Regulation of gamete release in the economic brown seaweed Hizikia fusiforme (Phaeophyta)

Gamete release is an essential event in artificial seeding of the economic brown seaweed, Hizikia fusiforme. Mass egg release occurred in the dark, with few eggs being discharged in the light. Release of eggs was elicited with eight practical salinity units (one PSU = 1 g sea salts l(-1)) and was inhibited by salinity levels > 32 PSU. Egg release was optimal at 23 degrees C, and was decreased by 72% in agitated seawater compared to unstirred seawater. Inhibitors of photosynthesis and ions channels suppressed egg release, indicating that this process was physiologically associated with photosynthetic activity and ion transport.

Characterisation of a pathogenic virus isolated from marine threadfin fish (Eleutheronema tetradactylus) during a disease outbreak

An unknown virus was isolated from massive mortality of cultured threadfin (Eleutheronema tetradactylus) fingerlings. The virus replicated in BF-2 fish cell line and produced a plaque-like cytopathic effect. Electron micrographs revealed non-enveloped, icosahedral particles approximately 70-80 nm in diameter composed of a double capsid layer. Viroplasms and subviral particles approximately 30 run in diameter and complete particles of 70 nm in diameter were also observed in the infected BF-2 tissue culture cells. The virus was resistant upon pH 3 to 11 and ether treatment. It is also stable to heat treatment (3 h at 56 T). Replication was not inhibited by 5-iododeoxyuridine (5-IUdR). Acridine orange stain revealed typical reovirus-like cytoplasmic inclusion bodies. Electrophoresis of purified virus revealed 11 segments of double-stranded RNA and five major structural polypeptides of approximately 136, 132, 71, 41 and 33 kDa. Based on these findings, the virus isolated was identified to belong to the genus Aquareovirus and was designated as threadfin reovirus. This virus differed from a majority of other aquareovirus by its increase in virus infectivity upon exposure to various treatments such as high and low pH, heat (56 degreesC), ether and 5-IUdR. The RNA and virion protein banding pattern of the threadfin reovirus was shown to differ from another Asian isolate, the grass carp hemorrhage reovirus (GCV). Artificial injection of the threadfin reovirus into threadfin fingerlings resulted in complete mortality, whereas sea bass (Lates calcarifer) fingerlings infected via bath route showed severe mortality within a week after exposure. These results indicate that the threadfin virus is another pathogenic Asian aquareovirus isolate that could cross-infect into another marine fish, the sea bass. (C) 2002 Elsevier Science B.V. All rights reserved.

Quasi-hexagonal ordered arrays of FePt nanoparticles prepared by a micellar method

Hexagonally ordered arrays of magnetic FePt nanoparticles on Si substrates are prepared by a self assembly of diblock copolymer PS-b-P2VP in toluene, a dip coating process and finally plasma treatment. The as-treated FePt nanoparticles are covered by an oxide layer that can be removed by a 40 s Ar+ sputtering. The effects of the sequence of adding salts on the composition distribution are revealed by x-ray photoelectron spectroscopy measurements. No particle agglomeration is observed after 600 degrees C annealing for the present ordered array of FePt nanoparticles, which exhibits advantages in patterning FePt nanoparticles by a micellar method. Moreover, magnetic properties of the annealed FePt nanoparticles at room temperature are investigated by a vibrating sample magnetometer.

Decoherence of two Josephson charge qubits coupled via sigma(x)sigma(x)-type coupling and exposed to sigma(x) noise

Decoherence properties of two Josephson charge qubits coupled via the sigma(x)sigma(x) type are investigated. Considering the special structure of this new design, the dissipative effects arising from the circuit impedance providing the fluxes for the qubits' superconducting quantum interference device loops coupled to the sigma(x) qubit variables are considered. The results show that the overall decoherence effects are significantly strong in this qubit design. It is found that the dissipative effects are stronger in the case of coupling to two uncorrelated baths than are found in the case of one common bath.

Spontaneous relaxation of a charge qubit under electrical measurement

In this work we first derive a generalized conditional master equation for quantum measurement by a mesoscopic detector, then study the readout characteristics of qubit measurement where a number of remarkable new features are found. The work would, in particular, highlight the qubit spontaneous relaxation effect induced by the measurement itself rather than an external thermal bath.

Exact quantum master equation via the calculus on path integrals

An exact quantum master equation formalism is constructed for the efficient evaluation of quantum non-Markovian dissipation beyond the weak system-bath interaction regime in the presence of time-dependent external field. A novel truncation scheme is further proposed and compared with other approaches to close the resulting hierarchically coupled equations of motion. The interplay between system-bath interaction strength, non-Markovian property, and required level of hierarchy is also demonstrated with the aid of simple spin-boson systems. (C) 2005 American Institute of Physics.

Synthesis and structures of morphology-controlled ZnO nano- and microcrystals

Zinc oxide flower-like bunches were directly synthesized on indium-doped tin oxide (ITO) glass substrates through a simple chemical bath deposition process. By adjusting precursor concentration, other morphologies ( spindles and rods) were also obtained. All of them are hexagonal and single crystalline in nature and grow along the [ 0001] crystallographic direction. The possible growth mechanisms for these nano- and microcrystals were proposed. It was revealed that both the inherent highly anisotropic structure of ZnO and the precursor concentration play crucial roles in determining final morphologies of the products. In addition, vibrational properties of ZnO crystals with different morphologies were investigated by Raman spectroscopy.

Quantum dissipation and broadening mechanisms due to electron-phonon interactions in self-formed InGaN quantum dots

Quantum dissipation and broadening mechanisms in Si-doped InGaN quantum dots are studied via the photoluminescence technique. It is found that the dissipative thermal bath that embeds the quantum dots plays an important role in the photon emission processes. Observed spontaneous emission spectra are modeled with the multimode Brownian oscillator model achieving an excellent agreement between experiment and theory for a wide temperature range. The dimensionless Huang-Rhys factor characterizing the strength of electron-LO-phonon coupling and damping constant accounting for the LO-phonon-bath interaction strength are found to be similar to 0.2 and 200 cm(-1), respectively, for the InGaN QDs. (c) 2006 American Institute of Physics.

Abatement of waste gases and water during the processes of semiconductor fabrication

The purpose of this article is to examine the methods and equipment for abating waste gases and water produced during the manufacture of semiconductor materials and devices. Three separating methods and equipment are used to control three different groups of electronic wastes. The first group includes arsine and phosphine emitted during the processes of semiconductor materials manufacture. The abatement procedure for this group of pollutants consists of adding iodates, cupric and manganese salts to a multiple shower tower (MST) structure. The second group includes pollutants containing arsenic, phosphorus, HF, HCl, NO2, and SO3 emitted during the manufacture of semiconductor materials and devices. The abatement procedure involves mixing oxidants and bases in an oval column with a separator in the middle. The third group consists of the ions of As, P and heavy metals contained in the waste water. The abatement procedure includes adding CaCO3 and ferric salts in a flocculation-sedimentation compact device equipment. Test results showed that all waste gases and water after the abatement procedures presented in this article passed the discharge standards set by the State Environmental Protection Administration of China.

主链含六元氮杂环聚酰亚胺的合成及性能

聚酰亚胺是一类综合性能优异的耐热高分子材料，不仅具有很高的热性能，机械性能，和化学稳定性，还具有较低的介电常数和热膨胀系数，使它在航空，航天工业，微电子工业等诸多领域获得了广泛的应用。研究发现芳杂环的引入能为聚酰亚胺带来一定特殊的性能，因而由芳杂环单体合成的聚酰亚胺一直备受关注。近年来由含氮杂环的单体合成的聚酰亚胺及其性能不断被报道，这些聚合物具有很优异的性能。研究表明这些优异的性能与酰亚胺环的对称性，芳香性和杂原子带来的极性有关。吡啶、嘧啶等芳杂环是刚性的芳杂环分子，具有很好的耐热性能及化学稳定性能，而且杂环中的N 原子又可与金属离子配位和质子化。因而，含吡啶(或嘧啶)环聚合物在具有很好的热稳定性及化学稳定性同时，还会具有较好的可加工性。本论文以硝基取代的vinamidinium salts，amidine salts和易烯醇化的羰基化合物为原料，通过在碱性条件下的环化反应得到得含吡啶环(或嘧啶环)的硝基化合物；硝基化合物用Pd/C和水合肼还原得到棒状含氮芳杂环二胺：2,5-二(4-氨基苯基)嘧啶，2-氨基-5-(4-氨基苯基)嘧啶，2-(4-氨基苯基)-5-氨基嘧啶，2,5-二(4-氨基苯基)吡啶，和2-(4-氨基苯基)-5-氨基吡啶。通过1H-NMR、13C-NMR、IR、MS及元素分析确证了含氮芳杂环二胺及其中间产物的结构。这种二胺或加一定量对苯二胺与均苯二酐(PMDA)或联苯二酐(BPDA)通过两步法聚合获得一系列聚酰亚胺，通过红外、动态力学、静态力学、热重分析、广角X-Ray衍射等实验测试了该类聚合物的结构、热性能、机械性能及结晶性能。研究表明，所得聚酰亚胺的分子链有很高的规整性，表现出很好的化学稳定性，优异的热性能和机械性能。当PPD的含量为50%时，由相同二酐单体所得的聚合物具有最好的综合性能，其中杂环中氮原子的极性对维持聚合物的热稳定性和聚合物在高温条件下的机械性能性起着很重要的作用。并将PPD的含量为50%的聚酰胺酸胶液通过干-湿纺，热亚胺化，和高温牵伸获得聚酰亚胺纤维，并研究了亚胺化条件和牵伸条件对聚酰亚胺纤维性能的影响。

吡唑酮衍生物的稀土配合物光致和电致发光性能研究

稀土配合物的发光具有发射带窄、色纯度高、峰发光位置不受配体环境变化的影响、发光不受温度影响等特点，而且发射峰覆盖400-1800纳米的可见区和近红外区，因此可以作为有机电致发光器件的发光层材料。现在的研究大多集中于铕、铽配合物的电致发光器件研究，对于近红外稀土配合物的电致发光以及发白光的镝配合物研究相对较少，但是近红外发光的稀土铒、钕、镱在光通讯、激光技术、生物医学、荧光探针等方面具有特殊的应用前景。在本论文中主要阐述了新型稀土配合物的设计与合成、在器件方面的应用以及器件结构机理的研究。 在本论文中，我们主要研究吡唑酮的衍生物配体对于稀土离子的敏化激发作用。通过配体基团的改性，得到发光更有效的新型稀土配合物。首先，合成了配体PM，并选择TP、Phen、Bipy、Bath做第二配体制备镝、铒、钕、镱、钐等的配合物。解析了配合物的晶体结构，测试得到了各种配合物的光致发光性能，系统分析了几种配合物中配体到中心稀土离子的能量传递过程，研究了配体对稀土的敏化机制。其中镝配合物显示近白光的发射，色坐标为x=0.35，y=0.40，以此配合物为发光层的器件显示明亮的白光，最大发光亮度为527cd/m2，是目前已经报道的镝配合物器件中，性能最突出的一个。 设计合成了配体PT、PC、PF，利用TP和Bath做中性配体与镱离子形成配合物YbPT3Bath、YbPT3TP、YbPC3Bath，它们都显示977纳米的近红外发射。经过分析发现，配体对镱离子的敏化过程是通过电子转移的机制来完成的。通过几种镱配合物发光强度对比发现YbPT3Bath、YbPC3Bath的发射最强。首先将YbPT3Bath用于电致发光器件中，发现其具有较好的电子传输特性，而且YbPM3TP2具有较好的空穴传输特性。因此，我们将这两种配合物结合制备了双发光层电致发光器件，得到的器件比单发光层器件的性能提升了若干倍。我们认为，双发光层器件结构改善了载流子的传输和最终的复合，使得激子在发光层内形成，提高激子激发发光层材料的效率。最后，利用这种双发光层器件结构得到了辐照度比较理想的镱配合物近红外器件。 对ErPM3TP2、NdPM3TP2配合物的发光性能做了系统研究。首先，分析了它们的晶体结构，得到了具体的晶体参数和结构组成。二者在紫外区的吸收光谱都显示为配体的吸收，在紫外区之后出现了稀土离子的特征吸收峰，由此我们利用Judd-Ofelt理论分析计算了Er3+、Nd3+离子在这个配位环境中的振子强度参数，最后得到Er3+、Nd3+离子从激发态能级到下能级的电偶极跃迁辐射几率以及相应的自然寿命值。利用这两种配合物做为发光层材料制备了系列近红外电致发光器件，得到理想的辐照度强度，证明它们在制备近红外器件方面具有潜在应用价值。

稀土配合物光致发光和电致发光性能的研究

有机电致发光器件(organic light-emitting diodes, OLEDs)由于具有全色、低压直流驱动、视角广、高效率和易于制备大屏幕等优点，在平板显示领域具有广阔的应用前景，已引起世界范围内科技界和企业界的广泛重视。稀土配合物作为发光及载流子传输层材料，具有窄带发射和发射波长分布范围广的特点，有利于实现高的色纯度。然而，有机电致发光的机理还未完全弄清楚，稀土配合物电致发光器件距离实际应用还比较远，需要进一步进行研究。本论文研究了Tb~(3+)、Eu~(3+), Sm~(3+)配合物的光致发光和电致发光性质，制备了绿色、红色和橙色电致发光器件，并对稀土配合物的电致发光机理进行了探讨。对于试配合物，以acac为第一配体，研究了第二配体AAP和bath对配合物和器件发光性能的影响并对器件的优化进行了讨论；以Tb(acac)_3bath为发光中心，发现电致发光中~5D_4→~7F_5跃迁相对~5D_4→~7F_5跃迁的增强现象；以Tfacac为第一配体，首次讨论了F取代H对于配体的三重态能级的降低和对配合物以及电致发光器件发光强度的增强作用，对于提高稀土配合物电致发光的性能提供了参考依据。对于铺配合物，以Tfacac为第一配体，以phen和bipy为第二配体，制备了红色电致发光器件并进一步验证了F取代H对于配体的三重态能级的降低作用；以HTH为第一配体，国际上首次报道了室温下Eu~(3+)离子的~5D_1→~7F_J的跃迁，并且其强度依赖于驱动电压的强度，光致发光和电致发光的不同表明二者的发光机理有所不同，并对铺配合物电致发光机理进行了讨论；以HTH为第一配体，国际上首次报道了衫配合物的电致发光现象，并且最大得到了21 cd/m~2的发光强度；为了改善稀土β-二酮配合物光稳定性和热稳定性差的缺点，引入了稀土芳香梭酸配合物，并对配体进行了引入长链的化学修饰，提高了配合物在一般有机溶剂中的溶解度，用旋涂法制备的器件的最大发光亮度达到了174 cd/m~2.

1,5-二氮杂戊二烯合成非对称联吡啶研究

联吡陡及其衍生物不仅用于化工和药物合成的中间体，而且具有独特的赘合作用，可被用于金属催化剂配体等方面，因此它的合成方法研究引起了人们广泛的兴趣。但是非对称联吡陡的合成日前方法仍很少。本文利用己经被成功使用于其他含氮杂环的二碳合成子-1，5-二氮杂戊二烯（vinamidiniulnsalts），合成了单取代的2，2'-，2，3'-，2，4，一二类联吡陡。在合成1，5-二氮杂戊二烯的过程中：确立了一条以四甲氧基丙烷为原料一步合成l，5一二氮杂戊二烯的简捷，经济，易工业化的合成路线，并成功进行了公斤级的放大实验；优化了1，5-二氮杂戊二烯的亲电取代反应，高收率的获得溟代，硝化的1，5-二氮杂戊二烯；优化了从取代乙酸合成p取代1，5-二氮杂戊二烯的合成方法，高收率的获得九种p芳基取代1，5-二氮杂戊二烯。本文研究了非对称联吡睫合成的一种新方法：在碱性条件下，取代的1，5-二氮杂戊二烯盐各种乙酞基吡陡亲核加成的产物，不经分离直接和氨进行［3＋2＋1〕的成环反应，可以高收率的合成出单取代的2，2气，2，3气，2，4气三类联吡陡。这一方法己经被成功的应用于芳基取代，卤素取代，硝基取代以及无取代基的1，5-二氮杂戊二烯与三种乙酞基吡陡的反应。这种成环反应的收率与1，5-二氮杂戊二烯俘位的吸电子特征相关。因此，针对不同取代基的1，5-二氮杂戊二烯在溶剂，碱的选择以及反应温度的控制等方面进行了优化。从而成功合成出近30种单取代的非对称联吡陡。一这种合成方法，原料价格低廉，实验操作简单，而且收率高，非常适合大量合成的要求。

Density Gradient Ultracentrifugation of Nanotubes: Interplay of Bundling and Surfactants Encapsulation

Density gradient ultracentrifugation (DGU) has emerged as a promising tool to prepare chirality enriched nanotube samples. Here, we assess the performance of different surfactants for DGU. Bile salts (e.g., sodium cholate (SC), sodium deoxycholate (SDC), and sodium taurodeoxycholate (TDC)) are more effective in individualizing Single Wall Carbon Nanotubes (SWNTs) compared to linear chain surfactants (e.g., sodium dodecylbenzene sulfonate (SDBS) and sodium dodecylsulfate (SDS)) and better suited for DGU. Using SC, a narrower diameter distribution (0.69-0.81 nm) is achieved through a single DGU step on CoMoCAT tubes, when compared to SDC and TDC (0.69-0.89 nm). No selectivity is obtained using SDBS. due to its ineffectiveness in debundling. We assign the reduce selectivity of dihydroxy bile salts (S DC and TDC) in comparison with trihydroxy SC to the formation of secondary micelles. This is determined by the number and position of hydroxyl ( OH) groups on the a-side of the steroid backbone. We also enrich CoMoCAT SWNT in the 0.84-0.92 nm range using the Pluronic F98 triblock copolymer. Mixtures of bile salts (SC) and linear chain surfactants (SOS) are used to enrich metallic and semiconducting laser-ablation grown SWNTs. We demonstrate enrichment of a single chirality, (6,5), combining diameter and metallic versus semiconductillg separation on CoMoCAT samples.

Real-time counting of single electron tunneling through a T-shaped double quantum dot system

Real-time detection of single electron tunneling through a T-shaped double quantum dot is simulated, based on a Monte Carlo scheme. The double dot is embedded in a dissipative environment and the presence of electrons on the double dot is detected with a nearby quantum point contact. We demonstrate directly the bunching behavior in electron transport, which leads eventually to a super-Poissonian noise. Particularly, in the context of full counting statistics, we investigate the essential difference between the dephasing mechanisms induced by the quantum point contact detection and the coupling to the external phonon bath. A number of intriguing noise features associated with various transport mechanisms are revealed.