黄土高原水土保持措施对侵蚀土壤发育的效应

水土保持工程及植被措施实施,对土壤形成条件、土壤特征及土壤发育产生一定影响,而侵蚀土壤发育程度是评价土壤质量变化及其生态环境效应的重要基础。研究黄土高原水土保持措施对侵蚀土壤理化性质、发育和功能的影响,可为水土保持综合治理,改善黄土高原生态环境提供依据。评述长期定位试验的方法及以空间代替时间的原理,研究了在实施不同水土保持措施后,土壤基本理化性状的变化特征。结果表明:随着措施实施年限的增加,土壤的水分环境和土壤有机碳含量发生了明显改善,对土壤结构和功能产生了影响。证明水土保持措施对侵蚀土壤的发育有一定促进作用。

Recent advances in synthesis and properties of cubic boron nitride films

Cubic boron nitride (c-BN) attracts widespread interest as a promising material for many potential applications because of its unique physical and chemical properties. Since the 1980's the research in c-BN thin films has been carried out, which reached its summit in the mid of 1990's, then turned into a downward period. In the past few years, however, important progress was achieved in synthesis and properties of cubic boron nitride films, such as obtaining > 1 mu m thick c-BN films, epitaxial growth of single crystalline c-BN films, and advances in mechanics properties and microstructures of the interlayer of c-BN films. The present article reviews the current status of the synthesis and properties of c-BN thin films.

Fabrication and emission properties of Er3+/Yb3+ codoped tellurite glass fiber for broadband optical amplification

Tellurite glass is proposed as a host for broadband erbium-doped fiber amplifiers because of their excellent optical and chemical properties. A new single mode Er3+/Yb3+ codoped tellurite fiber with D-shape cladding geometry is fabricated in this work. When pumped at 980 nm, a broad erbium amplified spontaneous emission (ASE) nearly 100 nm in the wavelength range of 1450-1650 ran around 1.53 mu m is observed. It was found that the emission spectrum from erbium in tellurite glass fibers is almost twice as broad as the corresponding spectrum in tellurite bulk glass. The changes in ASE with regard to fiber lengths and pumping power were measured and discussed. The output of about 2.3 mW from Er3+/Yb3+ codoped tellurite fiber ASE source is obtained under the pump power of 700 mW. The broad 1.53 mu m emission of Er3+ in Er3+/Yb3+ codoped tellurite glass fiber can be used as host material for potential broadband optical amplifier and tunable fiber lasers. (c) 2005 Elsevier B.V. All rights reserved.

Influence of TeO2, PbF2, ZnF2 on the spectroscopic and lasing properties of Yb3+ doped fluorophosphate glass

The influence of TeO2 on the crystallization stability, thermal stability, spectroscopic and lasing properties of Yb3+ doped fluorophosphate (FP) glass was studied. It is shown that 2 mol% TeO2 is the optimum doping amount which results in better spectroscopic and lasing properties as well as improve the crystallization and thermal stabilities of the glass. In order to enhance the physical and optical properties further, the effect of PbF2 and ZnF2 to the TeO2 contained FP glasses is also investigated, which shows that PbF2 has advantages in improving the crystallization properties while ZnF2 is preferable in enhancing spectroscopic and lasing properties. Results indicate that the co-existence of TeO2, PbF2 or ZnF2 is an effective way to enhance the spectroscopic, lasing and physical properties of Yb3+ doped FP glasses. (c) 2004 Published by Elsevier B.V.

Differentiate performance of eight filter media in vertical flow constructed wetland: Removal of organic matter, nitrogen and phosphorus

A comparative study was conducted to reveal the differentiate effects of eight different filter media including gravel, zeolites, anthracite, shale, vermiculite, ceramic filter media, blast furnace steel slag and round ceramsite. The study mainly related to the eight different filter media's removal performances of organic matter, nitrogen and phosphorus in the vertical flow constructed wetland simulated system, which treating wastewater at hydraulic loading rate of 1000-2500 mm/d. The results indicated that the removal effects were closely related to the physical and chemical properties of medium materials. Anthracite-filled system had the highest removal rate for the total organic carbon (TOC), up to 70%, and the removal rates of other systems ranged from 20% to 30%. As for the five-day biochemical oxygen demand (BOD5), anthracite-filled and steel slag-filled systems had the highest removal rates, also up to 70%, as well as other systems all exceeded 50%. At the same time, for the total nitrogen (TN) and NH4(+)-N, the zeolites-filled and ceramic-filled systems had the best performances with the removal rates of more than 70%, the other way round, the removal rates of other systems were only about 20%. The distinguishable effects were also observed in removal performances of total phosphorus (TP) and total dissoluble phosphorus (TDP). The removal rates of TP and TDP in steel slag-filled systems were more than 90%, a much higher value, followed by that of the anthracite-filled system, more than 60%, but those of other systems being the less. Our study provided a potential mechanism to optimize the filter media design for the vertical flow constructed wetlands.

对间隙淋洗长期通气培养条件下黄土高原土壤供氮能力的评价

采用间隙淋洗长期通气培养法,通过对黄土高原物理化学性质差异较大的10种农田土样起始矿质氮、起始提取态总氮、起始可溶性有机氮,以及培养期间淋洗矿质氮、淋洗总氮、可溶性有机氮含量及其与作物吸氮量关系的研究,分析并评价黄土高原主要农田土壤氮素矿化能力以及包括和不包括培养淋洗可溶性有机氮对土壤供氮能力的影响。结果表明,供试土样起始可溶性有机氮平均为N 23.9 mg/kg,是起始提取态总氮的28.8%,土壤全氮的2.4%。在通气培养淋洗总氮中,可溶性有机氮所占比例不高,经过217 d通气培养,淋洗出的可溶性有机氮平均为N 28.8mg/kg,占淋洗总氮量的19.8%。相关分析表明,淋洗可溶性有机氮量与第l季作物吸氮量相关不显著,但与连续2季作物总吸氮量显著相关。淋洗矿质氮、淋洗总氮与两季作物总吸氮量的相关系数明显高于与第一季作物吸氮量的相关系数;与第一季作物吸氮量达显著相关水平,与连续两季作物吸氮量达极显著相关水平。总体上看,可溶性有机氮和土壤全氮、土壤微生物氮不能作为反映短期可矿化氮的指标;间隙淋洗通气培养淋洗液中淋洗矿质氮、淋洗总氮是评价可矿化氮的较好指标,不仅适宜于第一季作物,而且也适用于对连续两季作物土壤供氮...

不同施肥制度对辽西褐土理化性状的影响研究

本文通过一组中期肥料试验研究分析了几种施肥制度对辽宁西部半干旱区褐土理化性状的影响，结果表明：通过物质循环再利用是保持土壤肥力的有效措施，它可使土壤有机质、全氮、全磷和速效磷含量显著提高。连续11年的作物产量表明，有机无机相结合施肥制度下该系统不但获得了最高的作物产量，而且产量受外界影响最小，系统稳定性最好。无机农业施肥制度的不同投磷方式对土壤理化性状有一定的影响，其作用是相近的，与无磷处理相比土壤结构和水分特性表现出改善的趋势。综上所述，有机无机相结合施肥制度对辽西半干旱地区建立适合该地农田生态系统良性循环的优化经营模式，不断改善土壤生态环境，促进农业生产持续发展，有重要的理论和实践意义。

Surface Initiated Polymerization from Substrates of Low Initiator Density and Its Applications in Biosensors

Surface initiated polymerization (SIP) has become an attractive method for tailoring physical and chemical properties of surfaces for a broad range of applications. Most of those application relied on the merit of a high density coating. In this study we explored a long overlooked field of SIP. SIP from substrates of low initiator density. We combined ellipsometry with AFM to investigate the effect of initiatior density and polymerization time on the morphology of polymer coatings. In addition, we carefully adjusted the nanoscale separation of polymer chains to achieve a balance between nonfouling and immobilization capacities. We further tested the performance of those coating on various biosensors, such as quartz crystal microbalance, surface plasmon resonance, and protein microarrays. The optimized matrices enhanced the performance of those biosensors. This report shall encourage researches to explore new frontiers in SIP that go beyond polymer brushes.

Structure and acidity of Mo/H-MCM-22 catalysts studied by NMR spectroscopy

A comprehensive study on physical and chemical properties of Mo/MCM-22 bifunctional catalysts has been made by using combined analytic and spectroscopic techniques, such as adsorption, elemental analysis, and Xe-129 and P-31 NMR of adsorbed trialkylphosphine oxide probe molecules. Samples prepared by the impregnation method with Mo loadings ranging from 2-10 wt.% have been examined and the results are compared with that obtained from samples prepared by mechanical mixing using MoO3 or Mo2C as agents. Sample calcination treatment is essential in achieving a well-dispersed metal species in Mo/MCM-22. It was found that, upon initial incorporation, the Mo species tend to inactivate both Bronsted and Lewis sites locate predominantly in the supercages rather than the 10-membered ring channels of MCM-22. However, as the Mo loading exceeds 6 wt.%, the excessive Mo species tend to migrate toward extracrystalline surfaces of the catalyst. A consistent decrease in concentrations of acid sites with increasing Mo loading < 6 wt.% was found, especially for those with higher acid strengths. Upon loading of Mo > 6 wt.%, further decreases in both Bronsted and Lewis acidities were observed. These results provide crucial supports for interpreting the peculiar behaviors previously observed during the conversion of methane to benzene over Mo/MCM-22 catalyst under non-oxidative conditions, in which an optimal performance was achieved with a Mo loading of 6 wt.%. The effects of Mo incorporation on porosity and acidity features of the catalyst are discussed. (C) 2004 Published by Elsevier B.V.

人工苜蓿草地土壤理化性状变化

为了明确西北旱地种植苜蓿对土壤物理性状、水分和养分的影响,对其进行了较为详尽地探讨。种植苜蓿能增加土壤团聚体含量,提高土壤通气透水能力。苜蓿生长发育时需要大量消耗土壤水分,连续多年种植苜蓿会导致土壤干燥化;种植苜蓿能提高土壤有机质和氮素水平,降低土壤磷、钾含量。施肥既能平衡土壤养分又能增加产草量。

中国水蚀土壤抗剪强度研究

利用野外测试数据、土壤样品的室内理化分析数据和参考文献数据 ,对水蚀区范围内水土流失过程中的土壤抗剪强度进行了初步研究 ,建立了中国水土流失土壤抗剪强度的回归模型 ,总结出水蚀区范围内水蚀过程中有关土壤抗剪强度的 3条结论 :影响水土流失过程中土壤抗剪强度的主导因素是容重、粉 /黏、土壤含水量、土壤有机质含量 ;抗剪强度随土壤类型发生有规律的变化 ;抗剪强度在中国水蚀区范围内有较明显的空间分异规律 (包括水平分异规律和垂直剖面构型规律 )

农牧交错带不同人工植被下荒漠化土壤肥力的变化

研究了陕北农牧交错带荒漠化土地上种植人工植被后,在不同的植被恢复类型和生长状态下土壤物理、化学和生物学性状的特征。结果表明,随着人工植被的建立与生长,土壤肥力总体趋于好转,土壤理化性质得到显著改善,土壤质地变细,微生物数量增加,土壤酶活性增强;同时,使流动沙地向半固定、固定沙丘方向转化。但随着植被盖度和植被种类的不同,不同样地土壤肥力差异很大;多年生乔木林改良土壤肥力的潜力最高,耕作粗放的农地土壤肥力有所下降。

Metal nanomaterials and carbon nanotubes - synthesis, functionalization and potential applications towards electrochemistry

This review focuses on the synthesis, assembly, surface functionalization, as well as application of inorganic nanostructures. Electrochemical and wet- chemical methods are demonstrated to be effective approaches to make metal nanostructures under control without addition of a reducing agent or protecting agent. Owing to the unique physical and chemical properties of the nano-sized materials, novel applications are introduced using inorganic nanomaterials, such as electrocatalysis, photoelectricity, spectrochemistry, and analytical chemistry.