一氧化氮对人肝癌细胞SMMC-7721辐射敏感性的增强效应

目的:观察一氧化氮对肿瘤细胞SMMC-7721辐射敏感性的作用效果。方法:实验于2005-06/09在兰州大学生命科学学院和中科院近代物理研究辐射医学实验室进行。处于对数生长期的肝癌细胞SMMC-7721,在用X射线照射前4h,换入含有0.1mmol/L硝普钠(一氧化氮的前体)的培养液,与对照组(不加硝普钠)一起,在200cGy/min的剂量率下,分别照射0,1,2,4,6,8Gy,换为正常培养液培养。用集落形成法计算细胞的存活率,用吖啶橙/溴乙啶双染法检测细胞的死亡情况,用流式细胞仪检测细胞周期。结果:①存活曲线细胞存活率随照射剂量增加而减少,硝普钠组细胞的克隆形成率低于对照组(2Gy时,P<0.01)。②细胞死亡百分率(坏死细胞与凋亡细胞总数/总细胞数):与照射剂量呈正相关,硝普钠组高于对照组(P<0.05)。对照组从(9.95±3.53)%(0Gy)逐渐升至(58.74±3.46)%(6Gy),而硝普钠组则从(18.53±12.02)%(0Gy)迅速升至(61.57±9.53)%(2Gy)。③细胞周期检测结果:对照组细胞经过X射线照射后,出现了G2/M期阻滞[从0Gy时(12.50±5.76)%逐渐增加到8Gy(40.36±2.74)%],而硝普钠组细胞在低剂量时主要表现为G0/G1期阻滞[0Gy:(16.06±7.19)%;2Gy:(17.93±0.92)%],而G2/M期阻滞仅在高剂量时明显[8Gy时为(50.10±3.93)%,P<0.05]。结论:经硝普钠产生的一氧化氮,通过与X射线协同作用,减少了肝癌细胞SMMC-7721的细胞存活率,促进细胞死亡,阻止细胞被阻滞至G2/M期,是一种有效的辐射增敏剂。

长白山阔叶红松林昆虫多样性研究

通过季节性观察 ,系统地研究了长白山阔叶红松林昆虫类群及其多样性 .结果表明 ,长白山阔叶红松林已知的森林昆虫 2 6目 131科 116 2属 196 0种 ,其中森林害虫 11目 10 5科 881种、重要森林害虫6 38种 ;森林昆虫群落中植食性昆虫类群总数所占比重最大 ,天敌昆虫群落中以捕食性类群总数所占比重最大 .植食类群、寄生性类群和捕食类群全年的均匀度指数分别为 0 884、0 830和 0 80 6 .各类群间季节变动系数的大小顺序为捕食类群 >寄生性类群 >植食类群 .

低价林早期诊断:生态因子途径

提出了低价林早期诊断的新思路 ,即根据低价林的形成规律 ,在林分还未表现出低价林状况时就能诊断出其发展趋势 ,以便及时采取相应的经营管理措施 .以辽西油松林为例 ,从生态因子途径开展了低价林的早期诊断研究 ,建立了基于单因素实验和判别分析的生态因子途径早期诊断技术 .研究表明 ,土层厚度X1、有机质含量X2 、土壤全氮含量X3 、土壤含水率X4、土壤微生物总数量X5可选择作为油松低价林早期诊断的敏感指标 ;在综合诊断时引入了判别分析的数量分类方法 ,并根据判别分析的思路建立了油松林生长状况生态因子途径早期诊断方法 ,其步骤 :1)确定判别指标 ;2 )建立判别函数Y =1.5 96X1-0 .5 1X2 - 3.196X3 +1.6 2 2X4+1.898X5;3)通过判别函数和研究对象的各项判别指标值进行早期诊断 .低价林早期诊断的技术与方法尚有待进一步地研究、检验和完善 .

A strategy for synthesis of ion-bonded supramolecular star polymers by reversible addition-fragmentation chain transfer (RAFT) polymerization

We have developed a novel strategy for the preparation of ion-bonded supramolecular star polymers by RAFT polymerization. An ion-bonded star supramolecule with six functional groups was prepared from a triphenylene derivative containing tertiary amino groups and trithiocarbonate carboxylic acid, and used as the RAFT agent in polymerizations of tert-butyl acrylate (tBA) and styrene (St). Molecular weights and structures of the polymers were characterized by H-1 NMR and GPC. The results show that the polymerization possesses the character of living free-radical polymerization and the ion-bonded supramolecular star polymers PSt, PtBA, and PSt-b-PtBA, with six well-defined arms, were successfully synthesized.

Preparation and characterization of As-cast and hot-rolled Mg-3Al-0.5Mn-0.5Zn-1MM alloy

Mg-3Al-0.5Mn-0.5Zn-1MM alloy was prepared by metal mould casting method. The as-cast ingot was homogenized and then hot-rolled at 673 K with total thickness reduction of 65%. Microstructure and mechanical properties of the as-cast and hot-rolled samples were investigated. The results showed that the as-cast sample mainly consisted of alpha-Mg, beta-Mg17Al12, Al10Ce2Mn7, and Al11RE3 (RE = La and Ce) phases. The average grain size of the sample homogenized at 673 K was about 240 gm, and it was greatly refined to about 7 mu m by dynamic recrystallization for the hot-rolled sample.

Interweaving of single-helical and equal double-helical chains with the same helical axis in a 3D metal-organic framework

A novel metal-organic framework with unprecedented interweaving of coaxial single-helical and equal double-helical chains of opposite chirality, which features a super-connective helix simultaneously tangling with eight helices, was reported.

Turn-on fluorescent detection of cyanide based on the inner filter effect of silver nanoparticles

A simple, sensitive fluorescent method for detecting cyanide has been developed based on the inner filter effect (IFE) of silver nanoparticles (Ag NPs). With a high extinction coefficient and tunable plasmon absorption feature, Ag NPs are expected to be a powerful absorber to tune the emission of the fluorophore in the IFE-based fluorescent assays. In the present work, we developed a turn-on fluorescent assay for cyanide based on the strong absorption of Ag NPs to both excitation and emission light of an isolated fluorescence indicator. In the presence of cyanide, the absorber Ag NPs will dissolve gradually, which then leads to recovery of the IFE-decreased emission of the fluorophore. The concentration of Ag NPs in the detection system was found to affect the fluorescence response toward cyanide greatly. Under the optimum conditions, the present IFE-based approach can detect cyanide ranging from 5.0 x 10 (7) to 6.0 x 10 (4) M with a detection limit of 2.5 x 10 (7) M, which is much lower than the corresponding absorbance-based approach and compares favorably with other reported fluorescent methods.

Facile synthesis of polyaniline nanofibers using pseudo-high dilution technique

A new approach for the synthesis of polyaniline nanofibers under pseudo-high dilute conditions in aqueous system has been developed. High yield nanoscale polyaniline fibers with 18-110 nm in diameter are readily prepared by a high aniline concentration 0.4 M oxidation polymerization using ammonium persulfate (APS) as an oxidant in the presence of hydrochloric acid (HCl), perchloric acid (HClO4), (1S)-(+)-10-camphorsulfonic acid (CSA), acidic phosphate PAEG120 (PA120) and sulfuric acid (H2SO4) as the dopants. The novel pathway always produces polyaniline nanofibers of tunable diameters, high conductivity (from 10(0) to 10(1) S/cm) and crystallinity.

Facile, Efficient Copolymerization of Ethylene with Bicyclic, Non-Conjugated Dienes by Titanium Complexes Bearing Bis(beta-Enaminoketonato) Ligands

Copolymerizations of ethylene with 5-vinyl-2-norbornene or 5-ethylidene-2-norbornene under the action of various titanium complexes bearing bis(beta-enaminoketonato) chelate ligands of the type, [(RN)-N-1=C(R-2)CH=C(R-3)O](2)TiCl2 (1, R-1=Ph, R-2=CF3, R-3=Ph; 2, R-1=C6H4F-p, R-2=CF3, R-3=Ph; 3, R-1=Ph, R-2=CF3, R-3=t-Bu; 4, R-1=C6H4F-p, R-2=CF3, R-3=t-Bu; 5, R-1=Ph, R-2=CH3, R-3=CF3; 6, R-1=C6H4F-p, R-2=CH3 R-3=CF3), have been shown to occur with the regioselective insertion of the endocyclic double bond of the monomer into the copolymer chain, leaving the exocyclic vinyl double bond as a pendant unsaturation. The ligand modification strongly affects the copolymerization behaviour. High catalytic activities and efficient co-monomer incorporation can be easily obtained by optimizing the catalyst structures and polymerization conditions.