An investigation of low-field magnetoresistance in the double perovskites Sr2Fe1-xZnxMoO6, x=0, 0.05, 0.15 and 0.25

The electrical, magnetic and transport properties of Zn doped polycrystalline samples of Sr2Fe1-xZnxMoO6 ( x = 0, 0.05, 0.15 and 0.25) with the double perovskite structure have been investigated. The subtle replacement of Fe3+ ions by Zn2+ ions facilitates the formation of a more ordered structure, while further substitution leads to disordered structure because of the presence of a striped phase. Analysis of the x-ray powder diffraction patterns based on Rietveld analysis indicates that the replacement of Fe3+ by Zn2+ ions favours the formation of Mo6+ ions. The spin-glass behaviour can be explained on the basis of the competition between the antiferromagnetic superexchange and the ferromagnetic double-exchange interaction. The low-field magnetoresistance was moderately enhanced at x = 0.05, and its origin was found to be the competition between the decrease of the concentration of the itinerant electrons and the weaker antiferromagnetic superexchange in the antiphase boundaries. An almost linear negative magnetoresistance in moderate field has been observed for x = 0.25. A possible double-exchange mechanism is proposed for elucidating the observations; it also suggests a coexistence of (Fe3+, Mo5+) and (Zn2+, Mo6+) valence pairs.

Spatially-confined crystallization of poly(vinylidene fluoride)

Nanometre-sized poly(vinylidene fluoride) (PVDF) particle domains in a confined space were obtained by blending PVDF with excess poly(methyl methacrylate) (PMMA). When these particles were small enough they showed beta -form structure, which was different from the structure of bigger particles or PVDF bulk. However, the beta -form was thermodynamically metastable because it could eventually be transformed to a more stable phase by annealing at a certain temperature. Larger particle domains were of identical phase to the bulk, indicating that small size favours the formation of the beta -form. (C) 2000 Society of Chemical Industry.

Effects of molecular weight and interaction parameter on the glass transition temperature of polystyrene mixtures and its blends with polystyrene/poly(2,6-dimethyl-p-phenylene oxide)

The glass transition temperature (T-g) of mixtures of polystyrene (PS) with different molecular weight and of blends of poly(2,6-dimethyl-p-phenylene oxide) (PPO) and polystyrene with different molecular weight (DMWPS) was studied by a DSC method. For the whole range of composition, the curves of T-g vs composition obtained by experiment were compared with predictions from the Fox, Gordon-Taylor, Couchman and Lu-Weiss, equations. It was found that the experimental results were not in agreement with those from the Fox, Gordon-TayIor and Couchman equations for the binary mixtures of DMWPS, where the interaction parameter chi was approximately zero. However, for the blends PPO/DMWPS (chi < 0), with an increase of molecular weight of PS, it was shown that the experimental results fitted well with those obtained from the Couchman, Gordon-Taylor and Fox equations, respectively. Furthermore, the Gordon-Taylor equation was nearly identical to the Lu-Weiss equation when \chi\ was not very large. Further, the dependence of the change of heat capacity associated with the glass transition (Delta C-p) on the molecular weight of PS was investigated and an empirical equation was presented. (C) 1997 Elsevier Science Ltd.

STRUCTURE OF THIAMINE BROMIDE SESQUIHYDRATE

3-[(4-Amino-2-methyl-5-pyrimidinyl)-methyl]-5-hydroxyethyl-4-methylthiazolium bromide sesquihydrate, C12H17N4OS+.Br-.1.5H2O, M(r) = 372.28, monoclinic, P2(1)/a, a = 11.676 (2), b = 24.819(7), c = 12.344 (3) angstrom, beta = 113.74(2)-degrees, V= 3274 (1) angstrom3 , Z = 8, D(x) = 1.51 g cm-3 (Mo Kalpha) = 0.71069 angstrom, mu = 26.2 cm-1, F(000) = 1528, T 293 K, R = 0.062 for 2720 observed reflections. Both the independent thiamine molecules A and B in the asymmetric unit adopt the common F conformation. A bromide anion is held by four neighbouring thiamine molecules through C(2)-H...Br hydrogen bonds and Br ... thiazolium-ring electrostatic interactions. Another bromide anion (or a water molecule) bridges the pyrimidine and thiazolium moieties of molecule A (or B) through a hydrogen bond with the amino group and an electrostatic interaction with the thiazolium ring.

Antioxidative principals of Jussiaea repens: an edible medicinal plant

Jussiaea repens L. (JRL) is an edible medicinal plant and is also used as a vegetable by the local people in southwestern China. The crude extract and its four fractions derived from JRL were evaluated for the 1,1-diphenyl-2-picrylhydrazyl radical-scavenging ability, hydroxyl radical-scavenging capacity and the potassium ferricyanide reduction property. The ethyl acetate-soluble fraction (EAF) and EAF6 (a subfraction derived from EAF) were the most valuable fraction and subfraction, respectively. Furthermore, bioactivity-guided chromatographic fractionation revealed that three pure compounds greatly contributed to the antioxidant activities. Qualitative and quantitative analyses of the major antioxidant constituents in the extract were systematically conducted by NMR, mass spectral analyses and RP-HPLC. The result demonstrated that rosmarinic acid (2.00 mg g(-1) JRL dry weight) quercetin 3-O-beta-D-glucopyranoside (9.88 mg g(-1) JRL dry weight), and kaempferol 3-O-beta-D-glucopyranoside (1.85 mg g(-1) JRL dry weight) were the major antioxidative constituents in JRL. These compounds are reported for the first time from this plant.

潮间带纤毛虫原生动物和小型底栖动物生态学研究

微型和小型底栖动物是底栖微/小食物网的重要构成。相对浮游生态系统, 迄今国际间对底栖食物网的认知极为欠缺。这一方面是由于微型生物形态和功能上的复杂性和多样性, 另一方面原因在于研究方法的障碍—主要是微型和小型底栖动物的定量提取和定性分析。本研究首先进行了方法学改良, 并应用新方法对底栖微食物网的重要功能类群—纤毛虫原生动物和小型底栖动物进行了不同生境的周年按月采样, 定性及定量研究的同时, 联系环境因子对微型和小型底栖生物的环境监测进行了探讨。 微型和小型底栖生物的定量研究首先涉及到目标生物在沉积物中的有效提取, 目前硅胶液提取是普遍使用的方法, 其中Ludox液主要应用于小型生物, 它不但价格便宜而且比重合适, 因此在常规生态研究中被广为接受。不过, Ludox易与于海水中的阳离子产生凝结而无法直接用于微型生物; 目前唯一直接应用于微型生物提取的是Percoll硅胶液, 但其昂贵的价格使其在常规生态研究中受到极大限制。本研究以价格低廉的Ludox 硅胶液结合定量蛋白银染色 (QPS) 技术开发了一种新的方法, 即Ludox-QPS法。主要流程为: 样品采集与固定、淘洗/稀释降盐、Ludox密度梯度离心、过滤浓缩和琼脂包埋, QPS染色、永久封片及鉴定计数。添加已知数量的纤毛虫至无生物底泥的重获实验表明, 该密度梯度离心的提取率大于94%; 该方法对自然沉积物中纤毛虫的提取率达97.6%, 对沙质、泥沙质和泥质中海洋线虫的提取率分别达97%、96.9% 和97.8%。对比实验表明, 经QPS制片获得的小型动物的丰度和类群数量与传统方法相当或更高, 尤其当小个体虫体占优势时, 该法显示出较传统方法 (导致数量低估) 更为明显的定量优越性。该方法除用于纤毛虫和小型动物的定量分析外, 还具有较高的分类分辨率, 染色后的纤毛虫原生动物大多类群可鉴定到属, 部分可鉴定到种, 以此可在群落水平上研究其生态作用。 根据新开发的Ludox-QPS技术, 在大沽河潮间带依据盐度梯度选定2个站位 (IIQ和营海) 进行了周年按月采样, 对底栖纤毛虫和小型底栖动物进行了定量研究。纤毛虫原生动物在IIQ和营海的年平均丰度分别为2236 inds./10 cm2 和935 inds./10 cm2 (28 inds./ml 和12 inds./ml), 平均生物量分别为119.1 gC/10 cm2和54.2 gC/10 cm2 (1.5 gC /ml 0.7 gC/ml)。丰度的季节变化趋势为: 春天 > 秋天 > 夏天 > 冬天。垂直分布上, 在营海分布于表层0-0.5 cm 的比例为57.1%, 分布于0.5-2 cm、2-4 cm和4-8 cm比例分别为23.1%、11.4% 和8.5%; 13个月中除12月份外, 4-8 cm均有一定数量的纤毛虫分布; 而在IIQ, 97% 的纤毛虫分布在0-0.5 cm, 分布在0.5-2 cm、2-4 cm和4-8 cm比例分别为2.4%、0.4%和0.2%, 4-8 cm的分布只发生在春季和秋季。纤毛虫的多样性季节变化明显, 春秋季物种丰富, 两个站点每毫升沉积物的平均物种数分别为18和6。Two-Way Crossed ANOSIM 分析表明纤毛虫群落在月份间和站点间的差异极其显著。Pseudochilodonopsis sp., Chilodontopsis sp., Euplotes sp.及Prorodon sp.是表征两个生镜中纤毛虫群落的主要类群。 同时, 发现了14个小型生物类群, 其中线虫在IIQ和营海的丰度优势度分别为97.4% 和78.6%。小型动物在IIQ和营海的年平均丰度分别为4793 inds./10 cm2和8915 inds./10 cm2 (60 inds./ml和111 inds./ml), 其生物量分别为1068.8 gC /10 cm2和1790 gC /10 cm2 (13.4 gC/ml和22.4 gC/ml)。小型底栖动物的丰度在IIQ的季节变化为: 夏季 (7888 inds./10cm2) > 秋季 (5447 inds./10cm2) > 春季 (3731 inds./10cm2) > 冬季 (2780 inds./10cm2); 在营海则完全相反: 冬季 (15579 inds./10cm2) > 春季 (10691 inds./10cm2) > 秋季 (6611 inds./10cm2) > 夏季 (4667 inds./10cm2)。小型底栖动物和纤毛虫的相对重要性存在明显的区域和季节差异。 纤毛虫原生动物、小型动物及环境因子的相关分析表明, 纤毛虫的丰度和多样性与温度和盐度及有机质含量显著相关, 与小型动物没有显著相关性; 群落结构分析表明, 温度、有机质和小型动物的丰度的组合与纤毛虫群落丰度的相关系数为0.345; 盐度、脱镁叶绿素、有机质和小型动物生物量的组合与纤毛虫群落多样性的相关系数为0.403。依据海洋线虫和桡足类的比值 (N/C) 推测, IIQ 可能存在严重的有机污染, 营海则存在明显的季节波动, 8月和9月及2月可能是污染最严重的季节, 这种状况在纤毛虫群落结构的CLUSTER聚类中得到验证。虽然目前尚没有形成有关微型底栖生物-纤毛虫原生动物的污染检测的直接依据, 但本研究说明纤毛虫群落的确对环境污染具有一定的感应度, 而且这种感应和利用小型生物的主要类群估算的污染检测 (N/C) 存在一定程度的关联。 90年代早期有关青岛湾有机污染带的研究表明, 经彻底截污后, 其环境状况向良性发展。进一步了解该湾的健康状况, 2006.5-2007.5月对该湾沙质和泥沙质的小型动物进行周年按月采样。小型动物在泥沙质和砂质沉积物中的年平均丰度分别为4853 ± 1292 inds./10 cm2和1528 ± 569 inds./10 cm2; 年平均总生物量分别为1434.1 ± 897.0 gC /10cm2和720.7 ± 353.8 gC/10cm2。沙质底小型生物的丰度季节波动明显, 6月份和12月份最高, 3月份和9月份最低; 泥沙质季节波动不明显, 6月份最高。两个站点均有48%的小型动物分布在0-0.5 cm 表层, 海洋线虫在表层的分布比例分别为48% (泥沙质) 和34% (砂质)。共检获14个小型动物类群, 其中线虫在泥沙质和砂质沉积物中的年平均丰度分别4619 ± 1255 inds./10cm2和1014 ± 376 inds./10cm2, 其丰度优势度分别为95.2%和66.4%。其它在丰度上占优势的类群, 泥沙质依次为多毛类 (1.5%)、甲壳幼体 (1.5%) 和桡足类 (0.7%); 沙质依次为: 甲壳类幼体 (12.6%)、腹毛类 (8.3%) 和 桡足类 (6.2%)。CLUSTER聚类分析表明, 泥沙质和和砂质中小型生物的丰度组成具有64%的相似性。BIOENV分析表明, 温度、盐度、中值粒径和粘土粉砂含量的组合最能解释不同月份之间和不同站位间的差异, 其相关系数为0.614。依据小型生物的丰度和类群组成, 表明泥沙质底尚存一定的有机污染。

黄海浮游动物功能群的研究

浮游动物在海洋生态系统物质循环和能量流动中起着至关重要的作用。浮游动物物种组成、生物量和次级生产力的变化会改变生态系统的结构和功能。在黄海生态系统中如何描述这个过程，并使它易于模拟是本论文的研究目的。生物量和生产力是海洋生态系统食物网的基础。谁是浮游动物生物量和次级生产力的基础？哪些种类在生态系统中起关键作用？这些问题在黄海这样的温带陆架边缘海区很难回答，原因是物种组成、生物量和生产力的季节变化显著。因此，在对黄海食物产出的关键过程进行模拟时，需要应用既准确又简便的方法来对浮游动物群落的生态过程进行模拟。在对黄海浮游动物群落结构和物理海洋学特征进行充分的分析之后，浮游动物功能群的方法被确定用来进行黄海生态系统结构和功能的模拟。 根据浮游动物的粒径、摄食习性和营养功能，黄海浮游动物被分为6个功能群：大型浮游甲壳动物功能群（Giant crustacean，GC）、大型桡足类功能群（Large copepods, LC）、小型桡足类功能群（Small copepods，SC）、毛颚类功能群（Chaetognaths）、水母类功能群（Medusae）和海樽类功能群（Salps）。GC、LC和SC是按照粒径大小而划分的功能群，他们是高营养层次的主要食物资源。毛颚类和水母类是两类胶质性的肉食性浮游动物功能群，他们与高营养层次竞争摄食饵料浮游动物；海樽类与其他浮游动物种类竞争摄食浮游植物，而本身的物质和能量却不能有效的传递到高营养层次。本文研究报道了浮游动物各功能群的时空分布、基于浮游动物动能群的黄海生态区划分、饵料浮游动物功能群的生产力、毛颚类对浮游动物的摄食压力以及中华哲水蚤（Calanus sinicus）的摄食生态学。 春季，浮游动物生物量为2.1 g m–2，GC、LC和SC对生物量的贡献率分别为19, 44 和 26%。高生物量的LC和SC功能群主要分布于山东半岛南岸的近岸海域，而GC主要分布在远岸站位。夏季，浮游动物的生物量为3.1 g m–2，GC贡献了73%。GC、LC和SC主要分布在黄海的中部海域。秋季，浮游动物生物量为1.8 g m–2，GC、LC和SC的贡献率相似，分别为36, 33和23%，高生物量的GC和LC分布在黄海中部，而SC主要分布在远岸站位。GC和LC是冬季浮游动物生物量（2.9 g m–2）的优势功能群，分别贡献率了57%和27%，高生物量的GC、LC和SC都分布在黄海的中部海域。与GC、LC和SC相比，毛颚类生物量较低，主要分布于黄海的中北部海域。水母类（本文中指小型水母类）和海樽类斑块分布明显，主要分布于黄海沿岸和北部海域。属于不同功能群的约10个种类为浮游动物的优势种，控制着浮游动物群落的动态。 春季，黄海可以被分成4个浮游动物生态区，浮游动物生物量的分布中心位于山东半岛南岸近岸海域，与第一个生态区相对应，LC和SC在分布中心起主要的控制作用；夏、秋和冬季，黄海分别被分成3、4和3个生态区，浮游动物生物量的分布中心均位于黄海的中部海域，均与各季节的第一个生态区相对应，GC和LC是分布中心生态区的优势功能群，对分布中心起主要的控制作用。黄海冷水团（YSCBW）在GC、LC和SC的空间分布模式中起着重要的作用。黄海不同季节浮游动物生态区的空间分布模式及生态区中起控制作用的优势功能群类别有着重要的生态学意义。 我们将饵料浮游动物功能群细化为0.16–0.25 mm、0.25–0.5 mm、0.5–1 mm、1–2 mm和 >2 mm5个粒径组。应用生物能量学的方法研究了不同粒径浮游动物的生产力。结果表明：浮游动物次级生产力5月份最高，为91.9 mg C m–2 d–1，其次是6月和9月，分别为75.6 mg C m–2 d–1和65.5 mg C m–2 d–1，8月、3月和12月较低，仅为42.3 mg C m–2 d–1、35.9 mg C m–2 d–1和27.9 mg C m–2 d–1。根据这些结果，黄海浮游动物年次级生产力为18.9 g C m–2 year–1。0.16–0.25 mm和 0.25–0.5 mm 两个粒径组对浮游动物次级生产力的贡献率为58–79%，即相对应的SC功能群的周转率（P/B, 0.091–0.193 d–1）要高于GC和LC。 黄海毛颚类功能群的优势种类为强壮箭虫（Sagitta crassa）、纳嘎箭虫（S. nagae）、肥胖箭虫（S. enflata）和百陶箭虫（S. bedoti）。我们对这四种箭虫的生产力和对浮游动物生物量和生产力的摄食压力进行了研究。结果表明：黄海毛颚类总的生物量为98–217 mg m–2，总的生产力为1.22–2.36 mg C m–2 d–1。黄海毛颚类的生物量占浮游动物总生物量的6.35–14.47%，而生产力仅占浮游动物总生产力的2.54–6.04%。强壮箭虫和纳嘎箭虫是黄海毛颚类功能群的绝对优势种，控制着黄海毛颚类群落的动态。黄海毛颚类总的摄食率为4.24–8.18 mg C m–2d–1，对浮游动物现存量和生产力总的摄食压力分别为为0.94%和12.56%。黄海冬季，浮游动物的现存量和生产力为0.4 g C m–2和0.026 g C m–2d–1，而毛颚类的摄食压力却达到了全年的最大值，为1.4%和20.94%。因此，毛颚类的摄食可能对冬季浮游动物群落结构造成重要的影响。通过不同体长组箭虫的摄食率可以推断，黄海毛颚类全年主要摄食小型桡足类，对SC功能群的摄食压力最大。但是在夏季黄海冷水团形成的月份，毛颚类对前体长为2 mm的LC功能群中的种类摄食压力也较大，但此时，由于优势种中华哲水蚤进入滞育阶段，因此毛颚类的摄食会对其种群数量造成严重的影响。 中华哲水蚤在春、秋季的摄食率分别为2.08–11.46和0.26–3.70 µg C female–1 day–1，与微型浮游生物的现存量呈显著的正相关。春季，在黄海的北部，中华哲水蚤通过摄食微型浮游生物吸收的碳量能够满足其代谢和繁殖需求，而在黄海的南部和秋季黄海冷水团锋区附近，中华哲水蚤必须通过摄食其他类型的食物资源来维持其代谢和生殖需求。较低的摄食率、无产卵以及种群中CV期桡足幼体占优势表明，秋季中华哲水蚤在黄海冷水团区域内处于滞育状态。中华哲水蚤优先摄食微型原生动物，并且春季中华哲水蚤总的生长效率（GGE, 3–39%）与食物中微型原生动物的比例呈显著的正相关，表明微型原生动物具有较高的营养价值。但是，因较低的产卵率（0.16–12.6 eggs female–1 day–1）而导致的中华哲水蚤较低的总生长效率（13.4%），可能就是由于其食物中的必需营养成分含量不足（或缺乏）造成的。 本文从生物量的角度，对黄海浮游动物各功能群的时空分布、生态区划分进行了研究报道，对GC、LC和SC功能群的生产力、毛颚类对浮游动物的摄食压力和中华哲水蚤的摄食生态学进行了较为深入的研究，这些结果为黄海食物产出的关键过程的模拟提供了基础资料。今后的研究重点应搞清楚黄海水母类对浮游动物次级生产力的摄食压力和海樽类在食物产出模型中产生的负效应的程度，浮游动物各功能群的组成、季节变化和空间分布模式的长期变化，尤其是在气候变化和人类活动的影响下，将是今后研究的重点。

迟缓爱德华氏菌基因组fosmid文库的构建、opp基因簇的克隆及aroA基因缺失突变株的构建

本研究构建了迟缓爱德华氏菌(Edwardsiella tarda)LSE40 基因组fosmid文库，该文库共包含2 500个克隆，插入片段平均大小为33.6kb，文库总容量约84Mb，覆盖E.tarda LSE40基因组（按5Mb计算）超过16倍。随机挑取1 000个fosmid克隆进行双末端测序共得到1 741条高质量的序列，序列平均长度546 bp，全长949 997bp，约为E.tarda基因组的19％。将这些序列提交到KEGG自动注释服务器KAAS对所得序列进行代谢途径分析，得到E.tarda LSE40的KO (KEGG Orthology) 注释。分析结果表明，与代谢途径相关的基因有932条序列，与环境信息处理相关基因283条，与遗传信息处理相关基因220条，与细胞进程和人类疾病相关的基因分别为64条和16条。同时将序列进行BlastX，按照微生物致病性共同主题找到61个毒力相关基因。Fosmid文库的建立和部分基因组序列的生物信息学分析为进一步研究E.tarda LSE40的致病机制、代谢机制和生理生态机制提供了丰富的物质基础。 通过比较基因组的方法，从E.tarda LSE40 fosmid文库克隆到编码寡肽透过酶的opp基因簇，该基因簇全长6 741bp，含有5个ORF，依次编码OppA-B-C-D-F 5个蛋白；位于oppA和oppB的间隔区和oppF之后的非编码区各有一个茎环结构，推测分别为oppA和opp基因簇的转录终止子。以细菌OppA的保守结构域SBP_bac_5构建系统发生树，结果显示E.tarda LSE40与同属细菌E.ictaluri的亲缘关系最近，与肠杆菌科细菌的亲缘关系较近，与革兰氏阳性细菌的亲缘关系较远，表明OppA的SBP_bac_5结构域可作为细菌分类鉴定的依据。 从E.tarda LSE40 fosmid文库克隆aroA基因全序列，该序列全长1 287bp，编码428个氨基酸，与鲶鱼爱德华氏菌(E. ictaluri)氨基酸相似性在94%，与其他肠杆菌科菌如Escherichia coli和Yersinia enterocolitica相似性在73%-74%。通过In-frame deletion构建了E.tarda LSE40 aroA缺失突变株。与野生型相比，aroA突变株的半数致死量LD50提高了62倍。在牙鲆接种~106cfu/ml的E.tarda细菌时，接种野生型细菌的牙鲆在6天内全部死亡，濒死鱼的细菌数达7.97×108cfu/ 100mg；而接种aroA突变株的牙鲆没有出现死亡，28天后检测不到细菌的存在。实验结果为进一步评价aroA突变株作为减毒活疫苗打下了基础。

复杂地质条件下高精度地震勘探技术研究与应用-以泌阳凹陷为例

In order to carry out high-precision three-dimensional "integration" for the characteristics of the secondary seismic exploration for Biyang Depression, in the implementation process, through a combination of scientific research and production, summed up high-precision seismic acquisition, processing and interpretation technologies suitable for the eastern part of the old liberated areas, achieved the following results: 1. high-precision complex three-dimensional seismic exploration technology series suitable for shallow depression Biyang block group. To highlight the shallow seismic signal, apply goal-based observing system design, trail from the small panel to receive and protect the shallow treatment of a range of technologies; to explain the use of three-dimensional visualization and coherent combination of full-body three-dimensional fine interpretation identification of the 50-100 m below the unconformity surface and its formation of about 10 meters of the distribution of small faults and improve the small block and stratigraphic unconformity traps recognition. 2. high-precision series of three-dimensional seismic exploration technology suitable for deep depression Biyang low signal to noise ratio of information. Binding model using forward and lighting technology, wide-angle observation system covering the design, multiple suppression and raise the energy of deep seismic reflection processing and interpretation of detailed, comprehensive reservoir description, such as research and technology, identified a number of different types of traps. 3. high-precision seismic exploration technology series for the southern Biyang Depression high steep three-dimensional structure. The use of new technology of seismic wave scattering theory and high-precision velocity model based on pre-stack time migration and depth migration imaging of seismic data and other high-precision processing technology, in order to identify the southern steep slope of the local structure prediction and analysis of sandstone bedrock surface patterns provide a wealth of information.

填土边坡水文作用机理与破坏过程研究—以深圳羊宝地填土滑坡为例

A full understanding of failure mechanism, critical hydrological condition, and process of mobilization and deposition of a landslide is essential for optimal design of stabilization measure and forecasting of landslide hazard. This requires a quantitative study of hydrological response of a slope to rainfall through field monitoring, laboratory test and numerical modelling. At 13:40 on September 18, 2002, a fill slope failed following a period of prolonged rain in Shenzhen, resulting in 5 fatalities and 31 injuries. The failed mass with a volume about 2.5×104m3 traveled about 140m on level ground. Field monitoring, laboratory test, theoretical analysis and numerical modelling were carried out to undestand the hydrological response and failure mechanism of this fill slope. This thesis mainly focuses on the following aspects: (1) The hydrological responses and failure processes of slopes under rainfall infiltration were reviewed. Firstly, the factors influencing on the hydrological responses of slopes were analysed. Secondly, the change of stress state of slope soil and modelling methods of slope failure under rainfall infiltration were reviewed. (2) The characteristics of the Yangbaodi landslide and associated rainfall triggering the failure were presented. The failure was characterized by shallow flowslide, due to an increase of ground water table caused by rainfall infiltration. (3) A fully automated instrumentation was carried out to monitor rainfall, and saturated – unsaturated hydrological response of the fill slope, using a raingauge, piezometers, tensiometers and moisture probes. A conceptual hydrogeological model was presented based on field monitoring and borehole data. Analysis of monitoring data showed that the high pore water pressure in fill slope was caused by upward flow of semiconfined groundwater in the moderately decomposed granite. (4) Laboratory and in-situ testing was performed to study the physical and mechanical properties of fills. Isotropically consolidated undrained compression tests and anisotropically consolidated constant shear stress tests were carried out to understand the failure mechanism of the fill slope. It is indicated that loosely compacted soil is of strain-softening behaviour under undrained conditions, accompanied with a rapid increase in excess pore water pressure. In anisotropically consolidated constant shear stress tests, a very small axial strain was required to induce the failure and the excess pore water pressure increased quickly at failure. This indicated that static liquefaction caused by rise in groundwater table due to rainfall infiltration occurred. (5) The hydraulic conductivity of the highly and moderately decomposed granite was estimated using monitering data of pore water pressure. A saturated – unsaturated flow was modeled to study the hydrological response of the fill slope using rainfall records. It was observed that the lagged failure was due to the geological conditions and the discrepancy of hydraulic conductivity of slope soils. The hydraulic conductivity of moderately decomposed granite is relatively higher than the other materials, resulting in a semiconfied groundwater flow in the moderately decomposed granite, and subsequent upward flow into the upper fill layer. When the ground water table in the fill layer was increased to the critical state, the fill slope failed. (6) Numerical exercises were conducted to replay the failure process of the fill slope, based on field monitoring, laboratory and in-situ testing. It was found that the fill slope was mobilized by a rapid transfer of the concentrated shear stress. The movement of failure mass was characterized by viscosity fluid with a gradual increase in velocity. The failure process, including mobilization and subsequent movement and deposition, was studied using numerical methods.