Synthesis, structure, photoluminescence, and electroluminescence properties of a new dysprosium complex

A new dysprosium complex Dy(PM)(3)(TP)(2) [where PM = 1-phenyl-3-methyl-4-isobutyryl-5-pyrazolone and TP = triphenyl phosphine oxide] was synthesized, and its single-crystal structure was also studied. Its photophysical properties were studied by absorption spectra, emission spectra, fluorescence quantum efficiency, and decay time of the f-f transition of the Dy3+ ion. In addition, the antenna effect was introduced to discuss the energy transfer mechanism between the ligand and the central Dy3+ ion. Finally, a series of devices with various structures was fabricated to investigate the electroluminescence (EL) performances of Dy(PM)(3)(TP)(2). The best device with the structure ITO/CuPc 15 nm/Dy complex 70 nm/BCP 20 nm/AlQ 30 nm/LiF 1 nm/Al 100 nm exhibits a maximum brightness of 524 cd/m(2), a current efficiency of 0.73 cd/A, and a power efficiency of 0.16 lm/W, which means that a great improvement in the performances of the device was obtained as compared to the results reported in published literature. Being identical to the PL spectrum, the EL spectrum of the complex also shows characteristic emissions of the Dy3+ ion, which consist of a yellow band at 572 nm and a blue emission band at 480 nm corresponding to the F-4(9/2)-H-6(13/2) and F-4(9/2)-H-6(15/2) transition of the Dy3+ ion, respectively. Consequently, an appropriate tuning of the blue/yellow intensity ratio can be presumed to accomplish a white luminescent emission.

A novel white light emitting long-lasting phosphor

A novel white light emitting long-lasting phosphor Cd1-xDyxSiO3 is reported in this letter. The Dy3+ doped CdSiO3 phosphor emits white light. The phosphorescence can be seen with the naked eye in the dark clearly even after the 254 nm UV irradiation have been removed for about 30 min. In the emission spectrum of 5% Dy3+ doped CdSiO3 phosphor, there are two emission peaks of Dy3+, 580 mn (F-4(9/2)-->H-6(13/2)) and 486 nm (F-4(9/2)-->H-6(15/2)), as well as a broad band emission located at about 410 nm. All the three emissions form a white light with CIE chromaticity coordinates x=0.3874, y=0.3760 and the color temperature is 4000 K under 254 mn excitation. It indicated that this phosphor is a promising new luminescent material for practice application.

Dy3+- and Eu3+-doped LaGaO3 nanocrystalline phosphors for field emission displays

Nanocyrstalline LaGaO3 and Dy3+- and Eu3+-doped LaGaO3 were prepared through a Pechini-type sol-gel process. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), photoluminescence, cathodoluminescence spectra, and lifetimes were utilized to characterize the samples. XRD reveals that the samples begin to crystallize at 900 degrees C and pure LaGaO3 phase can be obtained at 1000 degrees C. FE-SEM images indicate that the Dy3+- and Eu3+-doped LaGaO3 samples are both composed of aggregated spherical particles with sizes ranging from 40 to 80 nm. Under the excitation of ultraviolet light and low voltage electron beams (1-5 kV), the undoped LaGaO3 sample shows a strong blue emission peaking at 433 nm, and the Dy3+- and Eu3+-doped LaGaO3 samples show their characteristic emissions of Dy3+ (F-4(9/2)-H-6(15/2) and F-4(9/2)-H-6(13/2) transitions) and Eu3+ (D-5(0,1,2)-F-7(1,2,3,4) transitions), respectively. The relevant luminescence mechanisms are discussed.

Fabrication and luminescence properties of Y2SiWO8 : Dy3+ phosphors via sol-gel process

(YSiWO8)-Si-2:Dy3+ phosphors were prepared through a sol-gel process. XRD and photoluminespectra were used to characterize the resulting phosphors. The results indicated that the phosphors crystallized completely at 1000 degrees C. In Y2SiWO8:Dy3+ phosphors, the Dy3+ showed its characteristic yellow emission at 483nm (F-4(9/2)-H-6(5/2)) and 575nm (F-4(9/2)-H-6(13/2)) upon excitation into 275nm.

Luminescence of the compounds Y0.5-xLi1.5VO4 :(Dy3+,Eu3+)

In this paper for the first time the compounds Y0.5-xLi1.5VO4:(Dy3+, Eu3+),(YLV:Dy,Eu) (0.01

Luminescent self-assembled thin films based on rare earth-heteropolytungstate

earth (Eu3+, Dy3+)-heteropolytungstate thin films were fabricated by self-assembly method successfully. The thin films give off strong fluorescence, which can be observed by eyes upon UV irradiation. The characteristic emission behaviors of the rare earth ions in self-assembled thin film were investigated compared with those of the corresponding solids. It is noticed that the intensity ratio between D-5(0) --> F-7(2) and D-5(0) --> F-7(1) of Eu3+ and the intensity ratio between F-4(9/2) --> H-6(13/2) and F-4(9/2) --> H-6(15/2) of Dy3+ in the self-assembled films are different from those of the corresponding solids. Furthermore, the self-assembled films present shorter fluorescence lifetimes than the corresponding solids. The reasons for these results have been discussed.

Real-time analysis of the interaction between calmodulin and melittin by SPR spectroscopy

The dynamic interaction process of calmodulin with an immobilized peptide melittin was investigated in real time by surface plasmon resonance spectroscopy, and dissociation constant of the complex was calculated to be 3.37 x 10(-6) mol/L.

YAG∶Nd中Pr,Sm,Dy杂质对其光谱的影响

采用溶胶 -凝胶法合成了YAG∶Nd ,Re(Re =Pr,Sm ,Dy)系列化合物 ,研究了它们的光谱性质 .结果表明 :Pr3 + ,Sm3 + ,Dy3 + 对YAG基质中Nd3 + 的发光具有猝灭作用 ,属于有害杂质 ,在激光晶体原料中必须除去

镧对小鼠肝脏中几种酶活性的影响

分别从体内作用和体外作用两个方面研究了镧对鼠肝脏中的胆碱脂酶、异柠檬酸脱氢酶、谷丙转氨酶活性的影响 ,同时用电感耦合等离子质谱 (ICP -MS)研究了镧在肝脏中的累积情况 .结果表明 :经尾静脉注射后镧在肝脏中有明显的累积现象 ,其累积量随给药剂量的增大而增加 ;镧对上述三种酶的活性均表现出低剂量激活 ,高剂量抑制的Hormesis效应

用荧光光谱和紫外-可见差谱研究抗体-卟啉的相互作用

meso-四 (α,α,α,α-O-苯乙酰苯 )卟啉与其单克隆抗体 1 F2结合后 ,产生显著的增色效应 ,反映了卟啉与抗体之间刚性紧密的结合 ,在抗体中的抗原结合部位存在芳香族氨基酸 .用同步荧光光谱结合荧光猝灭法得到抗体抗原结合部位的芳香族氨基酸主要为色氨酸和酪氨酸 ,但酪氨酸的残基数要少于色氨酸 .卟啉与抗体的结合比为 1∶ 1 ,解离常数 (2 .0 84± 0 .2 46)× 1 0 - 1 0 mol/L,可见卟啉与 Mc Ab1 F2有很高的亲和力.

高分子化铁系烯烃聚合催化剂的合成及乙烯聚合

合成了含烯丙基不对称型的“茂后”催化剂[ArN=C（Me）][Ar’N=C（Me）]C5H3NFeCl2[Ar=2,6-（i-Pr）2C6H3,Ar’=4-烯丙基-2,6-（i-Pr）2C6H3],通过IR,1H NMR,EI-MS,EA对化合物进行表征.利用这个催化剂上的烯烃基团在自由基引发下与苯乙烯共聚,制备出高分子化的“茂后”催化剂.研究了高分子化前后催化剂催化乙烯聚合行为,高分子化的催化剂在常压13℃下催化乙烯聚合时,活性最高达到2.5×106g PE/mol Fe·h,高于未高分子化之前催化剂的活性.证明了高分子化是“茂后”催化剂理想的固载化方式.

环丙烷衍生物在D_2O离子体系中的H/D交换反应

在Ｄ_２Ｏ化学反应气条件下研究了环丙烷衍生物的Ｈ／Ｄ交换反应特性。发现了三种新的 产物离子［Ｍ＋１］~＋、［Ｍ＋２］~＋和［Ｍ＋３］~＋．应用碰撞诱导碎裂（ＣＩＤ）技术研究了这些离子的碎裂反应 特性。实验结果表明三种新的产物离子是由反应物与试剂离子之间发生Ｈ／Ｄ交换反应生成的。并 获得了环丙烷衍生物结构中活泼氢位置及其数量的信息。