Reflection of shock-wave in pur foam from rigid wall

Keller proposed that a building, a mechanical installation or a body wrapped bya layer of foam plastics may be an efficient means for protection from damage ofblast wave. However, the practical effect was beyond expectation. For example, agunner wearing the foam plastics-padded waistcoat was injured more seriously by theblast wave from a muzzle. Monti took the foam plastics as homogeneous two-phasemedium and analyzed it with the theory of dusty flow. The obtained results showthat the peak pressure behind the reflected shock wave from rigid wall with foamcoat exceeds obviously that without foam coat under the same condition. Gel'fand,Patz and Weaver made experimental observations by means of shock tubes and veri-

Numerical Partition of Energy Absorption of Foam-filled Top-Hat and Double-Hat Sections

The interaction effect, i.e., the contribution of each component to the total energy absorption of an axially crushed foam-filled hat section was investigated quantitatively via numerical simulation. The FE results were first verified by experimental work of aluminum foam-filled top-hat and double-hat sections, then the contribution of foam-fillers and that of hat sections to the overall energy absorption were quantitatively obtained, respectively. When foam-filled, increase in energy absorption was found both in hat section component and foam-filler component, whereas the latter contributes predominantly to the interaction effect.

Sexual behavior in a one-male unit of Rhinopithecus bieti in captivity

Data regarding the sexual behavior of black-and-white snub-nosed monkeys (Rhinopithecus bieti) were collected in 1998 in a one-male unit in captivity by all-occurrences sampling during the mating season. Before the present study, little was known about the sexual behavior of this species. This study showed that female solicitation is mainly expressed as "prostration plus glancing laterally" (PG) or "sitting plus head moving up and down" (HM), and male solicitation is exhibited by the "grunt bared-teeth display." The mount-to-ejaculation ratio was 5.2 on average, and single-mount ejaculations (SMEs) were observed in only 4.4% of mounts on days with at least one ejaculation. Therefore, the main copulatory pattern of this species is multiple-mount ejaculation (MME). Females initiated 72% of 18 ejaculatory mounts. Females initiated more ejaculatory mounts than non-ejaculatory ones. In general, the patterns of sexual behavior in this species are similar to those reported for other Colobines. (C) 2004 Wiley-Liss, Inc.

PFU微型生物群落采样法研究有机氯污染物在水中相间分布

运用PFU微型生物群落采样法在武汉东湖取样研究了六六六、滴滴涕、六氯苯等有机氯污染物在水中相间分布。将PFU(Polyurethanefoamunit)取样得到的挤出液 ,经细胞固定、超声、消解及分步萃取等不同的预处理步骤后 ,用GC ECD测定了各部分提取物中α HCH、β HCH、γ HCH、δ HCH、HCB、pp′ DDE等有机氯污染物的浓度。并用四膜虫模拟试验检验了细胞固定化、消解过程对微型生物的作用效果。结果分析表明 ,以上有机物主要以微型生物富集或颗粒物强吸附形式存在于水中 ,颗粒物弱吸附形

PFU微型生物群落监测中异养性指数的应用研究及其分形分析

对常德和汉江的异养性指数(HI)进行了分形分析,表明异养性指数在二维空间分布具有自相似性.异养性指数数据点与化学综合污染指数(P)数据点在双对数坐标中分段拟合时,当常德和汉江的LogP分别小于0 602和0 493时,常德和汉江的分形维数分别为0 39332和0 74110;当常德和汉江的LogP大于0 602和0 493时,常德和汉江的分形维数分别为0 30678和0 27239.拐点的出现表明异养性指数的变化在两个尺度域内遵从着不同的规律.拐点尺度以前,分维数较高,表明群落组成复杂,群落所受污染压迫较

PFU微型生物群落水质鉴别及群落参数变化模式的研究

基于PFU微型生物群落参数调查数据,对湖北省汉江两条污染带11个站点和湖南常德市水系15个站点所属水质组别进行了综合分析研究.所得典型鉴别函数能够对水质组别作出有效的鉴别,分类函数对站点的水质组别分类正确率达到96%;群落参数对化学综合污染指数(P)的响应不呈简单的线性关系,群落参数的变化存在一定模式.提出了“转折区”(turninginterval)概念.水质由洁净到严重污染的变化过程中,在转折区内,微型生物群落的5个参数与P的相关性将发生根本性改变:D和Seq与P由正相关转变为负相关,T90%由负相关

对PFU法中MacArthur-Wilson平衡模型的修改

考虑到环境压迫的因素,对PFU法中的MacArthur-Wilson平衡模型作了修改,推导出一个更为适用的新模型。小野外生态试验和室内毒理试验中提出4个功能参数(S_(eq),G,H,T_(90％))用于环境的生物监测。使用Monte Garlo序贯随机模拟算法和Marquardt算法估计模型参数并完成计算机程序的编制,最后还使用拟合差异度法检验实验模型。

用PFU原生动物群落进行生物监测的研究

应用PFU法收集微型生物群落,监测鸭儿湖的农药污染。原生动物对五个氧化塘内农药废水的毒性反应,可用群集过程来表示,无论室内或是野外试验,结果基本一致。其中微型生物群落的结构参数有原生动物种类组成和种数、叶绿素a含量、水细菌数量;功能参数有反映原生动物群集过程中的S_(eq)、G、t_(90％)和微型生物的呼吸速度。功能和结构的参数均能较准确地反映出氧化塘系统的净化过程。PFU法可应用于预报污染物的生物效应浓度,初认为是一种经济、快速、正确的生物学监测方法。

用PFU法研究微型生物群集过程中数据的处理

根据MacArthur-Wilson的岛屿区系平衡模型S_t=S_(eq)(1-e~(GT)),可以从野外生态效应试验和室内毒性试验中,提出3个功能参数(S_(eq)、G、t_(90％))进行比较。本文提出两种计算方法:复合梯形法和最小二乘法,后者已在计算机上实现了BASIC计算程序。从数学理论上论证,最小二乘法误差较小,但如果实验布局合理,两种计算方法能得到十分一致的结果。实验模型是否符合理论模型,可以用统计学上的拟合差异度检验法来检验。

QtUCP-A program for determining unit-cell parameters in electron diffraction experiments using double-tilt and rotation-tilt holders

A computer program, QtUCP, has been developed based on several well-established algorithms using GCC 4.0 and Qt (R) 4.0 (Open Source Edition) under Debian GNU/Linux 4.0r0. it can determine the unit-cell parameters from an electron diffraction tilt series obtained from both double-tilt and rotation-tilt holders. In this approach, two or more primitive cells of the reciprocal lattice are determined from experimental data, in the meantime, the measurement errors of the tilt angles are checked and minimized. Subsequently, the derived primitive cells are converted into the reduced form and then transformed into the reduced direct primitive cell. Finally all the patterns are indexed and the least-squares refinement is employed to obtain the optimized results of the lattice parameters. Finally, two examples are given to show the application of the program, one is based on the experiment, the other is from the simulation. (C) 2008 Elsevier B.V. All rights reserved.

Synthesis and characterization of an active styrlthiophene monomer and its polyurethane with second-order optical nonlinearity

A novel monomer, (trans)-7-[4-N,N-(di-beta-hydroxyethyl) amino-benzene]-ethenyl-3,5-dinitrothiophene (HBDT), and the corresponding prepolymer, polyurethane were synthesized and characterized. The details of synthesis of the monomer and its further polymerization were presented. The prepolymer and polyurethane exhibited good thermal stability and good solubility in common organic solvents. The d(33) coefficient of the poled films was determined to be 40.3 pm/V. (C) 2000 Kluwer Academic Publishers.

Pool boiling heat transfer of ultra-light copper foam with open cells

High speed visualizations and thermal performance studies of pool boiling heat transfer on copper foam covers were performed at atmospheric pressure, with the heating surface area of 12.0 mm by 12.0 mm, using acetone as the working fluid. The foam covers have ppi (pores per inch) from 30 to 90, cover thickness from 2.0 to 5.0 mm, and porosity of 0.88 and 0.95. The surface superheats are from -20 to 190 K, and the heat fluxes reach 140 W/cm(2). The 30 and 60 ppi foam covers show the periodic single bubble generation and departure pattern at low surface superheats. With continuous increases in surface superheats, they show the periodic bubble coalescence and/or re-coalescence pattern. Cage bubbles were observed to be those with liquid filled inside and vented to the pool liquid. For the 90 ppi foam covers, the bubble coalescence takes place at low surface superheats. At moderate or large surface superheats, vapor fragments continuously escape to the pool liquid. Boiling curves of copper foams show three distinct regions. Region I and II are those of natural convection heat transfer, and nucleate boiling heat transfer for all the foam covers. Region III is that of either a resistance to vapor release for the 30 and 60 ppi foam covers, or a capillary-assist liquid flow towards foam cells for the 90 ppi foam covers. The value of ppi has an important effect on the thermal performance. Boiling curves are crossed between the high and low ppi foam covers. Low ppi foams have better thermal performance at low surface superheats, but high ppi foams have better one at moderate or large surface superheats and extend the operation range of surface superheats. The effects of other factors such as pool liquid temperature, foam cover thickness on the thermal performance are also discussed.