Investigation of Interactions between Two Monoclonal Antibodies and SARS Virus with a Label-Free Protein Array

The investigation of interactions between two kinds of monoclonal antibodies and SARS virus with a label-free protein array technique were presented in this paper. The performance consists of three parts: a surface modification for ligand immobilization/surface, a protein array fabrication with an integrated microfluidic system for patterning, packaging and liquid handling, and a protein array reader of imaging ellipsometer. This revealed the technique could be used as an immunoassay for qualitative and quantitative detection as wen as kinetic analysis of biomolecule interaction.

带电悬浮粒子胶体晶体的固定化

采用光固化技术, 以丙烯酰胺单体与亚甲基双丙烯酰胺交联剂在紫外光的照射下发生光聚合反应, 嵌入聚苯乙烯胶体晶体, 实现了胶体晶体的固定化. 结合反射光谱和Kossel衍射技术研究对照了固定化前后胶体晶体的变化, 实验结果表明, 通过这种水凝胶固定化的胶体晶体保存了未固定前悬浮液中胶体晶体的结构. 但固定化后的胶体晶体的晶面间距和晶体的尺寸都略微减小. 通过对固定化后的水凝胶长时间的反射光谱观测, 发现固定化后胶体晶体在Milli-Q水中起初会发生溶胀, 经过2-5天溶胀-消溶胀过程达到平衡, 平衡后的水凝胶胶体晶体十分稳定, 可以长时间保持胶体晶体的结构. 因此, 胶体晶体固定化不但极大地提高了悬浮液中胶体晶体的抗剪切能力, 还克服了悬浮液中胶体晶体对离子、外界干扰的敏感性, 扩大了胶体晶体的实际应用价值.

Phage M13Ko7 Detection With Biosensor Based On Imaging Ellipsometry And Afm Microscopic Confirmation

A rapid detection and identification of pathogens is important for minimizing transfer and spread of disease. A label-free and multiplex biosensor based on imaging ellipsometry (BIE) had been developed for the detection of phage M13KO7. The surface of silicon wafer is modified with aldehyde, and proteins can be patterned homogeneously and simultaneously on the surface of silicon wafer in an array format by a microfluidic system. Avidin is immobilized on the surface for biotin-anti-M13 immobilization by means of interaction between avidin and biotin, which will serve as ligand against phage M13KO7. Phages M13KO7 are specifically captured by the ligand when phage M13KO7 solution passes over the surface, resulting in a significant increase of mass surface concentration of the anti-M13 binding phage M13KO7 layer, which could be detected by imaging ellipsometry with a sensitivity of 10(9) pfu/ml. Moreover, atomic force microscopy is also used to confirm the fact that phage M13KO7 has been directly captured by ligands on the surface. It indicates that BIE is competent for direct detection of phage M13KO7 and has potential in the field of virus detection. (C) 2008 Elsevier B.V. All rights reserved.

Identification of novel semenogelin I-derived antimicrobial peptide from liquefied human seminal plasma

Semenogelin I (SgI) is one of the most abundant proteins in human seminal plasma. SgI plays a key role in sperm coagulation and spermatozoon immobilization. in addition, SgI and/or its proteolytic fragments are involved in regulating spermatozoon motility

SECRETORY MONOCLONAL IGA ANTIBODY TO HUMAN SPERM PRODUCED BY GASTROINTESTINAL IMMUNIZATION INHIBITS HUMAN SPERM ACTIVITY AND MOUSE INVITRO FERTILIZATION

BALB/c mice were immunized intragastrically with human sperm. Cells from the Peyer's patches and spleens of the immunized mice were for the preparation of hybridomas secreting antisperm monoclonal IgA (mcIgA). The specific ratio of IgA-secreting cells in Peyer's patches was much higher than that in spleen. The binding site on human sperm of 9 of 19 mcIgA was in the post-acrosomal region using an immunofluorescent assay. Two of eight selected mcIgA caused strong human sperm agglutination and three of them produced significant inhibition of mouse in vitro fertilization. No mcIgA tested caused obvious human sperm immobilization or inhibited mouse in vivo fertilization. In vitro assembly of selected mcIgA in ascites with mouse secretory component (SC) caused no significant changes in effects on sperm function and in vitro fertilization. By use of Western blotting, dimer or higher polymers were demonstrated in all selected mcIgAs and corresponding protein antigens in 6 of 8 selected mcIgAs. These results suggest that human sperm function may be inhibited and fertilization rate reduced by specific secretory IgA to human sperm and that secretory immunity to protein antigens of human sperm could be induced by intragastrointestinal immunization.

Preparation of pH-sensitive polymer by thermal initiation polymerization and its application in fluorescence immunoassay

A fluorescence immunoassay for human IgG (Ag) was developed using a pH-sensitive polymer prepared by thermal initiation or redox initiation polymerization as a carrier. In the competitive immunoassay, appropriate quantity of Ag was immobilized on the polymer and the standard Ag (or sample) solution, and a constant amount of fluorescein isothiocyanate labeled goat anti-human IgG antibody (Ab-FITC) was added. Immobilized Ag and the standard (or sample) Ag competed for binding to the Ab-FITC in 37 C in homogeneous format. After changing the pH to separate the polymer-immune complex precipitate, it was re-dissolved and determined by fluorescence method. The results showed that the immobilization efficiency, immunological reaction activities of immobilized Au and phase transition pH range were improved as Ag was immobilized by thermal initiation instead of redox initiation polymerization. Under optimum conditions, the calibration graphs for the Ag in both methods, thermal initiation and redox initiation, were linear over the concentration range of 0.0-1000 ng mL(-1), with detection limits 8 (thermal initiation) and 12 ng mL(1) (redox initiation), respectively. Moreover, some pH-sensitive polymer prepared only in organic solvent or under high temperature could also be used as an immunoreaction carrier by thermal initiation polymerization. Thermal initiation polymerization was a better immobilization mode. (C) 2004 Elsevier B.V. All rights reserved.

Enhanced photoresponse from the ordered microstructure of naphthalocyanine-carbon nanotube composite film

Naphthalocyanine-sensitized multi-walled carbon nanotube (NaPc-MWNT) composites have been synthesized through the pi-stacking between naphthalocyanine (NaPc) and carbon nanotubes. The resultant nanocomposites were characterized with a scanning electron microscope (SEM), a transmission electron microscope (TEM), and by UV - vis absorption and photocurrent spectra. The long-range ordering was observed in the NaPc - MWNT composites by using a TEM. The enhancement in the absorption intensity and the broadening of the absorption wavelength observed in the composite films, which were due to the attachment of NaPc on the MWNT surface, is discussed based on the measured UV - vis absorption spectra. Furthermore, the photoconductivity of the poly( 3-hexylthiophene)(PAT6) - NaPc - MWNT composite film was found to increase remarkably in the visible region and broaden towards the red regions. These new phenomena were ascribed to the larger donor/acceptor (D/A) interface and the formation of a biconsecutive D/A network structure, as discussed in consideration of the photoinduced charge transfer between PAT6 and NaPc - MWNT.

Conversion of Soybean oil to Biodiesel Fuel with Immobilized Candida Lipase on Textile Cloth

The characteristic of biodiesel fuel production from transesterification of soybean oil is studied. The reactant solution is the mixture of soybean oil, methanol, and solvent. A new lipase immobilization method, textile cloth immobilization, was developed in this study. Immobilized Candida lipase sp. 99-125 was applied as the enzyme catalyst. The effect of flow rate of reaction liquid, solvents, reaction time, and water content on the biodiesel yield is investigated. Products analysis shows that the main components in biodiesel are methyl sterate, methyl hexadecanoate, methyl oleate, methyl linoleate, and methyl linolenate. The test results indicate that the maximum yield of biodiesel of 92% was obtained at the conditions of hexane being the solvent, water content being 20 wt%, and reaction time being 24 h.

Establishment and characterization of dual-species biofilms formed between a 3,5-dinitrobenzoic-degrading strain and bacteria with high biofilm-forming capabilities

In this study, the possibility of establishing a dual-species biofilm from a bacterium with a high biofilm-forming capability and a 3,5-dinitrobenzoic acid (3,5-DNBA)-degrading bacterium, Comamonas testosteroni A3, was investigated. Our results showed that the combinations of strain A3 with each of five strains with a high biofilm-forming capability (Pseudomonas sp. M8, Pseudomonas putida M9, Bacillus cereus M19, Pseudomonas plecoglossicida M21 and Aeromonas hydrophila M22) presented different levels of enhancement regarding biofilm-forming capability. Among these culture combinations, the 24-h dual-species biofilms established by C. testosteroni A3 with P. putida M9 and A. hydrophila M22 showed the strongest resistance to 3,5-DNBA shock loading, as demonstrated by six successive replacements with DMM2 synthetic wastewater. The degradation rates of 3,5-DNBA by these two culture combinations reached 63.3-91.6% and 70.7-89.4%, respectively, within 6 h of every replacement. Using the gfp-tagged strain M22 and confocal laser scanning microscopy, the immobilization of A3 cells in the dual-species biofilm was confirmed. We thus demonstrated that, during wastewater treatment processes, it is possible to immobilize degrader bacteria with bacteria with a high biofilm-forming capability and to enable them to develop into the mixed microbial flora. This may be a simple and economical method that represents a novel strategy for effective bioaugmentation.

Low potential detection of glutamate based on the electrocatalytic oxidation of NADH at thionine/single-walled carbon nanotubes composite modified electrode

A glutamate biosensor based on the electrocatalytic oxidation of reduced nicotinamide adenine dinucleotide (NADH), which was generated by the enzymatic reaction, was developed via employing a single-walled carbon nanotubes/thionine (Th-SWNTs) nanocomposite as a mediator and an enzyme immobilization matrix. The biosensor, which was fabricated by immobilizing glutamate dehydrogenase (GIDH) on the surface of Th-SWNTs, exhibited a rapid response (ca. 5 s), a low detection limit (0.1 mu M), a wide and useful linear range (0.5-400 mu M), high sensitivity (137.3 +/- 15.7) mu A mM(-1) cm(-2), higher biological affinity, as well as good stability and repeatability. In addition, the common interfering species, such as ascorbic acid, uric acid, and 4-acetamidophenol, did not cause any interference due to the use of a low operating potential (190 mV vs. NHE). The biosensor can be used to quantify the concentration of glutamate in the physiological level. The Th-SWNTs system represents a simple and effective approach to the integration of dehydrogenase and electrodes, which can provide analytical access to a large group of enzymes for wide range of bioelectrochemical applications including biosensors and biofuel cells.

Surface Initiated Polymerization from Substrates of Low Initiator Density and Its Applications in Biosensors

Surface initiated polymerization (SIP) has become an attractive method for tailoring physical and chemical properties of surfaces for a broad range of applications. Most of those application relied on the merit of a high density coating. In this study we explored a long overlooked field of SIP. SIP from substrates of low initiator density. We combined ellipsometry with AFM to investigate the effect of initiatior density and polymerization time on the morphology of polymer coatings. In addition, we carefully adjusted the nanoscale separation of polymer chains to achieve a balance between nonfouling and immobilization capacities. We further tested the performance of those coating on various biosensors, such as quartz crystal microbalance, surface plasmon resonance, and protein microarrays. The optimized matrices enhanced the performance of those biosensors. This report shall encourage researches to explore new frontiers in SIP that go beyond polymer brushes.

中药蜘蛛香的化学成分研究及以羧甲基魔芋葡苷聚糖-壳聚糖为细胞膜的天冬酰胺酶人工细胞研究

本论文由三章组成。第一章介绍了中药蜘蛛香的化学成分的研究成果，第二章为羧甲基魔芋葡苷聚糖-壳聚糖为细胞膜的天冬酰胺酶人工细胞的研究，第三章综述了人工细胞在生物医学领域的应用。 第一章报道了中药蜘蛛香（Valeriana wallichii）根部乙醇提取物的化学成分，采用正、反相硅胶层析等分离方法和MS、NMR等多种波谱手段，从中共分离鉴定出17个化合物，分别为缬草素(valtrate，1)，valechlorine（2），homobadrinal（3），baldrinal（4），乙酰缬草素(acevaltrate 5)，valeriotetrate C（6），valeriotetrate B（7），对羟基苯乙酮(4'-hydroxy-acetophenone 8)，7-hydroxy valtrate（9），8-methylvalepotriate（10），1,5-dihydroxy-3,8-epoxyvalechlorine A（11），二氢缬草素(didrovaltrate 12)，胡萝卜苷（13），橙皮苷 (hesperidin 14)，prinsepiol-4-O-β-D-glucopyranoside（15），longiflorone（16），乙基糖苷（17）。其中化合物6、7、10、和11为新化合物，化合物9、15、16为首次从该植物中得到。新化合物11为含有氯原子的刚性骨架环烯醚萜，并且确定了其绝对构型。 第二章报道了以羧甲基魔芋葡苷聚糖（CKGM）和壳聚糖（CS）为膜的固定化L-天冬酰胺酶人工细胞研究成果。利用羧甲基魔芋葡苷聚糖和壳聚糖两种生物相容性很好的天然多糖之间的静电吸引力，在非常温和的条件下制备成具有半透过性膜的人工细胞，将治疗儿童急性成淋巴细胞性白血病(ALL)的药物L-天冬酰胺酶包裹在内。通过考察温度和pH对人工细胞的影响,结果表明以CKGM- CS为膜的L-天冬酰胺酶人工细胞对温度和pH的稳定性和耐受性均高于自由酶，说明CKGM-CS对酶具有保护作用，而且小分子底物和产物可以自由进出膜内外，而包裹在膜内的生物大分子则不能泄露出来。 第三章综述了微囊化人工细胞的研究进展。 This dissertation consists of three parts. In the first part, the chemical constituents from the root of Valeriana wallichii were reported. In the second part, preparation and characteristics of L-Asparaginase Artificial cell were reported. The third part is a review on progress of microcapsule artificial cell. The first chapter is about the isolation and identification of the chemical constituents from the root of V. wallichii. Seventeen compounds were isolated from the ethanol extract of roots of V. wallichii through repeated column chromatography on normal and reversed phase silica gel. By the spectroscopic and chemical evidence, their structures were elucidated as valtrate (1), valechlorine (2), homobadrinal (3), baldrinal (4), acevaltrate (5), valeriotetrate C (6), valeriotetrate B (7), 4'-hydroxy-acetophenone (8), 7-hydroxy valtrate (9), 8-methylvalepotriate (10), 1,5-dihydroxy-3,8-epoxyvalechlorine A (11), didrovaltrate (12), daucosterol (13), hesperidin (14), prinsepiol-4-O-β-D-glucopyranoside (15), longiflorone (16), and ethyl glucoside (17). Among them, 6, 7, 10, and 11 are new compounds. 15, 16 and 9 were isolated from this plant for the first time. The absolute configuration of compound 11, an unusual iridoid bearing a C-10 chlor-group and an oxo-bridge connecting C-3 and C-8 resulting in a rigid skeleton, was confirmed. The second chapter is about the semi-permeable microcapsule of carboxymethyl konjac glucomannan-chitosan for L-asparaginase immobilization. Carboxymethyl konjac glucomannan-chitosan (CKGM-CS) microcapsules, which have good biocompatibility, prepared under very mild conditions via polyelectrostatic complexation, were used for immobilize L-asparaginase-a kind of drug for acute lymphoblastic leukemia (ALL). The activity and stability under different temperature and pH of the enzyme loaded-microcapsules were studied. The results indicated the immobilized enzyme has better stability and activity contrasting to the native enzyme. The study illustrates that the L-asparaginase could be protected in CKGM-CS microcapsules, the substrate and product could pass through the system freely.

微生物酶法拆分消旋芳香族氨基酸的研究

通过单因子和多因子摇瓶正交试验，确定了米曲霉液态发酵产氨基酰化酶的最佳发酵条件。优化发酵培养基组成（ρ/g L-1）： 葡萄糖40,蔗糖10,可溶性淀粉20,蛋白胨2.5,马铃薯液1 000mL, pH自然。培养基装量50mL/250mL三角瓶，接种量4%。培养温度30℃，转速100 rmin-1，发酵时间42h。每50mL培养物的总酶活由优化前的2627U提高到7338U，是优化前的2.79倍。 研究了米曲霉氨基酰化酶的部分酶学性质，该酶催化反应的最适pH为7.0，最适温度为40℃，低浓度的Co2+（5×10-4mol/L）对酶活激活作用显著，催化反应过程中，底物浓度大于0.2 mol/L时，存在高浓度底物抑制酶活力现象。 初步探索了包埋法固定化米曲霉氨基酰化酶的载体，在实验的五种载体中，以海藻酸钠为载体包埋固定化米曲霉氨基酰化酶酶活保留率高，且操作简单，成本低廉。对包埋法固定化米曲霉氨基酰化酶酶学性质进行了研究，较游离米曲霉氨基酰化酶，最适温度未发生改变，最适pH向碱性范围偏移至8.0，对酸碱和热的稳定性增强，最适底物浓度增大到0.4 mol/L。 根据氨基酰化酶能立体专一水解L-氨基酰化物的特点，利用米曲霉氨基酰化酶对消旋苯丙氨酸进行了拆分。在米曲霉氨基酰化酶选择性的作用于底物N-乙酰-L-苯丙氨酸，得到L-苯丙氨酸后，通过732阳离子树脂和结晶法分别将L-苯丙氨酸和N-乙酰-D-苯丙氨酸分离，N-乙酰-D-苯丙氨酸通过酸水解脱去乙酰基得到D-苯丙氨酸，拆分得到光学纯度为98%的L-苯丙氨酸（收率84.8%）和光学纯度为92.3%的D-苯丙氨酸（收率89.5%）。 separate factors tests and orthogonal experiments,the optimum fermentation conditions of aminoacylase –producing Aspergillus oryzae were determined, as follows（ρ/g L-1）,glucose 40,sucrose 10,soluble starch 20,peptone 2.5，potato juice 1000ml, inoculation volume 4%and fermentation temperature 30℃,rotation speed 100rmin-1.The highest total enzyme activity ,7338μ,was obtained after fermentation for 42 h, increased by 279% compared with the original value of 2627μbefore optimization. We dicussed partial characteristics of aminoacylase. The optimal pH and temperature of aminoacylase were 7.0 and 40℃ respectively. Low- concentration Co2+ (5×10-4mol/L）activated the aminoacylase remarkably while high-concentration substrate lowered the aminoacylase . Five vectors has been used for immobolizing the enzyme and calcium alginate showed to be the best one for it had the slightest influence on the enzyme activity, easy to operate ,and low in price, comparing with other fours. The enzymatic charateristic study showed that its optimum temperature didn’t change, but the optimum pH and substrat concentration were higher after immobilization. The stability of immobolized enzyme to acid, alkaline and heat rised as well. The aminoacylse from Aspergillus oryzae was used to resolute racemic phenylalanine to obtain D-phenylalanine. After catalyzing process, we took two methods to separate D-phenylalanine .In end,L-phenylalanine was obtained with 98% optical purity in 84.8% yield, D-phenylalanine was obtained with 92.3% optical purity in 89.5% yield.

固定化红酵母细胞合成L-苯丙氨酸研究

In this paper, bioconversion of trans-cinnamic acid(t-Ca)to L-phenylalanine (L-phe) has been investigated by using immobilized yeast cells with induced L-phe Ammonia-lyase(PAL, EC.4.3.1.5) as biocatalysts. The contents are the following. (1) Thirty strains of yeasts, including two genera (Rhodotorula, Sporobolomyces), six species (R. glutinis R. minuta,R.rubra,R.sineses,R.roseus and S.salmonicolor)were screened for their ability to converse the substrates, t-Ca and ammonia, to the product, L-phe, by using yeast cells as biocatalyst, and primary evaluation for PAL activity of the selected strains was investigated. From the results of the screening experiments, it was found that 22 strains were able to produce L-phe from t-Ca with the range of conversion yield from 2% to 67%. Studies on PAL formation time course during cultivation show that the maximum PAL activity of several different strains ranges from 2.3 to 14.4×10-3U/mg cell dry weight. The biomass of tested strains at their maximum enzyme activity is also greatly varied. (2)One of the selected strains, R. rubra as 2.166, was used for immobilized cells as biocatalysts to produce L-phe. The optimum conversion conditions and effective stablization agents were investigated. The results shown that polyacrylamide gel was chosen as a suitable matrix for immobilization of the yeast cells, and it can retain 88% of the PAL activity in the reverse direction at the following reactive conditions: [t-Ca]: 34mM. [NH4OH]: 6.OM.PH10.00, temperature: 30℃. (3) The effects of various kinds of effectors on the production of L-phe were also examined. Membrane permeabilizing agents can stimulate L-phe synthesis, but make the stability of PAL decline greatly. Polyalchoholic agents and glutamic acid were very effective for the stabilization of PAL. At the presence of glutamic acid (5%), the half life of L-phe productivity with the immobilized cells was extended to 192 hours, which was much higher than most of that having been reproted, while the half life of resting cells was only about 15 hours. (4) Use of initial velocity studies on the kinetics of enzyme-catalized reaction indicated that the apparent Km value was 13.0mM for the immobilized cells, and 4.8mM for the resting cells. Thermostability of the immobilized cells was better than the resting cells. Fluid bed bioreactor is more effective than batch bioreator in prolonging the thermostability of the biocatalysts. (5) CGA- 688 resin column chromatographic procedure was employed in the isolation and purification of L-phe, t-Ca and other substances from the reactire mixture. (6) Preparative-scale production of L-phe on a level of gram amount by immobilized cells from the culture broth of R. rubra AS2.166 allowed for the conversion yield with 30%. The characteristic physico-chemical criteria (including melting point, optical activity, elements analysis, IR, NMR) are the same with the standard L-phe. 本文报告了利用诱导的苯丙氨酸解氨酶 (PAL.EC.4.3.1.5)催化反式肉桂酸(t-Ca)氨加 成制备L-苯丙氨酸(L-phe)的研究，主要内容为：(1) 我们搜集了三十株酵母菌株，利用全细胞转化t-Ca生成L-phe的能力进行了直 接筛选，并对其PAL活性水平进行了初步评估研究。研究结果表明，其中22株酵母具有转化t-Ca生产L-phe的能力，它们包括 Rhodotorula glutinis,R.rubra, R.sineses 和Sporobolomyces roseus 的菌株，转化率在2-67%。细胞生长和PAL形成过程的研究 表明，不同菌株PAL最大活力在2.3-14.4×10-3U/mg 细胞干重，达到最大PAL活性时各株酵母的生长情况也极不一致。(2) 利用筛 选出的一株深红酵母R.rubra AS2.166 作为供试菌株，研究了细胞固定化条件下生物转化的最适条件及PAL在固定化条件下的稳定 性。结果表明以聚丙烯酰胺凝胶包埋法较为理想，能使细胞合成L-phe活力保持88%，最适t-Ca浓度为34mM，最适NH4OH浓度为6M,最 适PH10.0，最适温度45℃。(3) 多种效应物对L-phe 合成的影响研究表明：表面活性剂能刺激L-phe的合成，但使PAL稳定性下降。 多羟基化合物及Glu对PAL的稳定十分有效在有Glu存在下，能使固定化细胞合成L-phe的半寿期达192小时左右，高于大部分现已报 导的固定化结果。(4) 用初速度法研究了深红酵母AS2.166中PAL的酶促反应特征，测得固定化细胞对t-Ca的表观米氏常数Km为 13.0mM，全细胞为4.8mM，细胞固定后热稳定性提高。(5) 建立了适合低浓度分离纯化产物与底物的聚苯乙烯大孔树脂柱层析技术 ，能使L-phe与t-Ca及产物混合物中其它成分有效分开。(6) 利用固定化的R.rubra AS2.166细胞所做的制备实验能够使L-phe的产 率达到30%左右，其主要的理化指标(包括熔点、比旋光度、元素分析、IR、NMR等)与标准L-phe一致。

Integrated lectin affinity microfluidic chip for glycoform separation

Lectin affinity chromatography was miniaturized into a microfluidic format, which results in improvement of performance, as compared to the conventional method. A lectin affinity monolith column was prepared in the microchannel of a microfluidic chip. The porous monolith was fabricated by UV-initiated polymerization of ethylene dimethacrylate (EDMA) and glycidyl methacrylate (GMA) in the presence of porogeneities, followed by immobilization of pisum sativum agglutinin (PSA) on the monolith matrix. Using electroosmosis as the driven force, lectin affinity chromatographies of three kinds of glycoprotein, turkey ovalbumin (TO), chicken ovalbumin (CO), and ovomucoid (OM), were carried out on the microfluidic system. All the glycoproteins were successfully separated into several fractions with different affinities toward the immobilized PSA. The integrated system reduces the time required for the lectin affinity chromatography reaction to similar to3%, thus, the overall analysis time from 4 h to 400 s. Only 300 pg of glycoprotein is required for the whole separation process. Moreover, troublesome operations for lectin affinity chromatography are simplified.