaviour of materials at the moment of bifurcation is demonstrated to follow a loading path with the response as "soft" as possible.

Evolution and propagation of density waves on galactic disk .1. General evolution equation of wavelet and discussion of its solution

This paper presents a general self-consistent theory of evolution and propagation of wavelets on the galactic disk. A simplified model for this theory, i. e. the thin transition-layer approximation is proposed.There are three types of solutions to the basic equation governing the evolution of wavelets on the disk: (ⅰ) normal propagating type; (ⅱ) swing type; (ⅲ) general evolving type. The results show that the first two types are applicable to a certain domain on the galactic disk and a certain region of the wave number of wavelets. The third is needed to join the other two types and to yield a coherent total picture of the wave motion. From the present theory, it can be seen that the well-known "swing theory" of the G-L sheet model holds only for a certain class of basic states of galaxies.

The wave model of mesothermal plasma near wakes and Korteweg-de Vries equation

The stationary two-dimensional (x, z) near wakes behind a flat-based projectile which moves at a constant mesothermal speed (V∞) along a z-axis in a rarefied, fully ionized, plasma is studied using the wave model previously proposed by one of the authors (VCL). One-fluid theory is used to depict the free expansion of ambient plasma into the vacuum produced behind a fast-moving projectile. This nonstationary, one-dimensional (x, t) flow which is approximated by the K-dV equation can be transformed, through substitution, t=z/V∞, into a stationary two-dimensional (x, z) near wake flow seen by an observer moving with the body velocity (V∞). The initial value problem of the K-dV equation in (x, t) variables is solved by a specially devised numerical method. Comparisons of the present numerical solution for the asymptotically small and large times with available analytical solutions are made and found in satisfactory agreements.

关于Young-Laplace公式的吉布斯自由能证明

对于为论证球形液滴附加压强的Young-Laplace公式而设计的一个理想实验,有文献试图借助吉布斯自由能函数进行证明,本文给出符合这一条件的证明方法.

Starting Nozzle Flow Simulation Using K-G Two-Equation Turbulence Model

The starting process of two-dimensional nozzle flows has been simulated with Euler, laminar and k - g two-equation turbulence Navier-Stokes equations. The flow solver is based on a combination of LUSGS subiteration implicit method and five spatial discretized schemes, which are Roe, HLLE, MHLLE upwind schemes and AUSM+, AUSMPW schemes. In the paper, special attention is for the flow differences of the nozzle starting process obtained from different governing equations and different schemes. Two nozzle flows, previously investigated experimentally and numerically by other researchers, are chosen as our examples. The calculated results indicate the carbuncle phenomenon and unphysical oscillations appear more or less near a wall or behind strong shock wave except using HLLE scheme, and these unphysical phenomena become more seriously with the increase of Mach number. Comparing the turbulence calculation, inviscid solution cannot simulate the wall flow separation and the laminar solution shows some different flow characteristics in the regions of flow separation and near wall.

A Semi-Empirical Equation of Penetration Depth on Concrete Target Impacted by Ogive-Nose Projectiles

In this paper, the penetration process of ogive-nose projectiles into the semi-infinite concrete target is investigated by the dimensional analysis method and FEM simulation. With the dimensional analysis, main non-dimensional parameters which control the penetration depth are obtained with some reasonable hypothesis. Then, a new semi-empirical equation is present based on the original work of Forrestal et al., has only two non-dimensional combined variables with definite physical meanings. To verify this equation, prediction results are compared with experiments in a wide variation region of velocity. Then, a commercial FEM code, LS-DYNA, is used to simulate the complex penetration process, that also show the novel semi-empirical equation is reasonable for determining the penetration depth in a concrete target.

Modified Simplified Rate Equation Model of Flowing Chemical Oxygen-Iodine Laser and its Application

A modified simplified rate equation (RE) model of flowing chemical oxygen-iodine laser (COIL), which is adapted to both the condition of homogeneous broadening and inhomogeneous broadening being of importance and the condition of inhomogeneous broadening being predominant, is presented for performance analyses of a COIL. By using the Voigt profile function and the gain-equal-loss approximation, a gain expression has been deduced from the rate equations of upper and lower level laser species. This gain expression is adapted to the conditions of very low gas pressure up to quite high pressure and can deal with the condition of lasing frequency being not equal to the central one of spectral profile. The expressions of output power and extraction efficiency in a flowing COIL can be obtained by solving the coupling equations of the deduced gain expression and the energy equation which expresses the complete transformation of the energy stored in singlet delta state oxygen into laser energy. By using these expressions, the RotoCOIL experiment is simulated, and obtained results agree well with experiment data. Effects of various adjustable parameters on the performances of COIL are also presented.

Numerical-Value Perturbation Method with Application of Solving Convective-Diffusion Integral Equation

The convective--diffusion equation is of primary importance in such fields as fluid dynamics and heat transfer hi the numerical methods solving the convective-diffusion equation, the finite volume method can use conveniently diversified grids (structured and unstructured grids) and is suitable for very complex geometry The disadvantage of FV methods compared to the finite difference method is that FV-methods of order higher than second are more difficult to develop in three-dimensional cases. The second-order central scheme (2cs) offers a good compromise among accuracy, simplicity and efficiency, however, it will produce oscillatory solutions when the grid Reynolds numbers are large and then very fine grids are required to obtain accurate solution. The simplest first-order upwind (IUW) scheme satisfies the convective boundedness criteria, however. Its numerical diffusion is large. The power-law scheme, QMCK and second-order upwind (2UW) schemes are also often used in some commercial codes. Their numerical accurate are roughly consistent with that of ZCS. Therefore, it is meaningful to offer higher-accurate three point FV scheme. In this paper, the numerical-value perturbational method suggested by Zhi Gao is used to develop an upwind and mixed FV scheme using any higher-order interpolation and second-order integration approximations, which is called perturbational finite volume (PFV) scheme. The PFV scheme uses the least nodes similar to the standard three-point schemes, namely, the number of the nodes needed equals to unity plus the face-number of the control volume. For instanc6, in the two-dimensional (2-D) case, only four nodes for the triangle grids and five nodes for the Cartesian grids are utilized, respectively. The PFV scheme is applied on a number of 1-D problems, 2~Dand 3-D flow model equations. Comparing with other standard three-point schemes, The PFV scheme has much smaller numerical diffusion than the first-order upwind (IUW) scheme, its numerical accuracy are also higher than the second-order central scheme (2CS), the power-law scheme (PLS), the QUICK scheme and the second-order upwind(ZUW) scheme.

粘弹性材料界面裂纹的瞬态响应和散射研究

本文研究粘弹性材料界面裂纹对冲击载荷的瞬态响应和对广义平面波的稳态散射。相对于已有广泛研究的弹性材料裂纹瞬态响应和稳态散射问题，本文的研究有三个突出特点：1）粘弹性材料；2）界面裂纹；3）广义平面波入射。粘弹性材料界面裂纹对冲击载荷的瞬态响应和对广义平面波的散射尚无开展研究，本文在弹性材料相应问题的研究基础上，首先开展了这一问题的研究。对于冲击载荷下粘弹性界面裂纹的瞬态响应问题，利用Laplace积分变换方法，将粘弹性材料卷积型本构方程转化为Laplace变换域内的代数型本构方程，从而可以在Laplace变换域内象处理弹性材料的冲击响应一样，将相应的混合边值问题归结为关于裂纹张开位移COD的对偶积分方程，并进一步引入裂纹位错密度函数CDD （Crack Dislocation Density），将对偶积分方程化成关于CDD的奇异积分方程（SIE）。用数值方法求解奇异积分方程得到变换域内的动应力强度因子数值解，最后利用Laplace积分逆变换数值方法得到时间域内的动应力强度因子的时间响应。理论分析考虑了两种裂纹模型，即Griffith界面裂纹和柱面圆弧型界面裂纹。考虑的载荷包括反平面冲击载荷和平面冲击载荷。对于平面冲击载荷，通过对裂尖应力场的奇性分析，首次发现粘弹性界面裂纹裂尖动应力场奇性指数不是常数0.5，而是与震荡指数一样依赖材料参数。针对反平面冲击载荷给出了一个算例，计算了裂尖动应力强度因子的时间响应，并与弹性材料的结果作了比较，发现粘弹性效应的影响不仅使过冲击峰值降低，而且使峰值点后移。粘性效应较大时，过冲击现象甚至不出现。关于粘弹性界面裂纹对广东省义平面波的散射问题，首先研究广义平面波在无裂纹存在的理想界面的反射和透射，再研究由于界面裂纹的存在而产生的附加散射场。利用粘弹性材料的复模量理论，可将粘弹性材料的卷积型相构方程化成频率域内的代数型本构方程。类似弹性平面波的处理，在频率域内将问题最终归结为关于裂纹位错密度CDD的奇异积分方程。数值方法求解奇异积分方程即可得到频率域内的散射场，并进而得到裂尖动应力强度因子和远场位移型函数和散射截面。理论分析考虑了两种裂纹模型：Griffith界面裂纹和柱面圆弧型界面裂纹。研究的入射波有广义的SH波和P波。对于广义平面P波入射的情况，通过对裂尖应力场的奇性分析，同样发现粘弹性界面裂纹裂尖动应力场奇性指数不地常数0.5，而是与震荡指数一样依赖于材料参数。对柱面裂纹散射远场的渐近分析，发现远场位移和应力除含有几何衰减因子外，都含有一个材料衰减速因子。散射截面由于材料衰减因子的存在也成为依赖散射半径的量。为了使散射截面仍有意义，文中提出一种修正办法。对Griffith界面裂纹，给出了一个广义平面SH波入射的算例；对柱面界面裂纹，给出了一个广义平面P波入射的算例。计算了不同入射角和入射频率下裂纹的张开位移和动就应力强度因子，并分析了其依赖关系。求解奇异积分方程的数值方法和Laplace积分逆变换数值方法是本文的基本数值方法。本文对这两种方法作了大量的调研和系统的研究。在对比分析的基础上，对现有的各种方法从原理，适用范围，计数效率，优势及特点进行了归纳总结。并尝试了奇异积分方程的最新数值方法--分片连续函数法，证实了其适用性和方便性．

New doubly periodic waves of the (2+1)-dimensional double sine-Gordon equation

New exact solutions of the (2 + 1)-dimensional double sine-Gordon equation are studied by introducing the modified mapping relations between the cubic nonlinear Klein-Gordon system and double sine-Gordon equation. Two arbitrary functions are included into the Jacobi elliptic function solutions. New doubly periodic wave solutions are obtained and displayed graphically by proper selections of the arbitrary functions.

Investigation of gain recovery for InAs/GaAs quantum dot semiconductor optical amplifiers by rate equation simulation

The gain recoveries in quantum dot semiconductor optical amplifiers (QD SOAs) are numerically studied by rate equation simulation. Similar to the optical pump-probe experiment, the injection of double 150 fs optical pulses is used to simulate the gain recovery of a weak continuous signal under different injection levels, inhomogeneous broadenings, detuning wavelengths, and pulse signal energies for the QD SOAs. The obtained gain recoveries are then fitted by a response function with multiple exponential terms to determine the response times. The gain recovery can be described by three exponential terms with the time constants, which can be explained as carrier relaxation from the excited state to the ground state, carrier captured by the excited state from the wetting layer, and the supply of the wetting layer carriers. The fitted lifetimes decrease with the increase of the injection currents under gain unsaturation, slightly decrease with the decrease of inhomogeneous broadening of QDs, and increase with the increase of detuning wavelength between continuous signal and pulse signal and the increase of the pulse energy.