Temporal and spatial variability in nitrogen uptake kinetics during harmful dinoflagellate blooms in the East China Sea

Temporal and spatial variability in the kinetic parameters of uptake of nitrate (NO3-), ammonium (NH4+), urea, and glycine was measured during dinoflagellate blooms in Changjiang River estuary and East China Sea coast, 2005. Karenia mikimotoi was the dominant species in the early stage of the blooms and was succeeded by Prorocentrum donghaiense. The uptake of nitrogen (N) was determined using N-15 tracer techniques. The results of comparison kinetic parameters with ambient nutrients confirmed that different N forms were preferentially taken up during different stages of the bloom. NO3- (V-max 0.044 h(-1); K-s 60.8 mu M-N) was an important N source before it was depleted. NH4+ (V-max 0.049 h(-1); K-s 2.15 mu M-N) was generally the preferred N. Between the 2 organic N sources, urea was more preferred when K. mikimotoi dominated the bloom (V-max 0.020 h(-1); K-s 1.35 mu M-N) and glycine, considered as a dominant amino acid, was more preferred when P. donghaiense dominated the bloom (V-max 0.025 h(-1); K-s 1.76 mu M-N). The change of N uptake preference by the bloom-forming algae was also related to the variation in ambient N concentrations. Published by Elsevier B.V.

Preparation of low-molecular-weight and high-sulfate-content chitosans under microwave radiation and their potential antioxidant activity in vitro

In the present paper microwave radiation has been used to introduce N-sulfo and O-sulfo groups into chitosan with a thigh degree of substitution and low-molecular weight. The sulfation of chitosan was performed in microwave ovens. It was found that microwave heating is a convenient way to obtain a wide range of products of different degrees of substitution and molecular weight only by changing reaction time or/and radiation power. Moreover, microwave radiation accelerated the degradation of sulfated chitosan, and the molecular weight of sulfated chitosan was considerably lower than that obtained by traditional heating. There are no differences in the chemical structure of sulfated chitosan obtained by microwave and by conventional technology. FTIR and C-13 NMR spectral analyses demonstrated that a significantly shorter time is required to obtain a satisfactory degree of substitution and molecular weight by microwave radiation than by conventional technology. In this present paper, we also determined antioxidant activity of low-molecular-weight and high-sulfate-content chitosans (LCTS). The results showed LCTS could scavenge superoxide and hydroxyl radical. Its IC50 is 0.025 and 1.32mg/mL, respectively. It is a potential antioxidant in vitro. (C) 2004 Published by Elsevier Ltd.

Corrosion behaviour of hot dip zinc and zinc-aluminium coatings on steel in seawater

A comparative investigation of hot dip Zn-25Al alloy, Zn-55Al-Si and Zn coatings on steel was performed with attention to their corrosion performance in seawater. The results of 2-year exposure testing of these at Zhoushan test site are reported here. In tidal and immersion environments, Zn-25Al alloy coating is several times more durable than zinc coating of double thickness. At long exposure times, corrosion rate for the Zn-25Al alloy coating remains indistinguishable from that for the Zn-55Al-Si coating of similar thickness in tidal zone, and is two to three times lower than the latter in immersion zone. The decrease in tensile strength suggested that galvanized and Zn-55Al-Si coated steel suffer intense pitting corrosion in immersion zone. The electrochemical tests showed that all these coatings provide cathodic protection to the substrate metal; the galvanic potentials are equal to - 1,050, - 1,025 and - 880 mV (SCE) for zinc, Zn-25Al alloy and Zn-55Al-Si coating, respectively, which are adequate to keep the steel inside the immunity region. It is believed that the superior performance of the Zn-25Al alloy coating is due to its optimal combination of the uniform corrosion resistance and pitting corrosion resistance. The inferior corrosion performance by comparison of the Zn coating mainly results from its larger dissolution rate, while the failure of the Zn-55Al-Si coating is probably related to its higher susceptibility to pitting corrosion in seawater.

Suitability of extractants for predicting available sulfur in natural grassland in the Inner Mongolia steppe of China

It was the objective of this study to compare the suitability of different extractants for predicting the availability of sulfur (S) in natural grassland in a sulfur response trial on three different soil types in the Inner Mongolia steppe of China. For soil analysis, seven different extractants have been employed. The inorganic SO4-S concentration was determined by ion chromatography. Additionally, in the Ca(H-2-PO4)(2) extract the total soluble S was determined employing turbidimetry. Weak salt solutions (0.15% CaCl2, Ca(H2PO4)(2), and KH2PO4) extracted similar amounts Of SO4-S. Extraction with 0.025 M KCl provided the lowest SO4-S values. Deionized water dissolved significantly more SO4-S in the control plots than most weak salt extractants. The concentration of soluble organic S decreased in the control plots after 100 days of plant growth, indicating that the organic S pool contributed significantly to the S nutrition of the forage crops. Significant relationships among the SO4-S in the soil determined in different extracts and crop yield, sulfur content in the forage, and total sulfur uptake were only found for the Ca(H2PO4)(2) extract. In general, the correlation coefficients proved to be unsatisfactory for field experimentation.

高温高压和不同氧逸度控制下单晶橄榄石电导率的实验研究

在1．0—4．0GPa，1123—1473K和控制氧逸度（Ni＋NiO，Fe＋Fe3O4，Fe＋FeO和Mo＋MoO2等4种氧缓冲剂）的条件下，借助YJ-3000t紧装式六面顶高温高压设备和Sarhron-1260阻抗／增益-相位分析仪，就位测定了橄榄石的电导率．实验结果表明：（1）在测定的频率范围（10^3-10^6Hz），样品的电导率对频率具有很强的依赖性；（2）随着温度（T）升高，电导率（σ）增大，lgσ与1／T之间符合Arrhenius关系；（3）在Fe＋Fe3O4氧缓冲条件下，随着压力升高，电导率降低，而活化焓和指前因子增大，并给出样品的活化能和活化体积分别为（1．25±0．08）eV和（0．105±0．025）cm^3·mol；（4）在给定的压力和温度下，随着氧逸度增加，电导率增大，活化焓降低；（5）小极化子导电机制可为橄榄石在高温高压下的导电行为提供合理的解释.