金黄色葡萄球菌肠毒素B基因的克隆和在大肠杆菌中高效表达

利用PCR方法从金黄色葡萄球菌TSTw基因组DNA中扩增出约 70 0bp的DNA片段 ,将之克隆到pGEM 7Zf(+)载体上并转化大肠杆菌DH5α菌株。重组质粒的测序结果表明克隆到了seb基因 ,它含有 717bp(不包括N端81bp的信号肽编码区 ) ,其核苷酸序列与文献报道完全一致。将其连接于表达载体 7ZTS上 ,转化到大肠杆菌JM10 9(DE3)内。表达的SEB占总蛋白 33.5 %。

基于遥感-过程耦合模型的1988～2004年青海三江源区净初级生产力模拟

三江源区不仅是地处青藏高原的全球气候变化的敏感区,也是我国甚至亚洲最重要河流的上游关键源区。作为提供物质基础的植被净初级生产力(Netprimaryproduction,NPP),是评价生态系统状况的重要指标。该文应用已在碳通量观测塔验证,扩展到区域水平的遥感-过程耦合模型GLOPEM-CEVSA,以空间插值的气象数据和1km分辨率的AVHRR遥感反演的FPAR数据为模型主要输入,模拟并分析了1988～2004年该区NPP时空格局及其控制机制。结果表明,该区植被平均NPP为143.17gC·m–2·a–1,呈自东南向西北逐渐降低的空间格局,其中,以森林NPP最高(267.90gC·m–2·a–1),其次为农田(222.94gC·m–2·a–1)、草地(160.90gC·m–2·a–1)和湿地(161.36gC·m–2·a–1),荒漠最低(36.13gC·m–2·a–1)。其年际变化趋势在空间上呈现出明显的差异,西部地区NPP表现为增加趋势,每10a增加7.8～28.8gC·m–2;而中、东部表现为降低趋势,每10a降低13.1～42.8gC·m–2。根据显著性检验,NPP呈增加趋势(趋势斜率b>0),显著性水平高于99%和95%的区域占研究区总面积的13.43%和20.34%,主要分布在西部地区;NPP呈降低趋势(趋势斜率b<0),显著性水平高于99%和95%的区域占研究区面积的0.75%和3.77%,主要分布在中、东部地区,尤以该区长江和黄河等沿线区分布更为集中,变化显著性也更高。三江源NPP的年际变化趋势的气候驱动力分析表明,整个区域水平上该地区植被生产力受气候变化的主导,西部地区暖湿化趋势,造成了该地区生产力较为明显的、大范围的增加趋势;但东、中部地区则主要受人类活动的影响,特别是长江、黄河等河流沿线,是人类居住活动密集的地区,造成这些地区放牧压力较大、草地退化严重,而该地区暖干化趋势加剧了这一过程。

Biodegradable Interpolyelectrolyte Complexes Based on Methoxy Poly(ethylene glycol)-b-poly(alpha,L-glutamic acid) and Chitosan

We synthesized methoxy poly(ethylene glycol)-b-poly(alpha,L-glutamic acid) (mPEGGA) diblock copolymer by ring-opening polymerization of N-carboxy anhydride of gamma-benzyl-L-glutamate (NCA) using amino-terminated methoxy polyethylene glycol (mPEG) as macroinitiator. Polyelectrolyte complexation between mPEGGA as neutral-block-polyanion and chitosan (CS) as polycation has been scrutinized in aqueous solution as well as in the solid state.

The influence of variant PE-b-PEO segments on physical properties of LLDPE graft copolymers

A method was adopted to fix a series of polymers of PE-b-PEO with different PEO/PE segments on the chains of LLDPE. Maleic anhydride (MA) reacting with hydroxyl group of PE-b-PEO (mPE-b-PEO) was used as the intermediate. The structures of intermediates and graft copolymers were approved by H-1 NMR and FTIR. XPS analysis revealed a great amount of oxygen on the surface of grafted copolymers although the end group of PEO was fixed on the LLDPE chains through MA. Thermal properties of the graft copolymers as determined by differential scanning calorimetry (DSC) showed that PE segments in the grafted monomers could promote the heterogeneous nucleation of the polymer, increase T., and crystal growth rate.

Guest inducing p-sulfonatocalix[4] arene into three-dimensional capsule architecture and a mixed A-B double layer framework

The reactions of sodium p-sulfonatocalix[4]arene (Na5L) and terbium/europium(III) chloride in the presence of pyrazine-N,N'-dioxide (PNNO) in aqueous solutions gave the crystalline complexes 1 and 2. Both structures contain molecular capsules of p-sulfonatocalix[4] arene with PNNO as guest molecules in the cavity of the calix[4]arenes. The molecular capsules are connected through sodium and terbium (or europium) centers forming a three-dimensional framework.

Crystallization and morphology of poly(ethylene oxide-b-lactide) crystalline-crystalline diblock copolymers

The crystallization behaviors and morphology of asymmetric crystalline-crystalline diblock copolymers poly(ethylene oxide-lactide) (PEO-b-PLLA) were investigated using differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD), and microscopic techniques (polarized optical microscopy (POM) and atomic force microscopy (AFM)). Both blocks of PEO5-b-PLLA(16) can be crystallized, which was confirmed by WAXD, while PEO block in PEO5-b-PLLA(30) is difficult to crystallize because of the confinement induced by the high glass transition temperature and crystallization of PLLA block with the microphase separation of the block copolymer.

Molecular weight dependence of phase Behavior of PEO/P(EO-b-DMS) blends: Application of Sanchez-Lacombe lattice fluid theory

Molecular weight dependence of phase separation behavior of the Poly (ethylene oxide) (PEO)/Poly(ethylene oxide-block-dimethylsiloxane) (P(EO-b-DMS)) blends was investigated by both experimental and theoretical methods. The cloud point curves of PEO/P(EO-b-DMS) blends were obtained by turbidity method. Based on Sanchez-Lacombe lattice fluid theory (SLLFT), the adjustable parameter, epsilon*(12)/k (quantifying the interaction energy between different components), was evaluated by fitting the experimental data in phase diagrams. To calculate the spinodals, binodals, and the volume changes of mixing for these blends, three modified combining rules of the scaling parameters for the block copolymer were introduced.

The phase behavior of comblike block copolymer A(m+1)B(m)/homopolymer A mixtures

The phase behaviors of comblike block copolymer A(m+1)B(m)/homopolymer A mixtures are studied by using the random phase approximation method and real-space self-consistent field theory. From the spinodals of macrophase separation and microphase separation, we can find that the number of graft and the length of the homopolymer A have great effects on the phase behavior of the blend. For a given composition of comblike block copolymer, increasing the number of graft does not change the macrophase separation spinodal curve but decreases the microphase separation region. The addition of a small quantity of long-chain homopolymer A increases the microphase separation of comblike block copolymer/homopolymer A mixture.

Hybridization of poly(4-vinyl pyridine)-b-polystyrene-b-poly(4-vinyl pyridine) aggregates in dioxane/water solution

Self-assembly of binary blends of two triblock copolymers of poly(4-vinyl pyridine)-b-polystyrene-b-poly(4-vinyl pyridine), i.e., P4VP(43)-b-PS260-b-P4VP(43) (P1) and P4VP(43)-b-PS366-b-P4VP(43) (P2), in dioxane/water solution was studied. These two triblock copolymers individually tend to form vesicles (P2) and cylindrical micelles (P1) in dilute solution. It was found that copolymer components in the blend, sample preparation method, and annealing time had significant effect on hybridization aggregate morphology. By increasing P1 content in the copolymer blends, fraction of looped and stretched cylinders increased, while fraction of bilayers decreased. Nearly no bilayer was observed when P1 content was above 85 wt%.

利用MALDI-TOF质谱技术研究MPEG-b-PCL两嵌段共聚物的嵌段长度及嵌段分布

利用基质辅助激光解吸电离飞行时间质谱(MALDI-TOFMS)结合源后分解(PSD)技术对甲氧基封端的聚乙二醇-b-聚己内酯(MPEG-b-PCL)两嵌段共聚物进行了结构分析.根据得到的MALDI-TOFMS谱图和PSD碎片信息清晰地确定了嵌段共聚物的嵌段长度和嵌段分布.结果表明,采用MALDI-TOFMS结合PSD技术研究这类嵌段共聚物链结构非常有效.这为更好地认识和应用这类嵌段共聚物提供了重要的依据,同时也建立了分析这类嵌段共聚物的方法.

温度敏感性PNIPAM-b-PZLL-b-mPEG三嵌段共聚物的合成与自组装研究

通过大分子引发剂引发ε-苄氧羰基-L-赖氨酸-N-羧酸酐(Lys-NCA)开环聚合和大分子缩合的方法合成了聚(N-异丙基丙烯酰胺)-b-聚(ε-苄氧羰基-L-赖氨酸)-b-聚乙二醇单甲醚三嵌段共聚物(PNIPAM-b-PZLL-b-mPEG).用GPC和1H-NMR对其结构进行了表征.用芘荧光探针法证明了该三嵌段聚合物形成胶束的性质并测定了临界胶束浓度(CMC).动态光散射(DLS)研究表明,在固定PNIPAM-b-PZLL链段长度的情况下,mPEG分子量为2000时,胶束在温度高于临界溶解温度(LCST)时发生聚集,mPEG分子量为5000时,胶束在LCST以上没有发生聚集.

PS-b-P4VP/CoSm杂化材料的制备及其磁性能

用溶液相金属盐沉积法在苯乙烯与4-乙烯基吡啶嵌段共聚物(PS-b-P4VP)胶束中制备了平均直径为12 nm的PS-b-P4VP/Co、PS-b-P4VP/CoSm(nCo∶nSm=3.8∶1,13.0∶1)、PS-b-P4VP/Sm纳米粒子。胶束溶液通过高温回流使磁性成核粒子和磁性金属原子的流动能力和扩散能力提高而获得尺寸均一的颗粒。

Preparation of Prussian blue@Pt nanoparticles/carbon nanotubes composite material for efficient determination of H2O2

In this study, the fabrication of an efficient amperometric hydrogen peroxide sensor with favorable properties is presented. Prussian blue (PB) was catalytically synthesized by Pt nanoparticles (Pt-nano) from ferric ferricyanide aqueous solution to form PB@Pt-nano hybrid, and it was confirmed by transmission electron microscope (TEM) and optical spectra. The electrochemical behavior of PB@Pt-nano was highly improved through its integration with poly(diallyldimethylammonium chloride) modified carbon nanotubes (PCNTs).